FLUIDITY - 367 Annonces

Vendredi 17 mai 2024

Quantité : 1000000kg - Prix : 1usd/kg

Grouting Agent Grouting agent has excellent properties such as minimum inflation, non-contracting, high fluidity, self-compaction, extremely low bleeding rate, high filling degree, thin layer and small diameter of air foam, high strength, rust protection and resistance, low alkali...

Vendredi 17 mai 2024

Quantité : 1000000kg - Prix : 1usd/kg

Plastic-retaining Agent Brief introduction The plastic-retaining agent is compounded by polymer materials such as organic hydroxyl salt, multielement sugar solutions and has the functions of retard, plastic-retain and water-reduction on the cement. It has a good compatibility with...

Vendredi 17 mai 2024

Quantité : 1000000kg - Prix : 1usd/kg

ZM-3C Polycarboxylic Efficient Pumping Aid ZM-3C is an efficient superplasticizer for concrete compounded by polycarboxylic efficient superplasticizer as well as water-holding, plasticity-maintaining and retarding ingredients, which has strong dispersibility on cement particles...

Vendredi 17 mai 2024

Quantité : 1000000kg - Prix : 1usd/kg

ZM-1B Naphthalene-based Superplasticizer This product is formed by sulphonation, hydrolyzation and condensation of crude naphthalene. Its chemical name is naphthalene sulfonate formaldehyde condensation and it has strong dispersibility on cement particles. It can effectively increase...

Vendredi 17 mai 2024

ZM-1 Aliphatic Superplasticizer This product is formed by polycondensation of sulfonated acetone and small monomer, characterized by high dispersibility and non-air entrainment, it effectively improves compactibility of concrete, enhances anti-permeability, and lowers water-binder...

Dimanche 12 mai 2024

Prix : USD 25

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Vendredi 10 mai 2024

Quantité : 200kg - Prix : 6.87-9.98USD/kg

Typical Application of electronic potting compound silicone rubber: electronic potting compound silicone rubber is suitable for bonded seal of electronic components, power module and control module, which requires waterproof and insulation. It can be broadly used for LED screen...

Vendredi 10 mai 2024

Quantité : 200kg - Prix : 5.89-9.58usd/kg

Specification - Durable - High tear strength for replication - Low shrinkage - High simulation - Cover fine details 1. Application of Rtv Liquid Moulding Silicone Rubber Rtv Liquid Moulding Silicone Rubber is mainly applied for making various molds,such as reproduction of poly resin...

Vendredi 10 mai 2024

Quantité : 200kg - Prix : 9-14usd/kg

- Specification - 1. Good characteristics of easy-operation 2. Light viscosity and good fluidity 3. Low shrinkage 4. Favorable tension 5. No deformation - Manual silicone rubber for shoe mold making Application: - silicone rubber for shoe mold making is mainly used for shoe molds...

Lundi 06 mai 2024

MAC-G320 Automatic Mold Flux Feeding Machine Overview MAC-G320 automatic mold flux feeding system is a new generation product of automatic adding mold flux, which is independently developed by Wuhan CenterRise M&C Engineering Co., Ltd. According to different steel grades, casting speed...

Lundi 06 mai 2024

Quantité : 1 - Prix : 50000usd

LAG-S200 Ladle Slag Detection System (Vibration Type) Overview The continuous casting vibration type ladle slag detection device is used to detect the slag content of the ladle nozzle in the steelmaking continuous casting process, so as to improve the cleanliness of the tundish molten...

Samedi 04 mai 2024

Quantité : 1 SET - Prix : 8000USD

50KG Port containerized movable weighing and bagging machine Adopting advanced industrial control and full electronic weighing technology, the machine has a series of advantages, such as: High weighing accuracy, fast bagging speed, high automatic level, stable and reliable performance...

Lundi 29 avril 2024

Consumer electronics is very popular in our daily life. It consists of many different plastic parts, pcb boards, wires, battery and some metal parts. To produce the plastic components of consumer electronics, we need manufacture the plastic injection molds first. Consumer electronics...

Samedi 27 avril 2024

HEMC cellulose finds extensive applications in various industries, including water-based latex coatings, building construction and materials, printing inks, and oil drilling. In the context of building construction, its primary uses encompass cement-based plasters, gypsum plasters...

Samedi 27 avril 2024

mortar mix with plasticiser are extensively utilized in the building industry due to their versatility and wide range of applications. These mortars are commonly used in both new construction projects and renovation works. They consist of a mixture of cement, sand, limestone powder...

Mercredi 17 avril 2024

MAGNESIUM ALLOY DIE CASTING YiRui Metal can provide the service of die cast magnesium, provide the related magnesium alloy parts according to the customer's requirements, and also can produce to meet the customer's needs. Cold type magnesium alloy dies casting machine(Thixo) 250T/2 sets...

Mercredi 17 avril 2024

MAGNESIUM ALLOY The bright future of the magnesium market benefits from the transformation and level-up of China's automobile industry, like 3C and other industries. Among them, the lightweight meets the environmental protection needs, all the good things for the wide use of magnesium ingots...

