TESTER - 1241 Annonces

Mercredi 06 septembre 2017

Schopper Abrasion Tester Testing Standards: DIN 53863, part 2 , GME Standard 60345, GMW Standard 3283, VW/Audi Zentral-Norm PV 3908 Applications: The Schopper Abrasion Tester is designed for evaluating the abrasion resistance of automotive trim materials under tension using a rotary...

Mercredi 06 septembre 2017

Footwear Flection Tester Standards: Satra TM92 & 77 Applications： The Footwear Flection Tester is designed to assess the flexing endurance of completed footwear in wet and dry conditions. Product information： The Footwear Flection Tester is supplied in both single or twin station...

Mercredi 06 septembre 2017

Nail Bed Flammable Tester Standards: 16 CFR1510, ASTMF963?4.6.2 Applications: The tester is designed for determining the flammability of cloth toys and plush toys, used in the detection of flammability of flammable hair, and recording the burning time, to make a assessment whether...

Mercredi 06 septembre 2017

Drill Flocking Performance Tester Testing Standards: GB/T 12705.1/14272, BS EN 12132-1 Applications: Drill Flocking Performance Tester is designed for determining the down-proof properties of fabric for the liner material, feather or fibers of winter clothes, down jacket, quilts...

Mercredi 06 septembre 2017

Spray Rating Tester Testing Standards: ISO 4920, BS EN 24920, BS 3702, GB/T 4745, AATCC 22, M&S P23, NEXT 23 Applications: Spray Rating Tester is used to determine the surface wetting resistance of fabrics. Product Information: The Spray Tester comprises a metal framework allowing...

Mercredi 06 septembre 2017

MMT Moisture Management Tester Testing Standards: AATCC 195, SN 1689.1, GB/T 21655.2 Applications: The Moisture Management Tester (MMT) is an equipment to measure the dynamic liquid transport properties of textiles such as knitted and woven fabrics. Product Information: Fabric...

Mercredi 06 septembre 2017

Thermal resistance wet resistance tester Testing Standards: GB/T 11048, ISO 11092, ASTM F1868, ASTM D1518, JIS L1096 Application The Thermal resistance wet resistance tester simulates the heat and mass transfer processes which occur next to human skin. Measurement of thermal resistance...

Mercredi 06 septembre 2017

Digital Autoburst Strength Tester Standards: ASTM D3786, ERT 80-4-20, GB/T 7742.1, BS EN ISO 13938-1, BS 3424-6-B, ISO 3303-B, ISO 2758, ISO 3303.2, ISO 3689, JIS L1018/L1093, IWS TM170 Applications: Digital Autoburst Strength Tester is used to determine the bursting strength and...

Mercredi 06 septembre 2017

Digital Elmendorf Tearing Tester Standards: ASTM D1424/D689, NEXT 17, M&S P29, BE EN ISO 13937/4674, BS 4468, DIN EN 21974, GB/T 3917.1, ISO 1974 Applications: Digital Elmendorf Tearing Tester is used for determining the tear strength of fabrics, non-woven, paper, cardboard...

Mercredi 06 septembre 2017

Testing Standards: ASTM D5171 Applications: Button Impact Tester is used to determine the impact resistance of plastic sew-through flange buttons. Product Information: With the equipment the impact resistance of plastic sew-through flange buttons can be determined that a falling mass of 0...

Mercredi 06 septembre 2017

Circular Locus Pilling Tester Testing Standards: GB/T 4802.1, JIG 040-1990 Product Information: The Circular Locus Pilling Tester is used for determining the pilling and fuzzing of all kinds of fabrics to evaluable the product quality and process, such as wool, chemical fiber, mixed...

Mercredi 06 septembre 2017

Scorch/Sublimation Tester Testing Standards: ISO 105 X11/P01, BS 1006, AATCC 92/114/117/133, GB/T 5718/6152, DIN 54022/54060, JIS L0879/L0850 Applications: Scorch/Sublimation Tester is used in the laboratory to evaluate colour fastness to dry heat, hot pressing and sublimation,...

Mercredi 06 septembre 2017

Perspiration Tester Testing Standards: ISO 105 E01/E02/E04, BS 1006, AATCC 15/106/107, DIN 54005, M&S C6/C7, NEXT TM4, DIN EN ISO 105 E01/E02/E04, GB/T 3992/5713/5714 Applications: The Perspiration Tester is designed for color fastness test to perspiration, sea water, saliva...

