MELTING - 3448 Annonces

Friday 25 November 2022

Aluminum battery tray lower box of battery pack is mainly made of steel and aluminium alloy. Aluminium alloy is favored by more and more automobile OEMs and battery tray manufacturers around the world because of low destiny of battery tray bracket and various forming processes, which...

Thursday 17 November 2022

Quantité : 20000Ton - Prix : USD0.6~USD2

Melt blown filter cloth is a kind of non-woven fabric products, with polypropylene (PP material) granules as the raw material. The general production process of filter fabric meltblown cloth is polymer feeding, melting extrusion, fiber formation, fiber cooling, net formation, and...

Thursday 17 November 2022

Quantité : 20000Ton - Prix : USD0.6~USD2

Industrial Needle Punched PET Spunbond Non-Woven Fabric Industrial PET spunbond non woven fabric has excellent physical and mechanical properties in a wide temperature range. The long-term use temperature can reach 120°C. The electrical insulation of the polyester spunbond nonwoven...

Wednesday 16 November 2022

Butyl acrylate ba is a kind of colorless transparent liquid, insoluble in water, can be mixed in ethanol and ether. HS code butyl acrylate is 2916123000. Acrylates and their esters have been widely used in industry. They are used to make soft monomers of acrylate solvent and emulsion adhesives...

Saturday 12 November 2022

Graphite powder is a non-metallic mineral material. Graphite powder has high conductivity and thermal conductivity, high melting point, good lubricity, plasticity and chemical stability. Graphite powder can be corroded by acid, alkali and organic solvents. Therefore, it is widely...

Saturday 12 November 2022

High purity graphite is a kind of high-quality graphite carbon material. When it is made, an organic compound with strong acid resistance is added. After a series of processes such as high-pressure forming and high-temperature heat treatment, it can effectively reduce the porosity...

Saturday 12 November 2022

1. Our professional R&D and QC team can strictly control the product quality to meet your requirement. 2. We have a professional sales team to provide you with quick and warm service throughout the whole process. 3. Easy to install. 4 Strict quality management system. 5. Professional...

Saturday 12 November 2022

FMY Series automatic thermal lamination machine adopts the environmental protection laminating process and operates simple, less investment, easy to use, whether it is mass production or a small amount of film, can be used easily, and now widely used in the market. 1. Adopt a high-speed...

Friday 11 November 2022

420J2 stainless steel strip belongs to the Japanese standard martensitic stainless steel, the implementation standard: JIS G4303-2005. 420J2 This steel has good mechanical processing performance. After heat treatment (quenching and tempering), it has excellent corrosion resistance...

Friday 11 November 2022

420j2 stainless steel, also called 3Cr13 steel, is martensitic stainless steel, used after quenching and tempering. Compared with 1Cr13 and 2Cr13 steel, 420J2 stainless steel has higher strength, hardness and hardenability, but its corrosion resistance and thermal stability below...

Friday 11 November 2022

The new grade of 316TI stainless steel sheet is 06Cr17Ni12Mo2Ti. 316TI is to add Ti to SUS316 steel to improve the resistance to intergranular corrosion. 316Ti corrosion-resistant stainless steel sheet is widely used in chemical, food, medicine, paper, petroleum, atomic energy and...

Tuesday 08 November 2022

Prix : 100USD

Custom Compound Die Stamping Service China A single die is generally composed of one or more concave dies and a convex dies, which refers to completing the process in a stamping stroke only in one station. OEM Compound Die Design Stamping Factory A single die can be divided into punching die...

Wednesday 02 November 2022

Barium fluoride (BaF2 lens) crystal belongs to cubic crystal system with outstanding moisture resistance, melting point of 1280℃, which allows BaF2 components work under extreme high temperature, refractive index varies slightly in a broad wavelength range, wide transmission range...

Tuesday 01 November 2022

ZNC EDM Sinker has X and Y-axis manual control, and Z-axis automatic control. It can do one single job after manually set position, and job setting is also manual. Ideal for molds and spare parts manufacturing industries, ZNC die sinking EDM machine for sale by DMNC is your best choice...

Tuesday 01 November 2022

Quantité : 1000 sets/ - Prix : USD 500~50000

Aviation and aerospace are manifestations of high standard industrial capabilities. Induction heating is widely used in the aerospace industry, and many tasks such as mechanical parts connection, fast brazing, and welding require this technology for aviation safety. In the aerospace industry...

