WORKING - 17083 Annonces

Wednesday 01 March 2023

The water for injection preparation system is a key GMP system. Multi effect water distiller is the key equipment of the most widely used WFI preparation system at present. BIOCELL's multi column distillation plant adopts high temperature and high pressure operation to ensure stable...

Wednesday 01 March 2023

Clean steam generator using electric energy as heating source is referred to as electric heating clean steam generator. The steam generated after the purified water is heated and evaporated by the electric heating clean steam generator, through the centrifugal separation structure...

Wednesday 01 March 2023

Electrodeionization Water Treatment EDI module is usually placed behind the reverse osmosis system, which not only overcomes the lack of deep desalination of reverse osmosis effluent, but also further removes trace carbon dioxide, residual salt, silicon dioxide, boron and total organic...

Wednesday 01 March 2023

The prototype of the clean steam generator is a pure steam generator in the pharmaceutical industry. In structural design, it simplifies and weakens the complex steam water separation structure. Compact structure, small floor area, no water storage, high quality of clean steam. It...

Wednesday 01 March 2023

Pharmaceutical Water Systems Water is the most widely used process raw material in the pharmaceutical industry, which is used as the composition, solvent and diluent of drugs. Pharmaceutical water is mainly divided into two categories: Purified water: it is pharmaceutical water prepared...

Wednesday 01 March 2023

Prix : 1＄-100＄

The new energy connector for energy storage module equipment developed by AP is able to realize the positive and negative connections and 360° rotating connection. And the products comply with TUV/UL, and RoHS certification and the quality is stable and reliable. This energy storage...

Wednesday 01 March 2023

Prix : 1＄-100＄

GB T Charging Connector is widely used in the DC charging system of electric vehicles and conforms to GB/T 20234.2 standard. It is compatible with multi-type brand vehicles, which is able to ensure safe and continuous charging, and real-time monitoring of temperature control. Features...

Wednesday 01 March 2023

Prix : 1＄-100＄

AP DC charging connector meets international standards. It is equipped with third-generation technology, ergonomic design, and excellent protection performance. It is able to meet IP 55 waterproof level in working condition. DC Fast Charging Connector of Different Standards DC GB/T...

Wednesday 01 March 2023

Prix : 1＄-100＄

AP contact pins for SAE meet international standards. It is equipped with the newest technology and ensures excellent working performance. Meanwhile, It is able to reach IP67 waterproof level in working condition. Types of Contact Pins For Sae EV Charging Plug DC CCS Type1 Connect...

Wednesday 01 March 2023

Quantité : 100000000 - Prix : 5,00 €

Supplier: Grande Electronics Layers: 4 Application: Battery Protection Circuit Module (PCBA) - Electronics Surface Mount Assembly PCB: FR4/1.6mm/1oz Min Via: 0.2mm Surface Treatment: HASL PCBA Lead time: 3-4 weeks Testing: 100% E-test Standard Warp: <0.75%</p> [Description] 1...

Wednesday 01 March 2023

Quantité : 100000000 - Prix : 5,00 €

Supplier: Grande Layers: 4 Application: Customized Printed Circuit Board PCBA For Automatic Parking System PCB: FR-4/1.6mm,1oz finished copper Surface Treatment: ENIG PCBA Lead time: 3-4 weeks Packing: Anti-static bag and compartmental packing Standard Warp: <0.75%</p> [Description] 1...

Wednesday 01 March 2023

Quantité : 100000000 - Prix : 5,00 €

Supplier: Grande Electronics Layers: 6 Application: ARM Multilayer PCB Assembly Prototype- Custom PCBA SMT PCB: FR-4/1.6mm, 1oz finished copper Surface Treatment: HASL PCBA Lead time: 3-4 weeks Packing: Anti-static bag and compartmental packing Standard Warp: <0.75%</p>...

Wednesday 01 March 2023

Quantité : 100000000 - Prix : 5,00 €

Supplier: Grande Electronics Layers: 4 Application: Battery Protection Circuit Module (PCBA) - Electronics Surface Mount Assembly PCB: FR4/1.6mm/1oz Min Via: 0.2mm Surface Treatment: HASL PCBA Lead time: 3-4 weeks Testing: 100% E-test Standard Warp: <0.75%</p> [Description] 1...

Wednesday 01 March 2023

Quantité : 100000000 - Prix : 5,00 €

Supplier: Grande Electronics Layers: 6 Application: Safety and Emergency Devices and Equipment Assemble PCB and Manufacturing PCB: FR-4/1.6mm,1oz finished copper Surface Treatment: ENIG PCBA Lead time: 3-4 weeks Packing: Anti-static bag and compartmental packing Standard Warp: <0...

