SINTERED - 488 Annonces

Vendredi 11 septembre 2020

Quantité : 500tons - Prix : USD0.015-----USD100

Category: hard ferrite magnets/ china ceramic magnets Advantages: coercive force is high;strong resistance to demagnetization,suitable for dynamic working magnetic circuit structure;good corrosion resistance,surface treatment not needed Disadvantages: low magnetic energy; not resistant...

Vendredi 11 septembre 2020

Quantité : 500tons - Prix : USD0.015-----USD100

Category: AlNiCo magnets/metal perpament magnets Advantages: high magnetic energy, good temperature stability Disadvantages: very low coercive force,easy to be demagnetized, magnetic circuit design can not use thin disc magnets, and must be assemblied first then overall magnetized...

Jeudi 10 septembre 2020

Prix : 0,50 €

Polycrystalline diamond composite(PDC) Polycrystalline diamond composite(PDC) sheet is made of diamond particles and cemented carbide matrix sintered at 60,000 atmospheres, high temperature and high pressure above 1500 ℃, and has the high hardness of diamond and the high toughness...

Jeudi 10 septembre 2020

Prix : 0,50 €

PCD Cutting Tool Blanks E-Grind supplies the whole range of pcbn cutting tools. The largest Diameter available can be 55mm. Our PCD products provides high wearing resistance ability and high finishing surface. Our plant installs laser cutting machines and surface lapping and finishing...

Mardi 01 septembre 2020

Prix : 1 000,00 €

Overview of PDC Cutter PDC cutters are made of diamond micro-powder and cemented carbide substrate sintered under ultra-high pressure and high temperature. It has high hardness, high wear resistance and thermal conductivity of diamond, and has the strength and impact toughness of...

Jeudi 20 août 2020

Prix : 0.01-100 USD/PCS

Sintered Neodymium Magnets Sintered neodymium magnet is the strongest magnetic material commercially available today. It is largely made of alloy of neodymium, iron and boron, and the chemical formula is Nd2Fe14B. Sintered NdFeB neodymium magnet exhibits high magnetic energy product...

Jeudi 20 août 2020

Prix : 0.01-100 USD/PCS

Magnetic materials can produce magnetic fields, which generate forces attracting or repelling ferromagnetic materials and other magnets. Magnetic materials can be divided into soft and hard magnets. Soft magnets are those materials easy to magnetize and demagnetize, while hard magnets...

Jeudi 02 juillet 2020

Quantité : 1kgs - Prix : USD0.015-----USD100

Category: rare earth magnets/ Samarium-Cobalt magnets/ SmCo magnets Advantages: highest coercive force; highest working temperature; good temperature stability Disadvantages: price is too expensive Contact Now Product Description The same as neodymium magnets, Samarium Cobalt magnets...

Jeudi 02 juillet 2020

Quantité : 1kgs - Prix : USD0.015-----USD100

Category: AlNiCo magnets/metal perpament magnets Advantages: high magnetic energy, good temperature stability Disadvantages: very low coercive force,easy to be demagnetized, magnetic circuit design can not use thin disc magnets, and must be assemblied first then overall magnetized...

Lundi 29 juin 2020

Quantité : 1000tons - Prix : 100USD

As a disc magnet supplier, our Magnets are guaranteed. Please contact us in time if necessary. Disc/Cylinder Neodymium Magnets Material Sintered Neodymium Iron Boron Dimensions Diameter Min.1.2 mm—Max.220 mm Height Min.0.5 mm—Max.50 mm Tolerance Standard +/-0.05mm, Min.+/-0...

Lundi 29 juin 2020

Quantité : 1000tons - Prix : 100USD

- Custom Neodymium Magnets - Material Sintered Neodymium Iron Boron Dimensions Customized Tolerance Standard +/-0.05mm, Min.+/-0.01mm Magnetization Orientation Customized Magnetic Properties Grade Max. Operating Temperatures N35-N52 80°C (176°F) 33M- 48M 100°C (212°F)...

Lundi 29 juin 2020

Quantité : 1000tons - Prix : 100USD

- Specifications for Arc segment magnets - Material Sintered Neodymium Iron Boron Dimensions Outer Diameter Customized Inner Diameter Customized Angel Customized Tolerance Standard +/-0.05mm, Min.+/-0.02mm Magnetization Orientation Diametrical, Through Thickness, Through...

Lundi 29 juin 2020

Quantité : 1000tons - Prix : 100USD

Magnetic materials can produce magnetic fields, which generate forces attracting or repelling ferromagnetic materials and other magnets. Magnetic materials can be divided into soft and hard magnets. Soft magnets are those materials easy to magnetize and demagnetize, while hard magnets...

Mardi 16 juin 2020

Quantité : 10000 Piec - Prix : 150-10000

Great bits design and manufacture a wide variety of Matrix body PDC (polycrystalline diamond cutter) bits. Our PDC bits are offered in a variety of sizes, blade count and cutter sizes. The Matrix body PDC bit is sintered with tungsten carbide powder. Gauge protection with natural diamond...

