DUCTILE - 488 Annonces

Mardi 09 août 2022

Quantité : 15~20PCS/Y - Prix : 200-10000000dollars

GKSF pneumatic actuators is specially designed for large torque output. It is a highly unique and reliable means of operating ball, butterfly or plug valves with 90 degree rotating mechanisms.Totally enclosed weatherproof center‐body fabricated in carbon steel or ductile iron provides...

Mardi 09 août 2022

The lost-wax casting process can differ depending on the application and the requirement, but it generally consists the following steps: Molde-making, creating a mold, producing wax patterns, assembling the wax pattern, applying investment materials, burnout, pouring, decesting, finishing...

Mardi 09 août 2022

Investment casting, also called the lost-wax casting process, is actually an ancient metal casting technology with a history of over 6,000 years. Investment casting mold generally refers to the mold made with meltable materials (such as wax, plastic, etc.) in very accurate dimensions...

Mercredi 27 juillet 2022

A screw is a kind of latch that is strung into another part, like a plate. A s30400 bolt requires a nut to frame a gathering. We know all about the expression stray pieces, yet no one at any point utilizes the expression nuts and screws. There are relatively few fastener in an infusion...

Vendredi 15 juillet 2022

Aluminum is a silvery-white, soft, non-magnetic, and ductile metal in the boron group. In recent years, aluminum tubes have been widely used in metallurgy, machinery, petrochemical, electronics, atomic energy, medical, agriculture, aerospace, and defense industries. Wuhan Golden Laser...

Jeudi 30 juin 2022

Quantité : 500000 Pie - Prix : US $1 - 3,000 / Set

ZECO is a professional rubber lined butterfly valve manufacturers in China and butterfly valve is main products series of ZECO valve. The rubber lined concentric butterfly valve is widely used in various kinds of operating conditions because compare to other valves it cost lower and...

Jeudi 30 juin 2022

Quantité : 500000 Pie - Prix : US $1 - 3,000 / Set

Festures of Backflow Preventers The double check valve is designed as a whole, with small structure； Body is streamlined with little resistance loss； Combination of a double check valve and safety drain valve can completely prevent backflow pollution under any working condition； All...

Jeudi 30 juin 2022

Quantité : 500000 Pie - Prix : US $1 - 3,000 / Set

Features of Altitude Control Valve Automatic tank fill and shut-off without the use of floats or sensors; Accurate shut-off to within inches of set point; High level point adjustable with single screw; Exhaust-to-atmosphere operation allows minimum pressure loss. Altitude Control...

Samedi 25 juin 2022

Aluminium Camlock Coupling The Use of Aluminum Hose Fittings Our Camlock couplings are used to connect hoses etc. The cam-lock coupling, in general, has 8 types including 4 types male parts and 4 types female parts. When you insert male part into female part and close the cam-lock levers...

Samedi 18 juin 2022

Pillow block bearing is an independent bearing unit that can provide support, load, and fix functions, and reduce friction resistance. Pillow block bearings are generally a unit composed of gray cast iron, ductile cast iron or cast steel bearing housings, rolling bearings and related...

Mardi 14 juin 2022

A8V0200 piston pump Bearing T7FC070, 30212A, T7FC060, 30212A Elephant Fluid Power provides hydraulic piston pump bearings, original bearings, the price is reasonable, and will be shipped within 5 days. Attribute of A8V0200 Piston Pump Bearing T7FC070, 30212A, T7FC060, 30212A Attribute...

Mercredi 25 mai 2022

Sealion Machine Tool supplies both floor type and horizontal boring & milling machines. For the floor type boring machine, SEALION borring milling machine manufacturers offer you spindle size from 130mm up to 250mm, with or without square ram. It can work with a rotary table,...

Mercredi 20 avril 2022

Quantité : more than - Prix : 3000-6500 euro per M

Description of Cold Rolled Coil Cold rolled coil, as known as CR coil, CRS or CRC. Cold rolled steel coils are a farther product that uses hot rolled steel coils to do further processing. The further processed steel coil put in a cold rolling mill where the material is cooled (at...)

Samedi 16 avril 2022

Deburring is a problem faced by all metal processing enterprises. The size of the burr directly affects the accuracy, quality and life of the product. Most of our products are designed for the polishing of metal parts. The principle is to use abrasive fiber with strong cutting ability...

Jeudi 07 avril 2022

What is BM6 High Pressure Hydraulic Motor? BM6 disc valve hydraulic motor is a face-end flow, pressure-compensated motor, mainly composed of output shaft, front cover, bearing, long linkage shaft, bearing housing, stator and rotor pair, valve disc, small linkage shaft, distribution...

Jeudi 07 avril 2022

What is BM3 Cycloid Hydraulic Motor？ The BM3 hydraulic motor is a shaft-loaded cycloidal hydraulic motor with higher load capacity and can be used for long-term operation under high pressure. The overall structure design of the output shaft and the flow distribution mechanism, the...

Jeudi 07 avril 2022

What is BM2 Hydraulic Spool Valve Motor? BM2 motor is a spool valve type motor. Characteristic Features of BM2 Hydraulic Spool Valve Motor: 1, lt adapt the gerolor design. Combination efficiency is better than BM1 motor. 2, Credible design for shaft seal, which can bear high pressure...

Jeudi 07 avril 2022

What is BM1 Small Hydraulic Motor? The BM1 is a small, spool valve type gerotor motor. The characteristics of BM1 small hydraulic wheel motor are as follows: 1. Compact shaft and insert-type stator and rotor design, small size, high power and light weight. 2. Reliable shaft seal design...

Jeudi 07 avril 2022

ETCN was established in September 2008. After years of accumulation and development, it has formed a comprehensive manufacturer with custom machining services as the mainstay, supplemented by stamping, forging, casting, and welding processes. As a machining manufacturing company,...

Mardi 29 mars 2022

The vacuum pressure casting, as this name indicates, is casting method which the major processes including the melting, pouring, solidifying are performed inside the vacuum chamber. The vacuum is able to minimum the gas content of the product, and prevent further oxidation happening to the metal...

