TOOLINGS - 829 Annonces

Tuesday 31 October 2023

Prix : 10 000,00 €

With the continuous demand for automobile engine mounts in the market, the independent research and development of engine mount filling equipment in China entered into a period of rapid development. But the traditional filling production equipment is not only heavy, but also expensive...

Friday 27 October 2023

Prix : 100USD

The injection molding part is replacing metal products in many fields of industrial applications to meet the requirement of lightweight industrial equipment and cost-reduction. Green Vitality has accumulated many experiences over the years in providing a full spectrum of services...

Friday 27 October 2023

Prix : 100USD

With the vigorous development of the automotive industry, plastic auto parts mould is also developing rapidly. 90% of car parts mould are produced by injection mold, which is a huge market opportunity for plastic automotive parts mold manufacturers. Common large-size car part mold...

Friday 27 October 2023

Prix : 100USD

GV Mold has rich experience in home appliance molds (such as television, refrigerators, fans, washing machines, air conditioners, and various smart home appliances). We can provide turnkey solutions for high-precision houseware mould according to customers' ideas, from raw material...

Friday 27 October 2023

Large Part Machining Large part CNC machining service involving the part size up to 1.0 x 0.8M machinig capacity for tooling making and prototype manufacturing of mechanicl part. Notwithstanding the high degree of skill and knowledge required for all fabrication and machining processes...

Friday 27 October 2023

Injection Molding Over 20 years in China prototype precision plastic injection mold design services covering wide range of plastic injection molding technology for electronic, cosmetic, food & medical, household and industrial products with engineering assistance and an intensive...

Friday 27 October 2023

CNC EDM Electrical discharge machining, sometimes referred to as spark machining, spark eroding, die sinking, wire burning, or wire erosion, is a metal production technique that uses electrical discharges to carve out the required shape. The CNC EDM machining service is provided for...

Friday 27 October 2023

5 Axis CNC Machining 5 axis custom CNC machining service provided for the manufacturing of complicated geometrical parts for both metal and plastic. 5-axis One of the most cutting-edge methods accessible now is CNC machining. It uses subtractive machining to give part production...

Thursday 26 October 2023

Quantité : 4000 pcs/m - Prix : 200-1000000

Single row tapered roller bearing as the most widely used tapered roller bearings consist of one outer ring, and one inner ring unit. The inner ring unit includes one inner ring, one group of tapered rollers and a cage. In ZWA's same type single row tapered roller bearings,both inner...

Thursday 26 October 2023

Quantité : 4000 pcs/m - Prix : 200-1000000

Full complement cylindrical roller bearing is a kind of cylindrical roller bearing designed without cages. In this design, the number of rollers are the biggest in all the bearings types. This kind of bearing is designed to bear heavy load. In the same width, compared with traditional...

Thursday 26 October 2023

We provide custom made plastic parts-Sliders, inserts, lifters, blocks, ejector pins, and other mold components for our worldwide clients in 3 days via DHL or TNT. We are able to manufacture custom made plastic parts(Mold slider, lifters, Mold inserts, Core and cavity, blocks, ejector...)

Thursday 26 October 2023

For more than 15 years, Packson Mold has become an excellent manufacturer that is enabled to make parts with high tonnage and large size thanks to our one-stop facility. We are keen to meet your injection molding needs with single and convenient sources. Thanks to our advanced equipment...

Saturday 21 October 2023

Atlas metal manufactures high-quality precision shaft, available off-the-shelf or made to your exact needs. Atlas metal offers you all kinds of precision machining, milling, tapping and drilling in aluminum, stainless steel, steel alloys, and titanium. Types of Precision Shaft Fan...

Saturday 21 October 2023

China 5083 Aluminum Plate The main alloying element of 5083 aluminum plate is magnesium, which is a professional anti-rust aluminium and aluminium plate. Application of aluminium tooling plate 5083 The board can be used to manufacture aircraft fuel tanks, oil , and sheet metal parts...

Monday 09 October 2023

5 axis vertical machining center is a high-end 5-axis linkage machine tool that developed after taking in the German advanced technology. VMC 5 axis machine features high efficiency, high accuracy, high flexibility. Five axis VMC machine can continuously finish drilling, boring, reaming...

Monday 09 October 2023

600*600mm large cross-section ram of 5 Axis CNC gantry type machining center to ensure that even when the ram is overhung, the gantry CNC 5 axis gantry type machining center maintains strong cutting rigidity. X/Y axes are each equipped with 4 roller-type linear guides, equipped with...

Monday 09 October 2023

Two shot moulding, also calleddouble shot injection molding, double shot moulding , multi shot injection molding or 2k injection moulding is one category of injection molding using two different thermoplastic materials to produce injection molded parts in two colors or two components...

Monday 09 October 2023

Keyplast has efficient team with many years' experience of injection moulding, while medical industry is one of our mainly focused industries. With our deep insight into the medical injection moulding industry, MacroMedics approaches to Keyplast for injection moulding service in the...

Monday 09 October 2023

Ⅰ. ABS Injection Molding Processing Performance (1) Because of the strong moisture absorption as well as high water content of ABS, the plastic parts that are made of ABS have low gloss and poor internal quality. As a result, ABS injection molding should be dried so that the water...

