BONDED - 843 Annonces

Friday 10 June 2022

Clad Steel Definition 0.8 Series CCS Round Wire Origin of new material development 0.8mm series copper-clad round wire is a new type of material developed by our Company to replace pure copper. Because it has the advantages of high strength, low price, high corrosion resistance and...

Tuesday 31 May 2022

Magnetic materials can produce magnetic fields, which generate forces attracting or repelling ferromagnetic materials and other magnets. Magnetic material can be divided into soft and hard magnets. Soft magnets are those materials easy to magnetize and demagnetize, while hard magnets...

Saturday 28 May 2022

Hybrid Bonded Magnetic Compounds Introductions： By mixing different kinds of magnetic powder in different proportions, we can obtain a series of hybrid magnets whose magnetic properties are higher than ferrite bonding magnet and lower than bonded neodymium (anisotropic) magnet, which...

Saturday 28 May 2022

High-density plastic has a density of up to 13g/cm3 by adding high-density powder to the plastic matrix, which is higher than that of ordinary metal. It can be used as a shielding enclosure for high-energy rays, counterweight material, substitute material for lead, etc. Properties...

Saturday 28 May 2022

Magnets and magnet assemblies have to meet increasingly complex requirements. Hard-Ferrite Bonded Magnetic Compounds Compared to rare earth magnetic materials, hard ferrites has obvious cost advantage due to the use of cheap strontium oxide, barium oxide and iron oxide as raw materials...

Saturday 28 May 2022

Light density and low cost of ferrite bonded magnetic compounds (hard ferrites magnets) create a high-cost performance. Therefore, it has the largest market demand and is the most extensively used in the field of modern home appliances, office supplies, communication devices, and defense...

Saturday 28 May 2022

Introduction SmFeN magnetic material uses abundant rare-earth Sm element instead of expensive elements of Nd, Dy, Co, etc, and is the most cost-effective rare earth permanent magnetic material. Compared with the bonded neodymium magnet, the bonded SmFeN magnet has higher magnetic...

Saturday 28 May 2022

Bonded Neodymium Magnetic Compounds Introductions Bonded neodymium magnets (bonded NdFeB magnet) has high mechanical performance and no need for surface coating and other processes, which can effectively avoid the shortcomings of brittle and poor corrosion resistance of sintered NdFeB magnet...

Wednesday 18 May 2022

Paper thin neodymium magnets (also called ndfeb rubber magnets, Neo magnets) are consisted of Nd (neodymium), Fe (Ferrum), B (boron), and other elements like Dy (dysprosium) and Ti (Titanium). As part of the super strong permanent magnets family, they are the latest generation of...

Wednesday 18 May 2022

Acrylic resin has high hardness, full coating film, good heat resistance, water resistance, solvent resistance, chemical resistance, and good weather resistance, good gloss and color retention. Acrylic coatings are mainly used for topcoats with high decorative and high weather resistance...

Saturday 14 May 2022

Double side polyester tape is made by coating silicone pressure-sensitive adhesive on both sides of the green PET substrate, and then compounding it with easy-to-peel release liner. The total thickness (100um±5um), can withstand repeated changes of low and high temperature (-30℃-230℃)...

Friday 06 May 2022

A single die is generally composed of one or more concave dies and a convex dies, which refers to completing the process in a stamping stroke only in one station. Orienson's Single Die A single mould can be divided into single punch press, bending die, drawing die, plunging die, and integral die...

Saturday 30 April 2022

Quantité : 5000 sets - Prix : USD5,000.00-USD3,000

The rockwool sandwich panel machine and its production process realize that the rockwool and steel plate can be combined into a whole through automated equipment in the factory, which changes the previous way that rockwool panels should be machined on site. Under the premise of meeting...

Wednesday 20 April 2022

Quantité : 500000 Pie - Prix : US $1 - 3,000 / Set

Features of single orifice air release valve Can be a large amount of exhaust, improve water efficiency pump Can be a small amount of exhaust, make sure the pipe is full of water; Interface with filter screen, filter impurities, long life; Float ball is made of SS304, resistant to corrosion...

Wednesday 20 April 2022

Quantité : 500000 Pie - Prix : US $1 - 3,000 / Set

Features of resilient seated valve Full diameter flat - bottom runner, no debris pooling; Fully covered EPDM disc, no corrosion; Movable disc's nut, adaptive offset; The variable pressure change O-Ring. Resilient Seated Gate Valve Working Principle The main seal is entirely rubber covered gate...