Mardi 16 avril 2024

Improve flame-retardant performance: It has obtained UL 94V0 grade yellow card certification (1.5mm-6.0mm), which fully supports the finished cable products to pass the flame retardant test requirements of VW-1 or IEC60332. Improve environmental resistance: According to the requirements...

Mardi 16 avril 2024

TPEE Polymer (TPE Elastomero Termoplastico) is a block copolymer containing polybutylene terephthalate (PBT) hard segments and polyether soft segments. ATPolymer is a leading manufacturer and supplier in the tpe thermoplastic polyester elastomer market that offers all kinds of TPEE material...

Jeudi 11 avril 2024

Silicone Baking Ware And Baking Mold Factory Bohao is one of the top bakery mould manufacturers, Our custom silicone baking molds for air fryer are safe to use in microwaves, ovens. Collapsible silicone bakeware molds are dishwasher safe. It's great for making cake, prepared food...

Mercredi 10 avril 2024

Linum usitatissimum seed oil is extracted from the linseed by SFE-CO2 Extraction. Cas 8001-26-1 linum usitatissimum oil is a triglyceride like other fats. Flaxseed oil bulk is distinctive in the fatty acid composition of triglycerides, which contains an unusually large amount of α-linolenic acid...

Mardi 02 avril 2024

Prix : 1-10usd

Our ball bearing exterior door hinges are a high-quality hardware component designed to provide smooth and efficient operation of doors. These bearing type hinges are characterized by their durability, strength, and smoothness, thanks to the ball bearings that reduce friction during use...

Mercredi 20 mars 2024

Name: Fumed silica Appearance: Fluffy white powder. Technical Data of Fumed Silica Item Indexes The nitrogen adsorption specific surface area/（m2/g） Typical values±30 Loss on ignition/% ≤ 2.5 Silica content/% ≥ 99.8 Suspension PH 3.7~4.5 Al2O3 content/（mg/kg） ≤ 400 TiO2...

Mardi 27 février 2024

Emulsification efficacy of lecithin from egg yolk cas no.: 93685 90 6 is a critical factor to the quality of lipid emulsions. Better emulsification ability is an important basis for selecting egg yolk lecithin emulsifier in the development of lipid emulsions. CAS NO.: 93685 90 6 EGG...

Jeudi 22 février 2024

Pekhill's organic maltodextrins wholesale are derived from organic corn starch, DE 8-10，De9-13, DE11-16, DE16-20 available. As one of the leading organic maltodextrin supplier , Pekhill's annual production of maltodextrin is 120,000 tons. Organic maltodextrin (MD), a polysaccharide...

Jeudi 22 février 2024

BQ-1054A/B is a two-component, semitransparent addition curing liquid silicone with easy vulcanizing process. It is suitable for clothing label. Category: Trade Mark Silicone Rubber Product Features Of Molding Material LSR For Fabric/Garment/Textile Fast curing speed Strong adhesion...

Jeudi 22 février 2024

SH-22XX series is transparent silicone rubber. It is special for the production of medical tubes. Hardness ranges from 40A to 80A. FDA, LFGB and Biocompatibility. etc certified. Category: Medical Grade Silicone Rubber Properties of silicone rubber medical for Catheter Cavity Excellent...

Lundi 19 février 2024

Our fully automatic flour packing machine is a fully automatic and multi-functional wheat packing machine , which is suitable for the full-automatic packaging of powder products in food, medicine and chemical industries. Such as: food additives, milk powder, soy milk, protein powder...

Jeudi 08 février 2024

Quantité : 22000tons/ - Prix : 30-200CNY/KG

Product description: high-hardness (≥90A) TPU materials, with problems of abnormal glue, surface scratches, uneven bright fog, surface tingling, particles, etc, which are caused by excessive crystallization speed in the process of pipeline extrusion.While ATP's new series TPU can...

Jeudi 01 février 2024

Quantité : 1-50 tons - Prix : 1.7-3.5 usd/kg

Best Glue for Photo Albums The hot-melt glue for the photo album glue passes through the lamination machine and is coated on the photo album cardboard and bound to form a photo album collection. Choose best glue for photo albums! Best Glue for Photo Albums The wholesale hot melt adhesive...

Mercredi 31 janvier 2024

KimaCell® CMC LV sodium carboxymethyl cellulose is a non-toxic, odorless, tasteless white or slightly yellow Powder, with the functions of thickening, emulsification, water retention, colloid protection and suspension, is often used as a fluid loss reducer, emulsifier and flocculant...

Mercredi 31 janvier 2024

Prix : USD3000-4000

Kima is a leading manufacturer of cellulose ether from China, and has been serving global cellulose ether market over ten years with our brand KimaCell®. Kima offers a comprehensive range of cellulose ether products for sale to meet the requirement of global customers. KimaCell®...

Samedi 20 janvier 2024

Quantité : no limited - Prix : USD900-USD2000/MT

The Fischer-Tropsch Waxes are made from carbon monoxide and hydrogen in the presence of the selected catalyst. Generally, the feedstock is produced from coal or natural gas. The final synthetic waxes tend to be saturated, straight-chain hydrocarbons. Their very linear molecular...

