PERFORMANCE SYS - 17732 Annonces

Saturday 04 March 2023

Industrial Plastic Injection Mold The industrial moulding part is replacing metal products in many fields of industrial applications to meet the requirement of lightweight industrial equipment and cost-reduction. Green Vitality has accumulated many experiences over the years in providing...

Saturday 04 March 2023

GV Mold has rich experience in home appliance parts (such as television, refrigerators, fans, washing machines, air conditioners, and various smart home appliances). We can provide turnkey solutions for high-precision houseware moulds according to customers' ideas, from raw material...

Saturday 04 March 2023

Prix : US$1.00

The fuel vapor vent pressure sensor is used to control the fuel pressure in the fuel circuit, maintain a constant fuel supply pressure to the injector, and return excess fuel to the fuel tank. The fuel pressure acts directly on the diaphragm of the sensor, causing the diaphragm to...

Saturday 04 March 2023

Prix : US$1.00

The fuel pump and fuel level sensor uses the principle of the magnetic field generated by the ferrite magnet to control the on-off of the reed switch, and converts the change of the measured fuel level into a resistance voltage signal output. This fuel sending unit sensor connects...

Saturday 04 March 2023

Prix : US$1.00

Auto fuel injector, is a part that injects fuel into the engine cylinder. It also is a simple solenoid valve. When the solenoid coil is energized, the suction force is generated, the needle valve is sucked up, the nozzle hole is opened, and the fuel is ejected at a high speed through...

Saturday 04 March 2023

Prix : US$1.00

For vehicle engines, the Fuel Filter includes Diesel Filter and Fuel Filter Diesel Filter elements mostly use filter paper, and some use felt or polymer materials. Diesel filters can be divided into diesel water separators and diesel fine filters. The important function of the fuel-water...

Saturday 04 March 2023

If the weight of each fan blade is not balanced, large vibration, high noise, and large wear of the rotating shaft will occur during high-speed rotation, which not only seriously affects product performance, but also The lifetime will also be greatly reduced. Therefore, fan products...

Saturday 04 March 2023

SMILE-G3 3.6 / 5 kW10.1 - 60.5 kWh YOUR ALMIGHTY KNIGHT This residential ESS is with 3.6/5kW hybrid single-phase inverter and 10kWh battery module. This product can capture more precise data for stricter VPP requirements. Also, in off-grid scenario, this one has better performance...

Saturday 04 March 2023

The BIDI SFP transceivers are high-performance, cost-effective modules supporting dual data-rate of 155Mbps and 40km transmission distance with SMF. The sfp tx transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA...

Saturday 04 March 2023

The sfp bd transceivers are high-performance, cost-effective modules supporting a dual data rate of 155Mbps and a 20km transmission distance with SMF. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA...

Saturday 04 March 2023

The SFP+ transceivers are high-performance, cost-effective modules supporting a data rate of 10Gbps and 60km transmission distance with SMF. China gbic transceiver consists of three sections: a DFB laser transmitter, an APD photodiode integrated with a trans-impedance preamplifier (TIA)...

Saturday 04 March 2023

Prix : USD3000-USD10000/ton

Description of compostable salad bowl Economical disposable products. Using this set of high-end disposable tableware, you can obtain the appearance and performance of exquisite table settings, the convenience of throwing dirty dishes after use, and the uniqueness of this unexpected...

Saturday 04 March 2023

Quantité : 1-10,000pc - Prix : 0.03-30USD/pcs

Fastlink helps customers finish a lot of projects including smart phone, smart TV, tablet pc, laptop, smart wearable devices, TWS etc. We can produce a maximum 24L rigid pcb plus 8 layer flex pcb. Customized rigid flex pcb can safely bend into small and complicated electronics, making...

Saturday 04 March 2023

Quantité : 10000 - Prix : 4-10000USD

Under the effect of the WOB and the twist of the drill string, the teeth of the tci tricone bit are crushed and eaten into the rock, and at the same time there is a corresponding sliding to shear the rock. When it rolls at the bottom of the well, the teeth on it will impact and press...

Saturday 04 March 2023

Quantité : 10000 - Prix : 4-10000USD

The teeth are processed by milling, and the teeth are all wedge tooth. Using floating bearing structure. Using high -density metal sealing. Steel ball lock the tooth wheel to adapt to high speed New wear -resistant materials for steel drilling teeth,increased the drill head cutting...

