PNEUMATIC - 1610 Annonces

Vendredi 20 mai 2022

Adapter is one of the most important part of G.E.T system, especially the cast lip system. Either made by casting or forging, an adaptor installed between the lip and the tooth. It's nose and pocket support the main structure. WALKSON mainly focus on providing big size cast adaptor...

Mercredi 18 mai 2022

Prix : 5000-50000USD

Full Automatic Trimming High-precision Crosscutting Machine ( Four Frame ) This high precision cutting machine is suitable for cutting big rolling packaging materials such as office, paper-plastic, photo paper material, etc. Features of Full Automatic Trimming High-precision Crosscutting...

Mercredi 18 mai 2022

Prix : 5000-50000USD

Heat roll to roll lamination machine adopts a circling oil heating system equipped with a big diameter of drying roller and heat recycling system, which can enhance the heat efficiency greatly. Compared with the same type of machine in China, it can save energy up to 20%. Features...

Samedi 14 mai 2022

Quantité : 5000 sets - Prix : USD 15--USD 2200

Pigeon Medical air oxygen blender PN2000-SPD2 is doubling the output by adding an extra flow meter. Now the medical concentrated gas can be supplied to two newborns simultaneously. It brings a huge significant benefit on man power and cost saving. Besides that, adult version of flow...

Samedi 30 avril 2022

Quantité : 5000 sets - Prix : USD5,000.00-USD3,000

H beam machine consists of an assembling machine, front welding machine, turn-over device, back welding machine and the transmission conveyors. It is used to assemble the H-beam,180°turn-over and transmit, etc. The annual welding capacity is 8000 tons. The Max welding speed can...

Samedi 30 avril 2022

UTMOST eccentric plug valve has the outstanding advantages of simple structure, small volume, lightweight, strong flow capacity, wide adjustable range, wide service temperature range, small leakage, good stability, low valve cost, and long service life. The sealing form of the eccentric...

Samedi 30 avril 2022

In contrast with the concentric butterfly valve, a single offset butterfly valve whose stem axis deviates from the center of the disc and the center of the body at the same time, and the sealing pair is an oblique vertebra, is called an eccentric butterfly valve. As one of the professional...

Samedi 30 avril 2022

Cryogenic flow control valve is suitable for the adjustment of the medium (such as liquid oxygen, liquid nitrogen, etc.) under the low temperature and strong state of -60～-250℃. To ensure the accuracy of adjustment, a positioner must be used. Pneumatic low temperature is composed...

Samedi 30 avril 2022

Cryogenic Butterfly Valve The cryogenic valve has outstanding advantages such as reliable sealing, small opening, and closing torque, high low-temperature stability, and long service life. The actuator of this water butterfly valve adopts worm gear, pneumatic, electric, hydraulic...

Jeudi 21 avril 2022

Prix : 10-30USD

Wave Pool Machine for Sale and Surf Pool for Sale Features: Pneumatic Wave Pool is a kind of artificial simulation wave making. With the most realistic wave making effect, tourists have different experience. The wave pool equipment adopts wind pressure wave making, also known as wind...

Mardi 19 avril 2022

Prix : 1000-6000USD

Paper Angle Board Cutter This machine is used to re-cut paper protectors into smaller pieces. Feeding is by hand. Cutting is controlled by foot. Specifications of Paper Edge Protector Recutter 1) Model: SANCQ-1 2) Protector leg size: 25-120mm 3) Applicable protector length: 0-500mm 4) Min...

Samedi 16 avril 2022

Quantité : 1-100,000 - Prix : $1-$10

DF has an advanced CNC machining center, carving drilling machine, turning and milling machine, wire cutting, and other equipment. With these machines and experienced staff, we can repeat the positioning accuracy within the tolerance of 0.005mm, providing a strong guarantee for precision parts...

Vendredi 15 avril 2022

Quantité : 5000 ton/p - Prix : ＞0.8USD

Bright Annealed Tubes Description Annealed stainless steel tubing is a kind of high precision steel tube material after finishing or cold rolling. Due to the advantages of no oxide layer both inside and outside wall, no leakage under high pressure, high precision, high finish degree...

Mercredi 13 avril 2022

Prix : 1000-50000USD

Beading Machine for Sale Line 5/ line 7 pipe beading machines are used to make reinforced ribs in the duct area, and it can output 5 or 7 reinforced ribs at one time. Customer can customize multiple-line duct beader machine according to different requirements. Beading Machine Performance...

Mercredi 13 avril 2022

Prix : 1000-50000USD

It's mainly for uncoiling, leveling, beading, punching, locking, bilaterally angle steel or TDF flange forming. Because of its small space requirement and easy to install and operate, people also call it "small line 5". Auto Duct Production Line 4 Performance Features: The function...

Mercredi 13 avril 2022

Prix : 1000-50000USD

Portable angle steel flange production line is mainly for punching and cutting duct angle steel flange(30-50 angle steel). Cutter and punching die are both made of Japan SKH51, which are fast and accurate. The new design mold can complete the angle steel switching within 5 seconds...

Mardi 12 avril 2022

The sheet produced by this steel roll forming machine has high strength with big wavelength, and adheres well to concrete. Used on tall buildings, it not only saves steel mold sheet, but also reduces the weight of the storey. The common thickness for final products depends on different material...

Mardi 12 avril 2022

The rockwool sandwich panel production line is one continuous and automatic line that integrates mechanism, electrical controlling, hydraulic system and polyurethane chemical reaction technology. The rock wool sandwich panel machineadopts advanced international roll forming technology...

Mardi 12 avril 2022

Continuous pu sandwich panel machine china PIR Sandwich Panel Production Line, also called polyurethane sandwich panel manufacturing line machine, is an automatic production line, which is consisting of decoiler, film coating, pre-cutting, cutting equipment, roll forming system, preheating...

