HIGHER - 6284 Annonces

Saturday 15 October 2022

In duplex pipe fittings, the ferrite phase and the austenite phase account for about half of its solid solution structure, and the content of the lesser phase generally needs to reach 30%. In the case of low C content, the Cr content is 18%~28%, and the Ni content is 3%~10%. Some...

Saturday 15 October 2022

The microstructure of duplex seamless pipe is approximately 50% ferrite (body-centered cubic structure) and 50% austenite (face-centered cubic structure) crystal structure. The two phases coexist as a stable mixture, but this is different from two-phase alloys, where one of the two...

Saturday 15 October 2022

Prix : 1,00 €

Auto recloser relay control higher voltages or currents by using lower voltages or currents. When a certain voltage or current is applied to both ends of the electromagnetic relay coil, the magnetic flux generated by the coil passes through the magnetic circuit composed of the iron core...

Saturday 15 October 2022

Prix : 10-30USD

We have high TG material from ITEQ, ISOLA, ShengYi, Panasonic, etc all the time and rich experiences fabrication high TG boards. With the rapid development of the electronic industry, especially the electronic products represented by computers, to the direction of high performance...

Saturday 15 October 2022

Prix : 10-30USD

Up to 12 oz PCB Manufacturing, Rich experience to printing solder mask, High quality guarantee for extreme copper China mobile PCB board. Fastlink Electronics is one of the world's leading heavy copper PCB manufacturers. Since 2009, Fastlink has been producing and supplying heavy...

Saturday 15 October 2022

Paraffin wax emulsion is a multi-phase emulsion in which materials such as natural wax and synthetic wax are dispersed in water under the action of an emulsifier. The production method is mainly a phase inversion emulsification method. We, being one of wax emulsion suppliers, can...

Saturday 15 October 2022

High Speed Spindle Bearings Spindle bearings are single row angular contact bearings which are designed for the highest speeds and highest load ratings. They support thrust loads in one direction, and at very high speeds can simultaneously absorb high radial forces and single direction...

Saturday 15 October 2022

High Speed Angular Contact Bearing VXO has announced that it has developed an angular contact ball bearing using for ball screw, which can be applied to the series of ultra-high speed angular contact bearings for the main spindle of machine tools. The new high precision bearing meets...

Saturday 15 October 2022

Compared with ball bearings, double row full complement cylindrical roller bearings have higher radial load capacity. The design of cylindrical rolling elements also allows such bearings to accept relatively faster speeds than other forms of roller bearings. Cylindrical needle roller...

Saturday 15 October 2022

Apart from passenger cars, we also supply thermostat applied for buses and trucks. Our thermostat in truck for heavy commercial vehicles fit and perform like the original. We continue to contribute our strength to make trucks and buses work better on the road. Heavy Duty Thermostat...

Friday 14 October 2022

The maximal rotation of spindle can reach 2500rpm/min It can meet the large-torque requirement during the rough machiningand the high rotational speed during the fine machining CNC MILLING AND BORING MACHINE ADVANTAGES The double anti-backlash gearbox is controlled by a servo motor...

Friday 14 October 2022

CNC milling machine is automatic processing equipment developed on the basis of a general milling machine. Their processing technology is basically the same and their structure is somewhat similar. CNC industrial machine are divided into two categories: without magazines and with a magazine...

Friday 14 October 2022

Jiangsu Saideli, an industrial centrifuge machine manufacturer, continuously develops high-tech and top-quality products which include industrial centrifuge separators, industrial centrifugal dryer, and industrial filter. As a national high-tech enterprise, Saideli integrates scientific research...

Thursday 13 October 2022

Meank provides powerful cylinder magnets for sale at good wholesale prices. Our rare earth giant neodymium magnets for sale have higher energy products and are known as NdFeB strong magnet or powerful NdFeB magnets. As the third generation rare earth magnet, neodymium magnet, also...

Wednesday 12 October 2022

It is suitable for the positioning and welding of the welding seam at the outer corner formed by the double rib arc plate and the rib plate of the heavy truck brake shoe assembly. The equipment adopts a fully enclosed overall design, which has a beautiful appearance and is easy to maintain...

