OVERMOLDING - 83 Annonces

Vendredi 16 décembre 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

Automotive Water Inlet Manifold Injecting gas through the nozzle is a typical method used in rod-shaped products, because this method does not require frequent changes to the mold and is versatile, but the disadvantage is that the nozzle needs to be modified and the single-use cost is high...

Vendredi 16 décembre 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

Injection Moulding Automotive Parts features: 1. The part material is made by PP-TD20 normally, the part surface will make leather texture which is very high, and he product surface is not allowed to have thimble marks, gate marks, sink marks, welding marks and flash or any other defects; 2...

Vendredi 16 décembre 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

The same type of material of different colors is usually used for two-color injection molding（or 2k molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements of the product, the performance difference...

Mardi 13 décembre 2022

Assembly Parts Meaning 100+ Various materials are available. Support parts assembly service. As part of our machining and fabrication services, Xin Pin offers part and assembly prototyping. How will a final product look? Will it work properly? How can it best be explained to a client...

Vendredi 09 décembre 2022

ISO Class 8 Clean Room  Quality Control  Low & High Volume Manufacturing  Competitive Price  Reliability and Stability For more than 15 years, Packson Mold has become an excellent manufacturer that is enabled to make parts with high tonnage and large size thanks to our one-stop facility...

Mardi 08 novembre 2022

By cooperating with the injection grade TPU with molding ability and excellent sealing characteristics, entire product solution could be formed fast. Technical Data of Injection Molding TPU Technical Data Sheet Model Material Properties Test Standard Test Condition Unit 1182B-RSS-1531S...

Mardi 08 novembre 2022

Injection-grade TPE Products Characterization: High fluidity. Soft-touch. Overmolding compatibility with TPE/PP/PE cable. Application TPE wire sheaths. Overmolding PP/PE. Stationery. Tool grip. Sporting equipment TPE injection guidance 1. Previous drying of the product 2 hours at 80℃ 2...

Jeudi 20 octobre 2022

Quantité : USD3000-20 - Prix : 30-40sets/per month

Most of the smart home appliance products are electrical products and need to be connected with strong and weak electricity, most of the inner and outer shells are made by PC+ABS, ABS, and PC materials in V0 class because fireproof materials are highly corrosive, and the mold steel...

Samedi 17 septembre 2022

Assembly Parts Definition 100+ Various materials are available. Support parts assembly service. As part of our machining and fabrication services, Xin Pin offers part and assembly prototyping. How will a final product look? Will it work properly? How can it best be explained to a client...

Mardi 02 août 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

The same type of material of different colors is usually used for two-color injection overmolding（or 2k injection molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements of the product, the performance...

Mardi 02 août 2022

Overmolding mold is made of overmolding injection molding process which is a special injection molding process that can combine various materials into a single part. Through mechanical and/or chemical bonding of two plastic materials, the overmolding injection molding process can...

Mercredi 22 juin 2022

Prix : 5000USD-30000USD

Custom Mold & Design The overmolded parts is a process that can bond different materials by the injection moulding. Plastic injection overmolding in HanKing is a technology to combine two different moulds while we called the combination of different resins in one mould as two-shot...

Mardi 21 juin 2022

Electronic parts 2k Electronic Drip Tip Mold advantages: 1. It can be produced very precise products; 2. The injection molding cycle is short, suitable for large-volume products; - Good product consistency and low defect rate. If you need high quality plastic moulding services, please...

Mardi 21 juin 2022

16 Cavity Mold This mold will use 4 pin-points hot nozzles for gating, and one nozzle will control 4 pieces of parts gating in order to achieve filling balance. Product material: PP material in medical-grade Mold steel: S136 HRC 52-54 Mold life: 1 million Hot runner brand: mold master Mold base...

Mardi 14 juin 2022

Overmolding mold is made of overmolding injection molding process which is a special injection molding process that can combine various materials into a single part. Through mechanical and/or chemical bonding of two plastic materials, the overmolding injection molding process can...

