COIL - 2274 Annonces

Vendredi 02 septembre 2022

Prix : 1-10usd

Specification/model format: MTG2-1/2/3/4 As one of professional temperature transducer suppliers, we also provide SMD Thermistor, ntc diode, Epoxy Thermistor, Thin Film Thermistor and so on. Details Advantages Application Parameters Glass Thermistor Details Material of glass thermistor...

Vendredi 02 septembre 2022

VCM F1 adopts the traditional voice coil motor design scheme, linear motor structure is simple, high stability. Using high precision grating ruler as position feedback, position resolution accuracy is 25 bits. Digital encoder technology greatly improves positioning accuracy, in addition...

Vendredi 02 septembre 2022

Compared with the photoelectric analog galvanometer, the installation of the grating requires a larger space, so the encoder part at the bottom of the grating digital galvanometer is higher than that of the photoelectric analog galvanometer. The grating digital galvanometer is more...

Vendredi 02 septembre 2022

Han's galvo scanning system analog galvo driver board is designed for the full series of Han's Scanner photoelectric galvanometer motor, using the traditional PID closed-loop control mode, stable and reliable performance; with a variety of different configurations, support analog...

Jeudi 01 septembre 2022

This grade has 20% glass fiber filler. PA6 gf 20 has much greater heat-resistant mechanical properties than unfilled polyamide. Benefits of pa6 abs gf20 Flame retardant pa material Semi crystalline thermoplastic Good impact strength and stiffness Good low temperature performance ...

Jeudi 01 septembre 2022

In order to ensure that the tearing surface of the strip is smooth, it is necessary to ensure that the upper and lower knife planes are relatively parallel as much as possible. The rotary shear for annealing and galvanized lines produced by BOYA have undergone precise processing and...

Jeudi 01 septembre 2022

BOYA revamping and repair products, based on upgrading original products to new products, and ensure the new product is better in performance and quality, make the old products with renewed life vigor, in the process of upgrading, BOYA will identify the requirements fully, combine...

Jeudi 01 septembre 2022

BOYA multi-roll leveler is the core equipment of finishing process in metallurgical hot and cold rolling mill. By repeatedly bending and convex straightening of the strip, the strip can be straightened with high strength and precision; Widely used in high strength steel, precision steel strip...

Jeudi 01 septembre 2022

BOYA Precision Industrial Equipment Co., LTD. side trimmer, scrap chopper, flying shear, and other shear metallurgical equipment quality and delivery schedule are reliable. By differentiation development strategy with "We have what others have not, and ours are better in quality than others ...

Jeudi 25 août 2022

Prix : 100USD

① Micro-computer control, easy and labor-saving; ② 3L large capacity, suitable for 3-4 people; ③ 24-hour appointment, delicious food on time; ④ 6 function menu, you can be a chef in a seco+K7d; Safe and healthy Stainless steel filter. Occupying no space Winding coil base of storage type...

Samedi 20 août 2022

Prix : 1000-6000USD

Product Description of 33KV Series Cast Resin Dry Type Transformer The dry type transformer is called an epoxy resin dry type transformer dry type cast resin and uses epoxy resin as an insulating material. The high and low voltage windings are made of copper strip (foil). The epoxy...

Vendredi 19 août 2022

Quantité : more than - Prix : 3000-6500 euro per M

Description of Pickled Coils Pickling is a production procedure to remove the oxide scale on the cold rolled steel coil surface during steelmaking. The"pickle tank" that the cold rolled steel coil sink and runs in a diluted solution of inorganic acid, it usually chose to use the hydrochloric...

Vendredi 19 août 2022

Quantité : more than - Prix : 3000-6500 euro per M

Description of Iron Ore Concentrate Iron ore concentrate is produced from the magnetite iron ore in the beneficiation process. When the iron ore is mined, first it will be crushed by a crusher, after a preliminary screening, it is sent to the large gyrator crusher, and then the...

Vendredi 19 août 2022

Quantité : more than - Prix : 3000-6500 euro per M

Main Feature of prime hot rolled steel sheet Hot steel coils production is a rolling procedure that relates rolling steel at a high temperature (usually above 1700°F) and over the recrystallization temperature of steel. When the steel heating temperature is higher than the recrystallization...

Vendredi 12 août 2022

Prix : RMB300000-RMB3000000

RSM3/3 series glass fibre and carbon fibre multi axial warp knitting machine developed by Changzhou Run Feng Yuan Textile Machinery Manufacturing Co., Ltd. can bind warp knitting coils to warp, weft and oblique lining yarns through binding yarns to form multi-layer composite fabrics...

Vendredi 12 août 2022

Prix : RMB300000-RMB3000000

After years of R & D and practice, Changzhou runfengyuan Textile Machinery Manufacturing Co., Ltd. has successfully manufactured various models of high speed warp knitting machine and Raschel warp knitting machines. The products have a wide range of changes, high production efficiency...

Vendredi 12 août 2022

Prix : RMB300000-RMB3000000

The machine has one set of warp lining systems and one set of full-width weft insertion system, which can be lined with warp and weft in parallel at the same time, bound together by binding coils, glued online, dried and solidified, cooled cloth storage, fixed-width and framing, and...

Vendredi 12 août 2022

Quantité : 1000

Soxi is one of the top industrial chiller manufacturers in China. Industrial water chiller system plays an important part in the plastic moulding process, injecting frozen water into the flow channel inside the mold, cooling the mold through heat exchange, maintaining the temperature...