Mardi 29 mars 2022

The stainless steel has much better physical properties then iron and normal steel, but it possesses worse casting properties. Because the stainless steel has higher melting temperature point, by the liquid form it has worse flowability and bigger shrinkage ratio, and more easier...

Mardi 29 mars 2022

The squeeze die casting, also names extrusion casting or liquid die forging, is kind of newly developed metal forming technic which combines the casting process and die forging like method. The basic principle is to fill the liquid metal into the pre-lubricated mold cavity, then gives...

Mardi 29 mars 2022

The name grey iron is because of the gray color of the fracture it forms, which is due to the presence of graphite. Grey iron die casting is the most common and widely used casting material. Grey iron is so popular in engineering applications because of its relatively low cost and...

Dimanche 20 février 2022

Quantité : 20,000 ton - Prix : $850~$2000 / ton

The lost-wax casting process can differ depending on the application and the requirement, but it generally consists the following steps: Molde-making, creating a mold, producing wax patterns, assembling the wax pattern, applying investment materials, burnout, pouring, decesting, finishing...

Dimanche 20 février 2022

Quantité : 20,000 ton - Prix : $850~$2000 / ton

Investment casting, also called the lost-wax casting process, is actually an ancient metal casting technology with a history of over 6,000 years. It generally refers to the mold made by meltable materials (such as wax, plastic, etc.) in very accurate dimensions. The mold is applied...

Jeudi 27 janvier 2022

Jiangyin Yurui Metallurgical Material Co., Ltd. is a professional manufacturer of alloy cored wire and steel metallurgy products. It has enjoyed steady growth and diversification ever since. Certified to the ISO 9001-2015 Quality Management Standard, our main production equipment...

Samedi 25 décembre 2021

ZECO Valve Group is a humble and united team, to be more dilligent and progessive to show the itegrity to our clients, ZECO gate valve is designed with built-in safety reliability in every detail. WRAS approved rubber and epoxy powder make the valve suitable for drinking water. ZECO...

Samedi 25 décembre 2021

ZECO Valve Group is established in 1991, as an experienced china valve manufacturer. We have 5 factories in China, which are located in Shanghai, Yancheng and Wenzhou, which mainly manufacture pressure reducing valve, pressure relief valve, balancing valve, PICV, water valve and industrial...

Samedi 25 décembre 2021

ZECO Valve Group is established in 1991, as an experienced china valve manufacturer. We have 5 factories in China, which are located in Shanghai, Yancheng and Wenzhou, which mainly manufacture pressure reducing valve, pressure relief valve, balancing valve, PICV, water valve and industrial...

Jeudi 16 décembre 2021

Prix : 1000-6000USD

QINGGONG MACHINERY pro blasting supplies a variety of shot blasting machines to meet your different needs. According to the industry, different types of shot blasting machines can be chosen from. To learn more, you may see the “Industry” applications. Click “Buy Shot Blasting Machine”...

Mercredi 15 décembre 2021

As a professional LED screen rental company, LEDFUL focus on the improvement and innovation of rental LED cabinets, always ready for your any change on LED display details. The LED display is a flat panel display equipment, which consists of small LED module panels to display a variety...

Mercredi 01 décembre 2021

Quantité : 1 - Prix : 2 900,00 €

Les pompes à boues de la série Tobee® AH constituent la gamme la plus complète de pompes à boues centrifuges pour une utilisation dans l'exploitation minière, le traitement des minéraux, la préparation du charbon, le dragage, la métallurgie, les centrales électriques, les applications...

Dimanche 28 novembre 2021

Prix : 100USD

Aluminum Wire Supplier Yurui is one of a reliable and professional aluminium wire suppliers, aluminium wire manufacturers that has many years of experience supplying aluminum products, and so far no bad feedbacks. Besides al wire, we can also offer other aluminum products such as aluminum blocks...

Mardi 23 novembre 2021

Quantité : 1 - Prix : 1dollar-15dollar

Our Idler is made from low alloy high strength steel, combined with quenched and tempered heat treatment plus induction hardened to get the required requirement. With this special material the main structure of the part has a good strength while at the same time the working area...

Mardi 09 novembre 2021

Sealion Machine Tool supplies both floor type and horizontal boring machine cnc. For the floor type boring machine, SEALION horizontal boring machine suppliers offer you spindle size from 130mm up to 250mm, with or without square ram. It can work with a rotary table, milling attachment...

Jeudi 28 octobre 2021

Prix : 1000-6000USD

As a china laser tube cutting machine manufacturer in China, Golden Laser dedicated to designing, manufacturing, and digitizing laser systems for processing tubes for over 15 years. We offer you precisely what you need, from laser tube cutting machine solutions to fiber laser flexible...

Samedi 25 septembre 2021

Prix : 0.01-0.9

50mm polyester webbing is a plain and flat webbing, and is suitable for a lot of applications, like DIY projects, fashion garment, backpack replacement straps, hanging hammock, luggage straps, sport outdoor use, indoor use, and great for heavy duty straps or many other multiple projects as well...

Jeudi 02 septembre 2021

Prix : 100USD

What is BM6 High Pressure Hydraulic Motor? BM6 hydraulic motor is a face-end flow, pressure-compensated motor, mainly composed of output shaft, front cover, bearing, long linkage shaft, bearing housing, stator and rotor pair, valve disc, small linkage shaft, distribution plate and...

Jeudi 19 août 2021

In the iron sand casting process, good surface finish can be produced, as well as high dimensional standard steel castings which widely used in the sand casting foundries. Material we can do but not limited to: GB9439-88: Grey cast iron(HT150,HT200,HT250) JIS G5501-1989: Grey cast iron(FC150...)

Samedi 15 mai 2021

Basic information of Resilient Gate Valve for Underground This valve is used as a two-way closed circuit device. Dof960 series of cases Features of Resilient Gate Valve for Underground 1. No need for sluice Wells, which reduces the amount of installation work; 2. Does not affect the traffic...

Samedi 15 mai 2021

Basic Information of Pump Flow Control Valve This valve is installed at the outlet of the water pump, which can limit the water flow of the water pump and stabilize the head of the water pump. It can make the water pump work in the high-efficiency area, and prevent the overload of...