Mardi 16 juin 2020

Quantité : 10000 Piec - Prix : 150-10000

Overview of PDC Cutter PDC cutters are made of diamond micro-powder and cemented carbide substrate sintered under ultra-high pressure and high temperature. It has high hardness, high wear resistance and thermal conductivity of diamond, and has the strength and impact toughness of...

Samedi 06 juin 2020

Quantité : 500tons - Prix : USD0.015-----USD100

Cube magnets(cubic magnets) are special block magnets, which have the same sizes for length, width, and height. They are also called as magnet cube/cubic blocks. The neodymium cube magnets are the strongest cube magnets, they are made from bigger neodymium magnet blocks by cutting...

Jeudi 07 mai 2020

Quantité : 400 sets/y - Prix : $30000~300000/set

Overview of SK53 Twin Screw Extruder SK53 extruder mini can be used in engineering plastics, color masterbatch, functional masterbatch, blending modification and other industries. In order to adapt to the high temperature and high wear resistance of Engineering plastics, HIP hot isostatic...

Mardi 31 mars 2020

Quantité : 10000 Piec - Prix : 150-10000 USD

Great bits design and manufacture a wide variety of Matrix body PDC (polycrystalline diamond cutter) bits. Our PDC bits are offered in a variety of sizes, blade count and cutter sizes. The Matrix body PDC bit is sintered with tungsten carbide powder. Gauge protection with natural diamond...

Vendredi 20 mars 2020

Sintered neodymium magnet is the strongest magnetic material commercially available today. It is largely made of alloy of neodymium, iron and boron, and the chemical formula is Nd2Fe14B. Sintered NdFeB neodymium magnet exhibits high magnetic energy product in small size with high coercive forces...

Vendredi 20 mars 2020

We have magnetic materials for sale! Magnetic materials can produce magnetic fields, which generate forces attracting or repelling ferromagnetic materials and other magnets. Magnetic materials can be divided into soft and hard magnets. Soft magnets are those materials easy to magnetize...

Jeudi 19 décembre 2019

Arc Magnet/Segment Neodymium Arc Magnets Material Sintered Neodymium Iron Boron Dimensions Outer Diameter Customized Inner Diameter Customized Angel Customized Tolerance Standard +/-0.05mm, Min.+/-0.02mm Magnetization Orientation Diametrical, Through Thickness, Through...

Jeudi 19 décembre 2019

We have magnetic materials for sale! Magnetic materials can produce magnetic fields, which generate forces attracting or repelling ferromagnetic materials and other magnets. Magnetic materials can be divided into soft and hard magnets. Soft magnets are those materials easy to magnetize...

Jeudi 19 décembre 2019

Specifications of threaded rod magnets Material Sintered Neodymium Iron Boron, Steel Dimensions Diameter Min.10 mm—Max.136 mm Pull Force 5 lbs — 900 lbs Magnetization Orientation Axial Magnetic Properties Grade Max. Operating Temperatures N35-N52 80°C (176°F) Remanence(Br) 11...

Jeudi 19 décembre 2019

Industrial magnetic hooks Material Sintered Neodymium Iron Boron, Steel Dimensions Diameter Min.16 mm—Max.136 mm Pull Force 12 lbs — 900 lbs Magnetization Orientation Axial Magnetic Properties Grade Max. Operating Temperatures N35-N52 80°C (176°F) Remanence(Br) 11...

Jeudi 19 décembre 2019

C channel magnets specifications Material Sintered Neodymium Iron Boron, Steel Dimensions Length Min.38 mm—Max.136 mm Pull Force 28 lbs — 900 lbs Magnetization Orientation Through Thickness Magnetic Properties Grade Max. Operating Temperatures N35-N52 80°C (176°F) Remanence(Br)...

Samedi 16 novembre 2019

Quantité : 8000kgs - Prix : USD0.025 - USD1.05

TSP diamond is made of diamond micro powder and a small amount of binder sintered under high temperature and high pressure. It has high wear resistance, strong impact toughness, good thermally stability, and dense structure, and is widely used in the manufacture of petroleum, geological...

Samedi 16 novembre 2019

Quantité : 8000kgs - Prix : USD0.025 - USD1.05

PCD blank for Cutting Tools E-Grind supplies the whole range of PCD blanks for cutting tool purpose. The largest Diameter available can be 55mm. Our PCD provides high wearing resistance ability and high finishing surface. Our plant installs laser cutting machines and surface lapping...

Samedi 12 octobre 2019

Quantité : 8000kgs - Prix : USD0.025 - USD1.05

TSP diamond is made of diamond micro powder and a small amount of binder sintered under high temperature and high pressure. It has high wear resistance, strong impact toughness, good thermally stability, and dense structure, and is widely used in the manufacture of petroleum, geological...

Samedi 12 octobre 2019

Quantité : 8000kgs - Prix : USD0.025 - USD1.05

PCD blank for Cutting Tools E-Grind supplies the whole range of PCD blanks for cutting tool purpose. The largest Diameter available can be 55mm. Our PCD provides high wearing resistance ability and high finishing surface. Our plant installs laser cutting machines and surface lapping...