Saturday 04 March 2023

Quantité : 10000 - Prix : 4-10000USD

The entire bit body of the pcd drill bit is made of medium carbon steel and machined using a fabrication process. The bit crown is treated with a surface hardening process (sprayed tungsten carbide wear layer, carburized) to enhance erosion resistance. Specification Of Steel PDC Drag...

Saturday 04 March 2023

Quantité : 10000 - Prix : 4-10000USD

The drill body of the Steel PDC Bit is made of a whole piece of alloy steel by machining, and the cutting teeth are made by welding the composite piece on the tungsten carbide material tooth post, and then the cutting teeth are inlaid on the drill body, and the diameter-preserving...

Saturday 04 March 2023

Quantité : 10000 - Prix : 4-10000USD

Wholesale Shaped Cutter PDC Bit (PDC)Polycrystalline diamond composite is a composite material in which thin layers of polycrystalline diamond are bonded to a cemented carbide substrate. Polycrystalline diamond composites combine the high wear resistance of polycrystalline diamond...

Saturday 04 March 2023

Quantité : 10000 - Prix : 4-10000USD

There is no fixed tooth shape and bearing for the hdd rock reamer, so it is necessary to select appropriate tooth shape and bearing structure according to different stratum structure. It adopts the palm back tilt, cold inlaid anti - ruin gold design, with the roller anti-peeling structure...

Saturday 04 March 2023

Prix : 100USD

Chloro butyl rubber CIIR is a copolymer rubber of chloro isobutylene and isoprene. It has many of the attributes of butyl rubber, including low gas and moisture permeability, good vibration damping, low glass transition temperature, excellent resistance to ageing and weathering. Compared...

Saturday 04 March 2023

3003 aluminum coil is a non-heat-treated alloy, and its mechanical properties can be improved by conventional cold processing. It is an AL-Mn alloy, which is the most widely used rust-proof aluminum. The strength of this alloy is not high (slightly higher than that of industrial pure aluminum)...

Saturday 04 March 2023

A typical hard aluminum alloy in the aluminum-copper-magnesium series, its composition is relatively reasonable, the overall performance is better, and it is the largest amount of hard aluminum. Application of china 2024 aluminum It is often used in automobile and truck wheel hubs...

Saturday 04 March 2023

Prix : 100USD

Butyl rubber is a synthetic elastomer made by combining isobutylene and isoprene. It is a white or off-white translucent elastomer with a density of 0.91~0.92g/cm. Butyl rubber has poor molecular chain flexibility and compact structure, and its air tightness is the first among rubbers...

Saturday 04 March 2023

Prix : 100USD

Bromo butyl rubber BIIR is a copolymer rubber of bromo isobutylene and isoprene. It is derived from halogenating butyl rubber with bromine in a continuous process. Bromo butyl rubber possesses other fundamental advantages including stability at high temperatures, rejuvenating capabilities...

Saturday 04 March 2023

The China 2014 aluminum alloy with Cu as the main alloy element has high strength and good cutting performance. Good tensile strength. Buy China 2014 aluminum sheet from CAISC, a professional 2014 aluminum supplier. Application of 2014 Aluminium Sheet EN AW 2014 aluminium alloy sheet...

Saturday 04 March 2023

Around the world and across industries, sealing products are critical to safety and efficiency. Sealing manufacturers in the market generally lack effective solutions for durability and sustainability, But Longsheng did this by leading the transition toward safe, sustainable, high-performance...

Friday 03 March 2023

Quantité : 50000sets/ - Prix : 10-500USD/SET

The coefficient of friction on a linear guideway is only 1/50 compared to a traditional slide and they are able to take loads in all directions. With these features, VXO linear guideway manufacturers' linear motion guideways can achieve high precision and greatly enhanced moving accuracy...

Friday 03 March 2023

Quantité : 5000-10000 - Prix : USD 0.03---USD 0.3

With the global population and economic growth, customers pay more attention to their personal care issues, which creates an increasing background for the disposable hygiene industry. The quality and quantities of high-performance disposable hygienic products, such as baby diapers...

Friday 03 March 2023

The intake manifold is a component of an automobile engine that supplies a mixture of air to different cylinders. Any failure of the intake manifold in car engine in an automobile can affect the performance of the engine brake and ignition piston engine. SDZ is pushing hard to integrate...

Friday 03 March 2023

Various hoses play important role in engine working. Accumulating much experience in serving aftermarket and OEM customers, SDZ supplied OE quality engine hoses noted for durability to wide vehicle models. We focus on the design and development of car cooling system parts in cooling...