Samedi 15 mai 2021

Basic Information of Proportional Flow Control Valve This valve is used to control the mix of foam and water to achieve the best extinguishing effect and reduce foam consumption. Dof960 series of cases Features of Proportional Flow Control Valve 1. Simpler than other controls; 2....

Samedi 15 mai 2021

Basic information of Pressure Relief(Sustaining) Valve This valve is opened to prevent the pipeline and equipment from being damaged due to overpressure when the pressure in the water supply pipeline exceeds the set pressure of pressure relief. The valve closes automatically when...

Samedi 15 mai 2021

Basic information of Pressure Reducing Valve It adjusts and controls the outlet pressure of the main valve to enable the outlet pressure of the main valve not vary with inlet pressure, enable the outlet flow rate of the main valve not to vary with its outlet flow rate. download...

Samedi 15 mai 2021

Basic information of Motorized Control Valve This valve can automatically adjust the flow rate of pipelines, the water control of air conditioning ventilation equipment, the water control of heating equipment. Dof960 series of cases Features of Motorized Control Valve 1. The actuator...

Vendredi 14 mai 2021

Jiangyin Yurui Metallurgical Material Co., Ltd. is a professional calcium cored wire manufacturers .It has enjoyed steady growth and diversification ever since. Certified to the ISO 9001-2015 Quality Management Standard, our main production equipment include a core wrapping machine...

Vendredi 14 mai 2021

Quantité : 2000sqm/mo - Prix : 500~2000usd/sqm

The LED display is a flat panel display equipment, which consists of small LED module panels to display a variety of information such as text, image, video, video signal and so on. Advantages of Led Display 1.The area of LED display is ductile. Compared to the LCD, LED display screen...

Jeudi 25 mars 2021

Prix : US $1 - 3,000 / Set

Basic information of Manual Flow Balancing Valve This valve can adjust the flow easily and accurately, and effectively solve the problems of uneven heating and cooling and hydraulic imbalance in the pipe network system. download Dof960 series of cases Features of Manual Flow Balancing Valve 1...

Jeudi 25 mars 2021

Prix : US $1 - 3,000 / Set

Basic Information of Hydraulic Non-Slam Check Valve This valve prevents backflow of media and reduces water hammer to achieve the safe and quiet effect. download Dof960 series of cases Features of Hydraulic Non-Slam Check Valve 1. Small fluid resistance, large flow; 2. Automatic control...

Jeudi 25 mars 2021

Prix : US $1 - 3,000 / Set

Basic information of Home Pressure Reducing Valve This valve reduces pressure before the water supply system enters the house. Dof960 series of cases Features of Home Pressure Reducing Valve 1. Adjustable static pressure and dynamic pressure 2. Reduce pressure and stabilize the pressure 3...

Jeudi 25 mars 2021

Prix : US $1 - 3,000 / Set

Basic information of High Pressure Shut-off Valve This valve is closed after the fire pump is started to cut off the domestic water and ensure the firefighting water. When the fire pump is closed, the valve automatically opens to cut off the firefighting water and restore the domestic...

Jeudi 25 mars 2021

Prix : US $1 - 3,000 / Set

The resilient seated gate valve of ZECO is widely used and reliable in the water supply and drainage system of water supply company, sewage company, and various industries in big cities of China. Is abundant, established in 1991, at that time we only professional production of resilient...

Jeudi 25 mars 2021

Prix : US $1 - 3,000 / Set

Basic information of Foot Valve This valve is installed at the bottom of the pump's underwater pipette, restricting the return of the liquid to the water source in the pump pipe. Dof960 series of cases Features of Foot Valve - Full pipe size flow area; 2. Lowest head loss; 3. 360°...

Mercredi 03 mars 2021

Quantité : more than - Prix : 3000-6500 euro per M

Description of Cold Rolled Sheet The cold rolled sheet is manufactured from the hot rolled sheet. The hot rolled sheet is cleaned chemically and processed further in cold reduction mills, where the material is cooled (at room temperature) followed by annealing and/or tempers rolling...

Mercredi 03 mars 2021

Quantité : more than - Prix : 3000-6500 euro per M

Description of Cold Rolled Coil Cold rolled coil, as known as CRS or CRC. Cold rolled steel coils are a farther product that uses hot rolled steel coils to do further processing. The further processed steel coil put in a cold rolling mill where the material is cooled (at room temperature)...

Mercredi 24 février 2021

Aluminum is a silvery-white, soft, non-magnetic, and ductile metal in the boron group. In recent years, aluminum tubes have been widely used in metallurgy, machinery, petrochemical, electronics, atomic energy, medical, agriculture, aerospace, and defense industries. Golden laser has...

Mercredi 16 décembre 2020

Quantité : 1 - Prix : 1 999,00 €

La structure des pompes à lisier à revêtement caoutchouc Tobee® AHR est similaire à la pompe à lisier à revêtement métallique AH. La principale différence entre AH et AHR réside dans le matériau des pièces en contact avec le fluide, qui sont du caoutchouc naturel, du caoutchouc synthétique...

Jeudi 12 novembre 2020

Prix : ＞0.8USD

As a large SS steel tube manufacturer, Huangshang Steel offer various tubing to meet different application requirements like ba tubing, ep tubing, mp tubing, stainless steel instrument tubing, heat exchange tubes, boiler tubes, aerospace tubing, medical tubing, hydraulic tubing, stainless...

Mardi 03 novembre 2020

Quantité : 100 - Prix : 50 USD per piece

JYG has been dedicated to the production, marketing, and R & D of quality precision casting products since its founding. Our product range is diversified, including auto parts, machinery parts, construction hardware, marine hardware, pump& valve components and some others...

Mardi 29 septembre 2020

Quantité : 10.2 - Prix : 10,20 €

1. Pression de service maximale PN16 2. température de fonctionnement convenable: 80 ° C 3. Taille DN 50-200 avec levier, DN250-600 avec réducteur 4. corps de vanne: fonte iorn / fonte ductile / WCB / acier inoxydable 1. Les vannes papillon ne sont pas recommandées pour le service d'étranglement...