Mercredi 09 octobre 2019

Solid phase extraction (SPE) is used to reduce sample matrix interference and improve detection sensitivity. The separation selectivity of the solid phase depends on the retention strength of the components that can be retained, so the selection of the solid phase will depend on the...

Vendredi 27 septembre 2019

Quantité : 1 - Prix : 2000USD

Cement Rotary Kiln Pengfei rotary kiln (Rotary kiln, titanium dioxide kiln, sintering furnace, industrial kiln, kiln, oxidizing pellet) has specifications of 3.2*52m, 3.5*54m, 4.0*60m, 4.3*64m, 4.8*74m, 5.0*78m. Pengfei rotary kiln is the main equipment for calcining cement clinker...

Vendredi 20 septembre 2019

Quantité : 1PC - Prix : 0.01-100 USD/PCS

Sintered neodymium magnet is the strongest magnetic material commercially available today. It is largely made of alloy of neodymium, iron and boron, and the chemical formula is Nd2Fe14B. Sintered NdFeB neodymium magnet exhibits high magnetic energy product in small size with high coercive forces...

Vendredi 20 septembre 2019

Quantité : 1PC - Prix : 0.01-100 USD/PCS

Material Sintered Neodymium Iron Boron Dimensions Outer Diameter Min.3.0 mm—Max.200 mm Inner Diameter Min.1.5 mm—Max.150 mm Height Min.0.5 mm—Max.50 mm Tolerance Standard +/-0.05mm, Min.+/-0.01mm Magnetization Orientation Axial, Diametrical, Radial Magnetic Properties Grade Max...

Vendredi 20 septembre 2019

Quantité : 1PC - Prix : 0.01-100 USD/PCS

Material Sintered Neodymium Iron Boron Dimensions Customized Tolerance Standard +/-0.05mm, Min.+/-0.01mm Magnetization Orientation Customized Magnetic Properties Grade Max. Operating Temperatures N35-N52 80°C (176°F) 33M- 48M 100°C (212°F) 33H-48H 120°C (248°F) ...

Vendredi 20 septembre 2019

Quantité : 1PC - Prix : 0.01-100 USD/PCS

Sepecifications of threaded rod magnets Material Sintered Neodymium Iron Boron, Steel Dimensions Diameter Min.10 mm—Max.136 mm Pull Force 5 lbs — 900 lbs Magnetization Orientation Axial Magnetic Properties Grade Max. Operating Temperatures N35-N52 80°C (176°F) Remanence(Br) 11...

Vendredi 20 septembre 2019

Quantité : 1PC - Prix : 0.01-100 USD/PCS

Sepecifications of threaded rod magnets Material Sintered Neodymium Iron Boron, Steel Dimensions Diameter Min.10 mm—Max.136 mm Pull Force 5 lbs — 900 lbs Magnetization Orientation Axial Magnetic Properties Grade Max. Operating Temperatures N35-N52 80°C (176°F) Remanence(Br) 11...

Vendredi 20 septembre 2019

Quantité : 1PC - Prix : 0.01-100 USD/PCS

Sepecifications of neodymium bar magnets Material Sintered Neodymium Iron Boron Dimensions Length Min.2.0 mm—Max.250 mm Width Min.1.5 mm—Max.150 mm Thickness Min.0.5 mm—Max.50 mm Tolerance Standard +/-0.05mm, Min.+/-0.02mm Magnetization Orientation Through Length, Width...

Vendredi 20 septembre 2019

Quantité : 1PC - Prix : 0.01-100 USD/PCS

Sepecifications of neodymium arc magnets Material Sintered Neodymium Iron Boron Dimensions Outer Diameter Customized Inner Diameter Customized Angel Customized Tolerance Standard +/-0.05mm, Min.+/-0.02mm Magnetization Orientation Diametrical, Through Thickness, Through...

Vendredi 20 septembre 2019

Quantité : 1PC - Prix : 0.01-100 USD/PCS

Magnetic materials can produce magnetic fields, which generate forces attracting or repelling ferromagnetic materials and other magnets. Magnetic materials can be divided into soft and hard magnets. Soft magnets are those materials easy to magnetize and demagnetize, while hard magnets...

Vendredi 20 septembre 2019

Quantité : 1pc - Prix : 0.01-100 USD/PCS

Material Sintered Neodymium Iron Boron, Rubber, Steel Dimensions Round / Rectangular Customized Pull Force 8 lbs — 50 lbs Magnetization Orientation Axial / Through Thickness Magnetic Properties Grade Max. Operating Temperatures N35-N52 80°C (176°F) Remanence(Br) 11...

Vendredi 20 septembre 2019

Quantité : 1pc - Prix : 0.01-100 USD/PCS

terial Sintered Neodymium Iron Boron, Steel Dimensions Diameter Min.16 mm—Max.136 mm Pull Force 12 lbs — 900 lbs Magnetization Orientation Axial Magnetic Properties Grade Max. Operating Temperatures N35-N52 80°C (176°F) Remanence(Br) 11,300 Gauss - 14,800 Gauss Coercive...

Mercredi 11 septembre 2019

When storing the column, the column should be filled with acetonitrile or methanol, and the column joint should be tightened to prevent the solvent from evaporating and drying. It is absolutely forbidden to leave the buffer solution in the HPLC columns for an overnight or longer period of time...

