VULCANIZATION - 202 Annonces

Monday 30 September 2019

Dice: Blue(InGaN）) Operating Temperature: -40～+80℃ Soldering Temperature：260for10sec℃ Super High Power Consumption Various Colors And Types Available. Resin(Mold): Silicone Reverse Voltage: 5V Storage Temperature: -40～+100℃ Pulsed Forward Current 150mA (Duty 1/10,Pulse Width 0.1mS...)

Saturday 24 August 2019

Quantité : 500KK/Mont - Prix : USD 3.1 Above

SMD color consistency is good. The dispensing process adopts centrifugal technology to enhance the uniformity of the light spot and good heat dissipation. Product Advantages of Rgb Smd Led Chip All colors included customized wavelength. Red light: 620-630NM (R620), Green light: 520-530NM(G520)...

Friday 29 March 2019

Graphite is an isoform of element carbon. In 1971, the United States studied the successful flexible graphite sealing material, which solved the leakage of atomic energy valve. After deep processing, the flexible graphite becomes an excellent sealing material, which are made into...

Tuesday 28 August 2018

Quantité : at least 4 - Prix : USD 10-470

GX-N 100G military defense vibration isolator is total different from the GH series. With oval rubber pad in, the big impact shock of this model can be up to 100G. The nominal load of GX-N is from 10N (1.02kg) to 60N (6.12kg). With the oval type rubber pad in, combined tightly with...

Wednesday 15 August 2018

This kind of rubber car grommets are widely used in automobile and various mechanical and electronic equipment field, dustproof and shock absorption, effectively extend its service life. High quality EPDM rubber material has the characteristics of anti-aging, good elasticity, oxidation...

Friday 20 April 2018

Quantité : 200 - Prix : 10 usd/kg

HY-F663 Foaming Silicone Rubber F3 Foaming Silicone Rubber Description HY-F663 is a RTV-2 liquid silicone rubber, general called two-component room temperature vulcanization silicone, part A is silicone rubber, part B is catalyst / curing agent. Foam silicone is platinum cure silicone...

Friday 20 April 2018

Quantité : 200 - Prix : 10 usd/kg

HY-9055 Electronic Potting Compound Description HY-9055 is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature...

Friday 20 April 2018

Quantité : 200 - Prix : 10 usd/kg

HY-Y820 life casting silicone is kind of two-component platinum catalysed liquid silicone. The product is colorless or skin-colored oily liquid, and can be very soft and elastomeric after vulcanization. HY-Y820 are mainly used for Breast enhancer, body organ, dolls, toys, silicone prostheses...

Friday 15 September 2017

Quantité : 17 - Prix : 1 400,00 €

Products Specification： Property Test Method and Unit Specification Range Softening Point Ring&Ball,°C 90-150 Color Gardner,50%Toluene Solution 3-20 Acid Value mgKOH/g 0.5 max Ash Content wt.% 0.5 max Applications: A. Paints Industry: In paint industry mainly...

Friday 15 September 2017

Quantité : 17 - Prix : 1 400,00 €

Products Specification： Property Test Method and Unit Specification Range Softening Point Ring&Ball,°C 90-150 Color Gardner,50%Toluene Solution 3-20 Acid Value mgKOH/g 0.5 max Ash Content wt.% 0.5 max Applications: A. Paints Industry: In paint industry mainly...

Thursday 06 April 2017

Resins Characters: C9 aromatic hydrocarbon resin is a petroleum by-product of pyrolysis C9 fraction which is produced by pre-treatment, polymerization and distillation processes. It is not a high polymer but a low polymer molecular weight between 300-3000. Light colored granule Low acid value...

Thursday 02 March 2017

Description of Silicone Rubber for Food Grade Molds Silicone Rubber for Food Grade Molds is general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance. Add curing agent of 3% at the room temperature, the silicone...

Friday 28 October 2016

Quantité : 1 - Prix : USD 1

Which kind of glue can be used for belt splicing? Which kind of glue can be used for belt splicing? In fact, this is asking for the types of belt spli cing glue, this is decided by the vulcanizing methods, so how many kinds of splicing methods that ha ve? Belt splicing methods can...

Friday 30 September 2016

Quantité : 1 - Prix : USD 1

What high strength bonding glue should we use for bonding conveyor belt ? Conveyor belt which transfer materials in industry and mining easily slip and is damaged ,such as be scratched by scraper or be injured by a crashing object, which will effect the normal work of the industrial...

Saturday 24 September 2016

Quantité : 1 - Prix : USD 1

Which glue can be used for steel cord belt hot splicing joint? Compared with Nylon and fabric belt, steel cord belt is very strict when choose glue, why say it? St eel cord conveyor belt has very strong tensity, usual glue can not reach this kind of tensity and ea sily cracking....