Friday 29 September 2023

Prix : 100USD

ETCN offers a quality CNC me metal folding/bending press after laser cutting which is used for the base of the compressor motor. Different types of metal bending are available to our clients and meet their satisfaction, like bending stainless steel plate, bending 6061 aluminum sheet...

Friday 29 September 2023

MIM stand for metal injection molding china, it's a forming method of a metal parts and can provide a nearly unlimited shape, geometric-feature capability, high-production rates through the use of multi-cavity tooling. Compared with conventional technology like press sintered and CNC...

Friday 29 September 2023

Prix : 100USD

As a professional auto CNC machining ltd company, we can supply a high-quality level of CNC automation solution and parts for the production of all-in-one clamping devices, gripper, conveyor line, turntable, and other types of automation fixture/tooling/automatic welding. Now the...

Wednesday 27 September 2023

Our plastic injection moulding process produces custom - rapid prototypes and end-use production parts in 15 days or less. We use aluminium moulds that offer cost-efficient tooling and accelerated manufacturing cycles, and stock more than 100 different thermoplastic resins. As a precision...

Wednesday 27 September 2023

Prix : 200,000 USD~1,500,00

Tool Steel Additive Manufacturing Maraging Steel is an ideal material for many industries, like tooling industries. Eplus3D's maraging steel powders include 18Ni300/1.2709 and 13Ni400. These powders have been tested for use on Eplus3D's 3d metal printer. Eplus3D also offers a wide...

Wednesday 27 September 2023

Prix : 200,000 USD~1,500,00

EP-A650 3D Metal Printer Stereo Lithography is developed by Eplus3D, which is professional in 3D EP printing technology. The system is user-friendly with high stability, care-free maintenance, and perfect printing results. Feel free to reach out to us to learn more details about the...

Tuesday 12 September 2023

Metal Welding Service Welding is a manufacturing process and technology to join metals or other thermoplastic materials such as plastics by heating, high temperature or high pressure. There are many types of welding. TIG(Tungsten Inert Gas), MIG (Metal, Inert Gas), GMAW (Metal, Gas Arc Welding)...

Tuesday 12 September 2023

Stamping is a cold stamping process, which is to cut, bend or shape the material into the finished shape and size in accordance with the mold with the punching force from the stamping machine. As one of the leading China stamping metalworking suppliers , Hunkmachining provides varied...

Saturday 09 September 2023

The injection molding part is replacing metal products in many fields of industrial applications to meet the requirement of lightweight industrial equipment and cost-reduction. Green Vitality has accumulated many experiences over the years in providing a full spectrum of services...

Wednesday 06 September 2023

As one of the established switch and socket manufacturers, FUTINA switch and socket are developing with decades of manufacturing experience, superior-quality raw materials and complete products range. Keep providing the best wiring device solution. Buy switches and sockets at FUTINA...

Saturday 02 September 2023

Quantité : 200 sets/m - Prix : 6893-27573 USD

The main transmission of servo turret punching machine is directly from drive servo punch press, which retains the advantage of a simple and reliable structure as mechanical transmission, it features high efficiency, energy saving, low noise, high accuracy, and can realize many...

Wednesday 30 August 2023

The injection molding part is replacing metal products in many fields of industrial applications to meet the requirement of lightweight industrial equipment and cost-reduction. Green Vitality has accumulated many experiences over the years in providing a full spectrum of services...

Wednesday 30 August 2023

One computer mouse usually includes these plastic parts: a bottom shell, an upper cover, a middle cover, a wheel, a base of wheel, a frame which connects with electronic elements etc. These plastic parts are required not only to be textured well, but also to be wear-resistant. In addition...

Wednesday 30 August 2023

GV Mold has rich experience in home appliance molds (such as television, refrigerators, fans, washing machines, air conditioners, and various smart home appliances). We can provide turnkey solutions for high-precision houseware moulds according to customers' ideas, from raw material...

Wednesday 30 August 2023

M8 sensor cable is waterproof grade IP68, pins, and holes are gold-plated terminals, stable conductive performance, safe and reliable; Reduces loss when passing through the patch, and the M8 4 Pin cable is not easy to oxidize. M8 4 Pin Cable Specification M8 Sensor Cable Advantages...

Thursday 24 August 2023

The injection molding part is replacing metal products in many fields of industrial applications to meet the requirement of lightweight industrial equipment and cost-reduction. Green Vitality has accumulated many experiences over the years in providing a full spectrum of services...

Thursday 24 August 2023

One computer mouse usually includes these plastic parts: a bottom shell, an upper cover, a middle cover, a wheel, a base of wheel, a frame which connects with electronic elements etc. These plastic parts are required not only to be textured well, but also to be wear-resistant. In addition...

Thursday 24 August 2023

GV Mold has rich experience in home appliance molds (such as television, refrigerators, fans, washing machines, air conditioners, and various smart home appliances). We can provide turnkey solutions for high-precision houseware moulds according to customers' ideas, from raw material...

Wednesday 23 August 2023

A connector mold, also known as a connector tooling, is a type of injection mold that is specifically designed to produce connectors or cable assembly components. Connectors are widely used in different industries, such as telecommunications, automotive, consumer electronics, and many others...