Mercredi 28 août 2019

Quantité : 6kg - Prix : 0.025$

PCD material for Cutting Tools E-Grind supplies the whole range of PCD blanks for cutting tool purpose. The largest Diameter available can be 55mm. Our PCD provides high wearing resistance ability and high finishing surface. Our plant installs laser cutting machines and surface lapping...

Mercredi 31 juillet 2019

TSP is made of diamond micro powder and a small amount of binder sintered under high temperature and high pressure. It has high wear resistance, strong impact toughness, good thermal stability, and dense structure, and is widely used in the manufacture of petroleum, geological drill bits...

Mardi 23 juillet 2019

Steelmaking is the process for producing steel from iron ore and scrap. In steelmaking, impurities such as nitrogen, silicon, phosphorus, sulfur and excess carbon are removed from the raw iron, and alloying elements such as manganese, nickel, chromium, and vanadium are added to...

Mercredi 03 juillet 2019

Magnesia bricks description Magnesia bricks are a kind of alkalescency refractory bricks that made from the sintered magnesium with its content of 87%-97% and that are combined with silicate. Since its combination composition is mainly CMS-M2S system, its Load softening temperature...

Mardi 02 juillet 2019

Stainless Steel Filtration System Product Introduction Hawach stainles s steel filtration system is widely used in research units, inspection and quarantine institutions, quality monitoring institutions, natural mineral water industry, drinking water industry, the pharmaceutical industry...

Lundi 17 juin 2019

Product Details Oreworld trade produces a range of calcium aluminate slag with low melting points for synthetic slag applications primarily in ladle metallurgy operations. Calcium Aluminate Synthetic Slag is made of select raw material of Calcium and Aluminate, blended at a proper proportion...

Vendredi 31 mai 2019

Flash Columns Series Flash Columns produced by Hawachhas three series as follows. StarFlash Only silica gel columns are optional with another two types of standard and high-grade level which has higher purity degree and better quality than the former. PureFlash Corresponding to silica...

Dimanche 12 mai 2019

Material Sintered Neodymium Iron Boron Dimensions Diameter Min.1.2 mm—Max.220 mm Height Min.0.5 mm—Max.50 mm Tolerance Standard +/-0.05mm, Min.+/-0.01mm Magnetization Orientation Axial, Diametrical, Axial in Segments Magnetic Properties Grade Max. Operating Temperatures...

Dimanche 12 mai 2019

Material Sintered Neodymium Iron Boron Dimensions Outer Diameter Min.3.0 mm—Max.200 mm Inner Diameter Min.1.5 mm—Max.150 mm Height Min.0.5 mm—Max.50 mm Tolerance Standard +/-0.05mm, Min.+/-0.01mm Magnetization Orientation Axial, Diametrical, Radial Magnetic Properties Grade Max...

Vendredi 29 mars 2019

Cartridge mechanical seal is the rotary ring, stationary ring, spring, auxiliary seal, bushings, glands, Gasket and static seal, total 7 components together into a collection. Therefore, the installation of the machine is more convenient, faster, reliable, welcomed by users all over the world...

Jeudi 02 août 2018

Quantité : 100,000pcs

Sliding contact surface: steel/PTFE sintered bronze Outer race is pressed around inner race. Outer race: carbon steel with liner of PTFE sintered bronze Ball: GCr15 steel,through-hardened HRC58~64, precision ground,hard chrome plated. e: fgb006[at]fgbearing[do]com S: 8617663532960...

Vendredi 13 juillet 2018

Quantité : 1 set - Prix : USD $20000-435000

Multilayers high amplitude vibrating screen, high efficient stone circular vibrating screen Applications of Multilayers high amplitude vibrating screen, high efficient stone circular vibrating screen: 1. Multilayers high amplitude vibrating screen, high efficient stone circular vibrating...

Dimanche 10 juin 2018

size : 50*300mmm material : gr1 filter precision: 5um ,10um shape : tube application: filter water and gas the other product : titanium sitered plate ,titanium sintered ring ,nickel foam filter grade : t1-t9 package : wooden cases delivery time ：15 days Localisation : No.1 ...

Samedi 19 mai 2018

Sintered Wire Mesh Filter Tube Technical Data Raw Material: SS 316L, SS 304 Filter Rating: 0.5-300 Microns Filter Efficiency: > 99 % Operation Temperature: ≤ 816 ℃ Outside Diameter: 10-380 mm Length: 254 mm, 508 mm, 762 mm, 1016 mm or others Sintered Wire Mesh Filter Tube Feature 1...

Samedi 19 mai 2018

Sintered Porous Filter Tube Technical Data Raw Material: SS 316L, SS 304 Filter Rating: 0.5-300 Microns Filter Efficiency: > 99 % Operation Temperature: ≤ 816 ℃ Outside Diameter: 10-380 mm Length: 254 mm, 508 mm, 762 mm, 1016 mm or others Sintered Porous Filter Tube Feature 1....