Wednesday 20 April 2022

Quantité : 500000 Pie - Prix : US $1 - 3,000 / Set

Festures of pump flow control valve Slow closing effectively prevents water hammer. Stop pump stable and save energy Full port, small fluid resistance Completely Automatic Operation Pump Control Valve Working Principle When the pump is started, the solenoid pilot valve is fully opened...

Wednesday 20 April 2022

Quantité : 500000 Pie - Prix : US $1 - 3,000 / Set

Festures of Pressure Relief Valve Accurate Pressure Control Fast Opening to Maintain Line Pressure Slow Closing to Prevents Surges Completely Automatic Operation Pressure Relief Valve Working Principle Inlet pressure water enters the lower cavity of the pilot valve diaphragm from...

Wednesday 20 April 2022

Quantité : 500000 Pie - Prix : US $1 - 3,000 / Set

Festures of pressure reducing valves for fire protection service Sensitive and accurate pressure control Adjustable static pressure and dynamic pressure Outlet pressure does not fluctuate with inlet pressure Full port, small fluid resistance Fire Pressure Reducing Valve Working Principle...

Wednesday 20 April 2022

FULUO provides different types of medical tape for different application like tubing, needling, fixing all kinds of dressings or bandages and so on. Their medical tape with holes features are the following: Low allergenic and hypoallergenic adhesive Nontoxic, Latex-free, low allergenic...

Tuesday 12 April 2022

Prix : 100USD

Exothermic Welding Mould FAQ Copper-plated Grounding Rod and Grounding Copper Clad Earth Rod How to Prepare High Conductivity Copper What is the purpose of a grounding rod I Thermit The Benefits of Grounding Lon Grounding Rod Conductive Silver Paste What is copper bonded ground rod...

Saturday 09 April 2022

All waterproof neodymium (NdFeB) magnets china under this category are completely made with rubber coated. Rubber coated neodymium(NdFeB） magnets have high durability and high friction. The rubber coating protects the neodymium magnet from debris and liquid contact.So rubber covered...)

Thursday 07 April 2022

Quantité : 100-100000

Product characteristics 1. LED colors: Red, Green, Yellow, White, Blue, Orange, Duo-colors LEDs 2. LED size：0603，0805，1206，020 3. LED brand： Kingbright, Every light 4. Little heat, low-cost, used for the outdoor environment Can be bonded into Polyester or FPC As one of the most...

Thursday 07 April 2022

Quantité : 100-100000

What is Cable Harness A wiring looms and harnesses also referred to as a wire harness, wiring assembly, cable assembly or wiring loom, is an assembly of electrical cables or wires which transmit signals or electrical power. The cables are bonded together with a durable material such as vinyl...

Saturday 26 March 2022

As a new material, soft magnetic compound can be used for extrusion or injection molding and are especially suitable for high-frequency high-speed stator, 5G base station, transformer skeleton applications, it is helpful for the device to be small and lightweight, to reduce energy...

Saturday 26 March 2022

High density and metal bonded plastic functional composite materials with complex and delicate structures can also be prepared by the injection molding process. Density can be adjusted as required from 2-13 g/cm3, which can replace some traditional aluminum alloy, zinc alloy, stainless steel...

Saturday 26 March 2022

We can provide customers with appropriate mold design scheme (magnetic circuit design and mold-flow analysis) and optimization processing parameter based on the material characteristics to obtain the best performance of the material, we also cooperate with our customer to analyze...

Saturday 26 March 2022

Hybrid Bonded Magnetic Compounds Introductions： By mixing different kinds of magnetic powder in different proportions, we can obtain a series of hybrid magnets whose magnetic properties are higher than ferrite bonding magnet and lower than bonded neodymium (anisotropic) magnet,...

Saturday 26 March 2022

High-density plastic has a density of up to 13g/cm3 by adding high-density powder to the plastic matrix, which is higher than that of ordinary metal. It can be used as a shielding enclosure for high-energy rays, counterweight material, substitute material for lead, etc. Properties...

Tuesday 15 March 2022

Quantité : 10w - Prix : 1~100usd

Spray foam gun In the process of spraying materials, spray foam gun is essential. The spray gun foam needs to mix the material quickly during the spraying process, which needs to be done at a very fast speed, because the bonded material begins to harden immediately. Therefore, no...

Wednesday 09 March 2022

Water Resistant Disposable Bed Sheet NBI Canuxi disposable sheets for hospital roll made of nonwoven fabric with precut line, absorbent, strong and reliable, non-woven material, doesn't crinkle or sound like paper, latex-free, keep surface clean. Specification of Disposable Bedsheet...