SOLDER - 456 Annonces

Mardi 30 novembre 2021

Prix : 3 users after paymen

The types of SMT printer machine are divided into three parts: 1. Manual printing table 2. Semi-automatic solder printer machine 3. Fully automatic solder printer. The solder stencil printer is a device that prints solder paste onto the PCB board, and it is the device that has the...

Mardi 30 novembre 2021

Prix : 3 users after paymen

The automatic SMT solder paste mixer machine uses the revolution to generate centrifugal force, and the force generated by the rotation at an angle of 45 degrees with the revolution axis makes the solder paste at the upper end of the tank continuously move downwards, while the solder...

Dimanche 28 novembre 2021

The glass fiber cloth in PCB (or printed circuit board) is one of the raw materials of copper clad laminate, which is woven from glass fiber yarn, which accounts for about 40% (thick board) or 25% (thin board) of the cost of the copper-clad board. Therefore, PCB laminate models include FR-4...

Mercredi 10 novembre 2021

ZF Electronics, as one of the top custom circuit board manufacturers and pcb manufacturing companies in China, can provide customers with single-sided PCB, double-sided FR4 PCB, metal core PCB, heavy copper PCB, rigid PCB and rigid-flex PCB. With excellent electrical properties, heat...

Mercredi 10 novembre 2021

This is a ready to use NFC antenna that can work in 13.56MHz. At the end of the wire, the dielectric material is stripped off, which helps you solder the NFC antenna to your device, or plugin to the breadboard. Cowin support to custom antenna and has a R&D team with 20 engineers...

Vendredi 29 octobre 2021

Quantité : 2000000PCS - Prix : 0.1- 6Yuan

Huge Diam 20mm Photoresistor φ20series for Led DimmerOverviewA photoresistor (or light-dependent resistor, LDR, or photo-conductive cell) is a light-controlled variable resistor. The resistance of a photoresistor decreases with increasing incident light... φ20 Series High Quality...

Vendredi 29 octobre 2021

Quantité : 2000000PCS - Prix : 0.1- 6Yuan

Infrared Thermopile Sensor ISB-TS45HISB-TS45H Infrared Thermopile Sensor can be widely used in non-contact temperature measurement. Ir Thermopile Sensor ISB-TS45H Infrared Thermopile Sensor ISB-TS45DInfrared Thermopile Sensor can measure the temperature without contact by detecting...

Jeudi 28 octobre 2021

Rapid rate environmental stress screening chambers are meant to test the durability of your product for long term storage or operation in these environments. Temperature cycling between high and low temperatures will create accelerated thermal fatigue of solder joints, seals, and...

Jeudi 21 octobre 2021

When manufacturing plenty of PCB boards, it is impossible to solder parts by hand. You will need PCB instruments to complete this step, to make a bare board, and assemble all parts onto the printed circuit board. There are many issues to consider at each stage of the assembly process...

Vendredi 01 octobre 2021

Thermoelectric modules, Peltier modules,Thermoelectric cooling modules , Te modules , TEC,Themoelectric cooling , Thermoelectric, peltier cooling. TEC1-12706 Size: 40*40*3.8mm Internal resistance: 1.98 Ohm +/- 10% Imax.: 6.0 A Vmax.: 15.4 V Qmax.: 53.3W Tmax.: 68 degree Solder melting point...

Vendredi 10 septembre 2021

Lead-free HASL is to coat a layer of tin-lead alloy on the copper surface to prevent the oxidation of the copper surface and provide a good welding base for the subsequent assembly process. What is hot air leveling? It is actually a process of combining dip soldering and hot air leveling...

Samedi 14 août 2021

Prix : USD 0.5-3

We are a abrasives supplier and supply products for deburring, sandpaper flap disc, flap wheel metal polishing, flap discs for steel, flap disc for sanding wood, disc flap, polishing flap disc, rust, discoloration, welding preparation, surface treatment and so on. With longer life...

Mercredi 11 août 2021

Quantité : 200,000 pc - Prix : 5-2500

Membrane touch switches are a kind of electronic switch, also called membrane switch, hmi touch panels or backlit membrane switch. When the operator presses the button of membrane touch switch, the circuit will be activated. On the contrary, when the finger leaves the button, the...

Mercredi 28 juillet 2021

Flame retardant heat shrinkable tubes are made of radiation crosslinked polyolefin materials with excellent physical, chemical and electrical properties. Their main functions are electrical insulation of connectors, anti rust and anti-corrosion of solder joints, mechanical protection...