Wednesday 23 August 2023

Model No. CUCW-N142 is a self-designed, tested, and certificated unitized curtain walling system by CAS team. It is a cost efficient and performance unitised curtain wall system, which combines minimal aesthetics with structural stability. Its structural silicone glazing construction...

Tuesday 22 August 2023

Custom machining cnc is the abbreviation of "computer numerical control", custom cnc machining service is a kind of manufacturing process that instructs the operation of equipment and tools through programmed computer. This process can control various complicated machinery, such as...

Tuesday 22 August 2023

Box build assembly china services, known as systems integration, can be anything from a simple printed circuit board assembly housed in a small enclosure, to a cabinet housing a complex electromechanical system. Box build assembly involves everything including design, production and construction...

Friday 18 August 2023

Swiss machining is a specialized type of precision machining that involves the use of a sliding headstock lathe to produce intricate parts with high accuracy and tight tolerances. This process is particularly well-suited for small, complex parts that require multiple operations...

Tuesday 08 August 2023

Prix : 2.8-3.2USD

Plastic molds are tools that are matched with plastic mold making machines in the plastic processing industry to give plastic products a complete configuration and precise dimensions. Due to the wide variety of plastics and processing methods, and the complex and simple structures...

Tuesday 08 August 2023

Prix : 2.8-3.2USD

As a china abs molding supplier, Keyplast has leading advantages in custom plastic molding industry, with rapid quotation, professional design, efficient processing, regular feedback, strict quality-control and automatic packaging. For prototyping, we provide professional suggestions...

Tuesday 08 August 2023

Prix : 2.8-3.2USD

What is plastic injection molding? Plastic Injection molding is a molding method that combines injection and molding. The advantages of plastic small scale injection molding method are fast production speed, high efficiency, operation can be automated, variety of colors, shapes can...

Tuesday 08 August 2023

Prix : 2.8-3.2USD

Insert molding service is one category of injection molding that allows preformed parts or components, usually metal inserts, to be inserted into the plastic molded parts and to have a final product in one-step process. Insert moulding has characteristics as below: A combination of two parts...

Tuesday 08 August 2023

Prix : 2.8-3.2USD

Plastic Injection Molding Plastic Injection Molding Plastic injection moulding is a method of making plastic products. The molten plastic is injected into the mold by pressure, and then cooled and molded to obtain various plastic parts. There are mechanical injection molding machines...

Tuesday 08 August 2023

Prix : 2.8-3.2USD

Injection mold design engineering is a procedure at the first stage of injection molding process, which develops the injection mold designs to improve the effectiveness and efficiency in injection molding. Plastic mold design technical team of R&D and engineers of Keyplast is...

Tuesday 08 August 2023

Quantité : 1K - Prix : 1-1000000usd

We manufacture high-precision parts for customers around the world for virtually all advanced technology manufacturing industries, such as communications, computers, automobiles, cell phones, electronic components, tooling parts, and aerospace. One can get a large range of precision...

Sunday 06 August 2023

Quantité : 60 - Prix : 5 000,00 €

Lorsque vous commencez le moulage par injection plastique en Chine, l'usine de moules Hanjin est le premier choix, en tant que fabricant de moules d'injection plastique en Chine, nous offrons un service complet de la conception de moules d'injection, la fabrication de moules à la...

Sunday 06 August 2023

Quantité : 720 - Prix : 3 000,00 €

Usine de fabrication de moules d'injection pour les produits en plastique moulés par injection personnalisés Hanjin Mold dispose d'une série d'équipements de pointe, y compris la machine CNC FANUC, la machine à étincelles électrique sodik, la machine de découpe de fil sodik, la rectifieuse...

Friday 04 August 2023

Prix : USD 2500/T to USD 35

Standard aluminium extrusion profiles are also called general profiles or standard profiles. Otalum produces a wide range of standard aluminum profiles with different dimensions in the following groups: Angle, Bar, Tubes, U-channel. All profiles are produced according to the standard GB5237...

Wednesday 02 August 2023

Prix : 100000-500000USD

The traditional low-bed trailer can not meet the demand of long cargo transportation in many cases. As required, we design the extended flatbed trailer according to different lengths of cargo. The cargo loading platform can be extended and retracted freely. Forced steering is the...

Saturday 29 July 2023

Silicone rubber is a kind of elastic material, which is widely used in industry and family. It has become an important part of our life. Meanwhile, silicone moldings are becoming more and more important in the world because it is widely used in a variety of industries like medical...

Saturday 29 July 2023

At Packson, we specialize in manufacturing custom precision mold components and machined parts that meet or exceed international quality standards, including ISO 9001 and 13485. Our team is dedicated to building custom, durable, high-quality precision mold parts with the spirit of craftsmanship...

Saturday 29 July 2023

Overmolding mold is made of molding over molding process which is a special injection molding process that can combine various materials into a single part. Through mechanical and/or chemical bonding of two plastic materials, the overmolding injection molding process can be used to...

Saturday 29 July 2023

Multi cavity mould is an injection mold that has more than one cavity. The shape of each cavity is the same. Multi cavity mold design is to produce multiples of the same part for high volume production since it means each production will produce a large number of finished parts. Multi...

Thursday 27 July 2023

In recent years, with the rapid development of die and mould industry, graphite materials, new processes and increasing die and mould factories are constantly impacting the die and mould market. Graphite has gradually become the preferred material for die and mould production with...