Samedi 15 août 2020

Quantité : 200 units/ - Prix : 7200-28800 USD

Closed mechanical CNC turret punching machine by the programming software (or manual) processing program, by the servo feeding mechanism sent the plate material to the required processing position, at the same time by the die selection system select the appropriate die from the turret...

Samedi 08 août 2020

Prix : US $1 - 3,000 / Set

Basic information of Backflow Preventers(Low Pressure) This valve can strictly prevent the occurrence of backflow pollution, is a safe device to ensure the hygiene of drinking water. Features of Backflow Preventers(Low Pressure) 1. More superior streamline design, energy - saving effect； 2...

Samedi 08 août 2020

Prix : US $1 - 3,000 / Set

Basic Information of Anti Water Hammer Valve This valve is used to reduce the pressure fluctuation caused by the sharp change in the flow rate when the pump is closed or stopped due to power failure, thus protecting the water pump system. Basic Information of Anti Water Hammer Valve...

Samedi 14 mars 2020

Quantité : 5000 ton/p - Prix : ＞0.8USD

Are you looking for 38mm stainless steel tube? As a large ss tube manufacturer, Huangshang Steel offer various ss tube to meet different application requirements like ba tubing, ep tubing, mp tubing, stainless steel instrument tubing, heat exchange tubes, boiler tubes, aerospace tubing...

Mercredi 19 février 2020

Brief Introduction: BM6 high pressure hydraulic motor is a face-end flow, pressure-compensated motor, mainly composed of output shaft, front cover, bearing, long linkage shaft, bearing housing, stator and rotor pair, valve disc, small linkage shaft, distribution plate and preloading spring...

Mercredi 19 février 2020

Brief Introduction: The BM3 cycloid hydraulic motor is a shaft-loaded cycloidal hydraulic motor with higher load capacity and can be used for long-term operation under high pressure. The overall structure design of the output shaft and the flow distribution mechanism, the indented...

Mercredi 19 février 2020

Brief Introduction of hydraulic motor spool valve: BM2 motor is a spool valve type motor. Characteristic Features: 1, Spool valve motor adapt the gerolor design. Combination efficiency is better than BM1 motor. 2, Credible design for shaft seal, which can bear high pressure and be...

Mercredi 19 février 2020

We have small hydraulic motors for sale! Brief Introduction: The BM1 is a small, spool valve type small hydraulic wheel motor. Its characteristics are as follows: 1. Compact shaft and insert-type stator and rotor design, small size, high power and light weight. 2. Reliable shaft seal design...

Mardi 31 décembre 2019

Shandong Jingyanggang Metal Equipment Co., Ltd(JYG Precision Casting) was founded in 2007 in Yanggu, Shandong, China. Covering an area of 20000 square meters, the factory boasts advanced investment casting and shell mold sand casting producing lines to cater to the different needs...

Mercredi 13 novembre 2019

Quantité : 5000 ton/p - Prix : ＞0.8USD

As a large stainless steel tube manufacturer, Huangshang Steel offer various tubing to meet different application requirements like ba tubing, ep tubing, mp tubing, stainless steel instrument tubing, heat exchange tubes, boiler tubes, aerospace tubing, medical tubing, hydraulic tubing...

Samedi 26 octobre 2019

Quantité : 1pc - Prix : US $1 - 3,000 / Set

Most of the 2.5 inch butterfly valve used in the walkway begin to be made of ductile cast iron, as copper or stainless steel becomes much more expensive. The number of butterfly valves used in the 2.5 inch small bore pipe will be more because butterfly valves are light in structure...

Lundi 30 septembre 2019

The product has engineering design and satisfies the traffic exposure criteria, addressing operators' main concerns of the frequency of site visits and efficiency of network operations Localisation : Unit 2, No. 374, North Mofateh St, Tehran, Iran, 1587966114 Tehran, Personne à contacter ...

Mardi 17 septembre 2019

Quantité : 1pc - Prix : US $1 - 3,000 / Set

The double plate China wafer check valve is used for the pure pipeline, industry, environmental protection, water treatment, high-rise building water supply, and drainage pipeline to prevent reverse flow of the medium. The disc check valve adopts wafer type, butterfly disc is two...

Mardi 17 septembre 2019

Quantité : 1pc - Prix : US $1 - 3,000 / Set

The concentric butterfly valve is characterized by the stem center, disc center and body center in the same position. Such structures are simple to make. The common wafer rubber lined butterfly valves are of this type. The drawback is that the disc and seat are always in the extrusion...

Jeudi 04 juillet 2019

- Basic information - - Flanged concentric butterfly valve is used in various service and drain lines as truncation and regulating equipment. - - Features - - 1. Bidirectional sealing, no flow direction of the medium; 2. Valve body vulcanized EPDM, reliable sealing; 3. A dial...

Jeudi 04 juillet 2019

Prix : US $1 - 3,000 / Set

Basic information The double orifice air release valve is a pipeline will be matched equipment, apply to the temperature does not exceed 100 water, hot water pipe on the pipe from the air. Features 1. Body is provided with a shock-proof inner tube to protect the float 2. Lower...

Jeudi 20 juin 2019

Fengcheng Hanyang Industry Co.,Ltd is a China Manual Butterfly Valve Factory and Butterfly Valves Manufacturers,we are offer wholesale Manual Butterfly Valves for sale Fengcheng Hanyang Industry Co.,Ltd is a high-tech enterprise which groups production, research and development, sales...

Mardi 21 mai 2019

DIN3352 F4 Non-rising stem resilient seated valve, PN10/16/25 Body/Bonnet: Ductile iron; Disc: EPDM+ductile; Stem: SS420; Nut: Brass; Gasket: ACS rubber; Bolts: SS304/carbon steel; Opetation: Handwheel or Cap ; In & outside FBE coating with average 250um； Localisation : service2@sinopipevalve...

Mardi 24 avril 2018

Quantité : 10000 piec - Prix : 10 USD/pc

Valve 100% Hydro/Air Test - Fully Welded Ball Valve Advantages， 1: 0% leakage 2: the same material as pipe line which prevents uneven stress 3: higher machining precision 4: smaller, lighter, lower-cost 5: longer-time service life (20years+) - Stainless Steel Screwed Valves Material...