Mardi 09 août 2022

Angiographic Guide Wire Details Stainless steel core wire offers excellent torque transmission and kink resistance. Over-the-wire coil offers outstanding deliverability and radiopacity. Ordering Information Catalogue No. Tip Shape Outer Diameter Length (cm) Type MMNSF35150 Straight 0...

Mardi 09 août 2022

Quantité : 10000piece - Prix : 5-500USD/piece

Acrel power sensor is designed for industrial electrical measurement of low voltage system, include rogowski current transducer, hall effect current sensor, current transducer, power transducer and analog signal isolator. High accuracy with CE/IEC standard. Acrel power sensor contributes...

Mardi 09 août 2022

Quantité : 10000piece - Prix : 5-500USD/piece

Under the threat of global energy shortage and the urgency to curb environmental pollution, the demand for energy conservation and emission reduction is increasing day by day, and countries have successively required enterprises to establish need of energy management in microgrids...

Vendredi 05 août 2022

Magnet assembly incorporates magnet alloy and non-magnet material, usually creating much more magnetic strength than using magnets alone, and achieving certain functional effects which magnets cannot perform independently. Various kinds of magnetic assemblies can be designed and customized...

Mardi 02 août 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

Metal Insert Molding Choosing suitable material and molding conditions, not only for products that are easily deformed and damaged (such as glass, coils, electrical parts, etc.), can also be sealed and fixed by material. Choosing a suitable mold structure, the insert product can also...

Mardi 02 août 2022

Quantité : 9000 - Prix : USD10-USD1000000

The nihon spindle drift eliminator is composed of sine wave blades. Its function is to separate the droplets in the air flow. It can not only reduce the drift rate, but also be regarded as an effective dust screen. It can protect the spray system from sunlight and dust pollution....

Mardi 02 août 2022

Quantité : 9000 - Prix : USD10-USD1000000

Closed circuit cooling tower (also known as an evaporative air cooler or closed cooling tower) is the tubular heat exchanger placed in the tower, through the circulation of air, spray water and circulating water heat exchange to ensure the cooling effect. AUVC not only provides...

Samedi 30 juillet 2022

Quantité : 30 sets - Prix : USD10,000-USD100,000

Overview of C & U Channel Roll Forming Machine Like other hollow sections, steel channel is rolled from steel sheet into C or U shapes. It consists of a wide "web" and two "flanges". The flanges could be parallel or tapered. U channel roll forming machine and c channel roll forming...

Vendredi 29 juillet 2022

Quantité : 2000pcs pe - Prix : different products o

Power surge protector, also known as the lightning protector, is suitable for AC 50/60HZ, rated voltage 220V/380V power supply system, to protect indirect lightning and direct lightning effects or other transient overvoltage surges, suitable for households The requirements for surge...

Jeudi 28 juillet 2022

Treated Steel 304L Strips have high sturdiness, and they can undoubtedly endure high-temperature conditions. We keep up with the quality and standard of Coils. It is utilized for various applications in various businesses and, for the most part, utilized in a cool climate. Stainless...

Jeudi 21 juillet 2022

Quantité : 1 - Prix : 19,00 €

Inox Steel largest Aluminium Sheet Manufacturers, supplier, and exporters and Aluminium Plates Manufacturers in India. Inox Steel India is a leading Aluminium Plates Manufacturers in India as well as Aluminium Sheets Manufacturer In India. We are one of India's major Aluminium Sheets...

Mardi 19 juillet 2022

Bhagyalaxmi Industrial is India based company & manufacture and supplies , tubes, pipe fittings, forged fittings, flanges, sheets, plates, coils, bars, rods, fasteners in various materials like stainless steel, duplex and super duplex steel, high nickel alloys, etc visit bhagyalaxmiindustrial...

Vendredi 15 juillet 2022

Aluminum sheet 5083 belongs to Al-Mg series alloy. It is the highest strength corrosion-resistant alloy among practical non-heat-treated alloys. And It is suitable for welding structures. In addition, it is worth mentioning that the 5083 aluminum sheet has good resistance to seawater...

Vendredi 15 juillet 2022

Aluminum Coil for Sale The 5052 aluminum coil is an Al-Mg alloy and also contains a small number of elements such as manganese, chromium, and zinc. With the exception of a small part of the manganese component in the alloy, most of the manganese will form MnAl6, which can improve...

Jeudi 14 juillet 2022

Tape polyester is based on soft polyester film, coated with high-performance silicone pressure-sensitive adhesive or acrylic adhesive on one or both sides. It has excellent high-temperature resistance, high adhesion, no glue residue after tearing off, solvent resistance, high pressure resistance...

Mercredi 13 juillet 2022

Prix : 100USD

The coating of colored aluminum coil is divided into a polyester-coated aluminum coil (PE) and fluorocarbon coated aluminum coil (PVDF). The polyester coating formed by repeatedly baking and coating on the surface of the aluminum plate can form a continuous solid film firmly attached...

Mercredi 13 juillet 2022

Prix : 100USD

It is required to control the solidification process of the zinc layer to obtain relatively uniform and fine zinc flowers, but visible to the naked eye. The minimized spangle galvanized steel can meet the needs. All types of hot dip spun galvanised steel coils are making procedure...

Mercredi 13 juillet 2022

Prix : 100USD

Color painted aluminium coil, as the name suggests, is the surface color coating treatment of aluminum plate or (aluminum roll), common fluorocarbon color coated aluminum (color coated aluminum roll), polyester color coated aluminum (color coated aluminum roll). Painting over painted...

Mercredi 13 juillet 2022

Prix : 100USD

The metallic pattern ppgl is a kind of prepainted galvanized pattern steel coil with the metallic pattern printed on. As one of the responsible painted steel coil suppliers, we give the guarantee for the service life. The promise is that there will be no perforation for 20 years under...