Thursday 27 July 2023

Graphite jewelry molds make original designs of graphite crucibles attached to them for a long time, which keeps high-temperature resistance. Making graphite molds for jewelry is the procedure used to insure that jewelry items can be accurately duplicated at any time future. The mold...

Thursday 27 July 2023

E-Grind has developed PG wheels for precision grinding in Electronic mold industry. E-Grind wheels are peferct suitable for slotting, grooving and profiling carbide & HSS workpieces to offer highly precision dimensions and shapes. For precision grinding of molds, E-Grind use...

Wednesday 26 July 2023

This shape of a mold is predetermined by a mould, a block that has been hollowed out. Aluminum, steel, alloys, and copper are the most common materials used to build it. It's made up of various other precision mold parts, too. Our mold spare parts include lifters and ejectors as well...

Wednesday 26 July 2023

We stock a line of plastic moulded products including well over 200 components for dialysis. We continue to innovate with new product designs and discoveries year after year. Contact Us to request access to our products catalog with pricing and a way to order. DETAIL OF FINAL PLASTIC...

Wednesday 26 July 2023

GMC series gantry mill for sale is the latest precision gantry boring and milling machining center jointly developed by Germany and DEED. The machine tool of gantry type machining center can complete milling, boring, drilling, rigid tapping, and three-axis linkage surface processing...

Saturday 22 July 2023

Prix : 1dollar-15dollar

Adapter is one of the most important part of G.E.T system, especially the cast lip system. Either made by casting or forging, an adaptor installed between the lip and the tooth. It's nose and pocket support the main structure. WALKSON mainly focus on providing big size cast adaptors...

Saturday 22 July 2023

Quantité : 30 sets of - Prix : $1,000-$10,000

CNC Components Gmmoldtech CNC component can greatly reduces the number of tooling, and complex tooling is not needed to process complex parts. If we want to change the shape and size of the parts, we only need to modify the processing program of the parts, which is suitable for...

Saturday 22 July 2023

Quantité : 30 sets of - Prix : $1,000-$10,000

CNC Components Gmmoldtech CNC component can greatly reduces the number of tooling, and complex tooling is not needed to process complex parts. If we want to change the shape and size of the parts, we only need to modify the processing program of the parts, which is suitable for the...

Saturday 22 July 2023

Tools, Locks, Small Appliances MIM China is a repeatable process for complex components made from high-temperature alloys. MIM parts are near fully dense, which provides excellent mechanical, magnetic, corrosion, and hermetic sealing properties, and allows secondary operations like plating...

Saturday 22 July 2023

Smart Key MIM stand for Metal Injection Molding, it's a forming method of a metal parts and can provide a nearly unlimited shape, geometric-feature capability, high-production rates through the use of multi-cavity tooling. Compared with conventional technology like press sintered and CNC...

Saturday 22 July 2023

Small Hardware MIM stand for metal injection molding china, it's a forming method of a metal parts and can provide a nearly unlimited shape, geometric-feature capability, high-production rates through the use of multi-cavity tooling. Compared with conventional technology like press...

Friday 21 July 2023

Based on the processing and manufacturing industry, continuous improvement and growth; The main businesses are small CNC and medium-sized CNC precision machining, CNC prototype machining, precision CNC machining parts manufacturing, CNC automation equipment parts processing, machine...

Friday 21 July 2023

As a leading China 4 &5 axis CNC machining manufacturer, Richconn understand the importance of offering cutting-edge technologies to meet diverse industry needs. Our expertise in CNC axis types enables us to tackle complex projects with ease, ensuring superior dimensional accuracy...

Tuesday 18 July 2023

- Copper Stamping - Description: Copper stamping is a specialized form of precision metal stamping that focuses on shaping and forming components using copper sheets. Copper, known for its excellent electrical conductivity, thermal conductivity, and corrosion resistance, is widely...

Friday 14 July 2023

Quantité : 50 sets/mo - Prix : 11170-25133 USD

This servo electric press china is a high-end CNC drilling machine for panel furniture, which has the advantages of high processing efficiency and a high degree of automation. The electric servo mechanical press can realize six-sided position processing and front and back groove processing...

Friday 14 July 2023

Quantité : 50 sets/mo - Prix : 11170-25133 USD

The system is a servo electric cylinder, which is self-developed by Tianyu. Adopting the servo electric cylinders for sale as the driving force converts the rotary motion of the servo motor into linear motion. At the same time, the best advantages of the servo motor: precise speed control...

Friday 14 July 2023

Quantité : 50 sets/mo - Prix : 11170-25133 USD

TY502 china four column hydraulic press machine is the equipment independently developed by Tianyu Machinery Equipment Co., Ltd. It can detect whether the interference between components is fully in line with the design to prevent the products with unqualified fit clearance from...

Friday 14 July 2023

PA6 FR is a PA6 with 30% glass-fibers and flame retardant free of halogens. Typical Application of PA6 GF30 halogen-free FR (A1015F) PA 6 GF30 flame retardant free of halogens has achieved full coverage from electronic&electrical fields to the industrial, commodity consumer market...