Dimanche 25 mars 2018

Quantité : 1500 - Prix : 2,00 €

1) Diameter: DN80 – DN1800, we also can offer DN125; 2) Standard: GB13295, ISO2531, EN545, EN598, ASTM C151; 3) Effective length: 5.5m -6.1m; 4) Inner cement: Ordinary portland cement, sulphate resistant cement, high-alumina cement; epoxy coating. 5) Outside coating: Zinc coating(130g/m2...

Dimanche 25 mars 2018

Quantité : 1500 - Prix : 1,00 €

Fittings for flanged joints Double Flanged Bend 90° (1/4) Double Flanged Duckfoot Bend 90° (1/4) Double Flanged Long radius Bend 90° (1/4) Double Flanged Bend 45° (1/8) Double Flanged Bend 22.5° (1/16) Double Flanged Bend 11.25° (1/32) All Flanged tee All Flanged tee with 45°Angle...

Samedi 10 mars 2018

Iterm name: Cast steel and CNC flange Service: OEM and ODM is welcomed Material: Die casting: Aluminum or alloy A360, A380, A390, ADC12,ADC10,ALSI09 etc. Ductile iron casting part: QT400 , QT450, QT500, QT550, QT600, QT700 Zinc & Zinc alloy. ZA-3,ZA-5,ZA-8 Sand casting...

Samedi 10 mars 2018

Y connector of handrails or tube for transportation industry Iterm name: Service: OEM and ODM is welcomed Material: Die casting: Aluminum or alloy A360, A380, A390, ADC12,ADC10,ALSI09 etc. Ductile iron casting part: QT400 , QT450, QT500, QT550, QT600, QT700 Zinc & Zinc alloy...

Samedi 10 mars 2018

Iterm name: Ball valve body Service: OEM and ODM is welcomed Material: Die casting: Aluminum or alloy A360, A380, A390, ADC12,ADC10,ALSI09 etc. Ductile iron casting part: QT400 , QT450, QT500, QT550, QT600, QT700 Zinc & Zinc alloy. ZA-3,ZA-5,ZA-8 Sand casting: ZL101...

Samedi 10 mars 2018

Online wholesale malleable iron custom services Iterm name: plumbing and pipe fittings Service: OEM and ODM is welcomed Material: Die casting: Aluminum or alloy A360, A380, A390, ADC12,ADC10,ALSI09 etc. Ductile iron casting part: QT400 , QT450, QT500, QT550, QT600, QT700 Zinc ...

Samedi 10 mars 2018

Iterm name: cast alloy and CNC machining Spare Parts Services Service: OEM and ODM is welcomed Material: Die casting: Aluminum or alloy A360, A380, A390, ADC12,ADC10,ALSI09 etc. Ductile iron casting part: QT400 , QT450, QT500, QT550, QT600, QT700 Zinc & Zinc alloy. ZA-3...

Samedi 10 mars 2018

Online wholesale malleable iron custom services Iterm name: Made in China Steel OEM Pump and valve Spare Parts Services Service: OEM and ODM is welcomed Material: Die casting: Aluminum or alloy A360, A380, A390, ADC12,ADC10,ALSI09 etc. Ductile iron casting part: QT400 , QT450...

Samedi 10 mars 2018

Iterm name: Pump body Service: OEM and ODM is welcomed Material: Die casting: Aluminum or alloy A360, A380, A390, ADC12,ADC10,ALSI09 etc. Ductile iron casting part: QT400 , QT450, QT500, QT550, QT600, QT700 Zinc & Zinc alloy. ZA-3,ZA-5,ZA-8 Sand casting: ZL101,ZL104...

Samedi 10 mars 2018

Iterm name: light/lamp cover Service: OEM and ODM is welcomed Material: Die casting: Aluminum or alloy A360, A380, A390, ADC12,ADC10,ALSI09 etc. Ductile iron casting part: QT400 , QT450, QT500, QT550, QT600, QT700 Zinc & Zinc alloy. ZA-3,ZA-5,ZA-8 Sand casting: ZL101...

Samedi 10 mars 2018

Online wholesale malleable iron, OEM services Iterm name: T joint for handrails Service: OEM and ODM is welcomed Material: Die casting: Aluminum or alloy A360, A380, A390, ADC12,ADC10,ALSI09 etc. Ductile iron casting part: QT400 , QT450, QT500, QT550, QT600, QT700 Zinc & Zinc alloy...

Samedi 10 mars 2018

Online wholesale malleable iron beam clamp OEM and customized services Iterm name: Cast parts Service: OEM and ODM is welcomed Material: Die casting: Aluminum or alloy A360, A380, A390, ADC12,ADC10,ALSI09 etc. Ductile iron casting part: QT400 , QT450, QT500, QT550, QT600...

Mardi 30 janvier 2018

Quantité : 300000ton/ - Prix : USD300/ton

Usage: Used for low pressure liquid delivery, such as water, gas, and oil. Process: LSAW (Longitudinal Submerge-arc Welded) UO(UOE)、RB(RBE)、JCO(JCOE) DSAW (Double Submerged arc welded) Quality Standard: LSAW, DSAW: GB/T3091 Welded steel pipe for low pressure liquid delivery GB/T9711...

Samedi 27 janvier 2018

Quantité : 300000ton/ - Prix : USD300/ton

Usage: Used for low pressure liquid delivery, such as water, gas, and oil. Process: ERW (Electric Resistance Welded) HFI (High Frequency Induction) EFW(ELECTRIC FUSION WELDED TUBE) HFW(High-Frequency Welding) Quality Standard: ERW HFI , EFW,: GB/T3091 Welded steel pipe for low pressure...

Mardi 23 janvier 2018

Quantité : 300000ton/ - Prix : USD300/ton

Usage: Used for low pressure liquid delivery, such as water, gas, and oil. Process: SAW(SAWL,SAWH): Spiral Welded SSAW: Spiral Submerged-arc Welded Quality Standard: GB/T3091 Welded steel pipe for low pressure liquid delivery GB/T9711 Petroleum and natural gas industries--Steel...