Samedi 19 mai 2018

Sintered Metal Filter Tube Technical Data Raw Material: SS 316L, SS 304 Filter Rating: 0.5-300 Microns Filter Efficiency: > 99 % Operation Temperature: ≤ 816 ℃ Outside Diameter: 10-380 mm Length: 254 mm, 508 mm, 762 mm, 1016 mm or others Sintered Metal Filter Tube Feature 1. Backwash...

Samedi 19 mai 2018

Sintered Mesh Filter Tube Technical Data Raw Material: SS 316L, SS 304 Filter Rating: 0.5-300 Microns Filter Efficiency: > 99 % Operation Temperature: ≤ 816 ℃ Outside Diameter: 10-380 mm Length: 254 mm, 508 mm, 762 mm, 1016 mm or others Sintered Mesh Filter Tube Feature 1. Backwash...

Samedi 19 mai 2018

Multilayer Sintered Filter Tube Technical Data Raw Material: SS 316L, SS 304 Filter Rating: 0.5-300 Microns Filter Efficiency: > 99 % Operation Temperature: ≤ 816 ℃ Outside Diameter: 10-380 mm Length: 254 mm, 508 mm, 762 mm, 1016 mm or others Multilayer Sintered Filter Tube Feature 1...

Samedi 19 mai 2018

Sintered Fiber Felt Technical Parameter 1. Raw Material: SS 316L 2. Filter Rating: 1-300 Microns 3. Operation Temperature: ≤ 816 ℃ 4. Length: ≤ 1200 mm 5. Width: ≤ 1000 mm 6. Regular Size: 500 mm*500 mm,500 mm*1000 mm,1000 mm*1000 mm or others 7. Thickness: 0.2-10 mm Sintered Fiber...

Vendredi 18 mai 2018

Sintered Powder Filter Sheet Technical Parameter 1. Raw Material: SS 316L,Titanium 2. Filter Rating: 0.22-100 Microns 3. Operation Temperature: ≤ 816 ℃ 4. Length: ≤ 800 mm 5. Width: ≤ 320 mm 6. Thickness: 1 mm,1.5 mm,2 mm,3 mm,5 mm or others Sintered Powder Filter Sheet Feature 1...

Vendredi 18 mai 2018

Sintered Powder Filter Plate Technical Parameter 1. Raw Material: SS 316L,Titanium 2. Filter Rating: 0.22-100 Microns 3. Operation Temperature: ≤ 816 ℃ 4. Length: ≤ 800 mm 5. Width: ≤ 320 mm 6. Thickness: 1 mm,1.5 mm,2 mm,3 mm,5 mm or others Sintered Powder Filter Plate Feature 1...

Vendredi 18 mai 2018

Sintered Metallic Fiber Felt Technical Parameter 1. Raw Material: SS 316L 2. Filter Rating: 1-300 Microns 3. Operation Temperature: ≤ 816 ℃ 4. Length: ≤ 1200 mm 5. Width: ≤ 1000 mm 6. Regular Size: 500 mm*500 mm,500 mm*1000 mm,1000 mm*1000 mm or others 7. Thickness: 0.2-10 mm Sintered...

Vendredi 18 mai 2018

Sintered Metal Fiber Felt Technical Parameter 1. Raw Material: SS 316L 2. Filter Rating: 1-300 Microns 3. Operation Temperature: ≤ 816 ℃ 4. Length: ≤ 1200 mm 5. Width: ≤ 1000 mm 6. Regular Size: 500 mm*500 mm,500 mm*1000 mm,1000 mm*1000 mm or others 7. Thickness: 0.2-10 mm Sintered...

Vendredi 18 mai 2018

Sintered Fiber Filament Media Technical Parameter 1. Raw Material: SS 316L 2. Filter Rating: 1-300 Microns 3. Operation Temperature: ≤ 816 ℃ 4. Length: ≤ 1200 mm 5. Width: ≤ 1000 mm 6. Regular Size: 500 mm*500 mm,500 mm*1000 mm,1000 mm*1000 mm or others 7. Thickness: 0.2-10 mm Sintered...

Vendredi 18 mai 2018

Sintered Fiber Felt Sheet Technical Parameter 1. Raw Material: SS 316L 2. Filter Rating: 1-300 Microns 3. Operation Temperature: ≤ 816 ℃ 4. Length: ≤ 1200 mm 5. Width: ≤ 1000 mm 6. Regular Size: 500 mm*500 mm,500 mm*1000 mm,1000 mm*1000 mm or others 7. Thickness: 0.2-10 mm Sintered...

Vendredi 18 mai 2018

Metal Fiber Mat Technical Parameter 1. Raw Material: SS 316L 2. Filter Rating: 1-300 Microns 3. Operation Temperature: ≤ 816 ℃ 4. Length: ≤ 1200 mm 5. Width: ≤ 1000 mm 6. Regular Size: 500 mm*500 mm,500 mm*1000 mm,1000 mm*1000 mm or others 7. Thickness: 0.2-10 mm Metal Fiber Mat Feature 1...

Vendredi 18 mai 2018

Sintered Wire Mesh Technical Parameter 1. Raw Material: SS 316L, SS 304 2. Filter Rating: 0.5-300 Microns 3. Number of Layers: 2-20 Layers 4. Operation Temperature: ≤ 816 ℃ 5. Length: ≤ 1200 mm 6. Width: ≤ 1000 mm 7. Regular Size: 500 mm*500 mm,500 mm*1000 mm,1000 mm*1000 mm or others 8...

