MANUFACTURES - 6483 Annonces

Tuesday 15 March 2022

Quantité : 100000TON - Prix : 2300USD/TON-3000USD/

6061 Aluminum Sheet 6061 aluminum sheet is a high-quality alloy product produced by heat treatment and pre-stretching. Although its strength cannot be compared with 2000 series alloy or 7000 alloy series, the composition of 6061 aluminum alloy is mainly Mg and Si, so 6061 aluminum...

Tuesday 15 March 2022

Phthalic Anhydride Meaning Phthalic anhydride is an organic compound, C8H4O3, which is a circular anhydride formed by the dehydration of phthalic acid molecules. Phthalic anhydride is a white solid, it is an important raw material in the chemical industry, especially used in plasticizer...

Tuesday 15 March 2022

Quantité : 10w - Prix : 1~100usd

Overview of Automotive Primer Spray Gun Being the first coating applied, without doubt, primer is a key part of finishing. Not only offering a smooth base, but it also helps cover stains and enhances the protection of the substrate. With such an irreplaceable part in achieving the...

Tuesday 15 March 2022

Quantité : 10w - Prix : 1~100usd

Pressure Pot Feed Spray Gun The pressure feed hvlp spray gun has strong versatility and can control the amount of material flowing out of the nozzle to the maximum extent. From carpentry to industrial manufacturing, they are one of the most common technologies for the application...

Tuesday 15 March 2022

Quantité : 10w - Prix : 1~100usd

MP Spray Gun Features The MP Spray Gun provides greater output than the HVLP spray gun and enables faster application at higher atomization levels. With an efficiency of over 65%, the quality of the finish is comparable to that of the best high-pressure spray finish. ZEGO mp spray...

Tuesday 15 March 2022

Quantité : 10w - Prix : 1~100usd

Low pressure spray gun ZEGO provides high quality low pressure spray gun to help you to make finer and cleaner lines. The paint is released in the form of a spray. Simply to say, these low pressure spray guns use compressed air and are easy to paint. Professional advice and good service...

Tuesday 15 March 2022

Quantité : 10w - Prix : 1~100usd

Description of undercoating spray gun Undercoating, as a barrier, protects the object from corroding because of moisture, salt, and other substances. Using an undercoating spray gun to apply undercoating to the object is one of the convenient methods. The undercoating spray gun is...

Tuesday 15 March 2022

Quantité : 10w - Prix : 1~100usd

Application of miniature spray gun ZEGO provides miniature spray gun and small touch up spray gun, featuring a low-volume and low-pressure function which enables the worker easily control the spray flow, reducing excessive spraying and waste. Professional advice and good service. RFQ today...

Tuesday 15 March 2022

Quantité : 10w - Prix : 1~100usd

Description of Tire Inflation Gun If you have a car, you must prepare a tire inflation gun with gauge on your vehicle. It will ensure that you can quickly solve some tire pressure problems. A tire inflation air gun with pressure gauge can be used for filling tires of various types of valves...

Tuesday 15 March 2022

Quantité : 10w - Prix : 1~100usd

Spray foam gun In the process of spraying materials, spray foam gun is essential. The spray gun foam needs to mix the material quickly during the spraying process, which needs to be done at a very fast speed, because the bonded material begins to harden immediately. Therefore, no...

Tuesday 15 March 2022

Quantité : 10w - Prix : 1~100usd

Overview Of Siphon Spray Gun Thesiphon feed detail spray gun has the paint located directly behind the nozzle and uses airflow to draw the paint upward and cause a paint mist by pressure at the nozzle when spraying. Using a siphon paint gun is more stable to facilitate paint filling...

Saturday 12 March 2022

Quantité : 50pcs-200p

A trash can is a container for temporarily storing waste, and is usually made out of metal or plastic.MAX Factory, as a dustbin supplier, manufacture from single-stream recycling bins to triple or multi-stream recycling bins; our recycling bins are ideal for placement in any indoor...

Saturday 12 March 2022

Leadtekdisplay standard TFT LCD Module are available in various sizes from 0.95'' 2.4'', 2.8'' TFT LCD to 32'' TFT LCD. These TFT LCD module are focus on common specification like familiar size, resolution, application, and normal temperatures of -10°C to +50°C or -20°C to +60°C....

Friday 11 March 2022

Prix : 100USD

Diaphragm Pressure Gauges Diaphragm seals are available from many different materials, including 316 SST, Hastelloy C, MONEL, TEFLON and many others. For gaseous and liquid, aggressive and highly viscous or contaminated media, also in aggressive ambience Process industry: Chemical/petro-chemical...