Mercredi 13 juillet 2022

Prix : 100USD

The Matt ppgl steel is one type of the decoractive ppgl. We supplies the best quality and Matt ppgl made from camouflage pattern metal sheet. As the responsible color coated steel coil supplier, we give the guarantee for the service life. The promise is that there will be no perforation...

Mardi 12 juillet 2022

ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals to detect. It is one of the NDT non-destructive testing methods in the industry. The principle of eddy current ndt ultrasonic testing...

Mardi 12 juillet 2022

Prix : 100USD

The GX-SP2012DL-Z Box speaker array 12 inch is a large-scale two-way crossover system providing a bandwidth of 55Hz-20KHz. Our 12 inch line array speakers are fitted with two British top-level 44 mm voice coil HF drivers coupled to a special constant-path aluminum horn and two 12-inch...

Mardi 12 juillet 2022

Prix : 100USD

GX-SP2010DL-Z powered array speakers is a medium-sized two-way crossover system, providing a bandwidth of 55Hz-20KHz. The box speaker array is fitted with two British top-level 34 mm voice coil HF drivers and two 10-inch LF drivers with stronger penetrating power and higher sound pressure level...

Samedi 09 juillet 2022

5005 aluminum coil is Al-Mg series anti-rust aluminum, which is used in various industrial fields. Application of 5005 Aluminium Coil 5005 aluminum coil can be used for interior and exterior materials of building materials, vehicle interior materials, etc. Features of 5005 Aluminium...

Samedi 09 juillet 2022

3105 aluminum coil is a typical deep-drawing material, which is very suitable for roll forming, stamping and manufacturing. Application of 3105 Aluminium Coil 3105 aluminium coil can be widely used in the production of ROPP/ screw/ crown caps for wine, spirits, beverage and soda bottles, etc...

Samedi 09 juillet 2022

3104 aluminum coil (AL-Mn) belongs to modification aluminum alloy, and has good deep-drawing property, which is suitable for thinning the tensile lightweight materials to reduce the quantity of material. Application of 3104 Aluminium Coil 3104 aluminum sheeting roll is suitable for...

Samedi 09 juillet 2022

Aluminum 3005 is an aluminum alloy with manganese as its primary alloying element, supplemented with a magnesium addition which makes it stronger than 3003 alloy. Application of 3005 Aluminium Coil 3005 aluminum coil is often applied for the moist conditions such as air conditioner...

Samedi 09 juillet 2022

The 3d dynamic focusing system mainly consists of XY galvo, dynamic focusing module, control card and upper computer software. By changing the position of the dynamic focusing mirror, its focus is still on the surface of the workpiece, so as to achieve the effect of the same diameter...

Samedi 09 juillet 2022

Han's Scanner focuses on scanning galvanometer system solutions. Our products include Ultragalvo photoelectric scanning galvanometer, Extragalvo grating scanning galvanometer, 3D scanning galvanometer, etc., focusing on galvanometer and motion control system solutions, existing four-axis...

Samedi 02 juillet 2022

Prix : 700-2800USD

443 Stainless Steel Strip 443 stainless steel trim strips is a kind of super ferritic stainless steel with high mechanical properties and corrosion resistance. It is now generally used to replace 304, and its rust resistance and processing performance are equivalent to 304. At present...

Samedi 02 juillet 2022

Fine Blanking Machine As one of fine blanking press manufacturers, we develop BOYA series CNC hydraulic fine blanking machine, which is high-end automation equipment with advanced technology, simple use, precision and independent intellectual property rights. Blanking press machine...

Samedi 02 juillet 2022

Prix : 700-2800USD

441 Stainless Steel Sheet Wuxi SDO stainless steel Co., Ltd has accumulated a good reputation among stainless steel manufacturers in the past years, we have cooperated with some well-known suppliers in the World, such as TISCO, JISCO, LISCO, BAOXIN, BAOSTEEL and so on. And waterproof...

Samedi 02 juillet 2022

Fine Blanking Line Based on BOYA's excellent coil processing and manufacturing capacity and rich series of products, we have a complete set of fine blanking equipment for the production line. Including main machine system, feeding system, uncoiler leveling equipment, blanking line press...

Samedi 02 juillet 2022

BOYA fine blanking production division, the products are good stability and reliability, high degree of automation, high production efficiency, simple operation and ergonomic. For localization of high-end intelligent fine blanking equipment, raise the capacity of fine blanking production...

Samedi 02 juillet 2022

Prix : 700-2800USD

316L Stainless Steel Strip 316 316l stainless steel has a maximum carbon content of 0.03, which can be used in applications that cannot be annealed after welding and require maximum corrosion resistance. 316L stainless steel strips contain 12 to 15% nickel, with an average of 14%...

Samedi 02 juillet 2022

Drum Fly Shear for Cold Rolling Mill Drum flying shears are used at the exit of various continuous cold rolling mills for strips to realize dynamic sub-coiling. During the shearing process, the upper and lower drums of the flying shears make circular motions, and the shear blades...

Samedi 02 juillet 2022

Prix : 700-2800USD

304L Stainless Steel Strip Before 304L stainless steel strip starting up, workers must first check whether the rotating parts of the equipment and electrical parts are safe and reliable. Stacking materials in the work site should be neat, and there should be no obstacles on the passage...

Samedi 02 juillet 2022

CV Joint For Steel and Non-ferrous Metal Industries The main product is ball cage type, designed and developed BJ, BHJ, BJS, BC, DOJ five categories, compared to NTN, the model specification is more complete, for different fields, use conditions, almost all can choose the appropriate coupling...

