LM-80 Testing
Quantité : 10,000 Prix : Contact me
What is LM-80 Testing?
It is the Illuminating Engineering Society of North America (IESNA) approved standard for measuring lumen maintenance of LED light sources. LM-80 apply to the LED package, array, or module alone, not a complete system, it is testing a component level. The standard does not provide guidance for extrapolation of testing results.
The LM-80 standard is accepted worldwide with slight variations in different countries. The data resulting from the LM-80 measurements are matrices of lumen maintenance values. LED manufacturers use this data in combination with their UL IN-SITU thermal testing to predict the lumen maintenance of the LED fixtures themselves.
Who can perform testing?
SHENZHEN LCS Compliance Testing Laboratory Ltd. with its partnership company Korea Institute of Lighting Technology is an Approved Lab to test LM-80 recognized by the EPA Laboratories. Only reports from recognized laboratories are relevant. This standard is used for Department Of Energy (DOE) ENERGY STAR program early qualification in conjunction with other reports.
What does it provide?
The testing report issued according to a standard format will provide luminous flux for a given current over a 6,000 hours period with interval measurements. Luminous flux will be measure for 3 different LED case temperatures: 55ºC, 85ºC and a third temperature to be selected by manufacturer. Besides, the lumen maintenance, the chromaticity shifts over the measured period.
IES LM-80 "Measuring Lumen Maintenance of LED Light Sources
- Approved method for measuring lumen depreciation of solid-state (LED) light sources, arrays and modules
- Does not cover measurement of luminaires.
- Does not define or provide methods for estimation of life.
Procedures/Conditions
Ambient conditions and setup
- Case Temperature measured and maintained
- Case Temperature measurement point
- Airflow minimized
- Operating orientation and spacing per manufacturer
Electrical
- Voltage and Current (AC or DC levels)
- Voltage waveshape (harmonic distortion <3%)</li>
- Current Regulation
Instrumentation
Measurement Methods
Case Temperatures
- Measurement performed at multiple temperatures to address IN-SITU conditions
- 55C, 85C and 3rd manufacturer selected temperature
Photometry Spectral radiometer preferred method
- Temperature: 25C ambient
- Drive current per manufacturer
Testing Intervals
- 6000 hours min testing period 10K preferred
- Minimum at least every 1000 hours
Testing Output and Use
Test report basics
- Description of sources tested
- Ambient conditions (Airflow, temperature, RH etc)
- Case test point temperature
- Electrical conditions
- Lumen maintenance data
- Observation of failures
- LED monitoring interval
- Chromaticity shift over time
LM-80 provides no determination or estimation of expected life or lumen output beyond test data.
If you have any question about LM-80 please contact us:
Liz Cheung / Senior Sales Engineer
LCS TESTING·CERTIFICATION·INSPECTION
Tel.: +86 760 8528 2956(Ext: 2020)
Skype: +86 1312 9206 515
Add: 1F., Xingyuan Industrial Park, Tongda Road, Bao'an Blvd,
Bao'an District, Shenzhen, Guangdong, China
Web: http://en.lcs-cert.com/
Personne à contacter : Liz Cheung, +13 1 29 20 65 15
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de LM-80 Testing Rechercher dans la catégorie : Biens d'équipement Rechercher dans la catégorie : testing |
Dimanche 29 mai 2016
Quantité : 200 - Prix : 7,15 €
- Avantages des luminaires LED OSRAM - - Qualité OSRAM - Produits LED de haute qualité pour les demandes exigeantes - Remplacement direct des luminaires conventionnels fluorescents ou halogènes - Le remplacement des luminaires standard permet jusqu'à 85 % d'économie d'énergie...
Mardi 26 mai 2015
Quantité : 200 tonnes - Prix : 200,00 €
Nous fabriquons la meilleure litière pour animaux sur le marché. Utilisant un séchoir de très haute qualité ,nous pouvons contrôler le taux d'humidité de façon continue, entre 10% et 12% d'humidité. Notre séchoir, ayant une température variant entre 200° et 500° , élimine toute...
Bois Plus SARL
- 4054 - Sousse
- +21 6 28 12 83 62
Jeudi 06 novembre 2014
poudre de lait poudre de lait obtenue par séchage spray à partir de lait entier, pasteurisé à température moyenne.notre produit (lait en poudre) est apprécié en tant qu'adjuvant précieux dans toutes sortes d'aliments aussi bien du point de vue nutritif que techno fonctionnel. dissout...
icrcasa
- 30007 - murcia
- +34 9 68 06 96 97