Vendredi 18 mai 2018

Sintered Porous Filter Sheet Technical Parameter 1. Raw Material: SS 316L, SS 304 2. Filter Rating: 0.5-300 Microns 3. Number of Layers: 2-20 Layers 4. Operation Temperature: ≤ 816 ℃ 5. Length: ≤ 1200 mm 6. Width: ≤ 1000 mm 7. Regular Size: 500 mm*500 mm,500 mm*1000 mm,1000 mm*1000...

Vendredi 18 mai 2018

Sintered Porous Filter Plate Technical Parameter 1. Raw Material: SS 316L, SS 304 2. Filter Rating: 0.5-300 Microns 3. Number of Layers: 2-20 Layers 4. Operation Temperature: ≤ 816 ℃ 5. Length: ≤ 1200 mm 6. Width: ≤ 1000 mm 7. Regular Size: 500 mm*500 mm,500 mm*1000 mm,1000 mm*1000...

Vendredi 18 mai 2018

Sintered Metal Wire Mesh Technical Parameter 1. Raw Material: SS 316L, SS 304 2. Filter Rating: 0.5-300 Microns 3. Number of Layers: 2-20 Layers 4. Operation Temperature: ≤ 816 ℃ 5. Length: ≤ 1200 mm 6. Width: ≤ 1000 mm 7. Regular Size: 500 mm*500 mm,500 mm*1000 mm,1000 mm*1000 mm or others 8...

Vendredi 18 mai 2018

Sintered Metal Mesh Technical Parameter 1. Raw Material: SS 316L, SS 304 2. Filter Rating: 0.5-300 Microns 3. Number of Layers: 2-20 Layers 4. Operation Temperature: ≤ 816 ℃ 5. Length: ≤ 1200 mm 6. Width: ≤ 1000 mm 7. Regular Size: 500 mm*500 mm,500 mm*1000 mm,1000 mm*1000 mm or others 8...

Vendredi 18 mai 2018

Sintered Metal Filter Sheet Technical Parameter 1. Raw Material: SS 316L, SS 304 2. Filter Rating: 0.5-300 Microns 3. Number of Layers: 2-20 Layers 4. Operation Temperature: ≤ 816 ℃ 5. Length: ≤ 1200 mm 6. Width: ≤ 1000 mm 7. Regular Size: 500 mm*500 mm,500 mm*1000 mm,1000 mm*1000 mm or others 8...

Vendredi 18 mai 2018

Sintered Metal Filter Plate Technical Parameter 1. Raw Material: SS 316L, SS 304 2. Filter Rating: 0.5-300 Microns 3. Number of Layers: 2-20 Layers 4. Operation Temperature: ≤ 816 ℃ 5. Length: ≤ 1200 mm 6. Width: ≤ 1000 mm 7. Regular Size: 500 mm*500 mm,500 mm*1000 mm,1000 mm*1000 mm or others 8...

Vendredi 18 mai 2018

Sintered Mesh Technical Parameter 1. Raw Material: SS 316L, SS 304 2. Filter Rating: 0.5-300 Microns 3. Number of Layers: 2-20 Layers 4. Operation Temperature: ≤ 816 ℃ 5. Length: ≤ 1200 mm 6. Width: ≤ 1000 mm 7. Regular Size: 500 mm*500 mm,500 mm*1000 mm,1000 mm*1000 mm or others 8...

Vendredi 18 mai 2018

Perforated Sheet Sintered Wire Mesh Technical Parameter 1. Raw Material: SS 316L, SS 304 2. Filter Rating: 0.5-300 Microns 3. Number of Layers: 2-20 Layers 4. Operation Temperature: ≤ 816 ℃ 5. Length: ≤ 1200 mm 6. Width: ≤ 1000 mm 7. Regular Size: 500 mm*500 mm,500 mm*1000 mm,1000...

Vendredi 18 mai 2018

Perforated Plate Sintered Wire Mesh Technical Parameter 1. Raw Material: SS 316L, SS 304 2. Filter Rating: 0.5-300 Microns 3. Number of Layers: 2-20 Layers 4. Operation Temperature: ≤ 816 ℃ 5. Length: ≤ 1200 mm 6. Width: ≤ 1000 mm 7. Regular Size: 500 mm*500 mm,500 mm*1000 mm,1000...

Vendredi 18 mai 2018

Multilayer Sintered Wire Mesh Technical Parameter 1. Raw Material: SS 316L, SS 304 2. Filter Rating: 0.5-300 Microns 3. Number of Layers: 2-20 Layers 4. Operation Temperature: ≤ 816 ℃ 5. Length: ≤ 1200 mm 6. Width: ≤ 1000 mm 7. Regular Size: 500 mm*500 mm,500 mm*1000 mm,1000 mm*1000...