Samedi 02 juillet 2022

Prix : 700-2800USD

304L Stainless Steel Sheet 304L is a steel grade obtained by reducing the carbon content of 304 to less than 0.03%. Its general characteristics are almost the same as 304, but 304L stainless steel can inhibit the sensitization caused by the precipitation of chromium carbide between 500 and 900oC...

Jeudi 30 juin 2022

Prix : 100USD

Flat carbon steel is a type of steel that is fabricated by the roll or in sheets with a range of dimensions and thickness. Flat steel products consist of plates, sheets, coils, and strips and they can be further categorized into three groups based on their manufacturing process: hot-rolled steel...

Jeudi 30 juin 2022

Prix : 100USD

Finished steel products, also known as steel made products, refer to a series of products further processed from steel, including flanges, pipe fittings, valves, steel wires, steel strands, steel gratings, etc. Taking forged steel flanges as an example, they are further produced from...

Jeudi 30 juin 2022

Prix : 100USD

ERW pipe is the acronym for electric resistance welded steel pipe, and pipe hfw represents high-frequency china welded steel pipe & erw tube china. The are made from steel coil and the weld seam runs parallel to the pipe. And it is one of the most versatile tools in agriculture...

Jeudi 30 juin 2022

Prix : 100USD

OVERVIEW OF COLD ROLLED STEEL COIL Cold rolled carbon steel coil is a type of steel that has been passed through a rolling mill below its recrystallization temperature from 400℃ to 700℃. Recrystallization of steel is a microstructural phenomenon that is achieved by heating on the...

Jeudi 30 juin 2022

Prix : 100USD

In essence, china cold rolled steel sheet can be regarded as hot rolled steel that has undergone further processing. The hot rolled steel is further processed in cold reduction mills, where the hot rolled steel gets cooled down at room temperature, followed by a series of annealing...

Jeudi 30 juin 2022

Quantité : 500000 Pie - Prix : US $1 - 3,000 / Set

ZECO is currently the only manufacturer in China with accurate KV data and support debugging services for balancing valve. We have our own dynamic water testing system, and all the differential pressure control valves and balancing valves used in the heating system and heating system...

Mercredi 22 juin 2022

Quantité : 100000 - Prix : 60~3000USD

Manual Dosing Pump Introduction Of Manual Metering Pump The flow rate of the manual chemical pump is constant and can be manually adjusted. The flow rate is adjusted according to the external analog signal, digital pulse signal (such as pulse signal from water meter) and RS485 communication...

Mercredi 22 juin 2022

Prix : 5000USD-30000USD

What is medical insert molding? Insert molding tooling refers to a molding process in which an integrated product is made by inserting a pre-prepared metal material insert into a mould and then injecting the plastic resin, and the molten material is bonded to the insert, cooled and solidified...

Mardi 21 juin 2022

ERW pipe means electric resistance welded pipe, and it is a resistance welding by 10-500 kHz of high-frequency current. The raw material of the erw welded steel pipe is hot rolled steel coil made of steel billet, and the usual material is Q195, Q215, Q235, Q355 in China ERW pipe grade...

Jeudi 16 juin 2022

Prix : 1000-6000USD

Function of Cut To Length Line It is used for cutting steel coils into certain length sheets. - Technical parameter of decoiling machine cut to length - Production line Components of Cut To Length Line · Coil car · Decoiler · Leading material device · Leveling machine · Storage structure...

Jeudi 16 juin 2022

Prix : 1000-6000USD

The series of our crash barrier making machine possess the following characteristics: Cassette-type machine base for multi-profile purposes: 2-wave barriers, 3-wave barriers, and standing posts for choice. Both underground pit and overground accumulating devices are available for choice...

Jeudi 16 juin 2022

Prix : 1000-6000USD

The C purlin roll forming machine produced by Hangzhou Roll Forming Technology is manufactured with advanced technologies. Not only does this series have a beautiful design, but it is also greatly economical and practical. This c channel forming machine series uses the industrial-grade...

Jeudi 16 juin 2022

Prix : 1000-6000USD

The coil upender is used for 90-degree rollover of steel coil. The steel coil upender consists of a base, turntable, roller shaft group system, transmission shaft group, transmission system, and electric control system.Hangzhou Roll Forming Co., Ltd. is a coil upender manufacturer...

Jeudi 16 juin 2022

Prix : 1000-6000USD

Equipment Summary of Coil Embossing Machine As a professional embossing machine supplier, we provide tube mill line, roll forming machine, china square tube making machine, electric embossing machine for sale, embossing rolling mill, metal embossing machine for sale, cold rolling...

Jeudi 16 juin 2022

Prix : 1000-6000USD

Introduction of coil transfer cart The coil transfer trolley allows for quick coil change, but the most important feature is eliminating coil damage due to “coning” of the coil during forklift loading and unloading. No need to block up the cart with wood, like other decoilers. This...

Jeudi 16 juin 2022

HC-C650/1300/1600B Surface Slitting Machine This machine is suitable for the slitting of metallic material: aluminum foil, copper foil, PET CCL, BOPP, PET, CPP, PE, PVC, film, paper, etc. Features of HC-C650/1300/1600B Surface Coil Slitting Machine Use This machine is suitable for...

Jeudi 16 juin 2022

HC-650 auto slitting machine Ultrasonic rectification---automatic detection and rectification---high accurate magnetic powder clutch---the unwinding and rewinding tension can be controlled---response sensitively---low noise. Features of HC-650 Automatic Coil Slitter Rewinder Machine...

