GRADE70|ASTM - 2905 Annonces

Thursday 11 April 2024

REINFORCED ALUMINUM FOIL TAPE Polyethylene fiber mesh laminated with foil is very popular in HVAC industry. It can used for wrapping the air ducts and laminating the glass wool or rock wool thermal insulation, duct board joints applications. It can be either easy tear or hard tear...

Thursday 11 April 2024

PP STRAPPING BAND The main material of PP strapping band is polypropylene wire-drawing resin, the color is translucent, the product tension is strong, the adhesive degree of thepolypropylene strapping band is good, the bending degree is small, to ensure the product packaging firm...

Thursday 11 April 2024

PE STRETCH FILM Egret PE polyethylene stretch film, which is a transparent thermoplastic. PE commonly used there are three categories, namely : LDPE HDPE LLDPE three kinds ofpolyethylene monomer is the same, but, in the synthesis of these polyethylene, the process conditions are not the same...

Thursday 11 April 2024

NBR FOAM TAPE NBR foam tape stands for nitrile-butadiene rubber foam tape, also called as PVC foam tape. Thermoplastic elastomer is also called artificial rubber or synthetic rubber. Its products not only have the high elasticity, aging resistance, oil resistance of traditional cross-linked...

Thursday 11 April 2024

Duct Tape for Sale Egret so-called duct pipe wrap tape is used a lot for sealing water leakages and repair, it is also called as duck tape or cloth tape. Important to realize, as it is can be used for repair or seal the duct works, so it is named duct tape. The base material is scrim...

Thursday 11 April 2024

DOUBLE SIDED TISSUE TAPE Egret so-called double sided tissue tape is used a lot for bonding different materials, and for refrigerator metal parts fixing. Normally is coated with natural rubber glue or solvent based acrylic adhesive on both sides. Plus, this tissue tape double sided...

Thursday 11 April 2024

DOUBLE SIDED SCRIM TAPE Double sided scrim tape is made of high strength glass fiber yarn for strengthening the back material, coated with strong adhesion pressure sensitive adhesive on both sides; The double-sided scrim tape has high tension strength, strong viscosity, high wear...

Thursday 11 April 2024

Steel - cored aluminium stranded wire, it could also be described as ACSR Conductor or ACSR Aluminium Conductor or acsr goat conductor steel reinforced etc.. Steel - cored aluminium stranded wire has the same structure as the aluminum conductor alloy reinforced (ACAR) , except that...

Thursday 11 April 2024

As a kind of energy saving conductor, aluminium alloy core stranded wire is mainly used for power transmission and distribution in UHV overhead transmission lines. It can improve the transmission power and save energy consumption. Under the same outer diameter conditions, it is smaller...

Thursday 11 April 2024

Aluminum clad steel wire, also known as acs conductor, can be used for ground wire and conductor of overhead power line, and also can be used for electrified railway cable. Acs conductor is a cable product with aluminum - clad steel wire twisted.According to the conductivity of the...

Thursday 11 April 2024

Aluminum clad steel core aluminum stranded wire is mainly used for overhead lines, compared with ordinary steel core aluminum stranded wire, with light weight, high load, low power loss and other advantages, and anti-corrosion performance, and maintenance is convenient, long service life...

Thursday 11 April 2024

Steel core aluminum alloy stranded wire is mainly used in long-span overhead transmission lines, with good tensile strength. The aacsr conductor is widely used in high-altitude heavy ice lines and UHV smart power grids. In addition, the anticorrosive steel core aluminum alloy stranded...

Thursday 11 April 2024

All Aluminum Conductor (aac tarantula conductor) is a common bare wire, mainly used for power transmission in open places and long-distance overhead lines. Such as grasslands, forests and other places etc. all can use aluminium stranded wire. The aac ant conductor can also be used...

Thursday 11 April 2024

Aluminum alloy stranded wire, aslo know as aaac sorbus conductor, is mainly used for long-distance overhead lines, but also can be used as overhead line bearing line or other cable core. Mainly ASTM B399 standard, BS EN50183 standard, BS3242 standard, IEC61089 standard, French standard...

Tuesday 09 April 2024

ERW Carbon Steel Pipe (electric resistance welding) is produced by welding strip of flat sheet metals. That are formed, bent and prepared for welding. After that, making galvanization treatment to help prevent corrosion, rust, thereby extending the pipe life. Welded Steel Pipe is...

Tuesday 09 April 2024

Carbon steel include seamless and welded constructure. Seamless steel are mainly used for liquid transport, and are applicable to transport liquid, gas, oil, and mechanical propose. Welded are lower production cost and raw materials availability. The common carbon steel are ASTM or...

Tuesday 09 April 2024

DIN FLANGENormally, in industrial applications, flanges are in various shapes and sizes and can be made of a variety of materials. However, the type of material used in the flange has nothing to do with the flange type or size. The flanges produced under the standard requirements...

Tuesday 09 April 2024

Steel Searcher Channel/U Beam is a long strip of steel with a groove-shaped cross-section. It is a carbon structural steel products for construction and machinery. It is a section steel with a complex cross-section. steel beam channel is mainly used in building structure, curtain...

Monday 08 April 2024

Tin Zinc Lead Bronze Rod The tin-zinc-lead bronze produced by our company can be used in pipelines, valve fittings, seawater-resistant parts, manufacturing sleeves, bearing pads, piston clutches. Tin-zinc-lead bronze is also known as automobile bronze, suitable for gravity casting...

Monday 08 April 2024

Precision Extrusion Rod The precision extrusion rods produced by our company are round, square, hexagonal and special-shaped, and the specifications range from 2mm to 95mm. It has the characteristics of high straightness, high tolerance consistency, and high comprehensive mechanical performance...

