CARBIDE - 1369 Annonces

Mardi 19 mars 2024

Prix : 4-10000USD

The drill body of the steel body pdc bit is made of a whole piece of alloy steel by machining, and the cutting teeth are made by welding the composite piece on the tungsten carbide material tooth post, and then the cutting teeth are inlaid on the drill body, and the diameter-preserving...

Mardi 19 mars 2024

Prix : 4-10000USD

Polycrystalline Diamond Composite (PDC) merges thin layers of diamond with a cemented carbide base, blending diamond's wear resistance with carbide's impact resilience. Its perpetually sharp edge excels in oil and geological drilling within soft to medium-hard formations. Our products...

Mardi 19 mars 2024

Prix : 4-10000USD

Polycrystalline Diamond Composite (PDC) merges thin layers of diamond with a cemented carbide base, blending diamond's wear resistance with carbide's impact resilience. Its perpetually sharp edge excels in oil and geological drilling within soft to medium-hard formations. Our products...

Samedi 16 mars 2024

WH conductive graphite rod uses graphite block as raw material. After the processing of professional lathe equipment, it is made of different diameters and lengths. The graphite rod current graphite rod current density is a very important parameter, and you can contact us for more information...

Mercredi 13 mars 2024

Prix : 1-15USD

Our shredder hammer tips are bi-metallic composites having 700BHN hardness and available in various sizes and shapes. Our products are widely used in sugar or coal industry to do crushing and shredding performance, it has excellent impact and abrasion resistance properties so that...

Mercredi 13 mars 2024

Prix : 1-15USD

Ni Hard liners is a well-established white iron product alloyed with nickel and chromium to give significant abrasion and impact resistant properties. The structure of Ni-Hard forging components is composed of iron and chromium carbides, fixed in a matrix rendered martensitic by the...

Mardi 12 mars 2024

Non-standard Parts Standard parts are parts produced in accordance with national standards (GB), industry standards, or foreign standards, mainly for the convenience of maintenance and replacement, such as screws, keys, flanges, bearings, etc. are standard parts, which can be bought...

Samedi 02 mars 2024

Prix : $0.1-$9999

diode at high frequency are designed for use in applications where fast switching and low noise are critical. They operate at high frequencies, typically in the GHz range, and are commonly used for RF amplification, mixing, modulation, and demodulation. High Frequency Diode have low...

Vendredi 23 février 2024

Quantité : 5000-40,00 - Prix : USD10-USD2,000/pc

Rotary dresser grinding wheel with Silicon Carbide, Aluminum Oxide, Diamond, or CBN as grinding media lose their profile accuracy and cutting capacity after extended use. In order to restore the same, the grinding wheels have to be subjected to a dressing process. E-Grind provides...

Vendredi 23 février 2024

Quantité : 5000-40,00 - Prix : USD10-USD2,000/pc

E-Grind Abrasives developed diamond blade cut off wheel/CBN cut off blade for grinder to achieve more efficient and precision cutting. Our general bond can be used for both wet cutting and dry cutting. E-Grind Diamond cut off wheel for grinder is for cutting carbide, alloy material...

Vendredi 23 février 2024

Quantité : 5000-40,00 - Prix : USD10-USD2,000/pc

As one of the reputable abrasive grinding wheel manufacturers, E-Grind provides different all types of grinding wheel and Cubic Boron Nitride (CBN) grinding wheels, which are widely used in the woodworking industry, tool making, bearing, gear, mold and die, automobile, aerospace,...

Jeudi 22 février 2024

Green silicon carbide crystals have high purity and hardness. You can find the wide applications of green silicon carbide powder in machining hard alloy, metal and non-metallic materials. For instance, materials with hard and brittle characteristics like copper, brass, aluminum, magnesium...

Jeudi 22 février 2024

china garnet abrasive sand is made of garnet raw materials after crushing and screening. It is an island-like structure of aluminum (calcium) silicate, which has the characteristics of high hardness, strong grinding force, acid and alkali resistance, and high-temperature resistance...

Jeudi 22 février 2024

Boron carbide powder for sale is a kind of gray-black micropowder. It is an inorganic substance. The chemical form of boron carbide powder is B₄C. As one of the three hardest materials known (after diamond and cubic boron nitride), you caan find boron carbide powder uses widely in tank armor...

Jeudi 22 février 2024

Black silicon carbide is made of quartz sand and petroleum coke as the main raw materials, and is smelted at high temperature in a resistance furnace. It is black crystal, brittle and sharp, and has certain thermal and electrical conductivity. Black Silicon Carbide Powder Specifications...