Tuesday 01 November 2022

Quantité : 1000 sets/ - Prix : USD 500~50000

To realize the better performance of SWS-25A, JKZ has designed a fully digital control induction heating generator at the frequency range of 15~30KHz. It is designed with a maximum single machine power of 250KW and can be integrated with a state monitoring system. After a long time...

Tuesday 01 November 2022

Quantité : 1000 sets/ - Prix : USD 500~50000

The frequency range of the MFS-500A 500KW IGBT type medium frequency generator is from 1KHZ to 10KHZ. Designed based on customers' actual billets size dimensions, MFS-500A adopts the standard voltage 3 phase 380V/50HZ; whereas, the equipment can also be customized according to customers'...

Wednesday 19 October 2022

Product Name: Hexamethylcyclotrisiloxane Molecular Formula: [(CH3 ) 2 SiO]3 Molecular Weight: 222.47 CAS No.: 541-05-9 UN No.: 1325 Physical and Chemical Properties: Melting Point: 64℃ Boiling Point: 134℃ Relative Density (water=1): 1.12 Appearance: White crystalline lens. Technical...

Wednesday 19 October 2022

EVA hot melt adhesive is a solid polymer that is solvent-free, no moisture at room temperature it is solid, heating to a certain temperature, into the flow and a certain viscosity of the liquid binder. After melting, eva based hot melt adhesive is transparent or translucent yellowish or white...

Wednesday 19 October 2022

PEEK Teeth R&D Series has good wear resistance and high mechanical strength. It is mainly used in dentistry in medical field. Specification of Peek Dental Prosthesis R&D Series Material Properties Test Method Conditions Units 770G Mechanical Data Tensile Strength ISO 527 B reak...

Wednesday 19 October 2022

PEEK-GL series, is a glass fiber composite modified peek plastic materials, currently available from 5% -35% of different mass fractions of reinforced materials. Compared with pure resin particles, it has better rigidity, better creep resistance and dimensional stability. Types...

Tuesday 18 October 2022

ASTM B338 and ASME SB338 cover 28 grades of titanium and titanium alloy tubes for surface condensers, evaporators, and heat exchangers together with grades Gr2. ASTM B338 GR2 TITANIUM TUBE MECHANICAL PROPERTIES Element Density Melting Point Tensile Strength Yield Strength (0...)

Saturday 15 October 2022

Paraffin wax emulsion is a multi-phase emulsion in which materials such as natural wax and synthetic wax are dispersed in water under the action of an emulsifier. The production method is mainly a phase inversion emulsification method. We, being one of wax emulsion suppliers, can...

Saturday 15 October 2022

With a high transparency and gloss level, Paraffin Wax Emulsion PWE 60S is an excellent choice of coating for general applications. It gives your coatings a good abrasion resistance as well. Features of Paraffin Emulsion PWE 60S High transparency and gloss Good abrasion resistance...

Saturday 15 October 2022

Paraffin wax emulsion formulation PWE 50SA is a high transparency, high gloss emulsified paraffin wax. It is recommended for use in applications which require good abrasion resistance and a high degree of hardness. Features of Polyethylene Wax Emulsion Formulation PWE 50SA High transparency...

Saturday 15 October 2022

Microcrystalline wax is obtained from petroleum distillation residual heavy fractions by solvent separation, refining and hydrogenation. It is a combination of branched and straight chain saturated hydrocarbons with carbon numbers greater than 35. Unlike paraffin waxes, microcrystalline...

Saturday 15 October 2022

Microcrystalline wax is obtained from petroleum distillation residual heavy fractions by solvent separation, refining and hydrogenation. It is a combination of branched and straight chain saturated hydrocarbons with carbon numbers greater than 35. Unlike paraffin waxes, microcrystalline...

Saturday 15 October 2022

KH Paraffin Petroleum Based Wax F66N/L/H has the fine crystal structure, and relatively has the good compatibility with the most of polymers. In adhesives applications, it is added in the EVA system, its crystal property adjust the viscosity of the adhesives system, lift up the setting time...

Wednesday 28 September 2022

Quantité : 100000TON - Prix : 2300USD/TON-3000USD/

3003 aluminum foil is an AL-Mn series alloy. It is a rust-proof aluminum foil with a wide range of applications, but it is not strong enough and cannot be strengthened by heat treatment. Therefore, the cold working method is adopted to improve its mechanical properties. It is necessary...

Wednesday 21 September 2022

Prix : 5000-50000USD

Advantages of Plaswelding Butt Welding Machine With its own plastic welding machine factory, Plaswelding is a professional plastic pipe welding machine manufacturers and butt welding machine suppliers in China that has various reliable plastic pipe welding machine for sale, including...