Wednesday 03 April 2024

Quantité : 4000 squar - Prix : USD7.00 ~USD35.00 Pe

WAG-TL1305 Non-asbestos Metal Composite Material WAG‐TL1305 is a gray color metal steel composite gasket material laminated with TL1305 facing material and mechanically combined to a perforated steel core. It is intended for exhaust manifold, cylinder head as well as other industrial...

Wednesday 03 April 2024

The microstructure of the duplex stainless steel globe valve consists of a mixture of an austenitic phase and a ferrite phase. Therefore, the duplex steel has both austenitic and ferritic stainless steel properties. The duplex globe valve uses stainless steel which has stronger...

Friday 29 March 2024

Prix : 2300 USD/Ton--3700 U

Face Masks made of bfe 99 melt-blown nonwoven fabric can effectively block the spread of bacteria. The Overview of CK302017 BFE95,BFE98,BFE99 Medical Melt-blown BFE We can provide different standard 20g m2 meltblown nonwoven fabric for sale used for different products, especially...

Thursday 28 March 2024

Quantité : 1-1000 - Prix : 10-10 million

CS-Prep® high pressure liquid chromatography system consists of an infusion section, an injection section, a detection section, a distillate collection section, a control and data processing section. It is the first diaphragm pump explosion-proof ultra high performance liquid chromatography...

Saturday 23 March 2024

OVERVIEW OF TINPLATE Tinplate is a cold-rolled, low-carbon steel product that is coated with a thin layer of tin metal on both sides. This unique combination provides both the strength of steel and the corrosion resistance and weldability of tin. The most common application of tinplate...

Friday 15 March 2024

Super Clear Bopp Tape Feature: Super permeable film as backing coated with different types of glues including acrylic water-based adhesive, hotmelt adhesive and solvent adhesive. Application: Widely used for carton sealing, auto-packing machine, bundling. Specification of Super Clear...

Thursday 14 March 2024

Clear PVC , commonly referred to as transparent plastic , are offered in a variety of standards, including ASTM, DIN, and ANSI. The transparent plastic pipe is used for the chemical pipeline protection casing due to its excellent chemical resistance and visibility. The plastic transparent...

Thursday 14 March 2024

Prix : 50~1000 USD

EHS1A/5D is a high-precision digital shore hardness meter. This EHS digital shore durometer gauge adopts high-precision displacement sensor and spring design with high test accuracy. Shore durometer tester or durometer meter has three measurement modes: maximum mode, maximum average mode...

Thursday 14 March 2024

Prix : 50~1000 USD

EHP210 is a light and portable tester. With 5 inch touch screen design. It is most suitable for testing of heavy, big or outdoor metal parts. It can measure in any direction and also easy to be used and accurate on curved test surfaces. Especially, the digital leeb hardness tester...

Thursday 14 March 2024

Prix : 50~1000 USD

The NEW Leeb Hardness Tester is a very handy portable, but powerful and versatile hardness tester for different kind of metallic materials including steel and cast steel, cold work tool steel, stainless steel, grey cast iron, nodular cast iron, cast aluminum alloys, brass (copper-zinc alloys)...

Thursday 14 March 2024

Prix : 50~1000 USD

DoHP100 Portable Hardness Tester is a small, light and portable tester. And the leeb portable hardness tester is most suitable for testing of heavy, big or outdoor metal parts. The digital leeb hardness tester conforms to the Standard ASTM A956-02 & DIN 50156. This type of digital...

Wednesday 13 March 2024

Prix : 1-15USD

We can provide a wide range of wear resistant products for mineral processing industry. The role of a white iron mill liner is to give the mill heads protection against wear and tear thus increasing their lifetime and creating optimal grinding efficiency. The key products we can supply include...

Wednesday 13 March 2024

Prix : 1-15USD

WALKSON, as a professional safety valve parts manufacturer, supplies main parts for pressure safety valve, consisting of Valve Body, Disc, Stem and Valve Seat. Those pressure relief valve components can be made either from safety valve casting or forgings. Available material includes...

Thursday 07 March 2024

Quantité : 9999 - Prix : 1,00 €

Présentation du micro-testeur de fuite MLT-01 Présentation de la méthode de désintégration sous vide Le test de décroissance du vide est une méthode quantitative permettant de détecter les fuites dans divers emballages, rigides et flexibles, sans provoquer de dommages. Il identifie...

Thursday 07 March 2024

Quantité : 9999 - Prix : 1,00 €

Testeur de pointage à chaud HTT-02 Application: Le collant à chaud, un aspect critique des couches thermoscellées, détermine leur capacité à supporter les forces de séparation lorsqu'elles sont encore chaudes, ce qui est particulièrement vital dans les processus de remplissage et...

Thursday 07 March 2024

Quantité : 9999 - Prix : 1,00 €

Testeur de durabilité flexible GFT-01 Arrière-plan Les matériaux barrières flexibles doivent supporter des contraintes répétitives, connues sous le nom de durabilité à la flexion ou résistance Gelboflex. Une forte résistance aux fissures de flexion est cruciale pour réduire le risque...

Thursday 07 March 2024

Quantité : 9999 - Prix : 1,00 €

Le testeur de friction et de pelage FPT-01 est un appareil polyvalent adapté à une variété d'applications. Il mesure avec précision les coefficients de frottement statiques et cinétiques sur une large gamme de matériaux, notamment les films plastiques, le caoutchouc, le papier et les tissus...

Thursday 07 March 2024

Quantité : 9999 - Prix : 1,00 €

Le testeur de coefficient de frottement du plan incliné évalue le coefficient de frottement statique sur divers matériaux, à l'aide d'un plan incliné réglable et d'un bloc coulissant. Il évalue le COF statique des films plastiques, des feuilles, du caoutchouc, du papier, du carton...