Friday 14 July 2023

PA6 GF30 FR is a PA6 with 30% glass-fibers and halogens flame retardant. PA 6 GF30 Halogenated FR Features Glass fiber reinforced 30% PA66 PA6 Density(g/cm3) 1.12-1.14 1.38 Water absorption(%) 1.3-1.9 1 Surface hardness M100 M100 Shrinkage(%) 0.5 0.4 Continuous heat...

Friday 14 July 2023

PA6 GF 20 has 20% glass fiber filler. It has much greater heat-resistant mechanical properties than unfilled polyamide. Anmeiplastics has always been producing reliable PA6 GF20 products for many years. We can provide you with the best chemical material. If you need high-quality PA6 GF20...

Friday 14 July 2023

PA6 15GF with high tensile strength is made by 15% glass fiber reinforced, toughened, polyamide 6 resin for injection molding. Typical Application of PA6 GF15 with high tensile strength (A1307C) PA6 with 15% glass fiber toughened plastics, due to its excellent properties, good appearance...

Friday 14 July 2023

PA66GF50 is a fiber-reinforced plastic made of Nylon 66 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing aids be added to be used in injection molding products. Typical Application of PA66 GF50 (A2011J) PA 6.6 GF50 HB grade is applied...

Friday 14 July 2023

Prix : 10 000,00 €

Well designed by engineers at Hangzhou Roll Forming Technology, this series of cable punching machines can produce rolling cable tray and caps from 50-350mm. Our perforated cable tray roll forming china machine can conduct fast and easy operations between different sizes on the cable...

Wednesday 12 July 2023

Pharmaceutical Packaging Manufacturing As a professional pharma packaging company, Gongdong in the research and exploration in the field of disposable medical consumables and drug packaging materials more than 30 years, on the basis of the digital factory, make full use of the Internet...

Friday 07 July 2023

Quantité : 500tons - Prix : USD0.015-----USD100

The rubber-coated mounting magnets with internal(female) threaded stem/bushing(shorted as internal thread rubber-coated mounting magnets) offer magnetic bases for waterproof magnetic ceiling hooks and rustproof holding magnets for outdoor use. All the internal thread rubber-coated...

Wednesday 05 July 2023

Sheet metal is used to make objects of various thicknesses, from very thin sheet metal to sheet metal with a thickness greater than 6mm. Sheet metal fabrication is a subtractive process that forms metal sheets to the desired shape by using a variety of manufacturing methods. Sheet...

Wednesday 05 July 2023

Quantité : 1200sets/y - Prix : USD10000-200000

CNC Die Sinking EDM Machine For Sale As a professional CNC Die Sinker EDM Machine manufacturer, we aim at providing you erosion machines with high quality. EDM sinker for sale is waiting for your contact with a warm welcome. We are available if you have any questions about spark...

Tuesday 27 June 2023

The complex surface profile of an asphere can significantly reduce or even eliminate spherical aberrations comparing to spherical lenses. Hence, asphericals have been increasingly more widely explored and adopted during the optical design stage. Aspheres can replace a complex multi-element...

Monday 26 June 2023

Provide complete solutions from product design/mold manufacturing/injection mass production. Provide professional medical consumables and medical device molding development and injection molding production services for companies engaged in biotechnology technology development and...

Saturday 03 June 2023

Prix : 0-100

Aluminum Automotive Components Overview Aluminum is an essential item used in producing automotive aluminum parts and assemblies. EMP Die Casting is a leading provider of custom aluminum die cast components for the automotive parts market. We specialize in producing electric vehicle...

Thursday 01 June 2023

The cubic boron nitride has a molecular formula of BN. Its atomic structure is similar to the structure of carbon atoms in diamond. Therefore, it has high-density characteristics, hardness is slightly lower than that of diamond, and its hardness is second only to diamond but much...

Wednesday 31 May 2023

WH Graphite custom graphite coin molds for sale have good thermal conductivity (thermal conductivity determines the solidification speed of metal or alloy) and good self-lubrication performance, which not only improves the casting speed but also can be directly processed in the next...

Wednesday 31 May 2023

Quantité : 1-100,000 - Prix : $1-$10

This is the Customized Custom Stainless Steel Cnc Machining Parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 30mm*34mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Specifications of Customized Custom Stainless...

Thursday 25 May 2023

Prix : 100USD

We provide custom made plastic parts-Sliders, inserts, lifters, blocks, ejector pins, and other mold components for our worldwide clients in 3 days via DHL or TNT. We are able to manufacture custom made plastic parts(Mold slider, lifters, Mold inserts, Core and cavity, blocks, ejector...)

Thursday 25 May 2023

Prix : 100USD

For more than 15 years, Packson Mold has become an excellent manufacturer that is enabled to make parts with high tonnage and large size thanks to our one-stop facility. We are keen to meet your injection molding needs with single and convenient sources. Thanks to our advanced equipment...

Friday 19 May 2023

Large part machining service involving the part size up to 1.0 x 0.8M machinig capacity for tooling making and prototype manufacturing of mechanicl part. Notwithstanding the high degree of skill and knowledge required for all fabrication and machining processes, large part CNC machining...

Friday 19 May 2023

Over 20 years in China prototype precision plastic injection mold design services covering wide range of plastic injection molding technology for electronic, cosmetic, food & medical, household and industrial products with engineering assistance and an intensive list of secondary...