Vendredi 18 mai 2018

Five Layer Sintered Wire Mesh Technical Parameter 1. Raw Material: SS 316L, SS 304 2. Filter Rating: 0.5-300 Microns 3. Number of Layers: 2-20 Layers 4. Operation Temperature: ≤ 816 ℃ 5. Length: ≤ 1200 mm 6. Width: ≤ 1000 mm 7. Regular Size: 500 mm*500 mm,500 mm*1000 mm,1000 mm*1000...

Vendredi 18 mai 2018

Sintered Powder Filter Disc Technical Parameter 1. Raw Material: SS 316L,Titanium 2. Filter Rating: 0.22-100 Microns 3. Operation Temperature: ≤ 816 ℃ 4. Diameter: ≤ 400 mm 5. Thickness: 1 mm,1.5 mm,2 mm,3 mm,5 mm or others Sintered Powder Filter Disc Feature 1. Depth filtration 2...

Vendredi 18 mai 2018

Stainless Steel Sintered Filter Disc Technical Parameter 1. Raw Material: SS 316L,SS 304 2. Filter Rating: 0.5-300 Microns 3. Operation Temperature: ≤ 816 ℃ 4. Diameter: ≤ 1000 mm 5. Thickness: 0.5 mm,1 mm,1.5 mm,2 mm,3 mm,5 mm or others Stainless Steel Sintered Filter Disc Feature 1...

Vendredi 18 mai 2018

SS Sintered Filter Disc Technical Parameter 1. Raw Material: SS 316L,SS 304 2. Filter Rating: 0.5-300 Microns 3. Operation Temperature: ≤ 816 ℃ 4. Diameter: ≤ 1000 mm 5. Thickness: 0.5 mm,1 mm,1.5 mm,2 mm,3 mm,5 mm or others SS Sintered Filter Disc Feature 1. Backwash and Reusable 2...

Vendredi 18 mai 2018

Sintered Wire Mesh Filter Disc Technical Parameter 1. Raw Material: SS 316L,SS 304 2. Filter Rating: 0.5-300 Microns 3. Operation Temperature: ≤ 816 ℃ 4. Diameter: ≤ 1000 mm 5. Thickness: 0.5 mm,1 mm,1.5 mm,2 mm,3 mm,5 mm or others Sintered Wire Mesh Filter Disc Feature 1. Backwash...

Vendredi 18 mai 2018

Sintered Porous Filter Disc Technical Parameter 1. Raw Material: SS 316L,SS 304 2. Filter Rating: 0.5-300 Microns 3. Operation Temperature: ≤ 816 ℃ 4. Diameter: ≤ 1000 mm 5. Thickness: 0.5 mm,1 mm,1.5 mm,2 mm,3 mm,5 mm or others Sintered Porous Filter Disc Feature 1. Backwash and Reusable 2...

Vendredi 18 mai 2018

Sintered Metal Filter Disk Technical Parameter 1. Raw Material: SS 316L,SS 304 2. Filter Rating: 0.5-300 Microns 3. Operation Temperature: ≤ 816 ℃ 4. Diameter: ≤ 1000 mm 5. Thickness: 0.5 mm,1 mm,1.5 mm,2 mm,3 mm,5 mm or others Sintered Metal Filter Disk Feature 1. Backwash and Reusable 2...

Vendredi 18 mai 2018

Sintered Metal Filter Disc Technical Parameter 1. Raw Material: SS 316L,SS 304 2. Filter Rating: 0.5-300 Microns 3. Operation Temperature: ≤ 816 ℃ 4. Diameter: ≤ 1000 mm 5. Thickness: 0.5 mm,1 mm,1.5 mm,2 mm,3 mm,5 mm or others Sintered Metal Filter Disc Feature 1. Backwash and Reusable 2...

Vendredi 18 mai 2018

Sintered Mesh Filter Disc Technical Parameter 1. Raw Material: SS 316L,SS 304 2. Filter Rating: 0.5-300 Microns 3. Operation Temperature: ≤ 816 ℃ 4. Diameter: ≤ 1000 mm 5. Thickness: 0.5 mm,1 mm,1.5 mm,2 mm,3 mm,5 mm or others Sintered Mesh Filter Disc Feature 1. Backwash and Reusable 2...

Vendredi 18 mai 2018

Sintered Circular Filter Disc Technical Parameter 1. Raw Material: SS 316L,SS 304 2. Filter Rating: 0.5-300 Microns 3. Operation Temperature: ≤ 816 ℃ 4. Diameter: ≤ 1000 mm 5. Thickness: 0.5 mm,1 mm,1.5 mm,2 mm,3 mm,5 mm or others Sintered Circular Filter Disc Feature 1. Backwash and Reusable 2...

Vendredi 18 mai 2018

Multilayer Sintered Filter Disc Technical Parameter 1. Raw Material: SS 316L,SS 304 2. Filter Rating: 0.5-300 Microns 3. Operation Temperature: ≤ 816 ℃ 4. Diameter: ≤ 1000 mm 5. Thickness: 0.5 mm,1 mm,1.5 mm,2 mm,3 mm,5 mm or others Multilayer Sintered Filter Disc Feature 1. Backwash...