Wednesday 01 March 2023

Quantité : 100000000 - Prix : 5,00 €

Supplier: Grande Electronics Layers: 4 Application: Communication Server PCB Board - Grande - PCB Assembly Manufacture PCB: FR4/1.6mm/1oz Min Via: 0.2mm Surface Treatment: ENIG PCBA Lead time: 3-4 weeks Testing: 100% E-test Standard Warp: <0.75%</p> [Description] 1,Turnkey...

Wednesday 01 March 2023

Quantité : 100000000 - Prix : 5,00 €

Supplier: Grande Layers: 4 Application: ESS (Energy Storage Systems) Prototype PCB Assembly - Grande Electronics PCB: FR4/1.6mm/1oz Min Via: 0.2mm Surface Treatment: HASL PCBA Lead time: 3-4 weeks Testing: 100% E-test Standard Warp: <0.75%</p> [Description] 1, Turnkey solution...

Wednesday 01 March 2023

K-2.0T IC FORKLIFT Lower pollution; Ergonomics Improved; Reliability Improved; This lift truck is equipped with high performance engine to meet EU EC and USA EPA new regulations. Automatic monitor control system could ensure the monitor working stably and safely. K-2.5T IC FORKLIFT K-2...

Wednesday 01 March 2023

Heavy Duty Diesel Forklift Truck 12-13.5MT Product Features: Drivelines: Cummins 6.7 engine or FAWDE(Wuxi diesel) engine meeting national level 3 (EU3) emission standard is assembled on the truck. This model possesses strong drive power and good weather-resistance. Transmission...

Wednesday 01 March 2023

Quantité : 100000000 - Prix : 5,00 €

Supplier: Grande Electronics Layers: 4 Application: Printed Circuit Board Assembly in Uninterrupted Power Supplies (UPS) System PCB: FR4/1.6mm/1oz Min Via: 0.2mm Surface Treatment: ENIG PCBA Lead time: 3-4 weeks Testing: 100% E-test Standard Warp: <0.75%</p> [Description] 1...

Wednesday 01 March 2023

Quantité : 100000000 - Prix : 5,00 €

Supplier: Grande Layers: 4 Application: Digital Weighing Scales 1 oz 4 Layers PCB Assembly EMS Service PCB: FR-4/1.6mm, 1oz finished copper Surface Treatment: HASL PCBA Lead time: 3-4 weeks Packing: Anti-static bag and compartmental packing Standard Warp: <0.75%</p> [Description] 1...

Wednesday 01 March 2023

1.5T AC ELECTRIC REACH TRUCK - STAND-UP TYPE 1.5T electric reach truck-stand-up type, flexible, compact in appearance, no emissions, low noise, working in narrow field, suitable for tobacco, textile, food, supermarket and other industries; Due to the stand-up driving, good vision...

Wednesday 01 March 2023

Prix : 1000-6000USD

Technology Specification: The design meets the requirement of API SPEC 6A. Nominal bore: 21/16″-41/16″ Rated working pressure: 2000-20000PSI Rated working temp: K、L、P、R、S、T、U、V Material class: AA, BB, CC, DD, EE, FF Product specification level: PSL1-PSL3G Performance requirement level...

Wednesday 01 March 2023

Prix : 1000-6000USD

A centrifugal mud pump is a pump that delivers liquid by centrifugal force generated when the impeller rotates. Structural Features of Centrifugal Pumps: In a volute-shaped pump casing, an impeller that can rotate rapidly is installed, and there are 2 to 8 blades on the impeller....

Wednesday 01 March 2023

Prix : 1000-6000USD

Brief Introduction and Characteristics of Reciprocating Pump Single and double acting reciprocating pump relies on the reciprocating operation of plug or plunger pump cylinder to periodically expand the working volume of pump cylinder and shrink the suction and discharge liquid reciprocating...

Wednesday 01 March 2023

Prix : 1000-6000USD

We provide a complete range of bearings, in line with the market-oriented principle, the production of a variety of standard and non-standard bearings. Application fields include: construction machinery, wind power generation, offshore platform, petroleum metallurgy, shipbuilding...

Tuesday 28 February 2023

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Tuesday 28 February 2023

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Tuesday 28 February 2023

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Tuesday 28 February 2023

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Tuesday 28 February 2023

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...