Friday 19 May 2023

Electrical discharge machining, sometimes referred to as spark machining, spark eroding, die sinking, wire burning, or wire erosion, is a metal production technique that uses electrical discharges to carve out the required shape. The CNC EDM service is provided for the making of precision...

Friday 19 May 2023

5 axis cnc machining service provided for the manufacturing of complicated geometrical parts for both metal and plastic. 5-axis One of the most cutting-edge methods accessible now is CNC machining. It uses subtractive machining to give part production a limitless range of options...

Wednesday 17 May 2023

Quantité : 1-10000 - Prix : 0.2-200

This is one of the cheapest CNC machining service available in China, with 17 years of knowledge and experience, our team is able to produce parts that require innovative tooling and fixturing in a timely manner. We approach each job with the intention of minizing the number of operations ...

Wednesday 17 May 2023

Plastic Auxiliary Machinery By Soxi: Always The Right Choice Are you in the market for a new injection molding machine but just not sure how or where to start? It is more complicated than ever before with what seems to be an endless variety of types and brands of plastic auxiliary...

Wednesday 17 May 2023

Sheet metal stamping (also known as sheet metal pressing and forming) is the process of placing flat sheet metal in either blank or coil form into a stamping press where a tool and die surface forms the metal into a net shape. We are one of the leading sheet metal stamping suppliers...

Wednesday 10 May 2023

Quantité : 150000 ton - Prix : USD 2500/T to USD 35

Standard aluminium extrusion profiles are also called general profiles or standard profiles. Otalum produces a wide range of standard profile aluminium extrusions with different dimensions in the following groups: Angle, Bar, Tubes, U-channel. All profiles are produced according...

Friday 05 May 2023

The characteristics of plastic cnc machining china material are defined by the melting point temperature (150 ° to 450 °) and the use environment (ordinary plastics and engineering plastics). When CNC is processing plastic products of plastic CNC service, the material deformation...

Saturday 29 April 2023

Quantité : 0 PCS-1000 - Prix : 1 USD/set ~ 300 USD/

GreensTone mechanical design engineers will work with your team to design and test the best solutions for your products. Gain full access to our specialized molding capabilities including layout, thermal analysis, prototype and verification testing, CNC machining, sheet metal fabrication...

Saturday 29 April 2023

Prix : 200,000 USD~1,500,00

Machines & Materials For Your Metal 3D Printing Demands Eplus3D metal printers are a lab from entry-level models to multi-layer machines for additive production at industrial grades. We also provide advanced processes industrial metal 3D printing with the most various metal materials...

Friday 28 April 2023

One computer mouse usually includes these plastic parts: a bottom shell, an upper cover, a middle cover, a wheel, a base of wheel, a frame which connects with electronic elements etc. These plastic parts are required not only to be textured well, but also to be wear-resistant. In addition...

Friday 28 April 2023

resin bond grinding wheels Resin bonded grinding wheels are generally divided into resin bond diamond grinding wheel and resin bond CBN grinding wheels according to abrasives. Henan E-Grind Abrasives Co., Ltd's resin diamond grinding wheel have long service life, excellent self-sharpening...

Friday 28 April 2023

Prix : USD0.5-2

Lotion Pump Wholesale Profile -Neck range from: 18-53 -Pump types: serum pump, lotion pump, cream pump and foam pump Custom -Several dosage options from 0.1-4ml -Custom component color, Aluminum shell, metallization, matte finish… -Support private mold tooling for custom shape Sustainability...

Tuesday 18 April 2023

Plastic Injection Molds for Sale Packson is the OEM injection mold maker in china. We can supply custom injection molding parts. Our high quality and precision injection molding processes assist us to make molded parts from big, small to medium-sized components with good quality....

Tuesday 18 April 2023

One-stop Custom Molding Services For more than 15 years, Packson Mold has become an excellent manufacturer that is enabled to make parts with high tonnage and large size thanks to our one-stop facility. We are keen to meet your injection molding needs with single and convenient sources...

Wednesday 12 April 2023

Quantité : 50sets/mon - Prix : 80000~180000

TY203 series servo hydraulic press and CNC hydraulic press are independently developed and designed by Ningbo Tianyu Machinery Equipment Co., Ltd. with independent intellectual property rights. The servo hydraulic press machine adopts the imported touch screen for data input and data display...

Wednesday 12 April 2023

Quantité : 50sets/mon - Prix : 80000~180000

This is a high-end CNC drilling machine for panel furniture, which has the advantages of high processing efficiency and a high degree of automation. The electric servo mechanical press can realize six-side position processing and front and back groove processing at a time. TY10 series...

Wednesday 12 April 2023

Quantité : 50sets/mon - Prix : 80000~180000

TY502 is the equipment independently developed by Tianyu Machinery Equipment Co., Ltd. It can detect whether the interference between components is fully in line with the design to prevent the products with unqualified fit clearance from entering into the next process. CNC hydraulic...

Friday 07 April 2023

Penta Prisms are used to define right angles in optical systems. Penta Prisms, which provide right handed images, feature a ray deviation of 90°. Penta Prisms are five-sided prisms and unaffected by slight movements. Edmund Optics offers a variety of Penta Prisms for optimal performance...