Thursday 10 March 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

For plastic medical device manufacturers, it means that medical supervisors are required to supervise and manage the materials used to manufacture the equipment, the medical injection molds parts are designed to withstand high temperatures and chemical corrosion. In this way, it...

Thursday 10 March 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

Gas & Water assisted injection molding Since the thermal conductivity and heat capacity of water are much bigger than nitrogen, so the injection cycle of water-assisted is about 70% shorter than the injection cycle of gas-assisted molding; The product wall thickness of water-assisted...

Thursday 10 March 2022

Prix : 1000-6000USD

Locating Ring Mold Heat Shield Locating Ring Precision Positioning Ring The locating ring plays a significant role in injection molding. With an efficient locating ring mold, it is convenient to manufacture high-quality products. In our mold factory china,we will provide more types...

Thursday 10 March 2022

Prix : 1000-6000USD

Gearbox High precision gearbox, reducer for servo motor, easy assembly, long life Injection molding gearbox paves a way to manufacture gears in batch production with high efficiency. We make sure all the injection molding gearboxs are of high quality. Features of COSMOPlat Gearbox...

Thursday 10 March 2022

Prix : 1000-6000USD

Engine Cylinder Block Engine Block With Sufficient Strength And Rigidity And Long Service Life Engine block mold is mainly used to manufacture engine blocks in the sand casting process. With high-efficiency engine block molds, blocks can be created in mass production. Description...

Thursday 10 March 2022

Prix : 5000-50000USD

Crane Drum is a part of crane lifting mechanism which is used to full in, entwine, and store wire rope. The rope drum has consisted of drum shaft, flange type annular gear, drum hub, bearings, bearing pedestal, etc. The material of the drum is usually no less than HT20-40 cast iron...

Thursday 10 March 2022

Colorful Tablecloth Table decoration--attractive brief colorful style tablelcoth will make sweet happens. Color fastness. eco-friendly dyes, durable materials are composed of high quality natural multi colored tablecloths. Our attitude & professional will convince u! Description...

Wednesday 09 March 2022

Prix : 100USD

What is plastic injection molding? Plastic Injection molding is a molding method that combines injection and molding. The advantages of plastic injection molding method are fast production speed, high efficiency, operation can be automated, variety of colors, shapes can be from simple to complex...

Wednesday 09 March 2022

This product is a colorless transparent liquid, inflammable, explosive. Dimethyl dichloro silane is the raw material of silicone products, the reaction generated under the influence of water HCL, avoid sharp, contact heat, fire, and static electric spark. Document Download Technical...

Wednesday 09 March 2022

Product Name: Dimethylcyclosiloxane (DMC) Molecular Formula: [(CH3 ) 2 SiO]n ，n=3~7 CAS No.: 69430-24-6 Physical and Chemical Properties: Flash Point: 55℃ Relative Density (water=1): 0.956 Appearance: Colorless transparent liquid without visible impurity Technical Data of Dimethylcyclosiloxane...

Tuesday 08 March 2022

Medical Equipment Mould Medical device injection molding is a process using medical-grade plastic materials to manufacture different durable medical parts and components. The medical device plastic injection molding process can provide benefits for a variety of applications such...

Tuesday 08 March 2022

Quantité : 1000pcs - Prix : USD80-USD230

Agricultural uav spraying drone T1-10L Nova T1 series of agricultural spraying drones, integrated advanced deep customized flight controller, efficient spraying system, portable folding body and simple professional remote control, specially designed for agricultural spraying. Agriculture...

Tuesday 08 March 2022

Quantité : 1 million - Prix : 200-2000 CNY/pc

SPD Network The network surge protection device, protects a data line, including computer network signals, communication devices, and so on. Plug the surge protector ethernet port into the data cable and ground it to prevent lightning surges from damaging the device. For the price...

Tuesday 08 March 2022

420J1 stainless steel: After quenching, it has high hardness and good corrosion resistance (magnetic). After quenching, the hardness of 420J2 stainless steel is higher than that of 420J1 steel (magnetic). There are 44 equivalent materials for AISI 420 Equivalent Stainless Steel. Generally...

Tuesday 08 March 2022

BALL VALVES As one of pneumatic ball valve suppliers , MstnLand provides high performance ball valve products, including Trunnion mounted ball valve, Floating ball valve, Welded structure ball valve, Top entry ball valve, Wafer ball valve, Butt treaded socket welding ball valve...

Tuesday 08 March 2022

Prix : 10-30USD

Exfoliating Scrub Cleanser Exfoliating Scrub Cleanser Features This gentle face cleanser and exfoliator helps polish away dead skin cells for healthy, glowing-looking skin. Infused with purified water and vitamin E, its rich hydration leaves skin feeling smooth and looking more luminous...