MODIFIED - 826 Annonces

Vendredi 03 novembre 2023

Conventional Single Column Vertical Lathe Servo motor and gearbox directly drive the Ballscrew for X&Z axis feeding. It makes the machine better accuracy and fast-moving. The machine can equip a handheld unit for easy control. Full cover is optional together with a chip conveyor...

Jeudi 26 octobre 2023

PVD COATING Physical vapour deposition, just ar PVD coating, as we usually call it, refers to vacuum ion plating and vacuum sputter plating; Generally speaking, ncvm coating refers to vacuum evaporation coating. The basic principle of PVD surface treatment is to vaporize the coating...

Jeudi 26 octobre 2023

Collagen Good For Eyes In practical applications, recommended collagen is often modified by certain methods to avoid the shortcomings of collagen preparation materials, improve the tensile strength and anti-degradability of collagen, reduce the expansion rate, and improve the mechanical...

Jeudi 26 octobre 2023

Collagen Application Collagen peptides can be widely used in liquid dairy products such as neutral milk beverages, acidic milk beverages, fresh milk, yogurt, etc., to prevent whey precipitation and stabilize emulsification. It can also be added to milk powder, which can not only...

Jeudi 26 octobre 2023

Prix : USD900-USD2000/MT

Classification of High Melting Point Polypropylene Wax Products: Plastic Additives Product Description: This product has the characteristics of high melting point, low melting degree, good lubricity, and dispersion. It is an excellent additive for polyolefin processing at present...

Jeudi 26 octobre 2023

Prix : USD0.1-15

Terminal Blocks & Connectors Terminal blocks are electrical connectors used in higher-current input and output connections attach wires, which can install two-wire in the same circuit without having electrical wires cut or splice, easy to install and prevent from creepage cause of splice...

Jeudi 26 octobre 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

Automotive Water Intake Manifold Injecting gas through the nozzle is a typical method used in rod-shaped products, because this method does not require frequent changes to the mold and is versatile, but the disadvantage is that the nozzle needs to be modified and the single-use cost is high...

Mercredi 25 octobre 2023

Quantité : 30000 squa - Prix : 100-200RMB

Epoxy coil floor products using the most advanced technology and automation equipment production, product quality is stable, diversified varieties, and low carbon environmental protection. Compared with PVC floor, epoxy floor, etc., it has excellent performance, such as super pressure resistance...

Mercredi 25 octobre 2023

Modified polyolefins are a group of materials with improved properties compared to regular polyolefins. These polymers are created by modifying the polymer structure through the addition of functional groups. acid modified polyolefin offer enhanced mechanical, thermal, and chemical...

Samedi 21 octobre 2023

The material is obtained by grinding the coarse powder (D50 is 13 micron ~ 75 microns) . It can be used as moulding material, spraying material and composite modified pre-dispersion. FAQs of Grade PF PEEK Powder Properties of Grade PF PEEK Pure Resin Fine Powder Polyetheretherketone...

Samedi 21 octobre 2023

PEEK-GL series, is a glass fiber composite modified PEEK materials, currently available from 5% -35% of different mass fractions of reinforced materials. Compared with pure resin particles, it has better rigidity, better creep resistance and dimensional stability. FAQs of Grade GL...

Samedi 21 octobre 2023

PEEK-FC series modified by PTFE, graphite and carbon fiber have lower friction coefficient, wear resistance and self-lubrication than pure resin G. FAQs of Grade FC Super Wear Resistant PEEK PEEK wear resistance of Grade FC Super Wear Resistant PEEK PEEK (polyetheretherketone) materials...

Vendredi 13 octobre 2023

300W DC to AC inverter comes with 1 AC outlets provide with continuous 12V/24VDC to 100V/120V/230VAC power rated 300W (600W peak). The 300W DC to AC inverter takes little space with compact size( 237mm*150mm*81mm) and lightweight ( 1.4kgs). It is also called 300 watt pure sine wave...

Vendredi 13 octobre 2023

A dependable and effective embedded MultiMediaCard solution is now available: the Kimtigo eMMC5.1. This eMMC5 1 module guarantees flawless and efficient operation in a variety of embedded applications because of its quick and effective data transfer rates. Applications in the automotive...

Lundi 09 octobre 2023

Prepainted Steel coil is hot galvanized plate, hot galvanized aluminum zinc plate, galvanized plate and other substrates, the surface pretreatment (chemical degreasing and chemical conversion treatment), on the surface coated with a layer or several layers of organic coating and then...