Mardi 12 avril 2022

H beam machine consists of an assembling machine, front welding machine, turn-over device, back welding machine and the transmission conveyors. It is used to assemble the H-beam,180°turn-over and transmit, etc. The annual welding capacity is 8000 tons. The Max welding speed can reach...

Mardi 12 avril 2022

Main structure features of EPS Panel Machine 1) This EPS sandwich panel making machine has the specification: nice appearance, low noise and high efficiency. 2) The EPS sandwich panel production line is welded by H-beam with shot blasting treatment on the surface, so the whole structure...

Mardi 12 avril 2022

Quantité : MOQ2000 - Prix : USD10-80/pc

Transtek Comfortable Touch Arm Blood Pressure Monitor TMB-986 (transtek tmb 986) IF design award, ESH Clinically Validated. Upper Arm Portable Blood Pressure Monitor. You can chose the portable blood pressure machine which fits you best, such as small portable blood pressure monitor...

Vendredi 08 avril 2022

Quantité : 10000 - Prix : 1-100

Introduction Of Print and Press-Apply Labeling System PLS540 PLS500 Series print and apply label applicator systems is unrivaled regarding stability. It uses Zebra ZE500 printing engine and this engine is one of the most professional printing engines in the world. The other structure...

Vendredi 08 avril 2022

Quantité : 10000 - Prix : 1-100

Introduction Of Print and Corner-Apply Labeling System PLS546 PLS546-Print and Corner-Apply Labeling System with a unique designed for corners. Rolling type labeling to match different arcs, right angles, use special sponge labeling head to protect packages. The other structure...

Jeudi 07 avril 2022

Dual Clutch Transmission System The truck uses compressed air to disengage and recombine the clutch to complete the start and shift gears. A concentric pneumatic dual clutch actuator, amt clutch actuator contains all elements connected to the gearbox system to disengage and reengage...

Jeudi 07 avril 2022

High Quality Car Parts Clutch separation bearing is a more important part of the car, if the maintenance is not good failure, not only will cause economic losses, and disassembly and assembly is quite troublesome, need to spend a lot of man-hours. Warranty Period considered for CPCA: 1 year...

Jeudi 07 avril 2022

Quantité : 1-100 - Prix : USD 50000-5000000

HVD-TCF-P is a commercial centrifuge device with mechanical unloading. All parts contact with the material and water, steam pipeline is made of stainless steel or corrosion resistant materials, to ensure the cleanliness of the separated products. Using pneumatic mechanical scraper discharge...

Jeudi 07 avril 2022

Quantité : 1-100 - Prix : USD 50000-5000000

HVD-AD-P series air dryer in pneumatic system unit is composed of an air heater, air filter, disintegrating disc, thrower, venturi pipe, air drying pipe, cyclone separator, induced draft fan, and other equipment. The rapid movement of the heat-carrying airflow is used to suspend the...

Dimanche 03 avril 2022

The horizontal peeler centrifuge manufactured by Saideli is with high production capacity and separation performance is good. The horizontal centrifuge machine is controlled by PLC and regulates the speed by frequency convertor, braking system applies dynamic braking and regenerative braking...

Mercredi 23 mars 2022

The main transmission of servo CNC turret punching machine is directly from drive servo punch press, which retains the advantage of a simple and reliable structure as mechanical transmission, it features high efficiency, energy saving, low noise, high accuracy, and can realize many...

Samedi 19 mars 2022

Quantité : 100 sets/ - Prix : USD 25000- 300000

Small tube laser cutting machine P1260A is a fully automatic machine, which combines the advantages of high precision and efficiency, and its high-end configurations are specially matched for normal size 10-120mm (0.4"- 4.72") tube processing. Metal tube laser cutter factory ...

Samedi 19 mars 2022

Quantité : 100 sets/ - Prix : USD 25000- 300000

Cost-effective fiber laser tube cutting machine P2060B, your start-off laser tube cutting machine. It is an affordable, practical, and versatile tube laser cutter machine. Multi-function P2060B laser tube cutting machine can not only cut round tubes, square tubes, elliptical tubes...

Samedi 19 mars 2022

Quantité : 100 sets/ - Prix : USD 25000- 300000

Golden Laser's 3D 5-axis laser cutting machine matched imported laser rotary swivel head, especially applicable for angular cutting, 3D-laser processing of components. This 3D laser cutting machine has a swivel range/stroke +/- 135° (+/- 160°), making seamless splicing easier! 3D...

Jeudi 17 mars 2022

In the process of food microbial detection, some samples may be solid, some need filling, and bacterial colonies test needs counting, etc. These operations require some small media preparation equipment. There are mainly four kinds of related instruments sold by ELEX: homogenizer...

Mercredi 16 mars 2022

Prix : 10-30USD

3 Way Flanged Ball Valve 3 Piece Flanged Ball Valve PP Ball Valve Flange End PVC Flanged Ball Valve Stainless Steel Flanged Ball Valves Ball Valve Flange Type Technical Specifications Features and Benefits of Ball Valve Flange Type The ball valve is a new type of valve and that is widely used...

Mercredi 16 mars 2022

Prix : 1000-6000USD

This is a high-end CNC drilling machine for panel furniture, which has the advantages of high processing efficiency and a high degree of automation. The servo mechanical press can realize six-side position processing and front and back groove processing at a time. TY10 series china...

Mercredi 16 mars 2022

Prix : 100USD

Adapter is one of the most important part of G.E.T system, especially the cast lip system. Either made by casting or forging, an adaptor installed between the lip and the tooth. It's nose and pocket support the main structure. WALKSON mainly focus on providing big size cast adaptors...

