FLEXURAL - 378 Annonces

Samedi 18 mai 2024

alumina ceramic beads for PWHT is made by special way,the density is higher,made by special material of 95% alumina,in this way,the heat treatment is better. Precise Mold control so that the tolerance is strict Technical data Density 3.65-3.7g/cm3 Alumina content 95% Hardness(Mohs)...

Vendredi 17 mai 2024

Quantité : 1000000kg - Prix : 1usd/kg

Grouting Agent Grouting agent has excellent properties such as minimum inflation, non-contracting, high fluidity, self-compaction, extremely low bleeding rate, high filling degree, thin layer and small diameter of air foam, high strength, rust protection and resistance, low alkali...

Vendredi 17 mai 2024

ZM-1 Aliphatic Superplasticizer This product is formed by polycondensation of sulfonated acetone and small monomer, characterized by high dispersibility and non-air entrainment, it effectively improves compactibility of concrete, enhances anti-permeability, and lowers water-binder...

Mardi 16 avril 2024

BOYA fine blanking production division, the products are good stability and reliability, high degree of automation, high production efficiency, simple operation and ergonomic. For localization of high-end intelligent fine blanking equipment, raise the capacity of fine blanking production...

Vendredi 29 mars 2024

Quantité : 2000T/Mont

What is High Alumina Cement High Alumina Cement (HAC, sometimes known as calcium aluminate cement (CAC) or aluminous cement) is composed of calcium aluminates, unlike Portland cement which is composed of calcium silicates. It is manufactured from limestone or chalk and bauxite. High...

Jeudi 21 mars 2024

Prix : RMB20-100/kg

ABS resin is a terpolymer composed of acrylonitrile, butadiene and styrene. ABS has the rigidity, chemical resistance and heat resistance of polyacrylonitrile, the appearance and dimensional stability of polystyrene, and the cold resistance and impact resistance of polybutadiene....

Mardi 05 mars 2024

Dental Tooth Materials PEEK Removable Denture R&D Series Dental peek material R&D Series has good wear resistance and high mechanical strength. It is mainly used in dentistry in medical field. Specification of PEEK Denture Material R&D Series Material Properties Test...

Jeudi 22 février 2024

Quantité : 1000t/m - Prix : RMB20-100/kg

Anmei-TPU Flame Retardant for Engineering Plastics TPU thermoplastic polyurethane elastomer is a type of polyurethane elastomer. It not only has the high elasticity of rubber but also has the plasticity of polymer materials.TPU (polyurethane) is flammable, and its limiting oxygen...

Mardi 20 février 2024

Quantité : 2000pcs

PVC Rigid PVC Extrusion Profile from Huayu is a high quality, durable thermoplastic material designed for demanding applications. This profile is made from hard PVC, which offers superior performance and a long service life. It is available in a wide range of shapes, sizes, colors...

Samedi 03 février 2024

Isostatically pressed graphite is a new graphite product developed in the 1960s, which has a series of excellent properties. For example, the isostatic graphite heat resistance is good, in an inert atmosphere, with the increase of the temperature of its mechanical strength is not reduced...

Dimanche 21 janvier 2024

Quantité : 2000tons p - Prix : USD 0.8-1.3/kg

Steel Fiber For Fatigue Resistance Fatigue resistance of steel fiber compared with ordinary concrete, the flexural and compressive fatigue properties of steel fiber reinforced concrete are greatly improved. For example, when the bending fatigue life is 106 times, the stress ratio...

Jeudi 11 janvier 2024

Tengye Magnets offers powerful rare earth neodymium cone magnets at good wholesale prices. Special shaped cone neodymium magnets refer to magnets that are not the traditional round or rectangular shape. These magnets are typically custom-designed and fabricated to fit specific applications...

Vendredi 05 janvier 2024

PA11 powder is an ideal material for many industries, including Injection Molding. The powder has been tested for use on Eplus3D's SLS 3D printers. Eplus3D also offers a wide range of validated processes for the above materials to ensure that the performance of the 3D printed parts are fully met...

Vendredi 05 janvier 2024

PA6 FR is a PA6 with 30% glass-fibers and flame retardant free of halogens. Typical Application of PA6 GF30 halogen-free FR (A1015F) PA6 GF30 flame retardant free of halogens has achieved full coverage from electronic&electrical fields to the industrial, commodity consumer market...

Vendredi 05 janvier 2024

PA6 GF 30 FR is a PA6 with 30% glass-fibers and halogens flame retardant. PA6 GF30 Halogenated FR Features Glass fiber reinforced 30% PA66 PA6 Density(g/cm3) 1.12-1.14 1.38 Water absorption(%) 1.3-1.9 1 Surface hardness M100 M100 Shrinkage(%) 0.5 0.4 Continuous heat resistance 82-148...