Tuesday 05 March 2024

Quantité : 1000TONS/M - Prix : $5-100/kg

TITANIUM ALLOY STEEL TUBE Titanium is the ninth most abundant element in the earth's crust and the seventh most abundant metal. Using titanium alloy, the Titanium alloy tube has low density, which is slightly over half that of steel, and high strength combination. That is why titanium...

Tuesday 05 March 2024

Quantité : 1000TONS/M - Prix : $5-100/kg

STEEL FITTING Steel has been used for making pipe and pipe fittings for years for its durability and strength. Moreover, steel also offers high resistance to heat. This property also adds to the popularity of steel for making and pipe fittings. As steel hose fittings tend to rust...

Tuesday 05 March 2024

Quantité : 1000TONS/M - Prix : $5-100/kg

STAINLESS STEEL PIPE/TUBE Stainless steel pipe/tube is one of the most widely used in manufacturing and fabrication. Seamless and welded are the common types of stainless steel tube/pipe, and the difference between those two types is because of the different production procedures...

Tuesday 05 March 2024

Quantité : 1000TONS/M - Prix : $5-100/kg

NICKEL ALLOY STEEL PIPE /TUBE Nickel alloy is one of the most useful materials for manufacturing technically superior nickel alloy pipe for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloy is exceptionally corrosion-resistant...

Tuesday 05 March 2024

Quantité : 1000TONS/M - Prix : $5-100/kg

HIGH TEMPERATURE ALLOY FLANGE High-temperature alloy flanges are mainly used in aerospace and energy fields. HIGH-TEMPERATURE FLANGE PROVIDED BY YUHONG As a professional forged flange supplier in China, YUHONG GROUP provides the best ASTM A182/ASME A182 High-temperature alloy flange...

Tuesday 05 March 2024

Quantité : 1000TONS/M - Prix : $5-100/kg

HASTELLOY FITTING Hastelloy is a corrosion-resistant nickel alloy that contains other chemical elements such as chromium and molybdenum. Thus, the Hastelloy pipe fittings have high-temperature resistance and excellent corrosion resistance. Hastelloy C276 pipe/tube fittings are one...

Tuesday 05 March 2024

Quantité : 1000TONS/M - Prix : $5-100/kg

DUPLEX STEEL PIPE/TUBE As a professional duplex stainless steel flanges manufacturer in China, Yuhong Group provides quality super duplex tubing solutions. The microstructure of duplex stainless steel pipe for sale is approximately 50% ferrite (body-centered cubic structure) and 50%...

Tuesday 05 March 2024

Quantité : 1000TONS/M - Prix : $5-100/kg

COPPER ALLOY STEEL TUBE Copper alloy is an alloy composed of pure copper as the matrix and one or several other elements added. Pure copper is purple-red, also known as copper. The density of pure copper is 8.96, the melting point is 1083℃. The copper alloy tube/pipe made with copper...

Tuesday 05 March 2024

Quantité : 1000TONS/M - Prix : $5-100/kg

C44300 Copper Alloy Pipe ASTM B111 C44300 tube is widely used in the surface condenser, heat exchanger, and evaporators. The C44300 tube offers high strength, excellent corrosion resistance, and good creep resistance at elevated temperatures. SB111 C44300 TUBE SPECIFICATION COUNTRY...

Tuesday 05 March 2024

Prix : USD2500-3500Ton

6082 Aluminium Tube 6082 aluminium tube is a medium strength alloy with excellent corrosion resistance. Aluminium 6082 Tube has the highest strength of the 6000 series alloys. Application of 6082 Aluminium Tube 6082 aluminum hollow bar mainly used bicycle Parts, aircraft ducting,...

Tuesday 05 March 2024

Prix : USD2500-3500Ton

6082 Aluminium Sheet 6082 aluminum sheet is a thim, flat sheet of 6082 al alloy. This alloy is in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is one of the more popular alloys in its series. Application of 6082 Aluminium Sheet AW 6082 aluminum sheet mainly...

Tuesday 05 March 2024

Prix : USD2500-3500Ton

6082 Aluminium Round Bar Aluminum Round bar ( Rod ) may be cold finished or extruded and Aluminum Round Bar (Rod) is available in various alloys offering a range of weldability, corrosion resistance, and machinability. High strength Aluminum Round Rod can be used in aerospace applications...

Tuesday 05 March 2024

Prix : USD2500-3500Ton

6063 Aluminium Tube 6063 aluminum pipe belongs to the low alloying Al-Mg-Si series high plastic alloy. It has many valuable functions. Application of 6063 Aluminium Tube 6063 aluminum round pipe is widely used in the construction of aluminum doors, windows and curtain walls, irrigation ...

Tuesday 05 March 2024

Prix : USD2500-3500Ton

6063 Aluminium Sheet 6063 aluminium sheet is a medium-strength heat-resistant strengthened alloy in the AL-Mg-Si series, it has half the strength of aluminum 6061 alloys. It is typically produced with very smooth surfaces fit for anodizing. Application of AW 6063 Aluminium Sheet 6063...

Tuesday 05 March 2024

Prix : USD2500-3500Ton

6063 Round Bar 6063 grade is commonly referred to as the architectural alloy. It was developed as an extrusion alloy with relatively high tensile properties, excellent finishing characteristics and a high degree of resistance to corrosion. Application of 6063 Aluminium Round Rod 6063...

Tuesday 05 March 2024

Dental Tooth Materials PEEK Removable Denture R&D Series Dental peek material R&D Series has good wear resistance and high mechanical strength. It is mainly used in dentistry in medical field. Specification of PEEK Denture Material R&D Series Material Properties Test...

Saturday 02 March 2024

DL5Y Oil Testing Centrifuge Crude oil ASTM centrifuge DL5Y used in petroleum, geological industry, it is essential for the separation of oil equipment. It meets the requirements of GB/T6533-86 standard, and makes use of centrifugal separation to determine the water content of your...