Mardi 15 mars 2022

Quantité : 10w - Prix : 1~100usd

Low pressure spray gun ZEGO provides high quality low pressure spray gun to help you to make finer and cleaner lines. The paint is released in the form of a spray. Simply to say, these low pressure spray guns use compressed air and are easy to paint. Professional advice and good service...

Samedi 12 mars 2022

Plastic machinery parts, to put it more precisely, are parts for plastic auxiliary equipment and central loading system. The machinery and system need to be used and maintained properly just like all other products. As time goes on, some parts may be susceptible to abrasion. These...

Samedi 12 mars 2022

As one of plastic mixer machine manufacturers, SOXI provides a wide range of plastic color mixer such as gravimetric blenders, volumetric dosers, horizontal mixers, and vertical color mixers. High speed mixer for pvc compounding is used for the precision proportioning of multi-types...

Jeudi 10 mars 2022

AX Series (AX-400, AX-500, AX-600, AX700, AX-800, AX-900) portable anaesthesia machine offers SIMV supports the smooth transition to anesthesia resuscitation, promotes resuscitation efficiency, and reduces lung injury caused by man-machine confrontation. CPAP/PSV supports postoperative...

Mercredi 09 mars 2022

As one of cut to length machine manufacturers, BOYA shear is often used in steel rolling production line. In the continuous rolling billet workshop or small section workshop, it is placed at the end of the flat rolling line to cut the rolled pieces into fixed length or only the...

Mardi 08 mars 2022

What Is a Dental Handpiece Dental handpiece burs is a tool commonly used in dental treatment for oral patients. Dental handpiece cleaning machine can be divided into high speed handpiece and low speed handpiece.The speed of high-speed handpiece reaches 350-420,000 revolutions per minute...

Mardi 08 mars 2022

BALL VALVES As one of pneumatic ball valve suppliers , MstnLand provides high performance ball valve products, including Trunnion mounted ball valve, Floating ball valve, Welded structure ball valve, Top entry ball valve, Wafer ball valve, Butt treaded socket welding ball valve...

Mardi 01 mars 2022

Model No.: CPF-1.2*1600,CPF-1.2*2000 Max Coil Width: 1600mm,2000mm Minumum Fold Duct: 140*140mm Thickness Range: 0.4-1.2mm(18-30Ga) Min.Order Quantity: 1 Set Supply Ability: 10 Sets per Month Port: GUANGZHOU PORT,SHENZHEN PORT Payment Terms: T/T,L/C Pneumatic Folding Machine Products...

Mercredi 23 février 2022

Transtek electronics, mainly producing home care medical supplies, has the total solution from connected healthcare devices, connectivity technology, APP to server. No matter where you are, Guangdong Transtek Medical Electronics can help your business seize the opportunities of...

Mercredi 23 février 2022

Prix : 100USD

CIXI KAIGE Auto Parts Co, Ltd is located in the beautiful Hangzhou BayBridge Nancangtian Industrial Park, is a car accessories company committed to the research and development and production of hydraulic clutch bearing and clutch pneumatic actuators. KAIGE offer many high quality...

Mercredi 23 février 2022

Prix : 100USD

CIXI KAIGE Auto Parts Co, Ltd is located in the beautiful Hangzhou BayBridge Nancangtian Industrial Park, is a car accessories company committed to the research and development and production of hydraulic clutch bearing and clutch pneumatic actuators. There are suzuki clutch bearing...

Mercredi 23 février 2022

Prix : 100USD

CIXI KAIGE Auto Parts Co, Ltd is located in the beautiful Hangzhou BayBridge Nancangtian Industrial Park, is a car accessories company committed to the research and development and production of hydraulic clutch bearing and clutch pneumatic actuators. Our company is specialized in...

Mercredi 23 février 2022

Prix : 100USD

CIXI KAIGE Auto Parts Co, Ltd is located in the beautiful Hangzhou BayBridge Nancangtian Industrial Park, is a car accessories company committed to the research and development and production of hydraulic clutch bearing and clutch pneumatic actuators. OEM Numbering of ISUZU CHB010...

Mercredi 23 février 2022

Prix : 100USD

KAIGE auto parts products cover the United States, Europe, Japan and Korea, and its products are used in most commercial vehicles and passenger vehicles. All products of the car accessories company have passed the air tightness test 100%, and all products have passed the life test...

Mercredi 23 février 2022

Prix : 100USD

KAIGE auto parts products cover the United States, Europe, Japan and Korea, and its products are used in most commercial vehicles and passenger vehicles. All products of the car accessories company have passed the air tightness test 100%, and all products have passed the life test...

Mardi 22 février 2022

paper honeycomb manufacturers Honeycomb paper making machine Honeycomb paper making machine includes a complete production line, which can be divided into two parts: honeycomb paper core line and honeycomb paperboard lamination line. The former is used to produce a honeycomb paper core...

Mardi 22 février 2022

This catalog includes the post-processing machines of the paper edge protector. They are paper edge protector recutter and paper edge protector die notching machine. Various shapes of paper edge protector can be produced by these paper board making machines to meet the demand of customers...

Dimanche 20 février 2022

Quantité : 20,000 ton - Prix : $850~$2000 / ton

Investment casting, also called the lost-wax casting process, is actually an ancient metal casting technology with a history of over 6,000 years. It generally refers to the mold made by meltable materials (such as wax, plastic, etc.) in very accurate dimensions. The mold is applied...

Samedi 19 février 2022

Prix : 89 900,00 €

Our Craft Equipment, for restaurants, commercial and industrial breweries which consist of the industrial wort brew machine and a fully equipped set of the professional fermentation tanks with a capacity from 5HL up to 100HL. It's a medium-size and big-size craft brewery intended...

Jeudi 20 janvier 2022

High Dream is specialized in manufacturing loss in weight feeder. High Dream loss in weight screw feeder includes: Twin Screw Loss-in-Weight Feeder, Single Screw Loss-in-weight Feeder, Vibratory Loss-in-weight Feeder, Liquid Type Feeder, etc. Loss-in-Weight Feeder Types Twin Screw...