Saturday 01 April 2023

What is the family mold? A mold that can only produce one product at a time is called a single-cavity injection mold. If a mould is used to produce two or more plastic parts at a time, multi-cavity injection, if the parts are different, such a mold is called family mold. The plastic...

Saturday 01 April 2023

Prix : USD0.1-15

Our precision plastic injection moulding process produces custom - rapid prototypes and end-use production parts in 15 days or less. We use aluminium moulds that offer cost-efficient tooling and accelerated manufacturing cycles, and stock more than 100 different thermoplastic resins...

Saturday 18 March 2023

HPWINNER is dedicated to being the worldwide leader in the LED high-power outdoor industry. Our products now include LED street lights, LED high bay lights, LED flood lights, LED canopy lights, LED tunnel lights, LED horticulture lights, and LED modules. We have more than 300 light...

Friday 10 March 2023

Our featured & hot own designed portable LED strip light, LED cabinet lights, LED downlights, china led light fixtures etc with private toolings for more choices to light up your sweet home. Types Of LED Lights Portable LED Light Bar Linkable DIY LED Light Bar LED Oyster Ceiling...

Saturday 04 March 2023

Industrial Plastic Injection Mold The industrial moulding part is replacing metal products in many fields of industrial applications to meet the requirement of lightweight industrial equipment and cost-reduction. Green Vitality has accumulated many experiences over the years in providing...

Saturday 04 March 2023

GV Mold has rich experience in home appliance parts (such as television, refrigerators, fans, washing machines, air conditioners, and various smart home appliances). We can provide turnkey solutions for high-precision houseware moulds according to customers' ideas, from raw material...

Friday 03 March 2023

Prix : 3000-20000USD

The grocery store inventory robot uses simple and effective modular design, contactless delivery, so that the service is more peace of mind. Our grocery robot relies on self-developed positioning and navigation technology to ensure positioning accuracy and flexibility. A406 Grocery...

Thursday 02 March 2023

Railroad Clip Steel MIM stand for Metal Injection Molding China, it's a forming method of a metal parts and can provide a nearly unlimited shape, geometric-feature capability, high-production rates through the use of multi-cavity tooling. Compared with conventional technology like...

Thursday 23 February 2023

Quantité : 60,000pcs/ - Prix : USD10-USD50

TOPMB is focusing on home office lighting for many years and is the first company to apply the techniques of Asymmetric Optics to lamps,Hope to bring the best light to your Home. Various home office lamp, design catch the trend of fanshion, funtions are more Intelligence Each year...

Tuesday 21 February 2023

ETCN offers a quality CNC me metal folding/bending press after laser cutting which is used for the base of the compressor motor. Different types of sheet metal bending are available to our clients and meet their satisfaction, like bending stainless steel plate, bending galvanized sheet metal...

Tuesday 21 February 2023

As a professional auto cnc machining ltd, we can supply a high-quality level of CNC automation solution and parts for the production of all-in-one clamping devices, gripper, conveyor line, turntable, and other types of automation fixture/tooling/welding. Machining Services Plastic...

Thursday 16 February 2023

ISO Class 8 Clean Room  Quality Control  Low & High Volume Manufacturing  Competitive Price  Reliability and Stability Prototype moulds are rapid processing for the molds. It's totally different from production molds as they can't be used in the long term. As a professional...

Thursday 16 February 2023

ISO Class 8 Clean Room  Quality Control  Low & High Volume Manufacturing  Competitive Price  Reliability and Stability Precision injection molding is a process that requires high technique and the use of precision molds and precision machines. The process of precision mould...

Wednesday 15 February 2023

Quantité : 200,000 - Prix : 5-2500

Membrane panel is a type of HMI, in which the structure is generally PET, PC, PVC as the base material, DT, Nitto or 3M as the adhesive material to assemble them together. Membrane switch and panel is a kind of HMI with more prominent performance and lower prices. The membrane touch...

Tuesday 14 February 2023

Quantité : 5000-10000 - Prix : 1000-5000,5000-10000

Open room plan, variable color matches: this living room provides a holistically planned living space. Black glass adds more mystery to the world. Specifications of Shallow TV Cabinet Model No VTM-004 Carcass 18mm white Particle board, E1 standard Door materials 20mm black painted...

Saturday 11 February 2023

Quantité : 10 equipme - Prix : 14726-294529 USD

Hengchuang, one of the top trough rollers suppliers in China, produces different types of conveyor idlers including various grooved rollers, buffer rollers, parallel rollers, etc. The idler roller conveyor specifications range from 89 to 219, according to different belt conveyor idler...

Thursday 09 February 2023

Quantité : 50sets - Prix : 80000-180000

TY203 series servo China hydraulic press and CNC hydraulic press are independently developed and designed by Ningbo Tianyu Machinery Equipment Co., Ltd. with independent intellectual property rights. The servo China hydraulic machine adopts the imported touch screen for data input...

Thursday 09 February 2023

Quantité : 50sets - Prix : 80000-180000

This is a high-end CNC drilling machine for panel furniture, which has the advantages of high processing efficiency and a high degree of automation. The electric servo mechanical press can realize six-side position processing and front and back groove processing at a time. TY10 series...

