Algomtl
svgfair.com
 
Auto Relays
Détails
Chine (Rép. pop) Habillement / Mode
Habillement / Mode

Auto Relays

Auto off relay control higher voltages or currents by using lower voltages or currents. When a certain voltage or current is applied to both ends of the electromagnetic relay coil, the magnetic flux generated by the coil passes through the magnetic circuit composed of the iron core, the yoke, the armature and the working air gap of the magnetic circuit. Under the action of the magnetic field, the armature is attracted to the pole face of the iron core. Therefore, the normally closed contact of the contact is pushed to be disconnected, and the normally open contact is closed. When the voltage or current at both ends of the coil is less than a certain value, and the mechanical reaction force is greater than the electromagnetic attraction force, the armature will return to the initial state, the normally open contact is disconnected and normally closed contact is on.

Key Features of Auto Relays

With charatstic of high switching load power, high shock and vibration resistance.

Power 12V.

Power consumption 1.6～2W.

Ambient temperature -40℃～125℃.

How To Test Auto Relays?

(1) A simple method for judging the working performance of the auto relays.

Turn on the ignition auto relay switch, and then use your ear or stethoscope to listen to the sound of the control relay, or feel the vibration of the relay with your hand. If there is vibration, then the auto relays is working well, the electrical appliance does not work due to other reasons. Otherwise, the relay is not working properly.

You can also unplug the auto recloser relay for testing, for example, if the air conditioner compressor does not work, you can start the engine, turn on the blower switch and the air conditioner switch. Then unplug the connector of the air conditioner compressor relay to judge. If the sound of the relay action can be heard, the engine speed drops significantly when the relay is unplugged, and the engine speed rises when the auto relays is inserted, it means that the air conditioner compressor relay and its control circuit are normal.
(2) Common failures of relays.
Common failure phenomena of relays include coil burnout, inter-turn short circuit or insulation aging, contact ablation, thermal decay, and inability to adjust the initial operating current.
①The relay coil is burnt out. In order to prevent this from happening, if the temperature may exceed 80°C during repair, maintenance and electric welding, the temperature-sensitive relays and electronic control units should be removed.
② Contact ablation. For example, vehicle with 491Q-ME engine, the relay of the air conditioner condenser fan is just below the glass cleaning spray pipe. If the spray pipe is broken, the cleaning fluid will leak to the relay, making the relay normally open contact is corroded and cannot be disconnected, which will lead to the failure of the air conditioner condenser fan to keep running. Therefore, water should be strictly prevented from entering the relay.
(3) Try to reduce the contact resistance of the relay contact.
The contact resistance existing between the contacts of the automotive relay is mainly composed of shrinkage resistance and surface film resistance. The contact resistance of the contact is related to the contact form, material properties and surface processing of the contact. It can be seen that to reduce the contact resistance of the relay contacts, under the condition of a certain contact pressure, it can be started by improving the contact state and improving the contact material.
(4) Poor grounding of the ECU may affect the normal operation of the relay.

Now the price of auto spares sale is reasonable, if you have needs, please contact us.

Localisation : Room 1505, F15, Bldg T2, 2 Yichuang St, Huangpu 510555, Guangzhou, China, 510555 Guangzhou,
Personne à contacter : MAPMS MAPMS, +86 139 2617 0287

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
Auto Relays

Rechercher dans la catégorie : Habillement / Mode
Rechercher dans la catégorie :
relays, auto
Corée (Rep. de) Divers
photo non disponible

Monday 13 April 2009

Quantité : 5000

Dear Sir/ Madam, we are one of a reliable manufacturere and exporter of qualified fry pan based in Korea, which is nano silver non-stick marble coated on both side, and also FDA approved.We have produced 20cm, 24cm, 26cm, 28cm fry pan and 28cm wok pan along with highly quality control...

Kano Co.,Ltd

Turquie Matières premières
photo non disponible

Friday 09 February 2007

Dear Mr. / Mrs. We are a leading adhesive manufacturer in Turkey.We are producing water based , solvent based adhesives in our factory. We are producing adhesives for furniture , wood , parquet ,floor , upholestry , leather , shoe , pvc pipe , marble and granite sectors. We are making...

Adalar Kimya

  • adalar
  • - Istanbul
  • 00902122212151
Algérie 16000 Biens d'équipement
photo non disponible

Thursday 06 October 2011

Prix : euro

société espagnole vends à partir de l espagne des machines pour fabrication des bouteilles plastique en PET pour limonade , jus , eau minerale. machines injection et extrusion souflage des thermplastiques. des broyeurs plastique prix CFR tout port contact par e mail pour plus d informationLocalis...

CDE

  • raouf85
  • 16000 - alger
  • 07 94 55 89 41
 

Paiement sécurisé

Paiement sécurisé

Informations

Les plus recherchés