PIPES - 7645 Annonces

Thursday 11 April 2013

Quantité : 15-20sets/ - Prix : 1500-2000USD/set

Plate Oil Filter Introduction The plate edible oil filter is always used as a purifier in edible oil processing plants. Plate oil filter can be matched with oil press Model Whirlston series screw oil press and Whirlston hydraulic oil press to make the much higher quality edible oil...

Thursday 11 April 2013

Quantité : 15-20sets/ - Prix : 1500-2000USD/set

Integrated Screw Oil Press Introduction Integrated screw oil press is an advanced oil pressing machine nowadaysin the market. It is used for processing edible oil from a wide range of oil plants such as peanuts, rapeseed, cotton seeds, sesame seeds, sunflower seeds and coconut seeds and so on...

Sunday 07 April 2013

Quantité : 1SET - Prix : USD12100

Brief Introduction： The machine is special purpose for filling spray. pharmaceuticals and cosmetic industry Characteristic： 1、All elements is well know brand. Direct viewing suring accurate, no bottle no capping. 2、Cap adding device, ensure pipe of cap into mouth bottle easy...

Thursday 31 January 2013

Quantité : 1 set/sets - Prix : $500-1000

1. More stronger than tunnel greenhouse, Foundation is required 2. Big inside room, suitable for large area. 3. Usually used to grow vegetables such as tomato, cucumber, chili etc, also grow cut flowers 4. All structure by hot galvanized steel pipe, Anti-rust for 10-15 years 5...

Thursday 31 January 2013

Quantité : 1 set/sets - Prix : $500-1000

1, hot galvanized steel pipes for main structure, anti rust for 10 to 15 years 2, film available: 80/100/120/150/180/200 micron thickness 3. natural ventilation: manual side or roof ventilation 4, irrigation for optional: drip, fog and mist irrigation 5, other options: shade system...

Monday 21 January 2013

Quantité : 1000ton - Prix : 500usd/ton

Seamless And Welded Steel Pipe for Low- Temperature Service 1.Size: 10.3-508mm*1.2-25mm 2.Grade: Gr.1、Gr.6 3.Operative Standard：ASTM A333/333M、ASME A333/SA333M Localisation : No.9 Xiangfu Road, 410004 Hunan, Personne à contacter : Alinda Tong, 86 0731 88880000

Monday 21 January 2013

Quantité : 1000ton - Prix : 500usd/ton

Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service 1.Size: 168.3-1200mm*6-200mm 2.Grade: P1、P2、P5、P5b、P5c、P9、P11、P12、P21、P22、P23、 P91 3.Operative Standard: ASTM A335/ A335M、ASME SA335/ SA335M Localisation : No.9 Xiangfu Road, 410004 Hunan, Personne à contacter : Alinda Tong...

Monday 21 January 2013

Quantité : 1000ton - Prix : 500usd/ton

Carbon steel pipes for pressure pipeline service Size: ∮10.3-508mm*1.2-32mm Grade: STPG370、STPG410/STPT370、STPT410、STPT480 Operative Standard: JIS G3454、JIS G3456 Localisation : No.9 Xiangfu Road, 410004 Hunan, Personne à contacter : Alinda Tong, 86 0731 88880000

Wednesday 09 January 2013

Quantité : negotiate - Prix : negotiate

This is the professional lifting equipment for saloon car's maintenance and examining. It has the main characteristic of occupying small area, good security. It is also very simple to handle&working credibly. Especially for the full hydraulic pressure working system, it is suitable...

Monday 07 January 2013

Quantité : 1000 - Prix : ￥870

1. This kind of solar hot water heater depends on the natural circulation of water between the collector and the tank. 2. Water in the evacuated tubes is heated and rises naturally into the water tank, while the cold water in the tank flows down to the bottom of the evacuated tubes...

Thursday 03 January 2013

Quantité : 100000000p - Prix : USD$9-15

1 Up-market flat pipe carriage, spacious and comfortable 2 The pushed is reversal, easy for two-way pushing 3 Front-tray is detachable with function of placing feeding bottles 4 Three-position adjustable backrest easy for sitting and lying 5 Totally enclosed windproof canvas...

Thursday 03 January 2013

Quantité : 100000000p - Prix : USD$9-15

1 Up-market flat pipe carriage, spacious and comfortable 2 Three-position adjustable backrest sorber at the front wheel 6 Size of cartoont-tray is detachable with function of placing feeding bottles 4 Wish large basket at the back, and the cloth cover can be demounted and washed...

Thursday 20 December 2012

Quantité : 300set/mon - Prix : 3000USD

SS150 Standard Design Parameters SS150EL/F; SS150DEL/F Descriptions: Produced on requirement Effective capacity: 18000L/min The max pressure: 16bar Inlet: Flange DN150 PN16 Outlet: Flange connection Optional inlet : DN200 / ANSI6'' Rotation range: Horizontal: 340° Vertical...

Thursday 20 December 2012

Quantité : 200set/mon - Prix : 3500USD

1. Effective capacity: 2000L/min; 2400L/min 2. The max pressure: 16bar 3. Inlet: Flange DN50 PN16; DN65 PN16 4. Outlet: Screw thread 5. Optional inlet Flange: DN80 PN16/ANSI2''/ANSI½'' Localisation : Zhuhai City, 519060 Zhuhai, Personne à contacter : Robin Shen, 86 0756 6302052

Thursday 20 December 2012

Quantité : 300set/mon - Prix : 3000USD

SS300EL Double Pipe Monitor Standard Design Parameters SS300DEL/F Descriptions: Produced on requirement Effective capacity: 60000L/min The max pressure: 16bar Inlet: Flange DN300 PN16 Outlet: Flange connection Optional inlet flange: ANSI 12'' Rotation range: Horizontal: 340° Vertical...