Samedi 25 décembre 2021

Prix : 1000-6000USD

Ruian Loyal Machinery Co, Ltd., is located in Wenzhou, is one of the most professional enterprises of manufacturer and developer in the field of china slitting machine, printing machine, sheeting machine and mask machine. This machine is suitable for the slitting of straw paper, aluminum foil...

Vendredi 24 décembre 2021

Yiheda automation is one of the best industrial assembly automation companies, as an expert custom automation company, specializes in designing and manufacturing the custom automation solution to customers. Machine introduction of Turntable 90 degree linkage high-speed manipulator...

Jeudi 23 décembre 2021

HBTE pneumatic shield box is made by sheet metal process, which has good shielded sealing and strong structure.It is the switch of pneumatic control box door, which can improve test efficiency and reduce operator fatigue.It supports RS232 serial communication command control and remote...

Mardi 21 décembre 2021

Quantité : 1-100 - Prix : USD 50000-5000000

Hongvadar is advanced in many areas, such as being the corn starch production plant and small scale tomato processing plant. HVD-TCF-P is an automated upper suspension centrifuge device with mechanical unloading. All parts contact with the material and water, steam pipeline is made...

Samedi 18 décembre 2021

Quantité : 40 pieces - Prix : $42,000-357,000

The truck-mounted open-air split pneumatic drill rig produced by TAIYE uses compressed air as the power, mechanical direct control system, no wires and engine connection, the structure is very simple, and the whole vehicle is very convenient to repair and maintain. Know More about...

Samedi 18 décembre 2021

Quantité : 40 pieces - Prix : $42,000-357,000

As a professional air compressor supplier, we can select the drilling air compressor model and brand corresponding to the volumetric flow and pressure according to the drilling hole diameter, drilling hole depth, etc. These high-quality air compressor for drilling rig for drilling...

Samedi 18 décembre 2021

Quantité : 40 pieces - Prix : $42,000-357,000

TAIYE provides types of hammers, such as the pneumatic hammer, the rock hammer and the hole DTH hammer (down the hole hammer) for all rock drilling applications, including but not limited to foundation and geotechnical drilling, blasthole drilling in quarries and mines, water and...

Jeudi 16 décembre 2021

Prix : 1000-6000USD

QINGGONG MACHINERY pro blasting supplies a variety of shot blasting machines to meet your different needs. According to the industry, different types of shot blasting machines can be chosen from. To learn more, you may see the “Industry” applications. Click “Buy Shot Blasting Machine”...

Jeudi 16 décembre 2021

Prix : 1000-6000USD

QINGGONG MACHINERY shot blasting machine offers you an effective solution to deal with the surface of the workpieces, including remove the contaminant on the surface, cleaning and roughen a smooth surface before applying a primer or coating to the workpiece. More specifically, the...

Vendredi 10 décembre 2021

In the heavy industrial machinery industry in China, BLKMA is the most authoritative modern enterprise, which participated in the national Chinese pipeline machinery industry standards. In recent years, it maintains a rapid growth in sales revenue and enterprise scale according to...

Vendredi 10 décembre 2021

In the heavy industrial machinery industry in China, BLKMA is the most authoritative modern enterprise, which participated in the national Chinese pipeline machinery industry standards. In recent years, it maintains a rapid growth in sales revenue and enterprise scale according to...

Vendredi 10 décembre 2021

In the heavy industrial machinery industry in China, BLKMA is the most authoritative modern enterprise, which participated in the national Chinese pipeline machinery industry standards. In recent years, it maintains a rapid growth in sales revenue and enterprise scale according to...

Vendredi 10 décembre 2021

In the heavy industrial machinery industry in China, BLKMA is the most authoritative modern enterprise, which participated in the national Chinese pipeline machinery industry standards. In recent years, it maintains a rapid growth in sales revenue and enterprise scale according to...

Vendredi 10 décembre 2021

In the heavy industrial machinery industry in China, BLKMA is the most authoritative modern enterprise, which participated in the national Chinese pipeline machinery industry standards. In recent years, it maintains a rapid growth in sales revenue and enterprise scale according to...

Vendredi 10 décembre 2021

Performance Characteristics of Dispensing Pump 1. Small size, light design, easy to clean and move. - According to the operation needs, the nozzle can be installed freely left and right. 3. The pneumatic type liquid feeding method is adopted, and the culture media dispenser speed...

Mardi 30 novembre 2021

Types of Tube Brushes Tube brush is a very efficient, convenient and cost-effective tool, which is widely used in food, manufacturing and other industries. Tube brush can be easily installed on pneumatic tools, machine tools, bench drills, or can be used directly by hand. According...

Mardi 30 novembre 2021

Prix : 3 users after paymen

The entire SMT production line generally requires conventional SMT pick and place parts: nozzles, feeders, etc. For all products in the warranty, our company provides free replacement of accessories. For all out-of-warranty machines, especially when the product has been used for a long time...

Samedi 27 novembre 2021

Choke Manifold control and implementation of oil and gas pressure control technology. In case that the BOP is off, the pressure at the bottom of well shall be kept higher than formation pressure through controlling casing pressure with choke valve on-off. Additionally, soft shut in...

Samedi 27 novembre 2021

Quantité : 10000 pcs/ - Prix : 10-150USD

Compared with FEEJOY point level switch, the widely used vibration fork level switch needs to ensure that a considerable part of it is inserted into the material to be measured. Because viscous materials are easy to stick to these forks, it often causes measurement errors. Coarse...