Wednesday 12 October 2022

The equipment is a CNC milling machine developed and produced for the milling processing of the forklift brake base plate boss. The equipment can realize automatic rotation, avoid the milling cutter, and quickly stop and start the spindle. And can save 10 groups of programs to call at will...

Wednesday 12 October 2022

The brake shoe welding machine is independently developed and produced by Xihe. At present, the medium frequency roll welding machine is used for single rib brake shoes, and the gas shielded welding machine is used for plug welding, fillet welding and reshaping of double rib brake...

Tuesday 11 October 2022

Prix : $700-1100/MT

Pink fused alumina is based on alumina powder as the main raw material, adding some quantity of chromium oxide, then melted at high temperature. It is pink in color, the hardness is similar to that of white fused alumina, and its toughness is higher than that of white fused alumina...

Tuesday 11 October 2022

Prix : $700-1100/MT

High temperature calcined brown fused alumina is formed by high temperature and medium temperature calcined abrasives in the production process of raw brown fused alumina, and then annealed. Typical Physical Properties of High Temperature Treated BFA 01. Eliminate Abnormal Expansion...

Tuesday 11 October 2022

Prix : $700-1100/MT

Green silicon carbide is produced as the same type as the black silicon carbide, except the different raw materials. Its crystallization has higher purity and hardness. Green silicon carbide is suitable for processing hard alloy, metallic and non-metallic materials with hard and brittle...

Tuesday 11 October 2022

Prix : $700-1100/MT

According to the different alumina content, our fused alumina can be divided into brown fused alumina, white fused alumina, pink fused alumina, black fused alumina, zirconia fused alumina etc. Different Types of Fused Alumina Brown Fused Alumina High bulk density, low iron, good crystallization...

Monday 10 October 2022

Stent ultrasonic coating system specially for drug eluted stent coating Stent spray coating system with precisely control of deposition by ultrasonic nozzle technology Without adhesion, pinholes and other defects on coating layer Stent coating machine with excellent uniformity, stability...

Monday 10 October 2022

The coating thickness of benchtop ultrasonic spray coating system is controllable: typically from tens of nanometers to tens of microns. The ultrasonic spray coater could equipped with various ultrasonic nozzle options for different droplet sizes and spray widths. The Uniformity of...

Monday 10 October 2022

Industrial Ultrasonic Coating System Coating uniformity: > 95% Non-clogging ultrasonic nozzle technology reduces maintenance cost and down-time Continuous liquid delivery in 24 hours Utilization rate of raw materials is more than 85% XYZ three-axis servo motion system and motion...

Monday 10 October 2022

Ultrasonic atomizer transducer and ultrasonic atomizing driving circuit are designed separately and installed flexibly, which is more suitable for OEM development High quality transducer, providing more durable and stable ultrasonic atomization performance Ultrasonic atomizer with...

Sunday 09 October 2022

The equipment we have developed includes: one-step extrusion molding equipment for mixed waste plastic films; two-step extrusion molding equipment for mixed waste plastics; co-directional flat one-step extrusion molding equipment; single-station and double-station extrusion molding...

Sunday 09 October 2022

PaneraLux has more than 17 years of experience in flex led lights manufacturing and design, with innovative products covering all types of products on the market as one of the leading China flexible led manufacturers and flexible led strip suppliers. All china flexible led strip lights...

Saturday 01 October 2022

The electrothermal digestion instrument adopts the encircling heating method to digest the sample under normal pressure. The wet digestion method is used to achieve the effects of rapid, efficient, convenient and large processing capacity. The digestion instrument surface is treated...

Friday 30 September 2022

Quantité : 300sets/mo - Prix : 7800-200000USD

With the development of food industry, food deep processing has been paid more and more attention by the world, especially in the birth of instant meals and convenience foods , which has promoted the rapid development of fresh and dehydrated vegetable industry and requires the deep...

Friday 30 September 2022

Quantité : 300sets/mo - Prix : 7800-200000USD

Features of Cassava Starch Extraction Machine Processing Capacity: 15-35Tons/hour Application Scope: Crushing the cassava into the slurry Product Introduction: Cassava rasper machine, rasper crusher, cassava crusher machine, cassava crushing machine for cassava starch and cassava...