Vendredi 05 janvier 2024

PA6 GF15 with high tensile strength is made by 15% glass fiber reinforced, toughened, polyamide 6 resin for injection molding. Typical Application of PA6 GF15 with high tensile strength (A1307C) PA6 with 15% glass fiber toughened plastics, due to its excellent properties, good appearance...

Vendredi 05 janvier 2024

PA66GF 50 is a fiber-reinforced plastic made of Nylon 66 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing aids be added to be used in injection molding products. Typical Application of pa 6.6 gf50 (A2011J) PA66 50%GF HB grade is applied...

Mercredi 03 janvier 2024

The process is to make PTFE thin-walled tube at a certain speed through a temperature of 270℃ ~ 280℃ continuous forward rotation mold. It has all the excellent performance of PTFE but also has the characteristics of flexural, mainly used for strong corrosion resistance and high temperature...

Samedi 09 décembre 2023

As one of leading hot rolled steel coil factory in China, Steel Searcher provides various types of steel coil for sale, which also known as coil steel, galvalume steel coil, galvanized steel coils for sale, stainless steel coils for sale, PPGI steel coil and PPGL steel coil. The steel...

Mercredi 29 novembre 2023

PA66 is nylon 66, namely pa66_gf35 is glass fiber. Generally expressed as PA66 GF35, that is, 35% glass fiber is added to nylon 66. Typical Application of PA 66 GF 35 (A2000G) It is applied to lamp holder cover and cooling fan, gears and various electronic connectors, wear-resistant...

Mercredi 29 novembre 2023

Polyamide 66, reinforced with 30% of glass fiber, heat stabilized, forinjection moulding. PA6 6 GF30 is a common nylon material known for its high strength and durability, as well as provides enhanced mechanical properties. The glass fiber reinforcement of PA66 30 GF plastic improves...

Mercredi 29 novembre 2023

Material PA 66 GF 30 FR is a PA66 with 30% glass-fibers and flame retardant free of halogens. This type of polyamide PA66 contains stabilization and is optimized to use in electronic and electric applications. If you are interested, contact us now to get more information about Nylon...

Mercredi 29 novembre 2023

PA 66GF30 FR is a Nylon 66 with 30% glass-fibers and flame retardant halogenated. Typical Application of PA66 GF30 Halogenated FR (A2014F) The advantage of nylon 66 GF30 halogenated FR can maintain the original physical and chemical properties of flame retardant products. Processing...

Mercredi 29 novembre 2023

Elastomer toughened nylon 66 with 20% glass fiber is called PA66 GF20, it shows high oil resistance, high impact resistance, good resistance to low-temperature notch impact strength for high impact resistance parts. Anmei modified plastic, as a big and responsible PA66 GF 20 manufacturer...

Mercredi 29 novembre 2023

Nylon 66, filled with 20% of glass fiber and flame resistance halogens, are extruded by Coperion twin-screw extruder is PA66 GF 20 halogenated FR. Typical Application of Anmei PA66 GF20 Halogenated FR (A2014D) (A2015D) PA66 20% glass fiber and halogenated flame resistance mixed modified...

Mercredi 29 novembre 2023

PA6 6GF15 is a 15% glass fiber reinforced, toughened, polyamide 66 resin for injection molding Typical Application of Anmei Group PA66 GF15 With High Tensile Strength (A2307C) PA66 15% glass fiber and high toughness modified grades are applied to the sectors of electrical switch with...

Vendredi 10 novembre 2023

Quantité : 22000tons/ - Prix : 30-200CNY/KG

As a leading TPO supplier and TPO factory, ATPolymer provides TPO polymer wholesale at good prices. The blend composed of isotactic polypropylene and ethylene-propylene copolymer is called TPO (thermoplastic polyolefin, Thermoplastic Polyolefin). TPO Polymer By Processing Types...

Mercredi 08 novembre 2023

What is High Alumina Cement High Alumina Cement (HAC, sometimes known as calcium aluminate cement (CAC) or aluminous cement) is composed of calcium aluminates, unlike Portland cement which is composed of calcium silicates. It is manufactured from limestone or chalk and bauxite. High...

Mardi 07 novembre 2023

Light Cure Tray is a series of light curing resins indicated for making individual trays for impression, temporary base plates for arranging teeth and also bite plates for removable prosthesis adjusting. Technical Features Product Curing time Thickness Working time Flexural...

Mardi 07 novembre 2023

Light Curing Tray is a series of light curing resins indicated for making individual trays for impression, temporary base plates for arranging teeth and also bite plates for removable prosthesis adjusting. Light Curing Tray 1.4mm is specially designed for dental technicians who are...