Vendredi 08 décembre 2017

Tianjin Union Co., Ltd (IMGV) valve.yummy at foxmail dot com Technical Specifications: Design: DIN3202 Face to face: DIN3202-F1 Flange drilling: DIN2531/DIN2532 /DIN2533 Working temperature: 0- 100°C Working pressure: PN10/PN16 Main Parts and Material: Item Part Name Material...

Vendredi 08 décembre 2017

Tianjin Union Co., Ltd (IMGV) valve.yummy at foxmail dot com ANSI Ductile Iron Gate Valve Specification: 1.Bolted Bonnet; Outside Screw & Yoke 2.Rising Stem/Non-Rising Stem;Solid Wedge/metal to metal seat 3.Face to Face: ANSI B16.10 Application : 1.Working Temp: 100 °C 2.Working Pressure...

Samedi 02 décembre 2017

Prix : 10,00 €

Localisation : Kuiwen District, Weifang City, Shandong Province Iulong INDUSTRIAL PARK, Fangzi DISTRICT, Weifang, China, 261031, 261031 weifang, Personne à contacter : WEI KICCY, 86 536 8868757

Samedi 02 décembre 2017

Prix : 10,00 €

Localisation : Kuiwen District, Weifang City, Shandong Province Iulong INDUSTRIAL PARK, Fangzi DISTRICT, Weifang, China, 261031, 261031 weifang, Personne à contacter : WEI KICCY, 86 536 8868757

Samedi 02 décembre 2017

Prix : 10,00 €

Localisation : Kuiwen District, Weifang City, Shandong Province Iulong INDUSTRIAL PARK, Fangzi DISTRICT, Weifang, China, 261031, 261031 weifang, Personne à contacter : WEI KICCY, 86 536 8868757

Vendredi 01 décembre 2017

Quantité : 1000set - Prix : 50000 usd

Product Description: This PVC+ASA & PMMA synthetic resin tile extrusion machine adopts the advanced foreign technology, and designed for corrosion resistance of plant and heavy acid rain area, it's a new generation of permanent roofing materials. This line adopts a processing...

Vendredi 01 décembre 2017

Quantité : 1000set - Prix : 50000 usd

Product Description: This PVC+ASA & PMMA synthetic resin tile extrusion machine adopts the advanced foreign technology, and designed for corrosion resistance of plant and heavy acid rain area, it's a new generation of permanent roofing materials. This line adopts a processing...

Vendredi 01 décembre 2017

Quantité : 1000set - Prix : 50000 usd

Product Description: This PVC+ASA & PMMA synthetic resin tile extrusion machine adopts the advanced foreign technology, and designed for corrosion resistance of plant and heavy acid rain area, it's a new generation of permanent roofing materials. This line adopts a processing...

Vendredi 01 décembre 2017

Quantité : 1000set - Prix : 50000 usd

Product Description: This PVC+ASA & PMMA synthetic resin tile extrusion machine adopts the advanced foreign technology, and designed for corrosion resistance of plant and heavy acid rain area, it's a new generation of permanent roofing materials. This line adopts a processing...

Vendredi 01 décembre 2017

Quantité : 1000set - Prix : 50000 usd

Product Description: This PVC+ASA & PMMA synthetic resin tile extrusion machine adopts the advanced foreign technology, and designed for corrosion resistance of plant and heavy acid rain area, it's a new generation of permanent roofing materials. This line adopts a processing...

Vendredi 01 décembre 2017

Quantité : 1000set - Prix : 50000 usd

Product Description: This PVC+ASA & PMMA synthetic resin tile extrusion machine adopts the advanced foreign technology, and designed for corrosion resistance of plant and heavy acid rain area, it's a new generation of permanent roofing materials. This line adopts a processing...

Vendredi 01 décembre 2017

Quantité : 1000set - Prix : 50000 usd

Product Description: This PVC+ASA & PMMA synthetic resin tile extrusion machine adopts the advanced foreign technology, and designed for corrosion resistance of plant and heavy acid rain area, it's a new generation of permanent roofing materials. This line adopts a processing...

Vendredi 01 décembre 2017

Quantité : 1000set - Prix : 50000 usd

Product Description: This PVC+ASA & PMMA synthetic resin tile extrusion machine adopts the advanced foreign technology, and designed for corrosion resistance of plant and heavy acid rain area, it's a new generation of permanent roofing materials. This line adopts a processing...

Vendredi 01 décembre 2017

Quantité : 1000set - Prix : 50000 usd

Product Description: This PVC+ASA & PMMA synthetic resin tile extrusion machine adopts the advanced foreign technology, and designed for corrosion resistance of plant and heavy acid rain area, it's a new generation of permanent roofing materials. This line adopts a processing...

Vendredi 01 décembre 2017

Quantité : 1000set - Prix : 50000 usd

Product Description: This PVC+ASA & PMMA synthetic resin tile extrusion machine adopts the advanced foreign technology, and designed for corrosion resistance of plant and heavy acid rain area, it's a new generation of permanent roofing materials. This line adopts a processing...

Vendredi 01 décembre 2017

Quantité : 1000set - Prix : 50000 usd

Product Description: This PVC+ASA & PMMA synthetic resin tile extrusion machine adopts the advanced foreign technology, and designed for corrosion resistance of plant and heavy acid rain area, it's a new generation of permanent roofing materials. This line adopts a processing...

Vendredi 01 décembre 2017

Quantité : 1000set - Prix : 50000 usd

Product Description: This PVC+ASA & PMMA synthetic resin tile extrusion machine adopts the advanced foreign technology, and designed for corrosion resistance of plant and heavy acid rain area, it's a new generation of permanent roofing materials. This line adopts a processing...

Vendredi 01 décembre 2017

Quantité : 1000set - Prix : 50000 usd

Product Description: This PVC+ASA & PMMA synthetic resin tile extrusion machine adopts the advanced foreign technology, and designed for corrosion resistance of plant and heavy acid rain area, it's a new generation of permanent roofing materials. This line adopts a processing...