Samedi 27 novembre 2021

Quantité : 10000 pcs/ - Prix : 10-150USD

There are many kinds of pneumatic vibration equipment, such as ball vibrators, roller vibrators, air vibrators, pneumatic turbine vibrators, etc. The power of different vibrators is different. Other important factors are: cost, noise and air system consumption, according to your own...

Samedi 20 novembre 2021

TJK is a leading manufacturer for steel reinforcement bending machines: Sitrrup bending, Cut & Bend, Mesh Welding, Cage Welding, Lattice Girder and Tunnel Lining, Tunnel segment machines etc. Manual Stirrup Bender WG12F has the particular patented straightening system, constituted...

Samedi 20 novembre 2021

TJK is a leading manufacturer for steel reinforcement bending machines: Sitrrup bending, Cut & Bend, Mesh Welding, Cage Welding, Lattice Girder and Tunnel Lining, Tunnel segment machines etc. Stirrup Bender WG12D-5 has the particular patented stirrup straighteners system, constituted...

Samedi 20 novembre 2021

TJK is a leading manufacturer for steel reinforcement bending machines: Sitrrup bending, Cut & Bend, Mesh Welding, Cage Welding, Lattice Girder and Tunnel Lining, Tunnel segment machines etc. Stirrup Bender WG12D-4(stirrup rebar) has the particular patented straightening system...

Jeudi 18 novembre 2021

Prix : 4000-70000 USD

High Dream is specialized in manufacturing loss in weight feeder. High Dream loss in weight screw feeder includes: Twin Screw Loss-in-Weight Feeder, Single Screw Loss-in-weight Feeder, Vibratory Loss-in-weight Feeder, Liquid Type Feeder, etc. Loss-in-Weight Feeder Working Principle...

Samedi 13 novembre 2021

Huayi Seal is a Manufacturer who is focused on the research of fluid &Pneumatic Seal Technology & Production of Rubber Seals. If you have any concerns,please feel free to contact me,my mobile phone and wechat NO. are both 18017903472. You can also visit our website https://en...

Mardi 09 novembre 2021

Prix : 1000-6000USD

Honeycomb paper machine includes a complete production line, which can be divided into two parts: honeycomb paper core line and honeycomb paperboard lamination line. The former is used to produce a honeycomb paper core, and the latter is a honeycomb paperboard lamination line that...

Mardi 09 novembre 2021

Prix : 1000-6000USD

This catalog includes the post-processing machines of the paper edge protector. They are paper edge protector recutter and paper edge protector die notching machine. Various shapes of paper edge protector can be produced by these machines to meet the demand of customers. One of them...

Jeudi 04 novembre 2021

PVC spray hose is composed of double polyester and three PVC layers, so can work under high working pressure. It is light, wearable, corrosion resistance, anti-aging and anti-bending PVC spray hose pipe for sale is widely used in pneumatics, compressor, engine accessories, civil engineering...

Jeudi 04 novembre 2021

Characteristics: light –weight, wear resistance, erosion resistance, good flexibility Working Temperature: -5°C-65°C PVC air tube are made of tough PVC materials and high tensile polyester reinforcement,it can work under very high pressure. Apply to: some pneumatic tools, pneumatic...

Mardi 02 novembre 2021

ANBIT28 airleg mining drill is also called air leg rock drill which is developed by the company with the advantages of various leg drill. Adopting the latest design technology of rock drill, it is a kind of high efficiency, energy saving, and environmental protection equipment. Product...

Samedi 30 octobre 2021

In the process of food microbial detection, some samples may be solid, some need filling, and bacterial colonies test needs counting, etc. These operations require some small sample preparation equipment. There are mainly four kinds of related instruments sold by ELEX: homogenizer...

Samedi 30 octobre 2021

Air blasting room or Air blasting cabinet with pneumatic media reclaim system – An economical alternative, vacuum reclaim systems utilize cyclone separators to recover usable media to the automatic blasting machine, while dust and broken-down media are drawn out into the dust collection system...

Samedi 30 octobre 2021

Similar Products Heat Exchanger Tubes 100% PMI test, 100% Hydraulic test, 100% inner cleaned by sponge, 100% Dimension test, 100% Surface test. Special Shaped Tubes Huashang stainless steel tube size, pipe finishing and material as per request of the customer. Hexagon Steel Tubing...

Samedi 30 octobre 2021

Prix : 10-30USD

Pipe Fittings Application in the Manufacturing & Distribution Industry Pipeline transportation is a method of transporting liquid and gas materials over a long distance using pipelines as a means of transportation. It is a transportation mode that transports petroleum, coal and...

Vendredi 29 octobre 2021

PVC spray hose is composed of double polyester and three PVC layers, so can work under high working pressure. It is light, wearable, corrosion resistance, anti-aging and anti-bending PVC spray hose pipe for sale is widely used in pneumatics, compressor, engine accessories, civil engineering...

Vendredi 29 octobre 2021

Characteristics: light –weight, wear resistance, erosion resistance, good flexibility Working Temperature: -5°C-65°C PVC air tube are made of tough PVC materials and high tensile polyester reinforcement,it can work under very high pressure. Apply to: some pneumatic tools, pneumatic...

Vendredi 29 octobre 2021

Quantité : 100 sets / - Prix : USD2206-USD73529

USE: It is mainly suitable for slitting all kinds of thermal paper, TTR, fax paper, cash register, computer bill, medical record paper, pos printing paper, ATM reel paper, film and self adhesive paper e... Features of HC-T700/900/1100A Thermal Paper Slitting Rewinding Machine USE...

Vendredi 29 octobre 2021

Quantité : 100 sets / - Prix : USD2206-USD73529

This machine is suitable for the slitting of straw paper, aluminum foil, copper semiconductor, PET CCL, BOPP, PET, CPP, PE, PVC, film, paper, etc. Features of HC-C650/1300/1600B Surface Type Slitting Machine Use This machine is suitable for the slitting of straw paper, aluminum foil...