Jeudi 18 janvier 2024

HTV quality or high-temperature vulcanized silicone rubber is used in the compression molding press. Special silicone rubber materials are chosen based on their intended use, whether they need to be fire, oil, or heat resistant. Food and medical qualities have FDA and BFR approvals...

Vendredi 05 janvier 2024

When the material in the polymerization reactor is a homogeneous system, the viscosity of the material increases significantly with the increase of the conversion rate of monomer. Stirring makes the reaction material flow strongly and makes the temperature of each part of the material uniform...

Vendredi 05 janvier 2024

The hot press vacuum press is used for the test parameters of the material properties, including the fluidity of composite materials, resin fluidity, and gel time. The composite material is formed after hot pressing and curing. The parameters of temperature and pressure in the hot...

Jeudi 04 janvier 2024

Our Animation Reel Design Service specializes in creating captivating and visually stunning animation reels that effectively showcase your work or portfolio. Our team of skilled animators and graphic designers combine their creativity and technical expertise to develop dynamic and...

Jeudi 28 décembre 2023

Aluminum Die Casting Mold When working at high or low temperatures, they also maintain good mechanical properties and have good corrosion resistance. properties and antioxidant properties. Die castings are widely used in construction, hardware, equipment, machine tools, ships, aerospace...

Samedi 09 décembre 2023

BQ-65XX is a high transparent LSR by molding process. Hardness ranges from 40A to 80A. It has superior mechanical properties and is suitable for the high strength of silicone rubber medical devices. And it has passed FDA, LFGB and Biocompatibility, etc related test. Properties of...

Samedi 02 décembre 2023

Description Description of Toothpaste Grade Carboxymethyl Cellulose Gum The requirements of daily necessities are increasing constantly, with the improvement of people's living standards. As a kind of daily necessity, the value of Toothpaste is not limited to mouth cleaning and gradually...

Samedi 02 décembre 2023

What Is Stabiliser 466? Description Description of Food Grade CMC Sodium carboxymethyl cellulose (CMC/cellulose gum) is a kind of cellulose ether, that can easily be soluble in cold and hot water, with maximum yield, most widely and conveniently used among all cellulose products....

Samedi 02 décembre 2023

Sodium carboxymethyl cellulose gum (Na-CMC or cellulose gum) is the most widely used and most frequently used type of anionic cellulose ether. It is a white fibrous or granulated powder. Odorless, tasteless, non-toxic, hygroscopic, easily soluble in both hot and cold water, obtained...

Vendredi 01 décembre 2023

YiRui Metal can provide the service of magnesium die cast, provide the related magnesium alloy parts according to the customer's requirements, and also can produce to meet the customer's needs. Cold type magnesium alloy dies casting machine(Thixo) 250T/2 sets. 500t/2 sets , 1200t/2...

Vendredi 01 décembre 2023

The bright future of the magnesium market benefits from the transformation and level-up of China's automobile industry, like 3C and other industries. Among them, the lightweight meets the environmental protection needs, all the good things for the wide use of magnesium ingots, especially...

Jeudi 30 novembre 2023

Pekhill's organic maltodextrins wholesale are derived from organic corn starch, DE 8-10，De9-13, DE11-16, DE16-20 available. As one of the leading organic maltodextrin manufacturers, Pekhill's annual production of maltodextrin is 120,000 tons. Organic maltodextrin (MD), a polysaccharide...

Mardi 07 novembre 2023

Light body dental impression material is a dental wash material with better fluidity. Due to its excellent hydrophilicity and viscosity, it can be used with tray materials to make precise dental impressions. Normal set and fast set are available.Different Types Of Light Body Impression...

Jeudi 26 octobre 2023

Prix : USD900-USD2000/MT

Classification of High Melting Point Polypropylene Wax Products: Plastic Additives Product Description: This product has the characteristics of high melting point, low melting degree, good lubricity, and dispersion. It is an excellent additive for polyolefin processing at present...

Jeudi 26 octobre 2023

Prix : USD900-USD2000/MT

Lubricants improve the fluidity and demoulding of the resin. In processing, it reduces friction between resin and processing machinery, the friction between resin and resin, so that it reduces the torque to save the energy. Lubricants also increase the surface smoothness of the finished...

Mercredi 25 octobre 2023

PA has good fluidity and is easy to overflow. It is suitable to use a self-locking nozzle and heat it. At the same time, due to the rapid condensation of the melt, it is necessary to prevent the material from blocking the nozzle, runner, gate, etc., causing insufficient products....

Lundi 09 octobre 2023

Ⅰ. ABS Injection Molding Processing Performance (1) Because of the strong moisture absorption as well as high water content of ABS, the plastic parts that are made of ABS have low gloss and poor internal quality. As a result, ABS injection molding should be dried so that the water...

Mardi 26 septembre 2023

Anmei focuses on the production of modified engineering plastics. We have polyamide PA66 modified products with properties of heat-resistant, reinforced, toughened, flame-retardant, wear-resistant, weather-resistant, oil-resistant and conductive. According to the characteristics of your product...