Friday 07 December 2012

Quantité : 15-20 sets - Prix : USD 1500-2000 per se

We Need a Dryer Moisture content of biomass material is a key factor affecting the final quality of pellet. Experience tells us that if moisture content of raw material exceeds 16%, pellet quality will begin to suffer. So drying is a significant operation in pellet producing. There...

Friday 07 December 2012

Quantité : 15-20 sets - Prix : USD 1500-2000 per se

Pipe Dryer Introduction Pipe dryer, also known as flash dryer, is used for drying materials whose moisture contents is higher than 16%.The wet biomass material like sawdust is dispersed into a stream of heated air(or gas )which conveys it through a drying duct. The wet material...

Friday 07 December 2012

Quantité : 100000

flex sections What is it? * The components of the flexible tube are STS 304 Bellows, or other s/s Inner .Outer Braids and Caps. * This is connected to the exhaust pipe which is also connected to engine so that it can decrease the noise and vibration generated by engine. * Prevent...

Friday 07 December 2012

Quantité : 100000

Flex pipe What is it? * The components of the flexible tube are STS 304 Bellows, or other s/s Inner .Outer Braids and Caps. * This is connected to the exhaust pipe which is also connected to engine so that it can decrease the noise and vibration generated by engine. * Prevent the...

Friday 07 December 2012

Quantité : 100000

Flexible Pipes What is it? * The components of the flexible tube are STS 304 Bellows, or other s/s Inner .Outer Braids and Caps. * This is connected to the exhaust pipe which is also connected to engine so that it can decrease the noise and vibration generated by engine. * Prevent...

Friday 07 December 2012

Quantité : 100000

exhaust flexible pipe What is it? * The components of the flexible tube are STS 304 Bellows, or other s/s Inner .Outer Braids and Caps. * This is connected to the exhaust pipe which is also connected to engine so that it can decrease the noise and vibration generated by engine...

Thursday 06 December 2012

Quantité : one FCL - Prix : 0,56 €

Nous fabriquons des ferrures de meubles et d'accessoires et d'exportation à travers le monde depuis plusieurs années, avec la force de Tubes, Chaînes en aluminium, charnières, glissières à billes, ressorts à gaz, les jambes canapés, vaisselle etc crémaillère tubes: 1) artisanat raffiné...

Monday 03 December 2012

Quantité : 1 - Prix : negotiate

This is the professional lifting equipment for saloon car's maintenance and examining. It has the main characteristic of occupying small area, good security. It is also very simple to handle&working credibly. Especially for the full hydraulic pressure working system, it is suitable...

Monday 03 December 2012

Quantité : 1 - Prix : negotiate

Features: STRONG 1,5mm "internatonal standard" column steel plates made in Shanghai 2,8mm brace arm and 6mm internal sliding column, never deform 3,Wearable, Anti-High temperature, high strength oiliness macromolecule nylon slide block 4,Require no less than 150mm cement on the ground...

Saturday 01 December 2012

Quantité : 1 set - Prix : US $ 19,000-38,000/

Detailed Product Description Downspout roll forming machine Downpipe roll forming machine With CE approval 1 year warranty Rainspout Cold Roll Forming Machine Line TUT Machinery: Downpipe Forming Machine, Rainspout Formin inwater Downpipe Roll Forming Machine Features Specifications: 1)...

Friday 30 November 2012

Quantité : 15-20 sets - Prix : USD 1500-2000 per se

Ring Die Feed Pellet MillIntroduction Ring die pellet mill is an ideal pelletizing machine for high quality feed pellets.Before pelletizing, grains such as corn, wheat, rice and soybean, etc. need to be crushed into powder, Also they should be mixed thoroughly with a mixer since...

Thursday 29 November 2012

Quantité : 20000tons - Prix : 700usd/ton

Supply erw steel pipe 1. Outer diameter: 6-610mm 2. Wall thickness: 1.65-22mm, 3. Standard: API 5L, BS1387-85, JIS-G344, GB/T3091-2001 4. Material: Q195, Q235, Q345, S355J2H, ST37, ST52 5. Length: 0.5mtr-20mtr 6. End: square ends (straight cut, saw cut, and torch cut). or beveled...

Thursday 29 November 2012

Quantité : 20000ton - Prix : 700usd/ton

Supply seamless steel pipe 1. Outer Diameter: Hot finish: 400 – 1020mm, Cold drawn: 3.72 – 457mm 2. Wall Thickness: Hot finish: 16 – 200mm, Cold drawn: 1.7 – 22.5mm 3. Standard: ASTM A106, ASTM A53, ASTM A179, API5L GR.B, X42, X46, X52, 4. Length: Random Length, Fixed Length, SRL, DRL 5...

Thursday 29 November 2012

Quantité : 20000tons - Prix : 700usd/ton

Supply ssaw steel pipe 1. Outer diameter: 219mm-4064mm 2. Wall thickness: 3.2-40mm 3. Standard: GB/T3091-2001, BS1387-1985, DIN2458, API 5L, EN10217 4. Material: Q195, Q235, Q345, S355J2H, ST37, ST52 5. Length: 6mtr-18mtr 6. End: square ends (straight cut, saw cut, and torch cut)...

Thursday 29 November 2012

Quantité : 20000tons - Prix : 700usd/ton

Supply lsaw steel pipe 1. Outer diameter: 219mm-1820mm 2. Wall thickness: 5-50mm 3. Standard: GB/T3091-2001, BS1387-1985, DIN2458, API 5L, EN10217 4. Material: Q195, Q235, Q345, S355J2H, ST37, ST52 5. Length: 6mtr-18mtr 6. End: square ends (straight cut, saw cut, and torch cut)...