Jeudi 16 juin 2022

HC-650 Automatic coil slitting machine Ultrasonic rectification---automatic detection and rectification---high accurate magnetic powder clutch---the unwinding and rewinding tension can be controlled---response sensitively---low noise. Features of HC-650 Automatic Coil Slitter Rewinder...

Mardi 14 juin 2022

Quantité : 150000 ton - Prix : USD 2500/T to USD 35

Description of Hot Rolled Steel Coil Hot rolling is a mill process that involves rolling the steel at a high temperature (typically at a temperature over 1700° F), which is above the steel's recrystallization temperature. When steel is above the recrystallization temperature, it can...

Mardi 14 juin 2022

Quantité : 150000 ton - Prix : USD 2500/T to USD 35

Definition of HBI Hot Briquetted Iron, known as HBI or hbi iron ore, is a premium form of Direct Reduced Iron (DRI).As a supplement for pig iron and scrap in electric furnace steel mills. It is a compacted form of direct reduced iron (DRI), which facilitates its handling, storage, and use...

Mardi 14 juin 2022

Quantité : 150000 ton - Prix : USD 2500/T to USD 35

Definition of raw materials graphite electrode Graphite electrode is high temperature resistant graphite conductive material. It is made of petroleum coke and pitch coke as aggregate and coal tar pitch as binder. The production process for graphite electrode for steel making includes Calcining...

Mardi 14 juin 2022

Quantité : 150000 ton - Prix : USD 2500/T to USD 35

Description of Galvanized Rolled Steel Hot dipped galvanized steel sheet is a carbon steel sheet coated with zinc on both sides through a continuous hot-dip process. When the heated steel strip is in contact with the molten zinc, the coating is firmly adhered to the steel by the iron-zinc...

Mardi 14 juin 2022

Quantité : 150000 ton - Prix : USD 2500/T to USD 35

Description of Galvanized Steel Coils hot rolled galvanized steel coil are produced by passing the acid-washed and calendered full hard plate through the zinc tank, thereby galvanizing the film on the surface. Galvanized steel coil with good raw materials and 7 times the cold rolling machine...

Mardi 14 juin 2022

Transformer is a device that uses the principle of electromagnetic induction to change the AC voltage. The main components are the primary coil, the secondary coil and the iron core (magnetic core). The main functions are: voltage transformation, current transformation, impedance transformation...

Mardi 14 juin 2022

Prix : 1000-6000USD

Product Description Leveling Equipment And Beading Machine Performance Feature: Leveling and beading machine is an upgraded machine of line 5 beading machine. The machine adds leveling function before grooving based on sheet metal beading machine. So that the finished sheet metal...

Vendredi 10 juin 2022

STEEL SILO ROLL FORMING MACHINE BOSJ develops and produces auxiliary equipment such as metal granary, steel silo, water tank line and supporting ladder, upper and lower vertebra, upper and lower adapter, protection ring, etc., with invention patent. At the same time, the company is...

Jeudi 09 juin 2022

Horizontal Crystallizer HVD-HCR-V horizontal agitated batch vacuum crystallizer is a piece of cooling crystallisation equipment. The source medium of crystallization is operated under atmospheric pressure. The crystallization temperature is determined by the process and the crystallization...

Mardi 07 juin 2022

Quantité : 15000sets - Prix : 100USD-5000USD

Wireless transmitter microphone Hollyland's wireless lav audio recording solutions ensure reliable transmission performance that delivers a hands-free smooth audio recording experience. Designed for Tik-Tokers, YouTubers and Vloggers looking for a professional audio recording for...

Vendredi 03 juin 2022

Accurate Metals & Alloys LLP are one of the leading Supplier, Distributor, Exporter & Stockist of Stainless Steel, Duplex Steel and Super Duplex Steel Sheets, Plates and Coils. We also supply and stock Jindal Quality Sheets, Plates, and Coils in various materials and types...

Mardi 31 mai 2022

Pacific Metal Trading Co supply a wide variety of industrial products like Sheets, Plates coils, , tubes buttweld fittings, socketweld fittings in various ferrous and non-ferrous material, visit website pacificmetalindia.com for products and other details Localisation : PRASAD CHAMBERS...

Samedi 21 mai 2022

FCU actuator valve belongs to the central air-conditioning terminal control products. As an executive component that controls the water flow in the fan-coil, FCU motorized valve is controlled by the central air-conditioning thermostat (or three-speed switch). The central air conditioner...

Vendredi 20 mai 2022

What Is Anti Metal RFID Tag The working frequency of high quality rfid sticker label is 13.56mhz. The RFID antenna of this frequency can be made by several methods: copper coil winding, aluminum foil etching, conductive silver paste printing.13.56 mhz rfid tag design is mainly composed...

Mercredi 18 mai 2022

Quantité : Data cable - Prix : $0.5~$7

Buy new lightning cable with 20w PD fast charger power wholesale that supports iPhone 12 With the cable USB type C to lightning, you can charge 50% in 30mins Dual magnetic coiled lightning cable offers stronger adsorption for the lightning to USB C cable and USB type C mobiles Easy...

Mardi 17 mai 2022

Based on BOYA's excellent processing and manufacturing capacity and rich series of products, we have a complete set of fine blanking equipment for the production line. Including main machine system, feeding system, uncoiler leveling equipment, blanking line press, parts conveying sorting device...

Mardi 17 mai 2022

The color coater provided by BOYA adopts modular design and is highly intelligent. The coil coating equipment is easy to operate and has high accuracy. Types Of Coil Coaters As a trustworthy and professional manufacturer of coil coaters, also called coil coating machines, Boya offers...

