HTML - 27230 Annonces

Saturday 01 July 2023

The cam valve sensor collects the position signal of the valve camshaft and inputs it to the ECU, so that the ECU can identify the compression top dead of cylinder 1, so as to perform sequential fuel injection control, ignition timing control and detonation control. In addition, the...

Saturday 01 July 2023

automotive parts industry / automobile parts manufacturing industry / industry auto parts The cabin filter filters the air in the car compartment and the air circulation inside and outside the car, and removes the air dust, impurities, smoke odor, pollen, etc. that enter in the car...

Saturday 01 July 2023

Sensors used in automobile industry convert non-electrical signals into electrical signals and provide the vehicle ECU with information on various operating conditions, including vehicle speed, temperature, and engine operation. The application scenarios of automotive sensors are very extensive...

Saturday 01 July 2023

Air Filter Application The vehicle engine needs to inhale a lot of air during the working process, and the air contains a lot of dust and particles. The air filter filters the particles and impurities in the air to ensure that the engine air is clean. The air filter can reduce the...

Saturday 01 July 2023

The high temperature and high pressure refrigerant from the condenser enters into the expansion valve, due to the reduction of the internal section of the expansion valve, the throttling effect is achieved, the refrigerant pressure drops. The refrigerant fluid passage suddenly becomes...

Saturday 01 July 2023

The automotive air-conditioning compressor converts the low-temperature, low-pressure gaseous refrigerant from the evaporator into a high-temperature, high-pressure gaseous refrigerant through compression and sends it to the condenser, it is the heart of the automotive air-conditioning...

Saturday 01 July 2023

Prix : 5000-50000USD

Plastic Film Crusher The plastic film crusher produced by our plastic film crusher factory is mainly used for the crushing of various film waste plastics, such as: domestic waste film, mulch film, greenhouse film, paper mill waste plastic film, composite packaging film, Tetra Pak, etc...

Saturday 01 July 2023

Prix : 5000-50000USD

Plastic Film/Plastic Bag Squeezer The plastic film squeezing machine is mainly used for: film material after washing or film material with relatively high moisture content. The moisture content will be less than 4% after using our squeezing machine. And the material will be semi-plasticized...

Saturday 01 July 2023

The coil fed punching machines is widely applied in steel furniture, electrical cabinets, elevator, etc. industries. Which can be combined with laser cutting, panel bender, Robert loading and unloading system, can realize the 24 hours unmanned processing and the electricity consumption...

Saturday 01 July 2023

The coil laser cutting machine combines with the de-coiling system, leveling system and laser cutting system. It's suitable to process the multi shape of products, can realize customized manufacturing. Compared with traditional coil processing lines, our sheet metal coil line machine...

Saturday 01 July 2023

Remcor Apollo BK series three chuck tube lazer cutting machine can cut all types of metal tubes, from mild steel to stainless and also non-ferrous metals. It is also valid for cutting some reflective metals like aluminum, brass and copper, etc. The thickness of the metal can be anywhere...

Saturday 01 July 2023

The electric type of vacuum suction device can be applied in feeding and blanking of the glass, sheet metal, marble, etc. material. The maximum weight capacity can be 2500KGS. We will ODM the most suitable sheet metal grip vacuum lifting equipment for you that ensure can use for...

Saturday 01 July 2023

Remcor 3 in 1 laser welding machine and cleaning machine integrates three functions. One machine can get the multi-purpose, it's much more cost saving on machines, labors and spaces. Apply with a continuous laser source, which can have 3-5 times faster in welding speed and cleaning...

Saturday 01 July 2023

Degradable shopping bag is a type of plastic bag that is designed to break down into smaller pieces over time, rather than persist in the environment indefinitely. These epi degradable bag are typically made from biodegradable plastics, which are made from renewable resources such as corn starch...

Saturday 01 July 2023

Biodegradable bags for garbage, also known as biodegradable garbage bags, are made of materials extracted from plants, such as plant starch and corn flour, which do not cause any harm to human body and the environment. Features of Degradable Rubbish Bag The use of biodegradable disposable...

Saturday 01 July 2023

Container desiccant, made of super absorbent material, it can effectively control the humidity in the container, eliminate the hidden danger of "container rain" caused by the temperature difference between day and night at sea, and ensure the safety of customers' cargo transportation by sea...