Mardi 26 septembre 2023

Nylon66 PA66 Heat Stabilized Description Nylon66 PA66 Heat Stabilized a high temperature nylon made by the polycondensation of terephthalic acid and hexamethylene diamine. Heat stabilized nylon 6 has the properties of low water absorption, excellent heat resistance, goodprocessing fluidity...

Mardi 12 septembre 2023

What Is Brown Fused Alumina? Brown fused alumina chemical composition is a versatile product available in various forms. It includes brown fused alumina for abrasive, brown fused alumina for refractory, and high temperature treated BFA. Known for its high hardness and toughness,...

Jeudi 07 septembre 2023

Name: Fumed silica Appearance: Fluffy white powder. Technical Data of Fumed Silica Item Indexes The nitrogen adsorption specific surface area/（m2/g） Typical values±30 Loss on ignition/% ≤ 2.5 Silica content/% ≥ 99.8 Suspension PH 3.7~4.5 Al2O3 content/（mg/kg） ≤ 400 TiO2...

Jeudi 07 septembre 2023

PERFIT teeth impression material is a VPS impression material used to obtain precise and reliable impressions. These types of dental impression materials has excellent performance with long-term dimensional stability and high tear resistance. HUGE Dental is a leading artificial teeth...

Jeudi 07 septembre 2023

Quantité : 5000 - Prix : 0-100

Definition of aluminum die casting parts Aluminum alloy die casting is a kind of pressure casting part, which uses the die casting mechanical die casting machine to install the casting mould, and pours the heated liquid aluminum alloy into the feed port of the die casting machine...

Samedi 05 août 2023

Cas 8001-26-1 Flax Seed Oil/Linum Usitatissimum Seed Oil Linum usitatissimum linseed seed oil is extracted from the linseed by SFE-CO2 Extraction. Cas 8001-26-1 Linum usitatissimum oil is a triglyceride like other fats. Flaxseed oil is distinctive in the fatty acid composition of triglycerides...

Mercredi 26 juillet 2023

YiRui Metal can provide the service of magnesium die cast, provide the related magnesium alloy parts according to the customer's requirements, and also can produce to meet the customer's needs. Cold type magnesium alloy dies casting machine(Thixo) 250T/2 sets. 500t/2 sets , 1200t/2...

Mercredi 26 juillet 2023

The bright future of the magnesium market benefits from the transformation and level-up of China's automobile industry, like 3C and other industries. Among them, the lightweight meets the environmental protection needs, all the good things for the wide use of magnesium ingots, especially...

Samedi 15 juillet 2023

HTV quality or high-temperature vulcanized silicone rubber is used in the compression molding press. Special silicone rubber materials are chosen based on their intended use, whether they need to be fire, oil, or heat resistant. Food and medical qualities have FDA and BFR approvals...

Vendredi 14 juillet 2023

Quantité : 50 sets/mo - Prix : 11170-25133 USD

Vacuum hot press machine is used for the test parameters of the material properties, including the fluidity of composite materials, resin fluidity, and gel time. The composite material is formed after hot pressing and curing. The parameters of temperature and pressure in the hot pressing...

Mercredi 12 juillet 2023

Prix : 2.4-2.9$/kg

Description Description of Toothpaste Grade CMC The requirements of daily necessities are increasing constantly, with the improvement of people's living standards. As a kind of daily necessity, the value of Toothpaste is not limited to mouth cleaning and gradually becomes more functional...

Mercredi 12 juillet 2023

Prix : 2.4-2.9$/kg

What Is Stabiliser 466? Description Description of Food Grade CMC Sodium carboxymethyl cellulose (CMC/cellulose gum) is a kind of cellulose ether, that can easily be soluble in cold and hot water, with maximum yield, most widely and conveniently used among all cellulose products....

Mercredi 12 juillet 2023

Prix : 2.4-2.9$/kg

Sodium carboxymethyl cellulose gum (Na-CMC or cellulose gum) is the most widely used and most frequently used type of anionic cellulose ether. It is a white fibrous or granulated powder. Odorless, tasteless, non-toxic, hygroscopic, easily soluble in both hot and cold water, obtained...

Jeudi 06 juillet 2023

La baie d'açai contient des nutriments bénéfiques et des antioxydants, y compris des acides gras oméga-3 (acides gras essentiels, qui sont très importants pour la santé, mais le corps humain ne peut pas les produire efficacement), des acides aminés, des minéraux et des vitamines et...

Jeudi 29 juin 2023

Prix : $850~$2000 / ton

As defined by its main properties, copper offers excellent electrical and heat conductivity, and good corrosion resistance ability as well. But native copper is rarely to be used, it usually exists to be a copper-based alloy so that the other elements can help greatly reduce the casting defects...

Lundi 26 juin 2023

A dental impression is a mold removed from a tooth to diagnose and treat dental conditions. They are also used in forensic science. Impressions are also known as dental or dental casts. Usually, impressions are made in the dentist's office, although dentists may also travel to the...