Tuesday 30 August 2016

Prix : 10,00 €

Silicone gel for electronic components encapsulation●Introduction2-Component Addition Cure Silicone Rubber, colorless clear liquid, vulcanizes to a very soft silicone gel, Can be made soft silicone rubber products such as breast pad, shoulder pad, patch, non-slip mat etc. This silicone...

Friday 05 August 2016

Quantité : 1 - Prix : USD 1

What's the usage of repair strip purchased in power plants? As important transport system in power plant ,conveyor belt will affect the efficiency of the entire enterprise in case of halting. Repair strip can made conveyor belt back to work immediately after being repaired...

Tuesday 05 July 2016

Properties: White powder (granule). Density is 1.41. Soluble in 1% NaOH solution, CS2, benzene, chloroform, slightly soluble in , insoluble in gasoline. Application: Used for NR, IR, SR, SBR, NBR, EPDM and their latexes. A fast curing primary or secondary effective ultra-accelerator...

Tuesday 05 July 2016

Properties: White powder (granule). Density is 1.41. Soluble in 1% NaOH solution, CS2, benzene, chloroform, slightly soluble in , insoluble in gasoline. Application: Used for NR, IR, SR, SBR, NBR, EPDM and their latexes. A fast curing primary or secondary effective ultra-accelerator...

Tuesday 05 July 2016

Properties: White powder (granule). Density is 1.41. Soluble in 1% NaOH solution, CS2, benzene, chloroform, slightly soluble in , insoluble in gasoline. Application: Used for NR, IR, SR, SBR, NBR, EPDM and their latexes. A fast curing primary or secondary effective ultra-accelerator...

Wednesday 29 June 2016

Properties: Light yellow or orange crystal (granule). No poison with a little odor of ammonia. The density is 1.34-1.40. Soluble in benzene, acetone. chloroform, insoluble in water, acid, and alkali with lower concentration. Application: An excellent delayed accelerator. The performance...

Tuesday 10 May 2016

Model: AN-061 Name: Silicone Bracelet Customization: LOGO Production Technology: Injection Molding Material: Environmental Silicone Size: Φ150/160/180/190/202/210*12/25*2mm/Custo mizable Type: 1.Engraving silicone bracelet: Engraving the texts on mold existing directly,if order...

Friday 15 April 2016

Name: Silicone Bracelet Model: AN-061 Customization: LOGO Production Technology: Injection Molding Material: Environmental Silicone Size: Φ150/160/180/190/202/210*12/25*2mm/Custo mizable Type: 1.Engraving silicone bracelet: Engraving the texts on mold existing directly,if order...

Thursday 07 April 2016

Applications: A. Paints Industry: In paint industry mainly use the high softening point of C9 aromatic hydrocarbon resin which can increase the gloss of paint and improve the adhesion, the hardness and the resistance ability of ac id and alkali. B. Tire and Rubber Industry: Natural...

Wednesday 30 March 2016

Quantité : 200KG - Prix : 10.98USD

Performance of environmental non-toxic life casting silicone raw material for toys Performance of environmental non-toxic life casting silicone raw material for toys has good mechanical performance, chemical stability with features of waterproof, corrupt resistance, physiological inert...

Wednesday 30 March 2016

Quantité : 200KG - Prix : 10.98USD

Features and applications of Anti-yellow Electronic potting addition silicon rubber for encapsulating LED display It is a kind of low viscosity, Inherent flame resistance, two components addition cured potting silicone with heat-conducting. It cures with both on room temperature...

Friday 18 March 2016

Quantité : 60t/Month - Prix : USD9.25 / kilogram

Performance of liquid life casting silicone rubber for toy making life casting silicone rubber for toy making,liquid silicone has good mechanical performance, chemical stability with features of waterproof, corrupt resistance, physiological inert, non-toxic, tastelessness, aging-resistance...

Friday 18 March 2016

Quantité : 60t/Month - Prix : USD8.52 / kilogram

Description of Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds: Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds is general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance...

Thursday 13 August 2015

Quantité : 8000kg - Prix : 8usd/kg

1. Product Feature of Electronic Potting Silicone Rubber HY-9055 silicone rubber is a kind of low viscosity, Inherent flame resistance, two components additi on cured potting silicone with heat-conducting. It cures with both on room temperature and heated te mperature. It has the...

Friday 07 August 2015

Quantité : 8000kg - Prix : 8usd/kg

1. Product Feature of Electronic Potting Silicone Rubber HY-9055 silicone rubber is a kind of low viscosity, Inherent flame resistance, two components additi on cured potting silicone with heat-conducting. It cures with both on room temperature and heated te mperature. It has the...