Mercredi 11 mai 2022

100+ Various materials are available. Support parts assembly service. As part of our machining and fabrication services, Xin Pin offers part and assembly prototyping. How will a final product look? Will it work properly? How can it best be explained to a client? Xin Pin will help...

Mardi 19 avril 2022

Overmolding mold is made of overmolding injection molding process which is a special injection molding process that can combine various materials into a single part. Through mechanical and/or chemical bonding of two plastic materials, the overmolding injection molding process can...

Jeudi 10 mars 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

Pipette Tip Mold USM as a medical plastic injection moulding supplier provides products including medical device plastic parts, suction tips, blood collection devices, pregnancy test sticks, culture tubes, ventilator masks, etc. All plastic parts which will be used in the medical...

Jeudi 10 mars 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

Insert Mold USM molds focus on structural insert molding service, gas-assisted water-assisted molds, small parts plastic molds, precision plastic molds, and plastic parts product molds, from mold design to mold manufacturing, mold assembly test molds, product injection molding processing...

Mercredi 09 mars 2022

Prix : 100USD

Two shot molding, also called double shot moulding, dual shot injection molding，multi shot injection molding or 2k injection moulding is one category of injection molding using two different thermoplastic materials to produce injection molded parts in two colors or two components...

Mercredi 09 mars 2022

Prix : 100USD

What is plastic injection molding? Plastic Injection molding is a molding method that combines injection and molding. The advantages of plastic injection molding method are fast production speed, high efficiency, operation can be automated, variety of colors, shapes can be from simple to complex...

Mercredi 09 mars 2022

Prix : 100USD

Over molding is a special plastic molding process. Overmolding insert molding is similar to the two-color molding or two-shot molding process. Metal overmolding can make the surface of the product full of softness and increase product functionality and added value. With this technology...

Mercredi 09 mars 2022

Prix : 100USD

Insert molding is one category of injection molding that allows preformed parts or components, usually metal inserts, to be inserted into the plastic molded parts and to have a final product in one-step process. Insert moulding has characteristics as below: A combination of two parts...

Mercredi 09 mars 2022

Prix : 100USD

What material is used in injection moulding？Materials used in injection moulding generally include pla molding, nylon injection molding, polypropylene plastic injection molding, pp injection moulding, pvc injection molding, hdpe injection molding and so on. Injection moulding raw...

Dimanche 20 février 2022

For more than 15 years, Packson Mold has become an excellent manufacturer that is enabled to make parts with high tonnage and large size thanks to our one-stop facility. We are keen to meet your injection molding needs with single and convenient sources. Thanks to our advanced equipment...

Mardi 30 novembre 2021

COSMOPlat is wholly owned by Haier Group which is a world-leading provider of solutions to better life. As the world's first and only IoT ecosystem brand, Haier COSMOPlat has been included on the list of BrandZ™ Top 100 Most Valuable Global Brands for two consecutive years. Haier...

Mercredi 18 août 2021

LC Rapid is an expert of best injection molding companies in advanced technology when it comes to plastic injection mold manufacturing. With advanced technology, high quality plastic material, good quality control process, decades of manufacturing experience and a team of experienced...

Mardi 20 juillet 2021

Prix : 10-30USD

Founded in 1978, Zhongde is a professional manufacturer focusing on OEM & ODM customized services. Based on 40 years technology deposition, we have developed a one-stop solution from mold designing and rapid prototyping to mass production. Our manufacturing capabilities include...

Mardi 20 juillet 2021

Prix : 10-30USD

Founded in 1978, Zhongde is a professional manufacturer focusing on OEM & ODM customized services. Based on 40 years technology deposition, we have developed a one-stop solution from mold designing and rapid prototyping to mass production. Our manufacturing capabilities include...

Mardi 20 juillet 2021

Prix : 10-30USD

Founded in 1978, Zhongde is a professional manufacturer focusing on OEM & ODM customized services. Based on 40 years technology deposition, we have developed a one-stop solution from mold designing and rapid prototyping to mass production. Our manufacturing capabilities include...