Vendredi 29 octobre 2021

Prix : 5000-50000USD

The machine is overall steel-welded and gate-type with chain drive. The motor has its own brake, which means no power consuming when not shearing. It's suitable for processing sheet metal less than 3mm in thickness. Electric Shearing Machine Performance Feature The electric shearing...

Vendredi 29 octobre 2021

Prix : 5000-50000USD

BLKMA is a company from China. Founded in 1994, it is located in Ma'anshan, Anhui Province, China. It is only 26 kilometers away from Nanjing Lukou International Airport. It has the developed transportation system so that our customers can visit at any time. We are one of the leading...

Jeudi 28 octobre 2021

Prix : 1000-6000USD

Golden Laser laser tube cutting equipment adopts laser tube cutting systems for 2D and 3D laser cutting, suitable for and profiles. From 10 mm to 350 mm (4" to 14") in diameter and up to 12 m (40') in length. As one of the professional tube laser cutting machine manufacturers in China...

Jeudi 28 octobre 2021

Prix : 1000-6000USD

Golden Laser laser tube cutting equipment adopts laser tube cutting systems for 2D and 3D laser cutting, suitable for and profiles. From 10 mm to 350 mm (4" to 14") in diameter and up to 12 m (40') in length. As one of the professional tube laser cutting machine manufacturers in China...

Dimanche 10 octobre 2021

Types of Clutch Discs When purchasing clutch plates for car, you must pay attention to the quality of the clutch plate clutch plate. There should be no clutch plates with deformation, warpage and poor tightness on the surface, which will not only cause the clutch to slip and stop production...

Samedi 25 septembre 2021

The pressure transmitter has the application used in pressure measurement of media such as liquids, air, and vapor. Accuracy and stability in the monitoring will ensure a reliable and efficient operation. Pressure Transmitter with LCD The pressure transducer with the display is a...

Samedi 25 septembre 2021

A pressure switch is a control device that runs a switch on and a switch-off action when a preset pressure value occurs. Pressure switches are mainly used as the flow controller for fluid or gas in applications such as HVAC systems, water pumps, boilers, gas tanks. Air Compressor...

Vendredi 17 septembre 2021

For new run flat tyres/tires, the unique structure of the sidewall provides the tyres to become heat resistant, it aims to minimize the risk of being blowout and is environmentally friendly. Even under the condition of zero pressure, the enhancing tire bead can ensure the safe match...

Jeudi 09 septembre 2021

Quantité : 1000 - Prix : 881.79$(FOB)

APS tube Pneumatic Cleaning (Tangshan) Co., Ltd. Est une société spécialisée dans la production d'équipements de nettoyage pneumatique PSI. PSI produit, vend et distribue une gamme révolutionnaire d'outils pneumatiques pour le nettoyage de tuyaux, de tuyaux et de tuyaux de 3mm à 100mm...

Mardi 07 septembre 2021

Quantité : 100000 - Prix : 1~100

Low pressure spray gun ZEGO provides high quality low pressure spray gun to help you to make finer and cleaner lines. The paint is released in the form of a spray. Simply to say, these low pressure paint gun use compressed air and are easy to paint. Professional advice and good service...

Mardi 31 août 2021

Equipment Description of High Frequency PVC Door Curtain Welding Machine UNIFY's consistent superior quality has been upheld. The width of fully automatic magnetic curtain heat sealing equipment generally ranges from 150mm to 750mm, which can be adjusted and customized. The whole...

Mercredi 25 août 2021

Quantité : 500000tons - Prix : $5-$200000

Purpose of marine standpipe manifold in the process of blowout control and implementation of oil and gas pressure control technology, it can be used to prevent blowout and protect wellhead. To kill the well (inject fall slurry compulsively); To avoid the risk of fire (inject pure...)

Jeudi 19 août 2021

Tunnel type shot blasting machines also can be named hook pass-through type shot blaster. This type of cleaning machine is suitable for the surface cleaning of large and medium-sized castings, forgings and structural parts in casting, construction, chemical, motor, machine tool and...

Samedi 14 août 2021

Prix : USD 0.5-3

FV is one special flexible film made by RIKEN RMC. Taking advantage of special maker line, RIKEN RMC has designed this new item. Application of Imperial Diamond Lapping Film: FV film is a flexible product used in the field of ultra-fine sanding, with a stearated coating to effectively...

Samedi 14 août 2021

Prix : USD0.5-3

We are a abrasives factory choose high-performance , so in edges cutting, deburring and surfaces sanding, polishing you will have excellent performance. If you want more information about china abrasives, please feel free and contact us. FF 3m micro abrasive film is one very soft...

Samedi 14 août 2021

Prix : 1000-6000USD

Weidouli Control Ball Valves contain an On-off control ball valve(O type ball design) and a Control Segment ball valve(V type ball design). The on-off control ball valve is evolved from plug valve, the opening and closing parts is a ball, using the ball goes around the axis of the...

Samedi 07 août 2021

Anhui BLKMA heavy industry machinery Co.,ltd. is located in the center of China's machine tool industry, Ma'anShan BoWang District Dongcheng Industrial Park. It is very convenient only takes 20 mins to Nanjing Lukou International airport and connected with Jiangsu, Zhejiang and Shanghai...

Samedi 07 août 2021

Anhui BLKMA heavy industry machinery Co.,ltd. is located in the center of China's machine tool industry, Ma'anShan BoWang District Dongcheng Industrial Park. It is very convenient only takes 20 mins to Nanjing Lukou International airport and connected with Jiangsu, Zhejiang and Shanghai...

Samedi 07 août 2021

Anhui BLKMA heavy industry machinery Co.,ltd. is located in the center of China's machine tool industry, Ma'anShan BoWang District Dongcheng Industrial Park. It is very convenient only takes 20 mins to Nanjing Lukou International airport and connected with Jiangsu, Zhejiang and Shanghai...