Thursday 22 February 2024

FSK tape is short name for foil scrim kraft tape. It is fire resistant, moisture barrier, very popular in thermal insulation industries. It is combination of aluminum foil, brown kraft paper, fiberglass scrims. It can used for wrapping the air ducts and laminating the glass wool or...

Thursday 22 February 2024

EVA foam tape stands for ethyl vinyl acetate foam tape. Ethylene - vinyl acetate copolymer, EVA for short. Generally, the content of vinyl acetate (VA) is 5%-40%. Compared with polyethylene (PE), EVA reduces the high crystallinity and improves the toughness, impact resistance, filler...

Thursday 22 February 2024

EPDM foam tape stands for ethylene propylene diene rubber tape. Closed cell EPDM foam products are formed by foaming the synthetic rubber into soft and elastic foaming product. EPDM (ethylene propylene diene rubber) is a saturated polymer with excellent aging resistance, weather...

Thursday 22 February 2024

Egret so-called duct pipe wrap tape is used a lot for sealing water leakages and repair, it is also called as duck tape or cloth tape. Important to realize, as it is can be used for repair or seal the duct works, so it is named duct tape. The base material is scrim fabrics or cloth...

Thursday 22 February 2024

CF8M Valve Meaning CF8M is a widely used material designation in the valve industry, referring to a cast version of stainless steel grade 316. CF8M stainless steel is a popular choice for valve manufacturing due to its excellent corrosion resistance, mechanical properties, and versatility...

Wednesday 21 February 2024

Prix : ＞0.8USD

Product description We are manufactures and suppliers of buttweld 45 degree elbows that are popularly referred to as '45 ELBOW or 45 BENDS'. Joined to a pipe at 45 degree angle, these have a curve that produces a excellent 45 diploma directional waft of the inner fluid. As one of...

Wednesday 21 February 2024

Prix : ＞0.8USD

Product description Forged Rings Features Forming type : forging Rating: ANSI150LBS~2500LBS, DIN PN6~PN160 JIS 5K~30K, HG PN0.25~PN25 PN2.0~PN42.0 Size : 15mm—5000mm Forged Rings Standard ASME/ANSI: ASME B16.5, ASME B16.48, ASME B16.47 , API590 GB: GB/T9112~GB/9124-2000, GB/T2506-1989(2005) ...

Wednesday 21 February 2024

Prix : ＞0.8USD

Product description Steel blind flange is also called blind board, and its proper name is flange cover. It is a flange without holes in the middle for sealing the pipe plug. There are many types of sealing surface, such as rise face, ring joint face, large or smalltongue face and groove face...

Wednesday 21 February 2024

Nickel titanium alloy is a type of shape memory alloy, which is a special alloy that can automatically restore its plastic deformation to its original shape at a specific temperature. Its expansion and contraction rate is over 20%, and its fatigue life reaches 1 * 10 to the 7th power...

Wednesday 21 February 2024

In refractory metals, molybdenum sheet has good thermal conductivity, electrical conductivity and low thermal expansion coefficient, has high strength under high temperature (1100~1650℃). Compared with tungsten, it can be easily processed, thus widely used in high temperature furnace...

Wednesday 21 February 2024

In the medical industry, Titanium has almost zero activity and salt solubility in the human body, the metal materials must be harmless to the human body. When metal corrodes, it can dissolve metal ions and have an impact on the cellular tissues of living organisms (human bodies). Therefore...

Tuesday 20 February 2024

Baby rocking recliner chair are designed to provide comfort and entertainment for your baby. With a variety of motions and adjustable settings, our baby rocking chair recliner are perfect for naptime or playtime. Sturdy construction and plush materials ensure safety and durability...

Tuesday 20 February 2024

Supporting Roller CIC is a more than 30 years manufacturer and reputed supplier of support roller used in cement rotary kilns, rotary type driers and so on. CIC has been specialized in designing, producing whole set of rotary machinery, so also has rich experience in supplying support device...

Tuesday 20 February 2024

Pinion Shaft CIC is a more than 50 years pinion gear shaft manufacturer and reputed supplier of forged pinion and pinion shaft widely used in various machinery equipments in the fields of mining, metallurgical, chemical industry, construction and so on. CIC possesses professional design team...

Monday 19 February 2024

Alloy steel flanges are also a type of flange material. Mainly used for special features of piping and pipelines, mostly used for high temperature and high-pressure positions. Its common materials including12Cr1MoV, 15CrMo, P91, P22,10CrMo910 and so on. Application areas: ship application...

Monday 19 February 2024

Transport Simulation Vibration Testing Machine WHAT IS TRANSPORT VIBRATION SIMULATION TESTING? As one important part of the packaging test, the transportation simulation test is to simulate the transport vibration environment in the laboratory, to evaluate the behavior of packaging...

Monday 19 February 2024

WHAT IS PACKAGE TESTING? Packaging tests or packaging testing involves the test and measurement of a characteristic or property involved with packaging. This includes packaging materials and components, packaging shape, shipping containers, and unit loads, as well as the associated...

Monday 19 February 2024

SPECIAL METAL SHEETS Looking for a special steel plate manufacturer? Welcome to Gallianz Group! Being one of the biggest professional special metal products companies in China, we offer Stainless steel sheet, Titanium sheet, and Nickel and nickel-base alloy sheet. Our available production...

Tuesday 06 February 2024

Ultrapure water is high-purity water produced by reverse osmosis technology, EDI electric desalting technology and other appropriate supercritical fine technology, which is used to develop ultrapure materials (semiconductor component materials, nano ceramic materials, etc.). The resistivity...

Monday 05 February 2024

MAGNESIUM WASTE & SCRAP Long-term supply of pure quality magnesium scrap metal: magnesium alloy AZ91D, AM60B magnesium alloy, and AM50A magnesium alloy ingot. Recycling magnesium scrap metal is of great significance: it can greatly improve the benefit of enterprises, make full...