Saturday 01 July 2023

Made of super absorbent material, it can effectively control the humidity in the container, eliminate the hidden danger of "container rain" caused by the temperature difference between day and night at sea, and ensure the safety of customers' cargo transportation by sea. Ask our technical...

Saturday 01 July 2023

The shoes are easy to get moldy issue, especially due to the leather materials and glue. There are many Kobso products can use in the shoes packing, such as Mold Prevention Packet, Anti-mold Sticker, Mold Prevention Packing Paper, Mold prevention desiccant. During in the warehouse...

Friday 30 June 2023

PERFORMANCE SPECIFICATION OF COLD ROLLED STEEL PRODUCTS High quality cold rolled steel plate products have good performance, i.e. through cold rolling, you can get cold rolled strip and steel plate with thinner thickness and higher precision, high straightness, high surface finish...

Friday 30 June 2023

Cold rolled steel for sale is obtained by pulling the mold into bars that are smaller than the hot-rolled size. After additional rolling, grinding, polishing, the appearance of cold-drawn steel bars is brighter, and its tolerance is similar to hot rolled drawn steel bar. During the...

Thursday 29 June 2023

Wind energy fasteners are important basic mechanical parts in the wind power industry. In order to cope with the energy crisis and protect the ecological environment, many countries in the world have begun to vigorously promote the adjustment of energy structure. As a clean and renewable...

Thursday 29 June 2023

Magnetic Performance: Br: 10.4 kGs, Hcb: 9.8 kOe, Hcj: 10.6 kOe, (BH)max: 26 MGOe Magnetic Strength: 31 LBS each Pole Orientation: Magnetized through 1/2", magnetic poles are on the 2x1/2" surfaces Maximum Operating Temperature: 608 degree F or 320 degree C MEANK produces high-quality...

Thursday 29 June 2023

Shape Disc Material NdFeB Grade N42 Diameter 22mm Thickness 11.4mm Strength 7,1 kg Working Temp. Max. 80°C Weight 24g The waterproof neodymium disc magnets 22x11.4mm are fully coated with rubber,N42 grade give them about 7.1kgs magnetic force, which is powerful enough...

Thursday 29 June 2023

Magnet Type Adhesive Block Material NdFeB Grade N35 Size 20x20x1mm Magnetization Through 1mm Coating NiCuNi Max.Temp. 80°C Force 1.1kgs If you need a strong stick on magnets for your project, the square adhesive magnets 20x20x1mm are ideal ones. They are made with...

Thursday 29 June 2023

Axially magnetized rare earth samarium cobalt magnet rings with dimension of 1" (25.4mm) OD x 1/2" (12.70mm) ID x 1/4" (6.35mm) thick. Magnetic Performance: Br: 10.4 kGs, Hcb: 9.8 kOe, Hcj: 10.6 kOe, (BH)max: 26 MGOe. Pole Orientation: Magnetized through 1/8", magnetic poles are on...

Thursday 29 June 2023

Diameter 22mm Thickness 6mm Thread M3 - M6 Weight(g) 9 Color black Pull Force(Kg) 3.5 It' s smallest rubber coated waterproof magnets that with internal thread mounting hole,standard size is 22mm in diameter and 6mm in thick,they hold about 3.5kgs, the thread range from M3 to M6...

Thursday 29 June 2023

Quantité : 2000 - Prix : 8000~100000

What Is Film Lighting Design? Film lighting design is the process of creating a lighting setup for a film or television production. It involves determining how much light the scene needs, where it should come from, and what kind of equipment is needed to create the desired effect...

Thursday 29 June 2023

The watch without second hand has a super thin watch dial about 6 mm. Therefor, the watch is more fit the wrist than the traditional three hands watches. FEATURE OF STAINLESS STEEL BLACK QUARTZ WATCH NO SECOND HAND The color of watch hands and index is rose gold, which is in collision...

Thursday 29 June 2023

This super-thin watch has been set in a solid wooden watch dial. The watch bezel is also applied walnut wood along with the dial. FEATURE OF STAINLESS STEEL WOODEN DIAL WATCH WITH 19 MM WATCH BANDS There is a calendar window here, and you can make more possibilities in the wooden...

Thursday 29 June 2023

The leather strap quartz watch displays two colors for choices. It is Black and golden, Levander grey and black. FEATURE OF STAINLESS STEEL WITHOUT NUMBER WATCH WITH LEATHER BAND The first one is white dial in gold watch case match with black leather strap. The other one is black...