Samedi 24 juillet 2021

Widely used in wire connection, solder joint insulation protection, wire end treatment resistance, insulation protection of capacitors, wire mark and end metal tube, rod rust protection, antenna protection. If you have any other requirements, Please feel free to contact us. Localisation ...

Samedi 17 juillet 2021

Prix : $90-$10000

Bao-1500 mobile welding fume extractor is suitable for filtering fume in single station such as manual arc welding, argon arc welding and secondary welding. When bao-1500 works, the high-performance fan produces negative pressure, which sucks smoke and waste gas into the filter. The...

Samedi 10 juillet 2021

Speedapcb - The pcb supplier in China, established in 2014, is located in Changsha, Hunan Province. The company focuses on high-speed PCB design, printed circuit board manufacturing, SMT welding processing, and supply chain services. Products are widely used in communications equipment...

Mercredi 09 juin 2021

ZF Electronics, as one of the top circuit board supplier in China, can provide customers with single-sided PCB, double-sided FR4 PCB, metal core PCB, heavy copper PCB, rigid PCB and rigid-flex PCB. It provide pcb board, single layer pcb, multi layer board, rigid flex pcb, aluminum pcb,etc...

Mercredi 09 juin 2021

ZF Electronics, as one of the top printed circuit board maker in China, can provide customers with single-sided PCB, double-sided FR4 PCB, metal core PCB, heavy copper PCB, rigid PCB and rigid-flex PCB. It provide pcb board, single layer pcb, multi layer board, rigid flex pcb, aluminum pcb,etc...

Mercredi 09 juin 2021

ZF Electronics, as one of the top circuit board factory in China, can provide customers with single-sided PCB, double-sided FR4 PCB, metal core PCB, heavy copper PCB, rigid PCB and rigid-flex PCB. It provide pcb board, single layer pcb, multi layer board, rigid flex pcb, aluminum pcb,etc...

Mercredi 09 juin 2021

Quantité : 15000Piece - Prix : $0.18~$0.3/Watt;$45~

Hangzhou Jayuan, electric car charger manufacturers, is a solution and export company committed to providing our clients with the best quality products related to the field of solar energy as well as electric vehicle charging. Our main focus is to give our clients the best solutions...

Jeudi 03 juin 2021

Komkey,a membrane switches supplier , is a pioneer in the graphic overlay manufacturers of custom membrane keypad, graphics, nameplate, label, dispensing glue and touch panel, we have gathered over 10 years of experience in the field which guarantee our customers deliver date, top-highly...

Mercredi 02 juin 2021

Niceone-tech is a professional (HMI)human machine interface control module manufacturer. Niceone-tech has always been people-oriented, and should constantly improve the working environment and living environment of employees, so as to enhance the centripetal force of employees to...

Samedi 29 mai 2021

Exothermic Welding Mold A good "exothermic welding" solder joint should have a full and bright surface and no pore. The section of the joint should be cut and observed as a whole without pore and defect. The most important factor affecting the welding effect of exothermic welding...

Mercredi 19 mai 2021

Fume extractor is a kind of mobile industrial dust purifier equipment, which is mainly used to purify the smoke and exhaust gas that are harmful to the human body and the environment when industrial equipment cuts metal and non-metal materials. XlntChillers fume extractor is mainly...

Lundi 26 avril 2021

This automatic vision screen printer is the latest release of our printer. It features the latest machine vision recognition system, adopting highly precise servo motion control to achieve high speed and high accuracy pattern matching. With a core cycle time below 8.5 seconds, our...

Lundi 26 avril 2021

SMT refers to surface mount technology, which is the most popular technology and production process applied in the circuit board assembly line. In the pick and place system, it is the circuit assembly technology that mounts no-lead or short-lead surface assembly components on the...

Lundi 26 avril 2021

The pick and place machine is the equipment used to achieve high-speed and high-precision placement of components in the production line, it is configured after the dispenser screen printing machine. The surface mount components are accurately mounted by moving the mounting head....

Lundi 26 avril 2021

Reflow soldering technology is widely used in the field of electronic manufacturing. The components on the various boards used in our computers are soldered to the circuit board through this process. This PCB reflow oven machine has a heating circuit inside to heat air or nitrogen...

Mercredi 21 avril 2021

Description : Substrate type: Alumina ceramics Substrate material thickness: 0.5mm Conducting layer: Cu Thickness of metal layer: 35mm/35mm Surface preparation: heavy silver Metal single-sided /double sided: double sided Copper plated through hole: yes Solder mask: yes Features : 1...