Monday 05 February 2024

MAGNESIUM TURNING YiRui Metal provides quality metal turnings in various sizes and specifications. Our MG turnings for sale include pure magnesium powder and magnesium alloy. The chemical properties of magnesium metal turnings are active, and they are widely used in the metallurgical industry...

Monday 05 February 2024

MAGNESIUM SLAG YiRui Metal can provide quality magnesium slag. Its recovery rate is about 60%. Ingredients refer to AZ91D, and AM60B. MAGNESIUM SLAG SPECIFICATIONS Composition（%） Brand Standard Al Zn Mn Fe (max) Be (ppm) Si (max) Cu (max) Ni (max) Ca Na AZ91D ASTM 8...

Monday 05 February 2024

MAGNESIUM ROUND BAR Magnesium round bar is suitable for making extruded magnesium alloy profiles and can also be delivered directly. MAGNESIUM ROUND BAR SPECIFICATIONS Composition（%） Brand Standard Al Zn Mn Fe (max) Be (ppm) Si (max) Cu (max) Ni (max) Ca Na AS41B ASTM 3...

Monday 05 February 2024

MAGNESIUM METAL BLOCK YiRui Metal supplies all kinds of pure magnesium metal block and magnesium alloy scrap for magnesium supplier to lower the cost. MAGNESIUM METAL BLOCK SPECIFICATIONS Composition（%） Brand Standard Al Zn Mn Fe (max) Be (ppm) Si (max) Cu (max) Ni...

Monday 05 February 2024

WELDING TITANIUM PIPE HQ is a leading titanium material producer and supplier in the local market. Please feel free to contact us for more details and a quick quotation. WELDING TITANIUM PIPE APPLICATION: Widely used in aircraft hydraulic systems and chemical processing plants, and...

Monday 05 February 2024

TITANIUM FOIL SHEET As a leading titanium supplier, HQ always provide the best titanium sheets/plate with a reasonable price. We follow a strict production procedure to make sure every piece from our factory meets customers' requirements. With rich technical know-how, the very material...

Saturday 03 February 2024

ASME B 18.31 2 Double End Studs Bolt ASME B 18.31.2 double-end studs are popular in DT fastener's product range. DT could offer customers highly competitive 2 all-thread rods. In recent years, all-thread rods have been widely used, and the common ones are ASME B 18.31.2 2, etc....

Saturday 03 February 2024

DATIAN (DT) Fastener is famous for producing quality heavy hex nuts. We, one of the professional heavy hex nut manufacturers, have a in house full line heat treatment machine used to improve the hardness and mechanical properties of heavy hexagonal nuts in order to serve different...

Friday 02 February 2024

Our acss wire is mainly used in the overhead lines for electricity distribution . This acss conductor is composed of steel core reinforced core and annealed soft aluminum wire. Similar to but different from conductor acss, the aluminum wire in acss vs acsr is a hard drawn aluminum wire...

Friday 02 February 2024

Steel-core aluminum twisted pair is mainly made of aluminium clad steel and used in long-distance medium-high voltage and ultra-high voltage transmission systems, especially in areas where the lines need to be wind-proof and earthquase-proof. Mainly according to ASTM standard manufacturing...

Friday 02 February 2024

The triplex urd cable is designed for using in secondary distribution circuits. It is used in wet and dry areas and installed in duct or direct burial applications. The maximum operating temperature is not exceeding 90°C. The voltage rating is 600 volts. This urd triplex can also...

Friday 02 February 2024

The Aluminum 600V Single Conductor URD Cable is designed for using in power secondary distribution circuits. This aluminum urd cable in conduit is used in wet and dry areas and installed in duct or direct burial applications. The maximum working temperature is limited to 90°C. The...

Friday 02 February 2024

The Duplex Aluminum 600V Single Conductor URD Cable is designed for using in power secondary distribution circuits, which is also called copper urd cable. It is used in wet and dry areas and installed in duct or direct burial applications. The maximum working temperature is limited to 90°C...

Wednesday 31 January 2024

The Laminated Blockout Banner AD301M features a composite construction of two layers of PVC and a black layer in between, which enables it to achieve a high level of opacity. This makes it a popular choice for sign-making and advertising production. With its high-strength mesh PVC textile...

Wednesday 31 January 2024

Knitted Greyback Display Fabric AA720 is a high-quality display fabric that is perfect for various applications such as roll-ups, backdrops, frames, and exhibition bases. Made from 100% polyester and processed using the warp-knitted 3 bar method, this material blockout fabric is durable...

Wednesday 31 January 2024

Jelly back lit fabric AA531(B1) is a top-quality fabric material perfect for various uses, such as pop-up displays, frame systems, SEG projects, and LED light boxes. Manufactured from 100% polyester, the coated backlit fabric boasts a woven construction utilizing 150D*2X150D*2 yarn...

Wednesday 31 January 2024

Hot Laminated Frontlit Banner AD107M is also a type of banner material that is composed of two layers of PVC with a high-strength mesh fabric in between. It offers a high level of durability and is commonly utilized in sign-making and outdoor advertising. The AD107M banner material...

Wednesday 31 January 2024

Hot Laminated Banner AD102M is a type of banner material that is composed of two layers of PVC with a high-strength mesh fabric in between. This PVC advertising banner fabric is commonly used in sign-making and advertising production, where high-quality printing is required. One...

Wednesday 31 January 2024

Sound-absorbing wall and ceiling panels made of recycled polyester called Felt Sound Proofing Panels come in full wall applications, shape clusters, and individual shapes. Our Felt Sound Proofing Panels can reduce the reverb time (RT60), improve speech intelligibility, and enhance...