Mercredi 21 février 2024

Fujistar ceramic abrasive containing selected materials has a better service life and grinding efficiency than traditional sandpaper, excellent dust removal and fast cutting performance, achieving higher production efficiency and fast break cycle time. Ceramic alumina sandpaper is...

Mercredi 21 février 2024

Ceramic grain is a new type of synthetic abrasive mineral. It is the most technologically advanced today, and it is widely used in the main processes related to the abrasive treatment of surfaces at the level of roughing and sanding extremely hard materials. A recent development in...

Mercredi 21 février 2024

Wet & dry flexible latex, the inherent flexibility allows contour of irregular surface. Usually used in wet sanding of paints, primes, surface of the automobiles, workpiece and precision instrument. Fujistar C35P is popular in Asia, Middle East, and Europe market. Do not hesitate...

Mercredi 21 février 2024

Fujistar's professional sponge abrasive product for automotive and electronic industry with high sanding efficiency and longer working lifetime. Covers a wide range of grits from medium to micro fine. Utimate sponge sanding product for treating surface of coating and metal. Once you've tried it...

Mardi 20 février 2024

As one of tungsten carbide scrap suppliers, we offer tungsten carbide scrap for sale at good wholesale prices. Tungsten carbide scrap materials can be roughly divided into the following three categories: (1) Waste products from tungsten processing: wire, coil, powder, sintered or...

Mardi 06 février 2024

Silicon Carbide Disc Brush The Silicon Carbide Brush is specially used to deal with the surface of the metal, such as cast iron, aluminum, steel. Metal parts produced by cutting or die casting will inevitably have burr or flanging. If the burrs are not removed, it will lead to the...

Mardi 06 février 2024

STATIONARY SEATS Rotary and stationary seal ring are the main components of a mechanical seal, which is a device that helps join systems or mechanisms together by preventing leakage. Stationary Seats (Mating Rings) are the non-rotating primary seal ring mounted in the gland plate...

Mardi 06 février 2024

Our single cartridge type seal is manufactured by balanced seal-face technology, helping to reduce energy comsumption whilst increasing reliability. Cartridge Mechanical Seal Types Cartridge type mechanical seal is assembled by the rotary ring, stationary ring, spring, secondary seal( o rings...)

Mardi 06 février 2024

Seal Spare Sleeve Mechanical Part In most pumps, the portion of the shaft that is under the sealing arrangement is covered with a shaft sleeve. The shaft sleeve is a sleeve of metal, usually bronze or stainless steel, that is designed to either slide or thread onto the shaft. It...

Mardi 06 février 2024

Prix : 0.5-3

Wet dry sandpaper is great for wet and dry use, bringing many conveniences to your operations. We supply wet dry sandpaper with a good variety of grits. Applications of Wet Dry Sandpaper The durable paper backing helps create consistent patterns that are easily buffed out. RIKEN RMC...

Mardi 06 février 2024

Prix : 0.5-3

Vulcanized fiber discs (commonly known as fiber discs) are round grinding wheels with a backing made of vulcanized fiber that is coated on one side with resin and abrasive grain. Abrasive fiber disc is fitted to suitable backing pads and used on angle grinders, predominantly for...

Lundi 05 février 2024

MAGNESIUM METAL Magnesium metal is one of the lightest metals in common use, with a density of 1.74g/cm3 and a specific stiffness (the ratio of stiffness to mass) close to aluminum and steel. At present, the application of magnesium metal for sale is mainly concentrated in aluminum production...

Lundi 05 février 2024

Diamond Wire Drawing Die Blanks E-Grind is one of professional wire drawing dies suppliers , we provide two series of PCD wire drawing die blanks : CDB Series and TDBY Series. 5 grades of grain size available: 3 microns, 5 microns, 10 microns, 25 microns and 50 microns. What is...

Lundi 05 février 2024

PDC (Polycrystalline Diamond Compact) Cutter E-Grind produces high-quality Polycrystalline diamond composite(PDC) and polycrystalline diamond compact cutters . Polycrystalline diamond composite(PDC) sheet is made of diamond particles and cemented carbide matrix sintered at 60,000 atmospheres...

Lundi 05 février 2024

E-Grind Superabrasives Product As one of the most professional abrasive powder suppliers in China, E-Grind offers a full range of superabrasives: Synthetic diamond, Cubid Boron Nitrid and related Solid products like CVD, TSP, PDC, PCD&PCBN, Diamond Wire-Draing Die blanks, for Drilling...