Samedi 14 mai 2022

Glass cloth electrical tape is made of high-quality high-density alkali-free glass cloth, coated with imported silicone pressure-sensitive adhesive on one side or both sides. The thickness of the single-sided glass cloth adhesive tape is 0.18 mm, and the thickness of the heat resistant...

Samedi 14 mai 2022

Double sided high temperature tape is made of high-quality, high-density alkali-free glass cloth, coated with imported silicone pressure-sensitive adhesive on both sides, and processed at high temperature. Double sided heat resistant fiberglass cloth tape has the characteristics of...

Mercredi 11 mai 2022

China 3003 aluminum sheet is a typical Al-Mn antirust alloy. The addition of the alloy component Mn increases the strength slightly while maintaining the excellent workability and corrosion resistance of pure aluminum. The 3003 aluminum sheet is a non-heat-treated alloy and cannot...

Mercredi 11 mai 2022

Aluminum coil 3003 is a commonly used Al-Mn antirust alloy. Similarly, the 3003 aluminum coil is also a non-heat-treated alloy, and its mechanical properties can be improved by conventional cold processing. In addition, because 3003 aluminum coil has good corrosion resistance, plus...

Mercredi 11 mai 2022

100+ Various materials are available. Support parts assembly service. As part of our machining and fabrication services, Xin Pin offers part and assembly prototyping. How will a final product look? Will it work properly? How can it best be explained to a client? Xin Pin will help...

Mercredi 11 mai 2022

Insert molding is a molding method to make integrated products. Ⅰ. Definition of insert molding Plastic insert molding means that after inserting a pre-prepared dissimilar material into the mold, injecting resin and molten material, and finally joining with the insert to solidify...

Mercredi 11 mai 2022

Prix : 10-30USD

Diode Thermistor Specification/model format: MTG1 Details Material: semiconductor ceramic resistor chip /glass Applicable temperature range：-45~250℃ Output signal: analog signal output Advantages 1. The product is a radial lead double-ended glass package thermistor 2. Good stability...

Mardi 10 mai 2022

Quantité : 100,000 - Prix : 1~100 USD

Grease spray gun A grease spray gun is a tool used for lubrication. It is used to apply lubricant through an aperture to a specific point. There are several common grease spray gun types such as guns made using a lever, hand pump, pistol grip, and an air-powered or battery charged design...

Mardi 10 mai 2022

Stainless steel strip is simply and extension of the ultra-thin stainless steel plate. It mainly a narrow and long plat strip stainless produce to meet the needs of different industrial sectors for the industrial production of various types of metal or mechanical products. 316Ti Stainless...

Mardi 10 mai 2022

The GX-SP2012DL-Z line array 12 is a large-scale two-way crossover system providing a bandwidth of 55Hz-20KHz. Our 12-inch line array speakers are fitted with two British top-level 44 mm voice coil HF drivers coupled to a special constant-path aluminum horn and two 12-inch LF drivers...

Samedi 30 avril 2022

Quantité : 5000 sets - Prix : USD5,000.00-USD3,000

This sheet metal slitting line machine is special equipment for uncoiling, slitting and recoiling the steel sheet according to the requirement of the client. Our machine adopts international famous brands for core components, such as SIMENS, DANFOSS, OMRON, REXROTH, SEW, etc. And...

Samedi 30 avril 2022

Quantité : 5000 sets - Prix : USD5,000.00-USD3,000

Our uncoiler machine is suitable for the uncoiling and conveying of thin metal sheets. It is the auxiliary equipment for roll forming machines. The uncoiler for sale primarily consists of the main machine, tension device, arm hold down device, ultrasonic control device, electric control...

Samedi 30 avril 2022

Quantité : 5000 sets - Prix : USD5,000.00-USD3,000

Sandwich panel equipment are widely applied in the protection and decoration of outside wall for tall building and first-class office building. Sandwich panel production machinery can protect, keep warm and flame retarding. The sandwich panel production line in Jinggong can mainly...

Samedi 30 avril 2022

Quantité : 5000 sets - Prix : USD5,000.00-USD3,000

Having made automatic china roll former for over twenty years, we are a professional china roll forming machine factory in this area with rich experience. The main forming part can be a double layer or single layer, it has the collection of rollforming machinery, electricity and hydraulic...

Samedi 30 avril 2022

Quantité : 5000 sets - Prix : USD5,000.00-USD3,000

The C Z purlin machine china, also called C Z purlin roll former / C Z china purlin roll forming machine. This type of c&z purlin forming machine can change the profile and specifications automatically without replacing the rollers if want to do different purlines with different...

Samedi 30 avril 2022

Quantité : 5000 sets - Prix : USD5,000.00-USD3,000

This series of high-speed tile roll forming machine is a new-generational type roof tile roll forming machine with high speed and high-efficient, including decoiler system, sheet guiding system, roll forming system, pressing system, cutting system, auto-stacker system, hydraulic system...

Samedi 30 avril 2022

Quantité : 5000 sets - Prix : USD5,000.00-USD3,000

Guardrail Forming Machine is the special forming equipment for producing the speedway guide rail. One shift every month can produce 600 tons (max). The common thickness for the coil is normally 3-4mm for low yield strength. The rough weight of total highway guardrail roll forming...

Samedi 30 avril 2022

Quantité : 5000 sets - Prix : USD5,000.00-USD3,000

Main structure features of EPS Sandwich Panel Machine 1) This EPS sandwich panel making machine has the specification: nice appearance, low noise and high efficiency. 2) The EPS sandwich panel production line is welded by H-beam with shot blasting treatment on the surface, so the...

