Low Temperature Chrysler Fold Tester
Cold Fold Tester ---Chrysler
Standards: LP-463-KB-28-01 Method A
Applications:
This Cold Fold Tester is applied to the cold fold test based on Chrysler method and designed to measure the resistance to cold cracking of the soft trim materials.
Product Information:
The Cold Fold Tester is easy to operate. After setting the automatic counter, the instrument starts to work with the Chrysler standard sample. The Tester is designed for the control box to be outside the cold chamber while the test stand is placed inside the cold chamber, using the supplied cable to connect the two sections. The motor is designed to operate at the expected cold environment with no loss of performance.
Features:
1.Mechanical components are constructed of non-corrosive Aluminum and Stainless Steel.
2.Durable Powder Coat and Anodized finishes.
3.Precision ball and needle bearings.
4.Cold temperature capable.
5.Programmable count-up controller with automatic stop.
6.Adjustable test speed controls.
Technical Parameters:
1.Environmental: -29±1.1℃;
2.Speed: 90 cycles/minute;
3.Stations: 2;
4.Plates open: 32mm;
5.Plates closed: 3mm;
6.Holder width:≥51mm;
7.Cycle counter: 4 digits;
8.External dimension: 12×10×5.5 inches (W×L×H);
9.Weight: 21kg (46lb).
Personne à contacter : Sun Qin, +86 21 6780 0179
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de Low Temperature Chrysler Fold Tester Rechercher dans la catégorie : Biens d'équipement Rechercher dans la catégorie : tester, chrysler, fold, temperature |
Mardi 29 octobre 2013
Quantité : 1 - Prix : 450 000
Vends d'occasion: 1 ligne complète pour fabriquer des granulés de bois (pellet) et buches de bois densifié. Production : 3 Tonnes Heure. - Marque Klöckner - Matériel à travailler 3 ans est en parfait état. - Matériel encore installé. 1- Arrivée de la matière première soit en...
Dimanche 12 juillet 2015
Quantité : 1 - Prix : 2 000,00 €
Factory Equipment: 1. 4 hole High-speed air turbine handpiece's connector 2 set 2. Low-speed handpiece tubing with connector 1 set 3. 3-way syringe (hot & cold) 2 piece 4. up-mounted instrument tray 1 set 5. Turnable ceramic cuspidor 1 set 6. Double joint headrest 1 set 7...
France Skylight International Limited
- 528500 - Foshan
- +15 0 19 61 17 04
Lundi 31 mars 2014
Quantité : ≥200KG - Prix : 5.88 USD/KG~6.98 USD
RTV- 2 caoutchouc de silicone pour fabrication de moules Modèle de produit: INNO SILICE ® IS- CR Dureté: 15 Shore A , 20 Shore A , 25 Shore A , 30 Shore A , 35 Shore A , 40 Shore A Applications: Il est utilisé principalement dans l'industrie de fabrication de moules à la coulée...
Shen Zhen Inno Silica Co.,Ltd
- innosilica
- 518057 - Shenzhen
- +86 15768639143