Wednesday 31 January 2024

With the revolutionary textile panel system acoustic folding partition, interior spaces can be designed in a way that is practical, adaptable, and efficient like never before. This system's design is based on a thin panel that is two-sided and has many potential uses. The panels can...

Saturday 20 January 2024

Quantité : no limited - Prix : USD900-USD2000/MT

Microcrystalline waxes consist of saturated aliphatic hydrocarbons. It is different from paraffin waxes in having much finer crystals. So that micro crystal wax is commonly darker, has a higher viscosity, denser, tackier, and more flexible than paraffin waxes. Depending on the different...

Saturday 20 January 2024

Quantité : no limited - Prix : USD900-USD2000/MT

KH Paraffin Wax S70H is made by deep refinement. Compared to KH Paraffin Wax S70N/L, Its carbon distribution is narrower and the branching carbon backbone is chainless, which is confined with the requirement in most industrial applications. In the processing of PVC rigid pipe, it...

Saturday 20 January 2024

Quantité : no limited - Prix : USD900-USD2000/MT

The Fischer-Tropsch Waxes are made from carbon monoxide and hydrogen in the presence of the selected catalyst. Generally, the feedstock is produced from coal or natural gas. The final synthetic waxes tend to be saturated, straight-chain hydrocarbons. Their very linear molecular...

Saturday 20 January 2024

Quantité : no limited - Prix : USD900-USD2000/MT

KH FT WAX 100 is the coal-based Fischer-Tropsch wax by hydrogen refinery. It has low oil content and good high melting point. It's the excellent external lubricant in molded plastics. Features of KH FT WAX 100 Fine crystal structure Low Viscosity White color Specifications of KH...

Saturday 20 January 2024

Quantité : no limited - Prix : USD900-USD2000/MT

What Is Melting Point of Wax? High melting point paraffin wax is ideal for various industrial fields, such as paper, PVC, adhesives, coating, ect. King Honor's wax with high melting point has the melting point of hard paraffin from 64℃ to 72℃ with white color, low oil content, and...

Saturday 20 January 2024

OVERVIEW OF stainless steel seamless pipe china Stainless steel is a versatile material comprised of a steel alloy and a small percentage of chromium, which adds to the stainless steel's corrosion resistance, a trait that earned stainless steel its name. Because stainless steel is...

Saturday 20 January 2024

OVERVIEW OF STAINLESS STEEL FLAT BAR China stainless steel flat bar is a versatile material that can be found in a variety of applications including architecture, medical equipment, packaging equipment. Thanks to its workability, stainless steel flat bar is easy to weld, cut-to-length...

Saturday 20 January 2024

OVERVIEW OF SSAW/SAWH SSAW steel pipe are made of narrower hot rolled plates/coils, which lowers their costs. The diameter of the spiral welded steel pipe can be very large, suitable for transporting large amounts of oil and natural gas. FEATURES OF SSAW PIPESAWH 1 SSAW /SAWH offer...

Saturday 20 January 2024

OVERVIEW OF SEAMLESS STEEL PIPE Seamless steel tubes and are made from round steel billets. The billets must be heated firstly. After heating, a hollow tube will be formed by cold drawing or hot expanding. Due to this special process, the seamless steel pipe for sale does not have...

Saturday 20 January 2024

OVERVIEW OF REBAR STEEL Rebar China, also frequently referred to as reinforcing steel or reinforcement steel, is a type of steel bar or mesh of steel wires used as a tension device in reinforced concrete and masonry structures to strengthen the concrete under tension. It is also able...

Friday 19 January 2024

Heavy Engineering Parts WALKSON specializes in manufacturing quality heavy equipment aftermarket parts, spare parts for heavy equipment, large size mechanical components for Customers for various industrial sectors. we have delivered high-quality cast, welded, and forged parts for many customers...

Friday 19 January 2024

Globel Valve Walkson provides castings or forgings for globe valve components/stop valve components, consisting of Valve Body, stem and plug. Why Choose WALKSON Globel Valve Available material includes carbon steel, low alloy steel, stainless steel for our quality stainless steel fabrication...

Friday 19 January 2024

Gate Valve Main parts for Gate valve consist of Valve Body, Bonnet, Disc, arm, shaft, guide and valve seat. Those parts of a big gate valve, chain operated gate valve, or high pressure gate valve can be made either from gate valve castings or forgings. Available material by WALKSON...

Friday 19 January 2024

无缝不锈钢管是由不锈钢棒材穿孔，然后冷轧或冷拔制成的管材。 ASTM A312、A269、A213、A790 牌号：304/L、316/L 双相2205、2507等 Localisation : 25th floor, C3 Building, Wanda Plaza, Kaifu District, Changsha, Hunan Province, China, 410000 Changsha, Personne à contacter : Winnie Wong, +8615308477503

Friday 05 January 2024

Feature: Bopp film as backing coated with acrylic water based adhesive, good adhesion. High tensile strength. Low noise. Application: Widely used for carton sealing, auto-packing machine, bundling and brand publicity. Specification of Low Noise Bopp Tape Product Total Thickness...

Friday 05 January 2024

Feature: Gauze fiber and PE particles as the base material. Coated with synthetic rubber, good adhesion, high peel. Application: Widely used in book packaging, packaging can not be warped. Specification of Hot Melt Cloth/fabric duct tape Product Adhesive Total Thickness Initial...

Friday 05 January 2024

Feature: adhesive bopp tape as backing coated with hotmelt adhesive with good adhesion. Environmentally friendly and non-toxic . Application: Widely used for carton sealing, auto-packing machine, bundling. Specification of hot melt bopp tape Product Total Thickness Peel Adhesion...

Friday 05 January 2024

SSR-C1 is a stainless steel cable railing system that is a popular choice for residential and commercial projects. These cable railings provide great aesthetics and flexibility in any setting indoors or outdoor whether running horizontally or vertically. Each cable railing's hardware...

