DIAMETER - 10950 Annonces

Saturday 29 October 2022

Prix : 100USD

What is Particle Size and Particle Size Distribution? Particle size indicates how small (or big) a particle is. The unit is usually mm, μm or nm. The particle diameter is the most common parameter usually used to describe particle size. Particle size distribution is characterized...

Saturday 29 October 2022

As a superabrasive ltd, E-Grind produces high-quality Polycrystalline diamond composite(PDC) and polycrystalline diamond compact cutters . Polycrystalline diamond composite(PDC) sheet is made of diamond particles and cemented carbide matrix sintered at 60,000 atmospheres, high temperature...

Saturday 29 October 2022

- Grind supplies the whole range of and PCDN blanks for cutting tool purpose. The largest Diameter of PCD blanks and PCDN blanks available can be 55mm. Our PCD blanks and PCDN blanks provide high wearing resistance ability and high finishing surface. Application of PCD Blanks Our...

Saturday 29 October 2022

Quantité : 500000 Pie - Prix : US $1 - 3,000 / Set

Features of single orifice air release valve Can be a large amount of exhaust, improve water efficiency pump Can be a small amount of exhaust, make sure the pipe is full of water; Interface with filter screen, filter impurities, long life; Float ball is made of SS304, resistant to corrosion...

Saturday 29 October 2022

Quantité : 500000 Pie - Prix : US $1 - 3,000 / Set

Features of resilient seal gate valve Full diameter flat - bottom runner, no debris pooling; Fully covered EPDM disc, no corrosion; Movable disc's nut, adaptive offset; The variable pressure change O-Ring. Resilient Seated Gate Valve Working Principle The main seal is entirely rubber...

Saturday 29 October 2022

Quantité : 2 million - Prix : 0.1-6

Fixed Stainless Steel Bollard Fixed Bollard Stainless Steel Bollard can be embedded in concrete for simple and secure installations. Its clean and versatile design is highly visible and available with alternative mountings (see retractable and removable models) for consistent aesthetics...

Thursday 27 October 2022

Prix : 1-100USD

A fiber coupled collimator is a fiber optic passive device which is a precise alignment of a pigtail and a lens. It can transform diverging light into parallel beam of light or couple the collimating light into a single fiber. It is widely applied in single mode fiber collimator...

Thursday 27 October 2022

Cam yoke roller, also called ball bearing track roller. They are non-separable,single-row or double-row ball bearings with thick outer rings. In addition to withstanding very high radial loads, these bearings can also withstand axial forces in both directions. Cam roller can support...

Thursday 27 October 2022

Cam followers, also called stud type track rollers, are special roller bearings that are mainly used to follow tracks or cams and are used in a wide range of applications in linear motion systems. We often see cam followers in conveyors and industrial transmission lines, such as...

Wednesday 26 October 2022

Laundry always become a problem if you do not own a china portable washing machine for yourself. Laundromat can not guarantee the safety of your clothes and public washer always seems to far from your apartment. Well, now this little comes and do all the magic for you! It's space-efficient...

Wednesday 26 October 2022

The lens holder, mainly made of metal, is used for the combination and fixation of lens and camera. In our company, various kinds of camera lens holder are provided, such as M12, M7, M8, CCTV Lens Holder, IR cut filter switch and so on. Our products are suitable for most models of...

Saturday 22 October 2022

The high-precision electronic digital height gauge for sale is designed to measure dimensions for many industrial applications and testing institutions. This digital hight gauge tool can perform high-precision measurement of height, depth, and thickness, including special-shaped...

Saturday 22 October 2022

Types of small tube cleaning brushes Tube brush is a very efficient, convenient and cost-effective tool, which is widely used in food, manufacturing and other industries. Tube brush can be easily installed on pneumatic tools, machine tools, bench drills, or can be used directly by hand...

Saturday 22 October 2022

It is widely used in metal surface treatment. Can easily remove the burrs from gears, grooves, etc. It can be installed on electric drill, machine tool and other equipment. According to the specific requirements, choose different sizes, wire diameter of the drill bit steel brush...

Saturday 22 October 2022

The steel wire disc brush has strong grinding ability and is mostly used for the workpiece with low surface roughness requirements. Nylon sanding brush can effectively remove burr, welding slag, rust and so on in a very short time. For example, the large solid welding slag produced...

Saturday 22 October 2022

Silicon Carbide Disc Brush The Silicon Carbide Brush is specially used to deal with the surface of the metal, such as cast iron, aluminum, steel. Metal parts produced by cutting or die casting will inevitably have burr or flanging. If the burrs are not removed, it will lead to the...