Jeudi 29 juillet 2021

PLS500 Series print and apply labeling systems is unrivaled regarding stability. It uses Zebra ZE500 printing engine and this engine is one of the most professional printing engines in the world. The other structure used the most reliable Festo pneumatic part. With the design ...

Jeudi 29 juillet 2021

PLS546-Print And Apply Labeling Systems with a unique designed for corners. Rolling type labeling to match different arcs, right angles, use special sponge labeling head to protect packages. The other structure used the most reliable Festo pneumatic part. With the design & development...

Jeudi 29 juillet 2021

Quantité : More than - Prix : More than 300,000

Conveyors are used for product conveying. There are different types of the conveyor, which can be used for conveying various kinds of products. Flexible conveyor is a device designed to transport raw materials, semi-finished products or products in order to improve the efficiency...

Lundi 26 juillet 2021

Quantité : 100000 met - Prix : USD2.8/M

Size: Width * Thickness Please advise the Width * Thickness sizes and the quatity you need. Thank you. Description Material: phenolic resin with cloth Wear ring are mould and like wear tape used in hydraulic and pneumatic cylinders to prevent metal contact between movable parts. Advantage 1...

Samedi 10 juillet 2021

Quantité : 1 - Prix : 1,00 €

LN81 Series Single Seat Globe Control Valve LN81 series are single-seat LN8 series pressure imbalance structure products, one of two basic guide plunger valve core, the floating sleeve compression type, from the seat structure, modular design, the flow capacity is big, high controlling precision...

Samedi 10 juillet 2021

Articulated forklift rough terrain and Articulated Forklift CPCY-30 Technical Specification： Rated Load(kg) 3000 Max.unloading Height(mm) 3000 Overall Weight（kg） 3500-3800 Max.Grade Ability 16°≤30° Drive mode Four-wheel drive Wheel tires 20.5-16 pneumatic tyre Ground...

Vendredi 09 juillet 2021

Quantité : 40 pieces - Prix : $42,000-357,000

Xuanhua Taiye Drilling Machinery CO, LTD. is a professional rig company. We provide Rotary Blasthole Drill Rig, Full Hydraulic Surface Down-The-Hole (DTH) Drilling Rig, drilling rig china and so on. Want to know more? Please contact us. The truck-mounted open-air split pneumatic crawler...

Vendredi 09 juillet 2021

Quantité : 40 pieces - Prix : $42,000-357,000

Xuanhua Taiye Drilling Machinery CO, LTD. is one of professional drilling equipment manufacturers. We provide Rotary Blasthole Drill Rig, Full Hydraulic Surface Down-The-Hole (DTH) Drilling Rig, drilling rig equipment and so on. Want to know more? Please contact us. TAIYE provides...

Vendredi 09 juillet 2021

Quantité : 40 pieces - Prix : $42,000-357,000

Xuanhua Taiye Drilling Machinery CO, LTD. is a professional rig company. We provide Rotary Blasthole Drill Rig, Full Hydraulic Surface Down-The-Hole (DTH) Drilling Rig, drilling rig equipment and so on. Want to know more? Please contact us. Our full-hydraulic open-air top surface...

Jeudi 17 juin 2021

Beading machine includes 5 lines beading machine (≤1500mm sheet width) and 7 lines beading machine (2000 mm sheet width). With the grooving function, this beading machine usually is used to make HVAC air ventilation duct with material rack, electric shearing machine, Pittsburgh lock...

Jeudi 17 juin 2021

It's mainly for TDF / angle steel / C-shaped flange forming with daily processing capability of 1000-2500 square meters. Only with inputting dimensions in duct, production line can automatically complete uncoiling, leveling, beading, punching, shearing, locking, forming TDF / angle...

Jeudi 17 juin 2021

It features low making cost and high installing efficiency, convenient for standard and batches of production. It is suitable for making rectangle wind pipe with big section. TDF Flange Forming Machine Performance Feature: We can divide TDF flange forming machine into two types...

Jeudi 17 juin 2021

Small Electric Shearing Machine Performance Feature: The small electric shearing machine is with reduction motor and no gears structure so that the machine requires less maintenance. This small guillotine shearing machine is mainly used to cut less than 2 mm thick sheet metal. The...

Jeudi 17 juin 2021

Riken and RMC, velcro sanding discs suppliers, velcro backed sanding discs or velcro backed sanding pads (commonly known as bulk hook and loop sanding discs) & PSA disc are made of abrasive paper, abrasive cloth, abrasive film and so on, bonded with Velcro, paper or film by resin...

Mercredi 16 juin 2021

We provide 5g nr module, 5g nr n77, cbrs 5g nr, mmwave ghz,etc. We also have reverberation chamber, antenna measurement system, programmable rf attenuator, rf phase shifter device,etc. HBTE pneumatic shield box is made by sheet metal process, which has good shielding sealing and strong structure...

Samedi 12 juin 2021

Prix : 1000-6000USD

Equipment Description of Automated Travelling Head High-Frequency Welding Machine Automated traveling head high-frequency welding machine, specializing in the production of architectural stretch film structure, tents, truck tarpaulins, PVC oil tanks, large advertising clothes, fast doors...

Samedi 12 juin 2021

Prix : 1000-6000USD

Equipment Description of High Disposition Automotive Sunvisor Welder Our company's production of high-frequency welding machines for sun visors of cars introduce advanced technology and major components, complete product range, stable quality. It can also be customized according to...

Samedi 12 juin 2021

Name: Electric Train Ride Location: FuYang,AnHui Province,China DESCRIPTION OF ELECTRIC TRAIN RIDE Electric Train Ride is a mature and long-lived amusement equipment in our company. With a locomotive and several carriages, the Electric Train Ride is widely used in parks, major scenic spots...