Samedi 30 avril 2022

Quantité : 5000 sets - Prix : USD5,000.00-USD3,000

This downspout pipe roll forming machine can produce the sealed color water by forming the colored steel sheet and whipstitch it. The downspout forming machine adopts a PLC control system, AC frequency conversion speed-adjust technology, therefore it can automatically cut to length...

Samedi 30 avril 2022

Quantité : 5000 sets - Prix : USD5,000.00-USD3,000

This china cut to length machine is special equipment for uncoiling, leveling, cutting and stacking the steel sheet according to the requirement of the client. It mainly consists of uncoiler, leveling system, feeding system, cutting system, conveying system, stacking system and so on...

Samedi 30 avril 2022

Quantité : 5000 sets - Prix : USD5,000.00-USD3,000

The corrugated web beam automatic welding machine adopts the welding robot originally from Italy which automatically controls the works such as the whole Line laser scanning, two positions welding, welding gun changing, crosssection cutting and so on. This machine has the features...

Lundi 25 avril 2022

The step up transformer connection is the instantaneous start of the voltage transformer, and the set up transformer can start up with a high pressure well. The difference is that the non-excitation regulating switch does not have the ability to carry the load shift gear, because...

Lundi 25 avril 2022

Step Up Transformer Application A transformer is a passive device, which does not provide energy, and its load capacity depends mainly on the driving power of the primary drive circuit. If the output resistance of the driving circuit is low and the output current is larger, the...

Lundi 25 avril 2022

Step Down Transformer Efficiency The step down transformer winding is the internal circuit of the equipment, which is directly connected with the external power grid, and it is the most important part of the transformer. The winding is often called the "heart" of a transformer....

Lundi 25 avril 2022

Stabilizer Transformer Winding The stabilizer transformer is an AC regulator made of the magnetic separation structure based on the principle of ferromagnetic resonance. Generally, it is believed that the stabilizer transformer is evolved from the electromagnetic voltage regulator...

Jeudi 21 avril 2022

Embolic Coil. Neurovascular medical device. Applied for endovascular embolization. Perdenser® Embolic Coil System Details Perdenser® Embolic Coil System provides different softness with better compliance. Anti-unwinding structure prevents coil from unwinding which is caused by over-stretching...

Jeudi 21 avril 2022

Latest Release Perdenser® and Frepass® in the Treatment of Posterior Communicating Artery Ruptured Aneurysms Mar 29, 2022 Perdenser® and Frepass® in the Treatment of Posterior Communicating Artery Ruptured Aneurysms Mar 23, 2022 Perdenser® and Perfiller® Coil System for Embolism in...

Jeudi 21 avril 2022

Transformer is a device that uses the principle of electromagnetic induction to change the AC voltage. The main components are the primary coil, the secondary coil and the iron core (magnetic core). The main functions are: voltage transformation, current transformation, impedance...

Jeudi 21 avril 2022

Quantité : 1 million - Prix : USD400-USD2000

Powder coated carbon steel is a type of steel that was applied with an additional layer of organic or metallic materials on its surface to protect from rusting and reduce wear/tear. Usually, the coating layer is applied to flat steel when it is in a coil form. By coating the steel...

Jeudi 21 avril 2022

Quantité : 1 million - Prix : USD400-USD2000

As the leading high carbon steel supplier in China, CUMIC Steel's supply capacity covers almost all major categories of carbon steel products with the required quality standards of the industry. Our types of carbon steel pipe material & products include flat carbon steel, long carbon steel...

Mercredi 20 avril 2022

Quantité : more than - Prix : 3000-6500 euro per M

Description of Cold Rolled Steel Strip Strip steel has more stringent thickness tolerances than cold-rolled steel. Before rolling, cold rolled strip is pickled to remove surface impurities and ensure a clean, even finish. The strip does not shrink or creep at ambient temperature....

Mercredi 20 avril 2022

Quantité : more than - Prix : 3000-6500 euro per M

Description of Cold Rolled Coil Cold rolled coil, as known as CR coil, CRS or CRC. Cold rolled steel coils are a farther product that uses hot rolled steel coils to do further processing. The further processed steel coil put in a cold rolling mill where the material is cooled (at...)

Mercredi 20 avril 2022

Quantité : more than - Prix : 3000-6500 euro per M

Anode Carbon Block Overview It participates in electrochemical reactions and directs current into the electrolytic cell. Each prebaked carbon anode block is preassembled by 1 ~ 3 anode carbon blocks, anode guide rod and steel claw (see anode carbon block assembly). The single anode...

Vendredi 15 avril 2022

Quantité : 5000 ton/p - Prix : ＞0.8USD

Coiled Tubing Description Huashang seamless coiled tubing we produce can reach more than 1000 meters, compared with other coiled tubing manufacturers, which particularly reduces the tubing unions and connection for the duration of the installation, making the set up extra convenient...

Jeudi 14 avril 2022

Well designed by engineers at Hangzhou Roll Forming Technology, this series of cable punching machines can produce cable trays and caps from 50-350mm. It can conduct fast and easy operations between different sizes. Adopting cantilever shafts forming structure, the forming tooling...

Jeudi 14 avril 2022

The Auxiliary equipment refers to machines for metal sheets before being formed and profiles after formed. The equipment for metal sheets including Decoilers, Steel coil slitting equipment, Cutting to length equipment, embossing line, and so on. According to roll forming equipment requirements...

Jeudi 14 avril 2022

Roof Seamers for Sale This automatic round seamer machine series is assistant equipment for the roof roll former seamer. Seaming the roof panels, our electric roof seamer is featured with lightweight, small size, easy operation, and maintenance, especially considering the narrow...

