SHEET|STEEL - 27383 Annonces

Tuesday 06 February 2024

Steel Wire Tube Brush Steel pipe brush has strong grinding force and is effective in removing rust, welding slag, paint and other attachments that are not easy to remove. It is often used for polishing and deburring the inner wall of metal holes. It is widely used in air conditioning compressors...

Tuesday 06 February 2024

The steel wire disc brush has strong grinding ability and is mostly used for the workpiece with low surface roughness requirements. Nylon sanding brush can effectively remove burr, welding slag, rust and so on in a very short time. For example, the large solid welding slag produced...

Tuesday 06 February 2024

This kind of steel bristle brush is mainly used on the surface of the workpiece, the internal polishing of the groove. We can provide an aluminum alloy base as required for installation. At the same time, the strip brush with steel bristles can be made in various types of derivative patterns...

Tuesday 06 February 2024

Silicon Carbide Disc Brush The Silicon Carbide Brush is specially used to deal with the surface of the metal, such as cast iron, aluminum, steel. Metal parts produced by cutting or die casting will inevitably have burr or flanging. If the burrs are not removed, it will lead to the...

Tuesday 06 February 2024

Our single cartridge type seal is manufactured by balanced seal-face technology, helping to reduce energy comsumption whilst increasing reliability. Cartridge Mechanical Seal Types Cartridge type mechanical seal is assembled by the rotary ring, stationary ring, spring, secondary seal( o rings...)

Tuesday 06 February 2024

Introduction of Seal Spare Parts Spring For a mechanical seal, the initial closing force ensures that the seal will function properly from startup. In end- or rotating-face mechanical seal designs, the initial closing force is provided by a spring component, which can be a single coil spring...

Tuesday 06 February 2024

Seal Spare Sleeve Mechanical Part In most pumps, the portion of the shaft that is under the sealing arrangement is covered with a shaft sleeve. The shaft sleeve is a sleeve of metal, usually bronze or stainless steel, that is designed to either slide or thread onto the shaft. It...

Tuesday 06 February 2024

Features of Cassava Stone Cleaning Machine Used to remove the stones in the material such as rigid particles of impurities, at the same time have an efficient function of cleansing and ascension Processing Capacity: 5-30Tons/hour Application Scope: Fresh potato washing to remove the...

Tuesday 06 February 2024

Cassava Garri(Gari) Process Description and Flowchart: Garri is a fermented and gelatinized dry coarse flour, very popular in West Africa and a staple food in Nigeria, Ghana, Benin, and Togo. Its ability to store well and its acceptance as a "convenience food" is responsible for...

Tuesday 06 February 2024

Features of Garri Fryer(Cassava Garri Fryer) Roasting be done mechanically using an automated garri fryer made of stainless steel material and with electricity, natural gas, firewood or charcoal as the heat source. The finished product (Garri) is usually recognized from the color...

Tuesday 06 February 2024

Features of Fufu Machine Fufu making machine for sale - Make Fufu(foofoo) from Fresh Cassava Fufu Machine Fufu Process Description and Flowchart: Fufu (variants of the name include foofoo, fufuo, foufou) is a staple food with deep roots in Ghana's history and common in many countries...

Tuesday 06 February 2024

The section of dewatering and drying has come to final steps of cassava processing, the vacuum dehydrator can remove as much moisture as possible and the flash dryer can dry the wet starch to the low moisture content of no more than 13% to achieve the starch storage standard. The...

Tuesday 06 February 2024

Quantité : 100000/day

Low ESR Winding Type Series Performance Characteristics of Low ESR Winding Supercaps Low internal resistance series supercaps. This product uses a new internal design and advanced materials to ensure low ESR. Typical Application of Low ESR Supercapacitor RAM, Detonator, car recorder...

Tuesday 06 February 2024

Prix : 0.5-3

FV Abrasive Film FV is one special flexible film made by RMC Abrasives. Taking advantage of special maker line, RIKEN RMC has designed this new item. Application of Imperial Diamond Lapping Film: FV film is a flexible product used in the field of ultra-fine sanding, with a stearated...

Tuesday 06 February 2024

Prix : 0.5-3

Portable flap wheels were made by bonding radial flaps of abrasive into a hub fitted with a spindle shank. These were intended for use with electric drills and were limited to a maximum speed of around 1,000 rpm. Specifications of Flap Wheel Abrasive Sanding Wheels With developments...