Friday 21 October 2022

Prix : 10-30USD

Number of layers: 4 Surface finish: ENIG Base material: High TG FR4 Outer Layer W/S: 4/3.5mil Inner layer W/S: 4/3.5mil Thickness: 1.0mm Min. hole diameter: 0.25mm Special process: Impedance Control Advantages Of 4 Layer High TG Impedance Control Fine Pitch PCB Own lamination process...

Friday 21 October 2022

Prix : 10-30USD

Number of layers: rogers fr4 size：80*88mm Surface finish: ENIG Base material: FR4+Rogers 4350B Min. hole diameter: 0.3mm Minimum Line Width：0.230mm Minimum Line Space：0.170mm Thickness: 1.0mm Advantages Of 4 Layer rogers fr4 pcb Own lamination process to convenient production for...

Friday 21 October 2022

Quantité : 1000tons - Prix : 0.01-100 USD/PCS

Custom Round Car Magnets 3/4 inch x 3/4 inch N52 Super Strong Magnets For Sale This powerful neodymium disc magnet measures 3/4" in diameter, 3/4" in thickness, with the pull force of 37.86 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers...

Friday 21 October 2022

Prix : 10-30USD

Number of layers: 2 Surface finish: ENIG Base material: Taconic TLY-5A Min. hole diameter: 0.3mm Outer Layer W: 1.046mil Outer layer S: /mil Thickness: 0.94mm Advantages Of 2 Layer Taconic PCB Own lamination process to convenient production for Multilayer PCB and shorten the lead time...

Friday 21 October 2022

Prix : 10-30USD

Number of layers: 2 size: 184.2*158.9mm Surface finish: LF-HASL Base material: Rogers 4350B Min. hole diameter: 0.4mm Minimum Line Width: 0.227mm Minimum Line Space: 0.127mm Thickness: 0.7mm Advantages Of 2 Layer Rogers LF-HASL PCB Own lamination process to convenient production for...

Friday 21 October 2022

Prix : 10-30USD

Number of layers: 2 size: 96.45*87.73mm Surface finish: ENIG Base material: Rogers 4350B Min. hole diameter: 0.5mm Minimum Line Width：/mm Minimum Line Space：0.139mm Thickness: 0.35mm Advantages Of 2 Layer Rogers ENIG Rf PCB Own lamination process to convenient production for Multilayer...

Friday 21 October 2022

Prix : 10-30USD

Number of layers: 2 size: 98.45*49.45mm Surface finish: ENIG Base material: Rogers 4350B Min. hole diameter: 0.5mm Minimum Line Width：/mm Minimum Line Space：0.139mm Thickness: 0.35mm Advantages Of 2 Layer Rogers PCB Own lamination process to convenient production for Multilayer PCB...

Friday 21 October 2022

Prix : 10-30USD

Number of layers: 2 Surface finish: ENIG Base material: F4B Min. hole diameter: 0.8mm Outer Layer W: 6mil Outer layer S: 6mil Thickness: 1.0mm Advantages Of 2 Layer F4B PCB Own lamination process to convenient production for Multilayer PCB and shorten the lead time. Jiangxi facility...

Friday 21 October 2022

Quantité : 1000tons - Prix : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 3/8" in diameter, 1/2" in thickness, with the pull force of 8.5lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Friday 21 October 2022

Quantité : 1000tons - Prix : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 3/8" in diameter, 1/2" in thickness, with the pull force of 10.52 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Friday 21 October 2022

Quantité : 1000tons - Prix : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 1/2" in diameter, 1/16" in thickness, with the pull force of 3.84lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Friday 21 October 2022

Quantité : 1000tons - Prix : 0.01-100 USD/PCS

Round Magnet N42 1/2 inch x1/16 inch Industrial Magnets For Sale This powerful neodymium disc magnet measures 1/2" in diameter, 1/16" in thickness, with the pull force of 3.1lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel...

Thursday 20 October 2022

A device for controlling the amplitude of the shaft of an ultrasonic scalpel. The amplitude is 55.5Khz±2Khz. Convert electrical energy into mechanical energy. It solves the technical problem that the amplitude of the existing ultrasonic scalpel shaft changes with the load and causes...

Thursday 20 October 2022

With a curved ultrasonic cutting blade, BBT Medical harmonic knife 36cm is compatible with BBT Medical ultrasonic surgical Generator 55.5Khz, Also other mark Generator in the market. The curved head structure design increases the effective anatomical length of the harmonic cutter...