Jeudi 14 avril 2022

This ag panel roll forming machine series is used to make high-quality AG panels. As a professional roof and wall panel roll forming machine manufacturer, Hangzhou Roll Forming Technology Co., Ltd. provides high-quality used ag panel roll former for sale for sale at reasonable prices...

Jeudi 14 avril 2022

COLD ROLL FORMING MACHINE Cold pipe forming equipment is to form cold plate or strip into a variety of state sectional shape of the finished steel by passing a strip metal from consecutive rolls. Roof And Wall Panel Roll Forming Machine China TUBE MILL & PIPE MILL Tube Mill/Pipe...

Jeudi 14 avril 2022

1100 aluminium tube coil is usually used for products that require good forming performance and high corrosion resistance. Its strength is relatively low, and it has excellent ductility, formability, weldability and corrosion resistance. After anodizing, the corrosion resistance can...

Mercredi 13 avril 2022

Prix : 1000-50000USD

It's mainly for uncoiling, leveling, beading, punching, locking, bilaterally angle steel or TDF flange forming. Because of its small space requirement and easy to install and operate, people also call it "small line 5". Auto Duct Production Line 4 Performance Features: The function...

Mercredi 13 avril 2022

Prix : 1000-50000USD

Duct production line 3 can drive blanking for duct. Meantime, it's very suitable for diversified production like TDF/angle steel/inserted flange forming; the angle steel flange and inserted flange can be bent into square-shaped pipe automatically. Performance features of Auto Duct...

Mercredi 13 avril 2022

Prix : 1000-50000USD

Air Duct Machine for Sale Duct production line 2 can drive blanking for duct and TDF flange forming machine at the same time.Combined with TDF flange forming machine, rolling reel machine, crimping machine and relevant comer code, duct production line 2 can produce high-quality products...

Mercredi 13 avril 2022

Prix : 1000-50000USD

Description of auto line duct machine Cnc air duct line is a duct making line with the highest automation and highest efficiency in rectangular air duct production line machines. The air duct production line machine made by BLKMA company can help customers to finish all needed...

Mardi 12 avril 2022

Our uncoiler machine is suitable for the uncoiling and conveying of thin metal sheets. It is the auxiliary equipment for roll forming machines. The uncoiler for sale primarily consists of the main machine, tension device, arm hold down device, ultrasonic control device, electric control...

Mardi 12 avril 2022

Sandwich panel machine line are widely applied in the protection and decoration of outside wall for tall building and first-class office building. Sandwich panel equipment can protect, keep warm and flame retarding. The sandwich panel production line in Jinggong can mainly produce...

Mardi 12 avril 2022

Having made automatic roll forming machine for over twenty years, we are a professional china roll forming machine factory and supplier in this area with rich experience. The main forming part can be a double layer or single layer, it has the collection of rollforming machinery, electricity...

Mardi 12 avril 2022

The rockwool sandwich panel production line is one continuous and automatic line that integrates mechanism, electrical controlling, hydraulic system and polyurethane chemical reaction technology. The rock wool sandwich panel machineadopts advanced international roll forming technology...

Mardi 12 avril 2022

The c purlin machine china, also called C Z purlin roll former / C Z purlin machine china. This type of C Z roll forming machine can change the profile and specifications automatically without replacing the rollers if want to do different purlines with different specifications, and...

Mardi 12 avril 2022

This series of high-speed tile roll forming machine is a new-generational type roof tile forming machine with high speed and high-efficient, including decoiler system, sheet guiding system, roll forming system, pressing system, cutting system, auto-stacker system, hydraulic system...

Mardi 12 avril 2022

Guardrail Roll Forming Machine is the special forming equipment for producing the speedway guide rail. One shift every month can produce 600 tons (max). The common thickness for the coil is normally 3-4mm for low yield strength. The rough weight of total highway guardrail roll forming...

Mardi 12 avril 2022

Main structure features of EPS Panel Machine 1) This EPS sandwich panel making machine has the specification: nice appearance, low noise and high efficiency. 2) The EPS sandwich panel production line is welded by H-beam with shot blasting treatment on the surface, so the whole structure...

Mardi 12 avril 2022

This downspout roll forming machine can produce the sealed color water by forming the colored steel sheet and whipstitch it. The downspout forming machine adopts a PLC control system, AC frequency conversion speed-adjust technology, therefore it can automatically cut to length. This...

Mardi 12 avril 2022

This china cut to length machine is special equipment for uncoiling, leveling, cutting and stacking the steel sheet according to the requirement of the client. It mainly consists of uncoiler, leveling system, feeding system, cutting system, conveying system, stacking system and so on...

Mardi 12 avril 2022

The corrugated web beam automatic welding machine adopts the welding robot originally from Italy which automatically controls the works such as the whole Line laser scanning, two positions welding, welding gun changing, crosssection cutting and so on. This machine has the features...

Vendredi 08 avril 2022

The traditional Z-axis focusing module adopts voice coil motor or galvanometer structure, which has high load quality, slow response time and low dynamic performance. VCM Z-axis focusing module breaks through the traditional perspective optical path design scheme and greatly improves...

Vendredi 08 avril 2022

VCM G2 adopts full digital galvanometer driver, digital driver board of basic FPGA, stable performance, not easy to be disturbed, flexible to use, easy to debug. Modular design, easy to assemble. According to customer requirements, we can choose lenses with different aperture, high...

Jeudi 07 avril 2022

Closed circuit counter flow cooler (also known as an evaporative air cooler or closed cooling tower) is the tubular heat exchanger placed in the tower, through the circulation of air, spray water and circulating water heat exchange to ensure the cooling effect. AUVC not only provides...