Mercredi 07 juin 2023

Quantité : 1 ton

EGG YOLK LECITHIN CAS NO.: 93685 90 6 Emulsification efficacy of lecithin from egg yolk cas no.: 93685 90 6 is a critical factor to the quality of lipid emulsions. Better emulsification ability is an important basis for selecting egg yolk lecithin emulsifier in the development of lipid emulsions...

Mercredi 07 juin 2023

Quantité : 1 ton

EGG YOLK LECITHIN CAS NO.: 93685 90 6 Emulsification efficacy of lecithin from egg yolk cas no.: 93685 90 6 is a critical factor to the quality of lipid emulsions. Better emulsification ability is an important basis for selecting egg yolk lecithin emulsifier in the development of lipid emulsions...

Mercredi 07 juin 2023

Quantité : 1 ton

EGG YOLK LECITHIN CAS NO.: 93685 90 6 Emulsification efficacy of lecithin from egg yolk cas no.: 93685 90 6 is a critical factor to the quality of lipid emulsions. Better emulsification ability is an important basis for selecting egg yolk lecithin emulsifier in the development of lipid emulsions...

Mercredi 10 mai 2023

Product description: high-hardness (≥90A) TPU materials, with problems of abnormal glue, surface scratches, uneven bright fog, surface tingling, particles, etc, which are caused by excessive crystallization speed in the process of pipeline extrusion.While ATP's new series TPU can...

Vendredi 28 avril 2023

HTV quality or high-temperature vulcanized silicone rubber is used in the compression molding press. Special silicone rubber materials are chosen based on their intended use, whether they need to be fire, oil, or heat resistant. Food and medical qualities have FDA and BFR approvals...

Vendredi 28 avril 2023

Quantité : 1-50 tons - Prix : 1.7-3.5 usd/kg

With the improvement of people's living standards, more and more people pay attention to the quality of air and water. Air conditioners, water purifiers, air purifiers, car air purifiers, etc, hot melt glue types are increasingly used in people's lives. Hot melt adhesives are also...

Jeudi 13 avril 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

2K Molds The rotary mold is composed of two-cavity and core sides, the two core sides are the same, only the cavity sides is different which the second color cavity is bigger than the first color, at the beginning of injection molding, the barrel of the two-color injection molding...

Mercredi 12 avril 2023

Quantité : 1000t/m - Prix : 2-15 USD

Anmei focuses on the production of modified engineering plastics. We have polyamide PA66 modified products with properties of heat-resistant, reinforced, toughened, flame-retardant, wear-resistant, weather-resistant, oil-resistant and conductive. According to the characteristics...

Mercredi 12 avril 2023

Quantité : 1000t/m - Prix : 2-15 USD

Nylon66 PA66 Heat Stabilized Description Heat stabilized nylon PA66 a high temperature nylon made by the polycondensation of terephthalic acid and hexamethylene diamine. Heat stabilized nylon 6 has the properties of low water absorption, excellent heat resistance, good processing fluidity...

Samedi 08 avril 2023

Sand casting means the main material consisting of the mold is sand, and the melted metal fills the casting cavity only by its gravity. Generally, this method of making the casting products is so-called sand casting. There are several different kinds of sand applying to industrial...

Samedi 08 avril 2023

Prix : $0.50 - $4.00 / Kilo

Vitamin D3 protein powder is, in essence, micron yellow to yellow-brown particles with fluidity. It is easy to decompose and degrade after exposure to heat, light, or moisture. Saigao Nutri provides vitamin D3 powder bulk at great prices. Feel free to contact us for more information...

Vendredi 17 mars 2023

The Fischer-drop point wax are made from carbon monoxide and hydrogen in the presence of the selected catalyst. Generally, the feedstock is produced from coal or natural gas. The final synthetic waxes tend to be saturated, straight-chain hydrocarbons. Their very linear molecular structure...

Samedi 04 mars 2023

Consumer electronics is very popular in our daily life. It consists of many different plastic parts, pcb boards, wires, battery and some metal parts. To produce the plastic components of consumer electronics, we need manufacture the plastic injection molds first. Consumer electronics...

Vendredi 03 mars 2023

Quantité : 10t - Prix : USD1-1000

Linum usitatissimum seed oil is extracted from the linseed by SFE-CO2 Extraction. Cas 8001-26-1 Linum usitatissimum oil is a triglyceride like other fats. Flaxseed oil is distinctive in the fatty acid composition of triglycerides, which contains an unusually large amount of α-linolenic acid...

Mercredi 01 mars 2023

Prix : 1-10usd

Emulsification efficacy of lecithin from egg yolk cas no.: 93685 90 6 is a critical factor to the quality of lipid emulsions. Better emulsification ability is an important basis for selecting egg yolk lecithin emulsifier in the development of lipid emulsions. CAS NO.: 93685 90 6 EGG...

Mercredi 01 mars 2023

Prix : 1-10usd

Emulsification efficacy of lecithin from egg yolk cas no.: 93685 90 6 is a critical factor to the quality of lipid emulsions. Better emulsification ability is an important basis for selecting egg yolk lecithin emulsifier in the development of lipid emulsions. CAS NO.: 93685 90 6 EGG...