Friday 05 January 2024

Linen stainless steel linen finish has a textured surface that resembles linen fabric. This finish is achieved by pressing the steel sheet with a patterned roller. It is commonly used in architectural applications, such as wall coverings, elevator panels, and decorative accents. Specification...

Thursday 04 January 2024

General Introduction of Steel Billet Prime steel billets are the second stage product in steel production. They belong to hot rolling and directly made and formed in the process of steel smelting, belonging to the category of casting semi-finished products. Their final products involve...

Thursday 28 December 2023

Low-temp flanges are widely used in the manufacture of flanges and fittings, as well as in applications where low-temperature service is required and corrosion resistance is not critical. LOW-TEMP FLANGES PROVIDED BY YUHONG As one of the professional industrial flanges manufacturers in China...

Thursday 28 December 2023

A low-temperature alloy is a general purpose carbon steel, usually in the normalized, normalized, and tempered or quenched and tempered condition. It is typically characterized by moderate strength and impact toughness and is widely used in the manufacture of flanges and fittings...

Thursday 28 December 2023

Inconel flange is suitable for harsh environments at high temperatures and pressures with good mechanical properties. As a professional Inconel flanges manufacturer in China, Yuhong Group provides quality Inconel flanges including: Inconel 600 flanges, Inconel 601 flanges, Inconel 625 flanges...

Thursday 28 December 2023

Good resistance makes INCONEL suitable for Inconel pipe fitting in harsh environments at high temperatures and pressures. When the Inconel alloy is heated, a thick and stable oxide layer is passivated on the surface of the alloy to protect the interior of the alloy from corrosion...

Thursday 28 December 2023

Yuhong incoloy 800h flange&incoloy 825 flanges use Incoloy alloy 800&825, which is a nickel-iron-chromium base superalloy, to ensure great carbonization and oxidation resistance even in high-temperature environments. INCOLOY 800&825 FLANGES PROVIDED BY YUHONG Incoloy class...

Thursday 28 December 2023

Incoloy is a nickel-iron-chromium base superalloy that resists carbonization and oxidation in high-temperature environments. Incoloy metal alloys are easy to manufacture, using the same machines and processes as stainless steel. Incoloy fitting is primarily chromium and nickel-based...

Thursday 28 December 2023

6063 Plate China 6063 aluminum plate has generally good mechanical properties and is heat treatable and highly wieldable. Application of 6063 Brushed Aluminium Plate 6063 aluminium plate mainly used insigns, billboards, building exterior decoration, bus body, high-rise buildings...

Thursday 28 December 2023

6061 Aluminium Tube aluminium round tube is a kind of non-ferrous metal tube, which is made of pure aluminum or aluminum alloy by extrusion and is hollow along its longitudinal length. It can have one or more closed through holes with uniform wall thickness and cross section. Application...

Thursday 28 December 2023

China 6061 Aluminum Sheet The combination of magnesium and silicon in 6061 aluminum allows it to be heat treated to higher strength levels. It has good formability when in the fully soft, annealed condition and the strength can be significantly increased following a heat treatment...

Thursday 28 December 2023

6061 Aluminium Round Bar Aluminum Round bar ( Rod ) may be cold finished or extruded and Aluminum Round Bar (Rod) is availble in various alloys offering a range of weldability, corrosion resistance and machinability. High strength Aluminum Round Rod can be used in aerospace applications...

Thursday 28 December 2023

6061 Aluminium Checkered Plate Aluminium checker plate or 'aluminium chequer plate', a china aluminum tread plate is a type of metal tread plate that has distinctive raised bars that give users a non-slip surface, making it super versatile for many industries. As well as being slip-resistant...

Thursday 28 December 2023

China 5754 Aluminum Sheet The 5754 sheet magnesium alloy content is between 2.6-3.6, which is a typical aluminum alloy plate in the Al-Mg series alloy. Application of China 5754 Aluminum Sheet 5754 aluminum sheet is the main material used in the automobile manufacturing industry (car doors...)

Thursday 28 December 2023

For over 25 years, Atlas metal has manufactured torsion springs, compression springs, and extension springs using bending stainless steel wire because of its mechanical properties and corrosion resistance. We manufacture springs using several stainless steel grades including 302, 304...

Tuesday 26 December 2023

Quantité : 10000TONS - Prix : 1099-1199USD/TON

ASTM : A312 TP 304/304L/304H/316/316L/317/317L/321/310/ 347/904L, etc. Autres : Duplex, Super Duplex, Monel, Nickel, Inconel, Hastelloy Taille : jusqu'à 48 po NB. (Sans couture et soudé) Épaisseur de paroi : Sch. 5S à Sch. XXS Localisation : No.468,Tongzipo West Road, High-tech Industrial...

Saturday 09 December 2023

Egret so-called double sided tissue tape is used a lot for bonding different materials, and for refrigerator metal parts fixing. Normally is coated with natural rubber glue or solvent based acrylic adhesive on both sides. Plus, this tissue tape double sided has silicon paper liner...

Saturday 09 December 2023

CR foam tape stands for chloroprene rubber foam tape. CR is chloroprene (neoprene) as the main raw material for alpha polymerized elastomer, soluble in toluene, xylene, ethylene dichloride, three vanadium ethylene, slightly soluble in acetone, methyl ethyl ketone, ethyl acetate and cyclohexane...

Saturday 09 December 2023

Egret so-called BOPP tape wholesale is used a lot for packaging and courier industries. This wholesale BOPP adhesive tape has both transparent, white, yellow color; main thickness is 40 mic and 50 mic. Normally the pp tape is coated with hot melt glue or water based acrylic adhesive...

Saturday 09 December 2023

Egret so-called bi directional tape aka cross filament tape is used a lot for refrigerators & packing industries. It is transparent color. Normally is coated with synthetic rubber resin glue. Plus, it has no liner. The base material is BOPP or PET, laminated fiber glass, which...