Thursday 09 February 2023

Quantité : 50sets - Prix : 80000-180000

TY502 is the equipment independently developed by Tianyu Machinery Equipment Co., Ltd. It can detect whether the interference between components is fully in line with the design to prevent the products with unqualified fit clearance from entering into the next process. CNC hydraulic...

Tuesday 31 January 2023

Adapter is one of the most important part of G.E.T system, especially the cast lip system. Either made by casting or forging, an adaptor installed between the lip and the tooth. It's nose and pocket support the main structure. WALKSON mainly focus on providing big size cast adaptor...

Thursday 19 January 2023

Prix : USD10000-200000

As a professional CNC Die Sinker EDM Machine manufacturer, we aim at providing you erosion machines with high quality. EDM sinker for sale is waiting for your contact with a warm welcome. We are available if you have any questions about spark erosion machine for sale. What is CNC...

Wednesday 11 January 2023

It is a mechanical assembly used to control the steering of lawn mower, consisting of drive arm, steering arm, steering knuckle , etc. Most of these parts are made of low carbon steel by stamping and connected by welding or screws. And at last, obtaine the desired color by powder coating...

Friday 06 January 2023

With the vigorous development of the automotive industry, plastic auto part mold is also developing rapidly. 90% of auto parts are produced by injection molds, which is a huge market opportunity for auto plastic parts manufacturers . Common large-size auto parts such as car bumpers...

Friday 06 January 2023

Aluminum High Pressure Die Casting Mold When working at high or low temperatures, they also maintain good mechanical properties and have good corrosion resistance. properties and antioxidant properties. Die castings are widely used in construction, hardware, equipment, machine tools...

Wednesday 04 January 2023

MIM China is a repeatable process for complex components made from high-temperature alloys. MIM parts are near fully dense, which provides excellent mechanical, magnetic, corrosion, and hermetic sealing properties, and allows secondary operations like plating, heat treating, and machining...

Wednesday 04 January 2023

MIM stand for Metal Injection Molding, it's a forming method of a metal parts and can provide a nearly unlimited shape, geometric-feature capability, high-production rates through the use of multi-cavity tooling. Compared with conventional technology like press sintered and CNC...

Wednesday 04 January 2023

Small Hardware MIM stand for Metal Injection Molding, it's a forming method of a metal parts and can provide a nearly unlimited shape, geometric-feature capability, high-production rates through the use of multi-cavity tooling. Compared with conventional technology like press sintered and CNC...

Wednesday 04 January 2023

Rotating Cam MIM metal injection molding china shaft can reduce the volume of the finished product and the production cost of the rotating camera. Rotating Cam Specifictions Product key words: Rotating Cam,camshaft rotation, Materials: 4605,Fe8Ni Requirements: polishing, sand pulling...

Saturday 31 December 2022

Gmmoldtech CNC component can greatly reduces the number of tooling, and complex tooling is not needed to process complex parts. If we want to change the shape and size of the parts, we only need to modify the processing program of the parts, which is suitable for the plastic molding...

Saturday 10 December 2022

Quantité : 1-100,000 - Prix : $1-$10

CNC Machining Lists DF has been providing CNC machining parts, featuring 4 Axis CNC machining, 5 Axis CNC machining, CNC milling parts, and lathing parts. They are available in communication, furniture, electronic non-standard isolation, microwave and non-ferrous construction equipment...

Friday 09 December 2022

ISO Class 8 Clean Room  Quality Control  Low & High Volume Manufacturing  Competitive Price  Reliability and Stability With more than 20 years of experience in clean room injection molding, as the medical device clean room injection manufacturer in China, we specialize in...

Friday 09 December 2022

ISO Class 8 Clean Room  Quality Control  Low & High Volume Manufacturing  Competitive Price  Reliability and Stability Packson is not totally the same as other medical plastic injection molding companies. Because we are an ISO-certified medical injection molding provider....

Friday 09 December 2022

ISO Class 8 Clean Room  Quality Control  Low & High Volume Manufacturing  Competitive Price  Reliability and Stability With more than 20 years experience of injection molding industry and equipped with ISO Class 8 Clean Room, as the injection moulding suppliers , we offer...

Friday 09 December 2022

Plastic Injection Molds for Sale ISO Class 8 Clean Room  Quality Control  Low & High Volume Manufacturing  Competitive Price  Reliability and Stability Packson is the OEM injection mold maker in china . We can supply custom injection molding parts. Our high quality and precision...

Friday 09 December 2022

ISO Class 8 Clean Room  Quality Control  Low & High Volume Manufacturing  Competitive Price  Reliability and Stability Packson is a contract manufacturer specializing in CNC Milling, CNC Turning, CNC Drilling services in China. We are able to manufacture plastic machining...

Friday 09 December 2022

2K Plastic Injection Moulding  ISO Class 8 Clean Room  Quality Control  Low & High Volume Manufacturing  Competitive Price  Reliability and Stability 2 component injection molding is one type of injection mold. 2k molding is also named as two colour injection moulding ...

Friday 09 December 2022

ISO Class 8 Clean Room  Quality Control  Low & High Volume Manufacturing  Competitive Price  Reliability and Stability For more than 15 years, Packson Mold has become an excellent manufacturer that is enabled to make parts with high tonnage and large size thanks to our one-stop facility...