Samedi 25 février 2023

Quantité : 200kg - Prix : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Samedi 25 février 2023

Quantité : 200kg - Prix : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Samedi 25 février 2023

Quantité : 200kg - Prix : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Samedi 25 février 2023

Quantité : 200kg - Prix : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Samedi 25 février 2023

Quantité : 200kg - Prix : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Samedi 25 février 2023

Quantité : 200kg - Prix : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Samedi 25 février 2023

Quantité : 200kg - Prix : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Samedi 25 février 2023

Quantité : 200kg - Prix : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Samedi 25 février 2023

Quantité : 200kg - Prix : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Samedi 25 février 2023

Quantité : 200kg - Prix : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Samedi 25 février 2023

Quantité : 200kg - Prix : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Samedi 25 février 2023

Prix : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Samedi 25 février 2023

Quantité : 200kg - Prix : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Samedi 25 février 2023

Quantité : 200kg - Prix : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Samedi 25 février 2023

Quantité : 200kg - Prix : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Jeudi 23 février 2023

GA-9442/GA-9443 platinum rubber have good fluidity, suitable for high voltage injection molding, compression molding, or extrusion molding techniques to produce power cable accessories. GA-9440E cable rubber has good fluidity property, suitable for producing power electric cable accessories...

Jeudi 23 février 2023

The Influence Factors of the Resin Bond Diamond Tools The influence of binder mainly includes the influence of binder type and content, and so on. (1) The common characteristic of all kinds of resin bond diamond powder tools is poor heat resistance. In the process of processing workpiece...

Vendredi 03 février 2023

A vertical powder packing machine is equipped with automatic material level control, an optional dust suction device, a weight sorter, etc. Widely used in dry food, feed, chemical industry, additives, desiccants, and many other industries. The design of the whole detergent powder...

Dimanche 29 janvier 2023

The Fischer Tropsch wax, also called FT wax, with a high melting point (generally higher than 85°) is mainly composed of linear, saturated high-carbon alkanes with a relative molecular mass of 500-1000, which gives this chemical a fine crystal structure, high melting point, and narrow...

Samedi 21 janvier 2023

Description of Toothpaste Grade Carboxymethyl Cellulose Gum The requirements of daily necessities are increasing constantly, with the improvement of people's living standards. As a kind of daily necessity, the value of Toothpaste is not limited to mouth cleaning and gradually becomes...

Samedi 21 janvier 2023

What Is Stabiliser 466? Description of Food Grade CMC Sodium carboxymethyl cellulose (CMC/cellulose gum) is a kind of cellulose ether, that can easily be soluble in cold and hot water, with maximum yield, most widely and conveniently used among all cellulose products. The main raw...

Samedi 21 janvier 2023

Sodium carboxymethyl cellulose gum (Na-CMC or cellulose gum) is the most widely used and most frequently used type of anionic cellulose ether. It is a white fibrous or granulated powder. Odorless, tasteless, non-toxic, hygroscopic, easily soluble in both hot and cold water, obtained...

Mercredi 18 janvier 2023

Prix : 1-10usd

Silicone Rubber (HTV) HTV quality or high-temperature vulcanized silicone rubber is used in the compression molding press. Special silicone rubber materials are chosen based on their intended use, whether they need to be fire, oil, or heat resistant. Food and medical qualities have...

Samedi 14 janvier 2023

We can provide the service of magnesium die cast, provide the related magnesium alloy parts according to the customer's requirements, and also can produce to meets the customer's needs. INFORMATION OF MAGNESIUM ALLOY DIE CASTING Cold type magnesium alloy die casting machine(Thixo) 250T/2 sets...

Samedi 14 janvier 2023

The bright future of the magnesium market benefits from the transformation and level-up of China's automobile industry, like 3C and other industries. Among them, the lightweight meets the environmental protection needs, all the good things for the wide use of magnesium ingots, especially...

Samedi 14 janvier 2023

Quantité : 1-100 - Prix : USD 50000-5000000

Advanced agriculture process engineering machinical types of equipment, testing instruments, sophisticated manufacturing production technology in agriculture, and strict & perfect quality management system. Hongvadar agricultural product processing held the ISO9001 quality system...

Vendredi 13 janvier 2023

Prix : 100-400USD

Spiral Conveyor for Sale Screw conveyors are divided into two types: shaft screw conveyors and shaftless screw conveyors. They are divided into U-shaped screw conveyors and tube screw conveyors. Axle screw conveyors are suitable for non-adhesive dry powder materials and small particle...

Jeudi 12 janvier 2023

Quantité : 100000 pie

The piston axial pump is an important parts in the hydraulic system. It relies on the reciprocating motion of the piston in the cylinder block to change the volume of the sealed working cavity to achieve oil absorption and oil pressure. Piston pumps are generally divided into single piston pumps...

Jeudi 12 janvier 2023

Quantité : no limited - Prix : USD900-USD2000/MT

Classification of High Melting Point Polypropylene Wax Products: Plastic Additives Product Description: This product has the characteristics of high melting point, low melting degree, good lubricity, and dispersion. It is an excellent additive for polyolefin processing at present...