Mardi 26 septembre 2023

PA66 GF 15 Heat Stabilized (A2006C, A2016C) for Engineering PlasticsPA 66 GF 15 is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding.Anmei PA66 GF15 Storage and Handling PRE-PROCESSING： Pre-drying: 4-6h / 130°C Processing: Melting temperature...

Mardi 26 septembre 2023

Anmei focuses on the production of modified engineering plastics. We have polyamide PA66 modified products with properties of heat-resistant, reinforced, toughened, flame-retardant, wear-resistant, weather-resistant, oil-resistant and conductive. According to the characteristics of your product...

Mardi 26 septembre 2023

Why Nylon Has High Tensile Strength Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering PlasticsUsing Polyamide 66 as the basic resin, the nylon 66 tensile strength is obtained by blending and modifying with the addition of a toughening agent. The flexural strength...

Mardi 26 septembre 2023

Nylon66 PA66 Heat Stabilized Description Nylon66 PA66 Heat Stabilized a high temperature nylon made by the polycondensation of terephthalic acid and hexamethylene diamine. Heat stabilized nylon 6 has the properties of low water absorption, excellent heat resistance, goodprocessing fluidity...

Mardi 12 septembre 2023

This is a Wall-mounted LiFePO4 deep cycle battery, there are two types, 100ah lithium ion battery and 200ah lithium battery 12v, wall-mounted design, easy installation, easy management, maintenance-free smart battery. Features of 6000 Cycles BAK IP65 51.2V 100/200Ah Wall-mounted LiFePO4...

Samedi 09 septembre 2023

Plant Based Bags GoodBioPak adopts independently-developed biodegradable modified raw materials, so as to improve the stability of product performance. It has established an efficient industrial chain, which not only reduces the cost of raw materials for customers, but also develops...

Jeudi 07 septembre 2023

Name: Methyltrichlorosilane (M1) Feature: This product is a colorless transparent liquid. It is the main material of silicone products to produce methyltriethoxysilane and silane crosslinking agent (methyl triethoxysilane and methyltrimethoxysilane), and produce silicon resin, special coatings...

Jeudi 07 septembre 2023

Regular butyl rubber IIR is a copolymer rubber of isobutylene and isoprene. Butyl rubber has excellent impermeability to gas diffusion, and the long polyisobutylene segments of its polymer chains give it good flex properties. It is generally odorless and tasteless, though it may...

Mardi 05 septembre 2023

Quantité : 300sets/mo - Prix : 7800-200000USD

Features of Rotary Vacuum Filter Processing Capacity: 0.2-0.3Tons/h/m2 Application Scope: Cassava or potato starch dewatering Product Introduction: Rotary vacuum filter, rotary vacuum dehydrator, cassava dewatering machine, cassava starch dewatering machine for cassava starch processing...

Samedi 02 septembre 2023

Oue company strive to supply high quality of cold work die steel, and the HS DC53 is an important one. As high-toughness high-wear-resistance cold work die steel, HS DC53 equivalent, can be applied to stamping dies and cold forging dies, which is dc53 steel equivalent, 1.2990 steel...

Samedi 02 septembre 2023

As modified cold work tool steel, HS A4 is improved high-toughness impact-resistant cold work die steel. It has fine and uniform ledeburite carbides, high toughness and impact resistance, and is not easy to crack when used for molds with complex shapes. The steel is a new generation...

Samedi 02 septembre 2023

HS 2738 steel is modified pre-hardened mirror plastic mold steel. Key technologies of alloy composition optimization and organization control ensure that the module has high hardness uniformity, excellent polishing performance and processing performance at the largest cross-sectional size...

Vendredi 25 août 2023

Quantité : 1000t/m - Prix : 25kg/bag

Antiblock masterbatch for Engineering Plastics Anmei, one of the professional plastic master batch manufacturers, has a range of customized masterbatches available which incorporate antistatic masterbatch, for use in different polymers and applications. It is to prevent unbearable...

Vendredi 25 août 2023

Quantité : 1000t/m - Prix : 25kg/bag

Antibacterial Masterbatch for Engineering Plastics Polymer anti-bacterial masterbatch is a kind of masterbatch material that adds antibacterial agents into the carrier resin, which is offering antimicrobial protection for plastic products and reduces the growth of harmful organisms such as molds...

Vendredi 25 août 2023

Single Screw Plastic Waste Granulator The single screw waste plastic granulator is mainly suitable for extrusion and granulation of raw materials, which is not only clean or single with stable components and low moisture content, but also has no need for secondary plasticization,...