Vendredi 01 décembre 2017

Quantité : 1000set - Prix : 50000 usd

Product Description: This PVC+ASA & PMMA synthetic resin tile extrusion machine adopts the advanced foreign technology, and designed for corrosion resistance of plant and heavy acid rain area, it's a new generation of permanent roofing materials. This line adopts a processing...

Vendredi 01 décembre 2017

Quantité : 1000set - Prix : 50000 usd

. Localisation : Zhangjiagang city,jiangsu province,china, 215600 changyinsha, Personne à contacter : liu anna, 86 512 58999380

Vendredi 24 novembre 2017

- Ductile Cast Iron - 1. Certification: ISO9001 2. Range: DN80-2600mm 3. Class: C25/C30/C40//K8/K9 4. Pressure: PN10/PN16/PN25/PN40 5. Joint type: T type/K type/Self-restrained type 6. Material: ductile iron 7. Thread: coarse, fine 8. Suitable medium: Water, gas , liquid material transfer...

Vendredi 24 novembre 2017

We are specialized in producing all kinds of oilfield pipe, such as seamless line pipe, welded pipe, tubing, casing, FRP pipe, stainless steel pipe, ductile cast iron , pipe fitting, flexible elbow ect.. Our products are widely used in transportation pipeline for oil and natural gas...

Vendredi 24 novembre 2017

Quantité : 10000 piec - Prix : 10 USD/pc

- Valve - 100% Hydro/Air Test - Stainless Steel Screwed Valves Material: CF8, CF8M Types: Ball Valve, Gate Valve, Globe Valve, Check Valve, Strainer, Pressure: 1000WOG, 2000WOG,200PSI,800PSI,150lbs Carbon Steel And Forged Steel Valves Material: A216WCB,A105,SS304,SS316, Alloy Types...

Mercredi 22 novembre 2017

Quantité : 1000set - Prix : 50000 usd

Description du produit: Cette machine d'extrusion de tuiles de résine synthétique de PVC + ASA et de PMMA adopte la technologie étrangère avancée, et conçue pour la résistance à la corrosion de l'usine et de la zone de pluie acide lourde, c'est une nouvelle génération des matériaux...

Mercredi 22 novembre 2017

Quantité : 1000set - Prix : 50000 usd

Description du produit: Cette machine d'extrusion de tuiles de résine synthétique de PVC + ASA et de PMMA adopte la technologie étrangère avancée, et conçue pour la résistance à la corrosion de l'usine et de la zone de pluie acide lourde, c'est une nouvelle génération des matériaux...

Mercredi 22 novembre 2017

Quantité : 1000set - Prix : 50000 usd

Description du produit: Cette machine d'extrusion de tuiles de résine synthétique de PVC + ASA et de PMMA adopte la technologie étrangère avancée, et conçue pour la résistance à la corrosion de l'usine et de la zone de pluie acide lourde, c'est une nouvelle génération des matériaux...

Mercredi 22 novembre 2017

Quantité : 1000set - Prix : 50000 usd

Description du produit: Cette machine d'extrusion de tuiles de résine synthétique de PVC + ASA et de PMMA adopte la technologie étrangère avancée, et conçue pour la résistance à la corrosion de l'usine et de la zone de pluie acide lourde, c'est une nouvelle génération des matériaux...

Mercredi 22 novembre 2017

Quantité : 1000set - Prix : 50000 usd

Description du produit: Cette machine d'extrusion de tuiles de résine synthétique de PVC + ASA et de PMMA adopte la technologie étrangère avancée, et conçue pour la résistance à la corrosion de l'usine et de la zone de pluie acide lourde, c'est une nouvelle génération des matériaux...

Mercredi 22 novembre 2017

Quantité : 1000set - Prix : 50000 usd

Cette machine d'extrusion de tuiles de résine synthétique de PVC + ASA et de PMMA adopte la technologie étrangère avancée, et conçue pour la résistance à la corrosion de l'usine et de la zone de pluie acide lourde, c'est une nouvelle génération des matériaux permanents de toiture...

Mercredi 22 novembre 2017

Quantité : 1000set - Prix : 50000 usd

Cette machine d'extrusion de tuiles de résine synthétique de PVC + ASA et de PMMA adopte la technologie étrangère avancée, et conçue pour la résistance à la corrosion de l'usine et de la zone de pluie acide lourde, c'est une nouvelle génération des matériaux permanents de toiture...

Mercredi 22 novembre 2017

Quantité : 1000set - Prix : 50000 usd

Description du produit: Cette machine d'extrusion de tuiles de résine synthétique de PVC + ASA et de PMMA adopte la technologie étrangère avancée, et conçue pour la résistance à la corrosion de l'usine et de la zone de pluie acide lourde, c'est une nouvelle génération des matériaux...

Mercredi 22 novembre 2017

Quantité : 1000set - Prix : 50000 usd

Description du produit: Cette machine d'extrusion de tuiles de résine synthétique de PVC + ASA et de PMMA adopte la technologie étrangère avancée, et conçue pour la résistance à la corrosion de l'usine et de la zone de pluie acide lourde, c'est une nouvelle génération des matériaux...

Mercredi 22 novembre 2017

Quantité : 1000set - Prix : 50000 usd

Cette machine d'extrusion de tuiles de résine synthétique de PVC + ASA et de PMMA adopte la technologie étrangère avancée, et conçue pour la résistance à la corrosion de l'usine et de la zone de pluie acide lourde, c'est une nouvelle génération des matériaux permanents de toiture...

Mercredi 22 novembre 2017

Quantité : 1000set - Prix : 50000 usd

Cette machine d'extrusion de tuiles de résine synthétique de PVC + ASA et de PMMA adopte la technologie étrangère avancée, et conçue pour la résistance à la corrosion de l'usine et de la zone de pluie acide lourde, c'est une nouvelle génération des matériaux permanents de toiture...

Mercredi 22 novembre 2017

Quantité : 1000set - Prix : 50000 usd

Cette machine d'extrusion de tuiles de résine synthétique de PVC + ASA et de PMMA adopte la technologie étrangère avancée, et conçue pour la résistance à la corrosion de l'usine et de la zone de pluie acide lourde, c'est une nouvelle génération des matériaux permanents de toiture...