Saturday 09 December 2023

Quantité : 1-100 tons

ANSI/ASME B18.2.2 Square Nuts ANSI/ASME B18.2.2 square flange nut can be turned with a square wrench. One of the first quality fasteners, the square nut is regarded by many as an easy-to-use fastener that holds even the most difficult parts. The first version of the square nut was...

Tuesday 05 December 2023

The half inch and 1 inch pex ball valve provided by Carbo, a professional pex ball valve factory, has good wear resistance. The reason for the OEM ball valve wear resistance is that the valve core when it is sealed is welded with alloy steel, and its sealing ring is also welded with alloy steel...

Tuesday 05 December 2023

In the field of valves, cold expansion ball valve is a top-mounted ball valve with a thermal expansion and contraction compensation structure, including a valve body, a valve ball, a valve seat and a valve cover. This new OEM ball valve is characterized in that: the valve seat is...

Saturday 02 December 2023

Quantité : 50000tons - Prix : 750-899usd/ton

Produit : Tuyau en acier LSAW diamètre extérieur : 12 à 64 pouces Épaisseur de paroi du tuyau : 5-50 mm longueur : 6-18 mètres Norme : API5L,API5CT, ASTM, JIS, DIN, EN, API, BS,AWWA,JZS Nuance d'acier : GR.A-GR.C,X40-X70,S235,S275JRH,S335JRH,L 245-L485 (PSL1/PSL2 est disponible) Utiliser...

Saturday 02 December 2023

Product description Boiler Tubes Description HUASHANG has the cold draw computing device which is 70 meters long, can produce fifty-three meters long for every pipe. With the advanced technological know-how from Korea and Japan, it makes the extra close dimension controls. HUASHANG...

Saturday 02 December 2023

Product description Lap Joint Flanges Features Forming: forged Stainless Steel Lap Joint Flanges Lap Joint Flanges Materials Stainless Steel: OCr18Ni9, 0Cr18Ni9Ti, 1Cr18Ni9Ti, 0Cr18Ni12Mo2Ti, 00Cr19Ni10, 00Cr17Ni14Mo2, ASTM A182-F304, F304L, F304H, F316, F316L, F321, F321H, F347H...

Saturday 02 December 2023

Product description Precision Tubes Description Precision steel pipe features in large size, high precision, smooth surface inside and outside, precision steel tubing suppliers and precision steel tube manufacturers produces no oxide film on the surface inside and outside of the steel...

Saturday 02 December 2023

Product description Hydraulic Tubing Steel Description Huashang Hydraulic tube in a comprehensive range of corrosion-resistant stainless steels and nickel alloys protecting outdoor diameters from (OD) 2.0 to 38 mm. All sizes are provided with clean surfaces and shut dimensional tolerances...

Saturday 02 December 2023

Quantité : 20000tons - Prix : 750-800USD/ton

Produit：ERW tuyaux en acier Norme : ASTM A53/ASTM A500/API 5L/EN10217/BS/ASTM A312/A304 Nuance d'acier : GR.A/GR.B/X42/X46/X52/X56/X60/X65/X70/ST 52 diamètre extérieur：21.34mm-610mm Épaisseur de paroi du tuyau：4mm-30mm Longueur unique：Longueur aléatoire/longueur fixe Surface：Nu/Vernis...

Friday 01 December 2023

Quantité : 1 - Prix : 99,00 €

Fabtech Stainless are one of the leading suppliers, exporters, wholesale dealers of stainless steel sheets, Jindal Stainless 310S Sheets, stainless steel plates, stainless steel HR sheet, Jindal Stainless 310S Plate, stainless steel CR sheets, stainless steel coils suppliers, stainless...

Thursday 30 November 2023

TITANIUM ROUND BAR Titanium round stock is a very popular go-to for many products. It requires a much more automated process to make than plate and block, which still involves a manual process. Round bar lends itself to a multitude of products, from fasteners to jewelry. STANDARD...

Thursday 30 November 2023

TITANIUM PIPE FITTING HQ is a leading titanium material producer and supplier in the local market. Please feel free to contact us for more details and a quick quotation. TITANIUM PIPE FITTING APPLICATION: Widely used in petroleum, chemical industry, electric power, metallurgy, chemical fiber...

Thursday 30 November 2023

TITANIUM HEXAGONAL BAR HQ is a leading titanium material producer and supplier in the local market. Please feel free to contact us for more details and a quick quotation. TITANIUM HEX BAR APPLICATIONS Electroplating industry and metal pickling treatment of pendant and pendant production...

Wednesday 29 November 2023

Port: Shanghai, China Production Capacity: 20000T/Year Payment Terms: T/T; L/C Process: Aluminum liquid forging(Aluminum squeeze casting) Application: Bosch GX2motor Material: A356.2 Place of Origin: Suzhou; China Weight: 0.83kgs Package: Carton/Wooden case OEM...

Tuesday 14 November 2023

Rods, also known as studs, are a kind of fasteners used in a helical structure. Similar to the physical appearance of a screw, a rod causes rotational movements in use. Threaded rods combine linear and rotational movement to create strong resistance to pressure. As one of the professional...

Tuesday 14 November 2023

Wholesale S235JR Pipe Q235 tubes are used to deliver low-pressure fluids. Such steel is generally smelted by the converter or open-hearth furnace. The main raw material is molten iron and scrap steel. The content of sulfur and phosphorus in steel is higher than that of high-quality...

Tuesday 14 November 2023

Q195 Steel Pipe For Sale The Q195 welded pipe(also called Q195 steel tube and Q195 steel pipe) is used to deliver low-pressure fluid. Generally welded are made of Q195A, Q215A and Q235A steel. It can also be made of other mild steel that is easy to weld. The Q195 steel pipe is subjected...