Vendredi 11 juin 2021

Quantité : 500000PCS - Prix : 0.2USD~8000USD

Performance Characteristics of Dispensing Pump 1. Small size, light design, easy to clean and move. 2. According to the operation needs, the nozzle can be installed freely left and right. 3. The pneumatic type liquid feeding method is adopted, and the dispensing speed is increased...

Mercredi 02 juin 2021

Prix : 1000-6000USD

Guangdong High Dream Intellectualized Machinery co., ltd. is a fast, accurate and reliable weighing machine, used in packing both food and non-food products. Highdream has an extensive range of automatic multihead weigher suited to many food and non-food applications.we also provide...

Mercredi 26 mai 2021

Shenzhen MICNO Electric Co, Ltd. has been a public company of NEEQ in China with stock code 839477, which specializes in R&D, manufacture, sale and service of AC drive/VFD/VSD, Solar pumping inverter and other industrial automation products. Based in the field of industrial automation...

Samedi 15 mai 2021

Prix : 1000-6000USD

Stirrup Bender WG12D-4(stirrup rebar) has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted. Stirrup Bender WG12D-4 VIDEO Features of Stirrup Bender WG12D-4 Pure electric CNC stirrup bending machine...

Mardi 11 mai 2021

Prix : 100USD

Description of Wedge Gate Valve: ZECO wedge gate valve is one of the gate valve types. Wedge gate valves are named because the two sealing surfaces resemble wedges in the body. In general, the two wedge gate valve sealing surface and the Angle of the vertical center line of 2 ° 52 '...

Mardi 11 mai 2021

Prix : 100USD

Description of Wcb Gate Valve: ZECO WCB gate valve design reference API 600. WCB gate valves meet ASME B16.10 face to face dimensions. Pipe flanges are surface treated periodically and drilled to a 0.062” (1.5mm) raised surface in accordance with ASME B16.5. Pipe flange raised surface...

Mardi 11 mai 2021

Prix : 100USD

ZECO wafer check valve is simple in design because the wafer connection is named and consists of body, disc, spring and shaft pin components. Due to the short closing stroke of the wafer check valve and the quick closing by the spring, the impact on the water hammer can be significantly reduced...

Mardi 11 mai 2021

Prix : 100USD

Description of Triple Offset Butterfly Valve: ZECO triple offset butterfly valve adopts three-eccentric structure, which increases angle eccentricity in time on the basis of double offset butterfly valve with metal to metal seal. Angular eccentricity means that the conical axis of...

Mardi 11 mai 2021

Prix : 100USD

Description of Top Entry Ball Valve: As one of the leading top entry ball valve manufacturer, ZECO top entry ball valve is widely used in oil and natural gas pipelines. Top entry ball valve and side entry ball valve are also divided into floating structure and trunnion mounted structure...

Mardi 11 mai 2021

Prix : 100USD

ZECO is a professional swing check valve manufacturer. Swing check valves are API 6D products. Check Valve is automatically prevented fluid backflow valve, disc of the check valve is opened by fluid force, then fluid flows from the import side to export side. When the import side...

Mardi 11 mai 2021

Prix : 100USD

Description of Sw Gate Valve: ZECO is a well-known SW gate valve manufacturer and a long-term supplier to global industrial companies and oil stockists. When the ZECO SW gate valve is fully opened, the sealing surface of the gate has little contact with the medium and is less corroded...

Mardi 11 mai 2021

Prix : 100USD

Description of Stainless Steel Gate Valve: ZECO stainless steel gate valve is basically used for pipelines with corrosive media. For any kind of stainless steel material, the ability to resist medium corrosion is relatively limited, and is affected by many external factors, such as temperature...

Jeudi 06 mai 2021

TRONÇONNEUSE BI-LAME POUR CADRES BREVETTI MOTTA OCCASION Tronçonneuse double lame Brevetti Motta Dimentions maxi de coupe 40 mm dans la largeur – 80 mm dans la hauteur Type : electro-pneumatique Voltage: 400V 50Hz - trifase • 2 lames HM d. 300 mm • 2 barres de soutien • Filtre air...

Lundi 26 avril 2021

Quantité : 50 units p - Prix : 10,000-500,000

Explore More HF Industrial Belt Welders Products Industrial Belt Baffle Skirt High Frequency Welder Product DescriptionUsed for industrial belt skirt and belt baffles welding , welding industrial conveyor belt conveyor bel, joint, cutting, slitting, conducting bar, package edge...

Lundi 26 avril 2021

Quantité : 50 units p - Prix : 10,000-500,000

Explore More HF Welders Products Flexible Organ Shield Welding Machine can be used for high-frequency thermal bonding, embossing: inflatable toys, Equipment Description of PVC Fabric Welding Machine UNIFY's consistent superior quality has been upheld. The width of fully automatic...

Lundi 26 avril 2021

The electric smt feeders is mainly suitable for the Trosntol A1 automatic pick and place machine. This kind of pick and place feeder only needs electricity to feed, which is more stable than the traditional pneumatic feeder. It makes the placement effect preciser. It is mainly used in type ...

Mardi 20 avril 2021

Cailong is an innovative high-tech enterprise in Dongguan offering CNC machining services to customers with its professional and exquisite technology. HomeCapabilitiesCNC Machining Service Cailong has more than 20 advanced CNC processing equipment from Japan, South Korea and a group...

Vendredi 16 avril 2021

High Dream is specialized in manufacturing loss in weight feeder. High Dream loss in weight screw feeder includes: Twin Screw Loss-in-Weight Feeder, Single Screw Loss-in-weight Feeder, Vibratory Loss-in-weight Feeder, Liquid Type Feeder, etc. Loss-in-Weight Feeder Types Twin Screw...