Jeudi 12 janvier 2023

Quantité : no limited - Prix : USD900-USD2000/MT

Lubricants improve the fluidity and demoulding of the resin. In processing, it reduces friction between resin and processing machinery, the friction between resin and resin, so that it reduces the torque to save the energy. Lubricants also increase the surface smoothness of the finished...

Vendredi 06 janvier 2023

Aluminum High Pressure Die Casting Mold When working at high or low temperatures, they also maintain good mechanical properties and have good corrosion resistance. properties and antioxidant properties. Die castings are widely used in construction, hardware, equipment, machine tools...

Mardi 13 décembre 2022

Quantité : 1kg - Prix : 8USD

Product Description GTSIL-P series silicones are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of applications...

Samedi 10 décembre 2022

Quantité : 200kg - Prix : 7.88USD

- Product description - GTSIL-P series silicones are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Samedi 10 décembre 2022

Quantité : 200kg - Prix : 7.88USD

- Product description - GTSIL-P series silicones are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Samedi 10 décembre 2022

Quantité : 200kg - Prix : 7.88USD

- Product description - GTSIL-P series silicones are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Samedi 10 décembre 2022

Quantité : 200kg - Prix : 7.88USD

- Product description - GTSIL-P series silicones are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Samedi 10 décembre 2022

Quantité : 200kg - Prix : 7.88USD

- Product description - GTSIL-P series silicones are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Samedi 10 décembre 2022

The name grey iron is because of the gray color of the fracture it forms, which is due to the presence of graphite. Grey iron is the most common and widely used casting material. Grey iron is so popular in engineering applications because of its relatively low cost and the properties...

Vendredi 09 décembre 2022

Product description Resin craft mold silicone are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be cast into the cured silicone molds : plaster, gypsum, concrete , wax...

Vendredi 09 décembre 2022

Quantité : 200kg - Prix : 7.88USD

- Product description - GTSIL-P series silicones are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Vendredi 09 décembre 2022

Quantité : 200kg - Prix : 7.88USD

- Product description - GTSIL-P series silicones are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Vendredi 09 décembre 2022

Anmei focuses on the production of modified engineering plastics. We have polyamide pa66 modified products with properties of heat-resistant, reinforced, toughened, flame-retardant, wear-resistant, weather-resistant, oil-resistant and conductive. According to the characteristics...

Mardi 08 novembre 2022

Injection-grade TPE Products Characterization: High fluidity. Soft-touch. Overmolding compatibility with TPE/PP/PE cable. Application TPE wire sheaths. Overmolding PP/PE. Stationery. Tool grip. Sporting equipment TPE injection guidance 1. Previous drying of the product 2 hours at 80℃ 2...

Mardi 18 octobre 2022

Quantité : 50 - Prix : 20000-90000

Our fully automatic flour packing machine is a fully automatic and multi-functional packaging machine, which is suitable for the full-automatic packaging of powder products in food, medicine and chemical industries. Such as: food additives, milk powder, soy milk, protein powder, Chinese...

Mardi 11 octobre 2022

Prix : $700-1100/MT

According to the different alumina content, our fused alumina can be divided into brown fused alumina, white fused alumina, pink fused alumina, black fused alumina, zirconia fused alumina etc. Different Types of Fused Alumina Brown Fused Alumina High bulk density, low iron, good crystallization...

Samedi 10 septembre 2022

Hot press vacuum press is used for the test parameters of the material properties, including the fluidity of composite materials, resin fluidity, and gel time. The composite material is formed after hot pressing and curing. The parameters of temperature and pressure in the hot pressing...

Samedi 27 août 2022

Freeze Dried Lychee Powder Freeze dried lychee powder is made from natural lychee fruits. Freeze dried lychee uses the most advanced plant extraction and vacuum freeze-drying technology in the world to maintain the color of lychee itself. The litchi powder is white-like fine powder...

Jeudi 25 août 2022

Freeze Dried Lychee Powder Freeze dried lychee powder is made from natural lychee fruits. Freeze dried lychee uses the most advanced plant extraction and vacuum freeze-drying technology in the world to maintain the color of lychee itself. The litchi powder is white-like fine powder...

Samedi 20 août 2022

Quantité : 5000 - Prix : 0-100

AUTOMOTIVE PARTS EMP Die Casting is a leading provider of custom aluminum die cast components for the automotive market. MACHINERY PARTS Used for agriculture, motorcycle, elevator, automation equipment, etc. TELECOM PARTS EMP manufactures die casting telecom housings in different...

Mardi 09 août 2022

Sand casting means the main material consisting of the mold is sand, and the melted metal fills the casting cavity only by its gravity. Generally, this method of making the casting products is so-called sand casting. There are several different kinds of sand applying to industrial...

Vendredi 29 juillet 2022

Prix : 100USD

GA-9442/GA-9443 cable silicone have good fluidity, suitable for high voltage injection molding, compression molding, or extrusion molding techniques to produce power cable accessories. GA-9440E cable rubber has good fluidity property, suitable for producing power electric cable accessories...