Mercredi 22 novembre 2017

Quantité : 1000set - Prix : 50000 usd

Cette machine d'extrusion de tuiles de résine synthétique de PVC + ASA et de PMMA adopte la technologie étrangère avancée, et conçue pour la résistance à la corrosion de l'usine et de la zone de pluie acide lourde, c'est une nouvelle génération des matériaux permanents de toiture...

Mercredi 22 novembre 2017

Quantité : 1000set - Prix : 50000 usd

Product Description: This PVC+ASA & PMMA synthetic resin tile extrusion machine adopts the advanced foreign technology, and designed for corrosion resistance of plant and heavy acid rain area, it's a new generation of permanent roofing materials. This line adopts a processing...

Mardi 14 novembre 2017

Prix : 10,00 €

Localisation : Kuiwen District, Weifang City, Shandong Province Iulong INDUSTRIAL PARK, Fangzi DISTRICT, Weifang, China, 261031, 261031 weifang, Personne à contacter : WEI KICCY, 86 536 8868757

Mardi 14 novembre 2017

Prix : 10,00 €

Localisation : Kuiwen District, Weifang City, Shandong Province Iulong INDUSTRIAL PARK, Fangzi DISTRICT, Weifang, China, 261031, 261031 weifang, Personne à contacter : WEI KICCY, 86 536 8868757

Mardi 14 novembre 2017

Prix : 10,00 €

Localisation : Kuiwen District, Weifang City, Shandong Province Iulong INDUSTRIAL PARK, Fangzi DISTRICT, Weifang, China, 261031, 261031 weifang, Personne à contacter : WEI KICCY, 86 536 8868757

Vendredi 27 octobre 2017

Prix : 10,00 €

Localisation : No.12 Yinghui Road, Mashan Town, Binhu District, Wuxi, Jiangsu, China, 214092 Wuxi, Personne à contacter : Wang Lihong, 86 510 85990876

Mardi 24 octobre 2017

Quantité : 9999999999 - Prix : Negotiable

YM-CK5116Epro Semi-closed CNC Vertical Lathes 1. This machine tool is based on the original CK5116Epro increased semi-closed protection, scraps discharge, scraps discharge car, pump water workpiece cooling, oil temperature refrigeration, Germany Mecano button station etc. features...

Mardi 24 octobre 2017

Quantité : 9999999999 - Prix : Negotiable

YM-CK5112Epro Semi-closed CNC Vertical Lathe 1. This machine tool is based on the original CK5116Epro increased semi-closed protection, scraps discharge, scraps discharge car, pump water workpiece cooling, oil temperature refrigeration, Germany Mecano button station etc. features...

Mardi 24 octobre 2017

Quantité : 9999999999 - Prix : Negotiable

YM-CK5126Epro CNC Single Column vertical lathe 1. The product is in Pro version with professional design, being an improved product with a huge market sales volume. CK5112Epro and CK5116Epro adopt the identical modules (identical beam section, beam slide base, rotary slide base...)

Mardi 24 octobre 2017

Quantité : 9999999999 - Prix : Negotiable

YM-CK5123Epro CNC vertical lathe for sale 1. The product is in Pro version with professional design, being an improved product with a huge market sales volume. CK5112Epro and CK5116Epro adopt the identical modules (identical beam section, beam slide base, rotary slide base, ram, servo...)

Mardi 24 octobre 2017

Quantité : 9999999999 - Prix : Negotiable

YM-CK5116Epro CNC vertical lathes 1. The product is in Pro version with professional design, being an improved product with a huge market sales volume. CK5112Epro and CK5116Epro adopt the identical modules (identical beam section, beam slide base, rotary slide base, ram, servo motor...)

Mardi 24 octobre 2017

Quantité : 9999999999 - Prix : Negotiable

YM-CK5112Epro CNC vertical lathe 1. The product is in Pro version with professional design, being an improved product with a huge market sales volume. CK5112Epro and CK5116Epro adopt the identical modules (identical beam section, beam slide base, rotary slide base, ram, servo motor...)

Mardi 24 octobre 2017

Quantité : 9999999999 - Prix : Negotiable

CJ5250 Double-column Vertical Lathe 1. Such series of lathe are featured with high bearing capacity, reasonable price and excellent performance. 2. Large base, working platform, ring hear and guide plate pf working platform. 3. The working platform adopts the type of purely static...

Mardi 24 octobre 2017

CJ5240 Double-column Vertical Lathes in china 1. Such series of lathe are featured with high bearing capacity, reasonable price and excellent performance. 2. Large base, working platform, ring hear and guide plate pf working platform. 3. The working platform adopts the type of purely...

Mercredi 18 octobre 2017

CQ5240E Double column Vertical Lathe for sale 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding...

Mercredi 18 octobre 2017

Prix : Negotiable

C5235E Double-column Vertical Lathes 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type...

Mercredi 18 octobre 2017

C5231E Double-column Vertical Lathes china 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding...

Mercredi 18 octobre 2017

C5228E Double-column Vertical Lathe 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type...

Mercredi 18 octobre 2017

Quantité : 9999999999

C5225E Double-column Vertical Lathe 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type...

Samedi 23 septembre 2017

Quantité : Hebei shen - Prix : US $0.5 / Piece

Nom du produit: ASTM A105 Classe 300 Bride aveugle en acier forgé Type: Bride aveugle Structure: Brides Surface d'étanchéité: RF Taille: 1/2 "~ 64" (Dn15 mm ~ 1600 mm) Délai de livraison: 30 Jours Ex Mill Normes: ASTM A182, A105, ANSI B16.5, B16.47, B16.48 Certificat: ISO Spécifications...

Samedi 17 juin 2017

We are manufacturer for valves, flanges, pipe fittings. The valves, flanges and pipe fittings are in cast iron, ductile iron, carbon steel, stainless steel, brass. Valves: Butterfly valves, Gate valves, Check valves, Ball valves, Globe valves, Triple duty valves, Air valves, Y strainers...