Mardi 05 septembre 2017

Wyzenbeek Abrasion Tester Testing Standards: ASTM D4157 Applications: Wyzenbeek Abrasion Tester is used to determine the abrasion resistance of fabrics when rubbed against a standard abradant or a wire mesh screen with a backward and forward motion over a curved surface. Particularly...

Mardi 05 septembre 2017

Melt flow indexer(MFI) are used for military uniforms, canvas, canvas, labor insurance products. The fabric fusing tester is designed for use in the determination of the heat-resistant properties of chemical fiber and blended fabrics to determine the effect of fabric resistance...

Mardi 05 septembre 2017

Introduction To automatically determine the minimum quantity of oxygen required for combustion. The apparatus determines the flammability characteristics of the materials used in the production of electric cables. The oxygen percentage is detected by a paramagnetic transducer (O2 accuracy <0...)

Mardi 05 septembre 2017

Introduction The electric tracking index test is performed on a surface of a solid insulating material by applying a voltage to a platinum electrode of a predetermined size (2 mm x 5 mm) and dropping a predetermined volume of conductive liquid (0.1% NH 4 Cl) at a predetermined height...

Mardi 05 septembre 2017

The device use needle flame to simulate small flame effect resulted from equipment incorrect operation so as to evaluate fire hazard. Expose the specimen to fire in a certain time. The temperature of the copper block is measured by K-type mineral insulated metal sheathed thermocouples...

Mardi 05 septembre 2017

The glow wire tester Brief Introduction About the glow wire tester operation instructions according to the GB5169 and GB4706 the design and manufacturing requirements with the standards so called glow wire test method, which apply to the fire danger test on electrical and electronic products...

Mardi 05 septembre 2017

Introduction： Multi Finger Scratch/Mar Tester uses tungsten carbide as a scratch to accurately detect surface damage caused by unconventional physical forms (such as scraping, grasping, planning etc). It can be used to detect the wear resistance of plastic parts in automobile interior...

Mardi 05 septembre 2017

A six station Colorfastness/Rubbing Tester used to determine crocking, color transfer, and abrasion resistance of leather, fabric, vinyl, stitched seams, plastics and other materials. Each station is equipped with a removable rub head and set of table clamps to facilitate up to six...

Mardi 05 septembre 2017

Introduction Crosshatch scratch tester/Scratch tester makes contacting relative motion between the scratching head and material surface for the evaluation of the sensory level of scratches, changes in color difference between scratched area and unscratched area, or the detaching situation...

Mardi 05 septembre 2017

Scratch/Shear Tester used for a variety of automotive interior materials, such as plastics, rubber, leather, fabric, coating materials, coating materials and other non-composite materials such as scratch resistance detection. Core advantages: Scratch/Shear Tester from Qinsunlab can...

Mardi 05 septembre 2017

Introduction scratches, plastic scraper three kinds of automotive industry common test methods into one. It is suitable for a variety of automotive interior materials, such as plastic, rubber, leather, fabric, coating materials, non-coated materials and other composite materials...

Mardi 05 septembre 2017

Reciprocating abrasion tester Brief Introduction Reciprocating abrasion tester used by way of rotary grinding, using different kinds of friction wheel rotational friction on the sample to detect wear performance for leather and plastic materials, make scientific evaluation of the...

Mardi 05 septembre 2017

Brief Introduction： The fogging tester used to test the properties under certain environmental conditions for leather and fabric fogging phenomenon, for the automotive, aircraft and other interior materials fogging performance at high temperatures volatile components of its evaluation...

Vendredi 01 septembre 2017

Introduction Launder-ometer /washing color fastnesss tester can be used for washing, dry cleaning color fastness test. Double cylinder separation, respectively, with an independent operation control panel, can be carried out two different temperature experiments at the same time....

Vendredi 01 septembre 2017

Testing Standards: ASTM D1230, FTMS 191-5908, CFR 16 Part 1610, CALIF TB 117, NFPA 702, GB/T 14644 Applications: 45 degree flammability tester is designed to determine the burning characteristics of textiles. Stainless steel test cabinet with glass observation panel provided with...

Vendredi 01 septembre 2017

Horizontal Flammability Tester Standards: ISO 3795, FMVSS 302, DIN 75200, SAE J369, ASTM D5132, JIS D1201, AU 169 Applications: The Horizontal Flammability Tester is designed for determining the comparative burn rates and burn resistance of textiles, particularly those for automotive...

Vendredi 01 septembre 2017

Introduction Weather-Ometer and Fade-Ometer tester adopts water-cooled xenon lamp. This instrument using argon arc lamp simulation control ideal natural climate and solar and other experimental conditions to to test the color and performance of textile dyes. It can also test the...