Mardi 26 juillet 2022

Cosmetic Tubes Wholesale Plastic empty cosmetic tubes is one of the most common cosmetic tube containers made of LDPE, HDPE, pp... etc. Products Description The structures of plastic tube are: Mono-layer, 2-layer, 3-layer and 5 layers. The diameter of plastic tubes are about: 13, 13...

Mardi 12 juillet 2022

Quantité : 1 carat - Prix : 0.06$/carat

- 金属结合剂微米金刚石 - 合成金刚石微米粉是由人造金刚石单晶经特殊加工而成的一种新型超硬超细磨料。 是硬质合金、陶瓷、宝石、光学玻璃等高硬度材料研磨抛光的理想原料。 用于各种行业的钻石中大约 90% 是合成制造的。 BRM-A / Blocky Series Micron Diamond Powder： Characteristics：Produced with premium grade MBD diamond as raw materials, high strength and grinding force, uniform and near-spherical...

Samedi 09 juillet 2022

PC-ABS is a blend of PC and ABS. If the two materials are simply mixed and then injected directly, the effect is very poor, and delamination will occur. The advantages of PC are rigidity and toughness, but the disadvantages are stress cracking and high viscosity. The advantage of...

Samedi 09 juillet 2022

Quantité : 50 units/m - Prix : 80,000~180,000

Hot press vacuum press is used for the test parameters of the material properties, including the fluidity of composite materials, resin fluidity, and gel time. The composite material is formed after hot pressing and curing. The parameters of temperature and pressure in the hot pressing...

Jeudi 07 juillet 2022

HTV quality or high-temperature vulcanized silicone rubber is used in the compression molding press. Special silicone rubber materials are chosen based on their intended use, whether they need to be fire, oil, or heat resistant. Food and medical qualities have FDA and BFR approvals...

Vendredi 24 juin 2022

Toothpaste Grade Carboxymethyl Cellulose Description of cellulose gum toothpaste The requirements of daily necessities are increasing constantly, with the improvement of people's living standards. As a kind of daily necessity, the value of Toothpaste is not limited to mouth cleaning...

Vendredi 24 juin 2022

Food Grade Carboxymethyl Cellulose Description of Food Grade CMC Sodium carboxymethyl cellulose (CMC/cellulose gum) is a kind of cellulose ether, can easily soluble in cold and hot water, with maximum yield, most widely and conveniently used among all cellulose products. The main...

Vendredi 24 juin 2022

Sodium carboxymethyl cellulose (Na-CMC or cellulose gum) is the most widely used and most frequently used type of anionic cellulose ether. It is a white fibrous or granulated powder. Odorless, tasteless, non-toxic, hygroscopic, easily soluble in both hot and cold water, obtained by...

Mardi 21 juin 2022

The rotary mold is composed of two-cavity and core sides, the two core sides are the same, only the cavity sides is different which the second color cavity is bigger than the first color, at the beginning of injection molding, the barrel of the two-color injection molding machine...

Jeudi 09 juin 2022

HVD-FBD-P series boiling fluidized bed dryer takes air heated by the heat exchanger to form hot air which is distributed into the main engine through valve plate, and the loose wet material is transferred into the fbd dryer from the feeder. Due to the effect of wind pressure, the...

Mercredi 18 mai 2022

Quantité : 15000 piec - Prix : $5-100

It' s extracted from the linseed by SFE-CO2 Extraction. Linum usitatissimum oil is a triglyceride like other fats. Flaxseed oil bulk is distinctive in the fatty acid composition of triglycerides, which contains an unusually large amount of α-linolenic acid, which has a unique response...

Jeudi 07 avril 2022

Quantité : 1-100 - Prix : USD 50000-5000000

Advanced crop process engineering machinical types of equipment, testing instruments, sophisticated manufacturing production technology in agriculture, and strict & perfect quality management system. Hongvadar agricultural product processing held the ISO9001 quality system certification...

Mardi 29 mars 2022

The name grey iron is because of the gray color of the fracture it forms, which is due to the presence of graphite. Grey iron die casting is the most common and widely used casting material. Grey iron is so popular in engineering applications because of its relatively low cost and...

Mardi 29 mars 2022

The industrial bucket elevator has the advantages of large conveying volume, high lifting height, stable and reliable operation, and long life. The main performance and parameters of our industrial bucket elevator conform to JB3926---85 "Vertical Bucket Elevator" (this standard is...)

Vendredi 25 mars 2022

Description of cmc toothpaste grade The requirements of daily necessities are increasing constantly, with the improvement of people's living standards. As a kind of daily necessity, the value of Toothpaste is not limited to mouth cleaning and gradually becomes more functional and healthy...

Vendredi 25 mars 2022

What Is CMC Food Additive Sodium carboxymethyl cellulose food grade (CMC/cellulose gum) is a kind of cellulose ether, can easily soluble in cold and hot water, with maximum yield, most widely and conveniently used among all cellulose products. The main raw material of CMC is refined...