Tuesday 06 February 2024

Quantité : 100000/day

Performance Characteristics of Low ESR Winding Supercaps Low internal resistance series supercaps. This product uses a new internal design and advanced materials to ensure low ESR. Typical Application of Low ESR Cap RAM, Detonator, car recorder, smart meter, vacuum switch, digital camera...

Tuesday 06 February 2024

Prix : 0.5-3

Flap Discs Products Polishing Flap Disc As one of flap disc suppliers, RIKEN RMC Flap Discs provide a system for removing material and finishing in one step, thereby, reducing both finishing time and finishing costs. Use in applications such as weld grinding, deburring, rust removal...

Tuesday 06 February 2024

Prix : 0.5-3

Vulcanized fiber discs (commonly known as fiber discs) are round grinding wheels with a backing made of vulcanized fiber that is coated on one side with resin and abrasive grain. Abrasive fiber disc is fitted to suitable backing pads and used on angle grinders, predominantly for...

Tuesday 06 February 2024

Quantité : 100000/day

2.3V 3.8V Hybrid Capacitor Series Brief Introduction of 2.3V Hybrid Supercapacitor 2.3V hybrid digital capacitor is another important kind of supercaps produced by Kamcap. Following are the detailed information. To know ultracapacitor price, please contact us. 2.3V Hybrid Capacitors...

Tuesday 06 February 2024

Prix : 0.5-3

FF 3m micro abrasive film is one very soft abrasive film products. RIKEN RMC carefully designs 3m microfinishing film sheets, which are usually used in the polish field. Application of Microfinishing Film Sheets, Micro Abrasive PSA Film: RMC Abrasives FF is suitable for automotive...

Tuesday 06 February 2024

Prix : 0.5-3

RIKEN RMC F559 is a kind of aluminum oxide sandpaper for metal or wood with good flexibility and durable life. Premium Aluminum Oxide grain provides sharp, aggressive and high efficient performance, leaving the perfect surface with uniform scratch. Adopting premium imported Cwt...

Tuesday 06 February 2024

On the preservation line, sheets and profiles are thoroughly blast cleaned and provided with a temporary corrosion protection coating. Along with the external transportation unit, the preservation line consists of a pass through blasting and painting machine, a painting unit and a...

Tuesday 06 February 2024

Floor shot blaster is a kind of shot blasting machine for concrete floors, steel plates. The bead blaster floor machine can clean up the floatation and impurities on the surface of the concrete at one time. It can also roughen the surface of the concrete road to make it uniform and rough...

Tuesday 06 February 2024

H beams shot blasting machine is the most efficient and the most effective process to remove all forms of rust and corrosion materials from h beams prior to painting or coating. It is more efficient than steel beam shot blasting machine, steel bar shot blasting machine and scaffolding...

Tuesday 06 February 2024

Rotary shot blasting machine or table type shot blasting machine is suitable for various shapes and dimensions, casts, forged parts, pressed parts, steel, and non-ferrous metal parts and parts made from fragile materials, cleaning surface, removing casting sand and filings, consolidating...

Tuesday 06 February 2024

Wire mesh shot blasting machine or conveyor belt shot blasting machines is suitable for continuous blasting thin and collision-sensitive die castings, pressure castings, ferrous and non-ferrous castings, forgings, automotive accessories, and weldments. Workpiece weight ranging from...

Tuesday 06 February 2024

HYDRAULIC CNC TURRET PUNCH MACHINE The driving system of the Y30 series cnc hydraulic plate punching machine, with low noise, high speed, and high efficiency, and the thickness of the punching plate is 6mm. The design of high precision and high repetitive positioning accuracy enables...

Tuesday 06 February 2024

PIPE SHOT BLASTING MACHINE Free Quote Pipe shot blasting machine or steel pipe blasting machine is suitable for any diameter and length of steel pipe cleaning, it can remove the oxide, rust, and scale from welded steel pipe, so that the pipe surface shows metallic colors. Pipe outer...

Tuesday 06 February 2024

This shape of a mold is predetermined by a mould, a block that has been hollowed out. Aluminum, steel, alloys, and copper are the most common materials used to build it. It's made up of various other mold parts, too. Our mold spare parts include lifters and ejectors as well as guides...

Tuesday 06 February 2024

When it comes to plastic injection mold parts, precise moulds and precision equipment are required for precision molding or PIM. Among the topics covered in this blog are general ideas, specific traits and qualities, as well as specific options for plastic materials, precision moulds...