Mercredi 16 mai 2018

Prix : USD 10 / Piece

Sintered Metal Filter Element Technical Parameter Raw Material: SS 316L, SS 304 Filter Rating: 0.5-300 Microns Filter Efficiency: > 99 % Operation Temperature: ≤ 816 ℃ Outside Diameter: 10-380 mm Length: 254 mm, 508 mm, 762 mm, 1016 mm or others Gasket: PTFE, Viton, Silicone, Buna-n...

Jeudi 26 avril 2018

Size : 13"*11" Shape : round Surface: poprous Application : inject oxygen to sea water Feature : corrision resistance Filter hole diameter : 5um Package: wooden cases Price : 650usd/piece Localisation : No.1 ,Southside Of High-Tech 12th Road, BaojiCity ,Shaanxi, China (Mainland)...

Jeudi 22 mars 2018

sintered bronze cone shank drill bit Model: ZR-001 Size: Dia4mm-Dia100mm 1 Bronze diamond glass drill bits are suit for all kinds of 4-19mm thickness glass; 2 Pls note: we suggest that working speed 3000-3500rpm for dia4mm-dia42mm,2000-2500rpm for dia45mm-dia70mm and 1000-1500rpm...

Samedi 10 mars 2018

Quantité : custom mad - Prix : custom made

Nous sommes Top5 fournisseur d'aimants en Chine. Nous avons certifié par OIN/TS16949, ISO9001, ISO14001, OHSAS18001. nos produits incluent: aimants NdFeB frittés, aimants NdFeB radiaux, aimants de SMCO, aimants NdFeB collés, aimants d'Alnico, aimants de ferrite, aimants en caoutchouc flexibles...

Vendredi 09 février 2018

material ：titanium size : customized thickness : 3mm function : filt water and gas shape : popore package : wooden cases payment : TT and Payment Price : 65usd Localisation : No.1 ,Southside Of High-Tech 12th Road, BaojiCity ,Shaanxi, China (Mainland), 721013 BAOJI , Personne à contacter ...

Mercredi 27 décembre 2017

Why choose our wc-12%co for thermal spray powder - We have more than 10 years experience in manufacturing wc-12%co for thermal spray powder products - Ex-factory is at least 30% cheaper than you own native - The quality conforms to the international ISO standards ,the service life...

Samedi 02 décembre 2017

Prix : 10,00 €

Localisation : HouXiang Town, Danyang City, Jiangsu, China, 212322 Zhenjiang, Personne à contacter : Wei Tracy, 86 511 86312330

Mardi 21 novembre 2017

Quantité : 3000/month - Prix : 0,10 €

- - - - - Electroplated Diamond Cutting Blades & Discs - Electroplated Diamond Cutting Discs Have Very Sharp Cutting Performance And Generate Minimum Heat. Name: Electroplated Diamond Cutting Disc Application: Cutting Marble, Granite, Thermosettin Send Inquiry Service Telephone...

Samedi 18 novembre 2017

Quantité : 1000 - Prix : 5,00 €

Double Row Diamond Cup Grinding Wheel double row diamond cup grinding wheel removes stock quickly and efficiently to greatly reduce the machine, tools and labor cost. double row diamond cup grinding wheel lasts much longer than competitive tools and will not glaze. Available connectors are M14...

Samedi 18 novembre 2017

Quantité : 1000 - Prix : 5,00 €

Diamond Grinding Wheel for Concrete diamond grinding wheel for concrete removes stock quickly and efficiently to greatly reduce the machine, tools and labor cost. diamond grinding wheel for concrete lasts much longer than competitive tools and will not glaze. Available connectors are M14...

Samedi 18 novembre 2017

Quantité : 1000 - Prix : 5,00 €

Diamond cup wheel grinding disc Diamond cup wheel grinding disc removes stock quickly and efficiently to greatly reduce the machine, tools and labor cost. Diamond cup wheel grinding disc lasts much longer than competitive tools and will not glaze. Available connectors are M14, 5/8”-11...

Samedi 18 novembre 2017

Quantité : 1000 - Prix : 5,00 €

Diamond cup grinding wheel Diamond cup grinding wheel are designed for surface preparation, concrete and terrazzo floor correction and grinding. It combines superior diamonds, an extremely durable, unique and versatile matrix to create a high performance concrete floor grinding results...

Samedi 18 novembre 2017

Quantité : 1000 - Prix : 5,00 €

7 inch diamond cup grinding wheel 7 inch diamond cup grinding wheels divided into sintered type and welded type. There are coarse(30/40 grit), medium(70/80grit), fine(100/120grit) for grinding and polishing granite, concrete, masonry materials, and all type natural stone with maximum...

Samedi 18 novembre 2017

Quantité : 1000 - Prix : 5,00 €

4 inch diamond cup grinding wheel 4 inch diamond cup grinding wheel is ideal for beveling smoothing and shaping with excellent performance. There are sintered and silver welded for 4 inch diamond cup grinding wheel. Available connectors are M14, 5/8”-11 or arbor 22.23mm. 4 inch diamond...

Samedi 11 novembre 2017

Quantité : 1000 - Prix : 2,00 €

Diamond Grinding Wheel for Tungsten Carbide Feature: Grit: 100#, 150#, 180#, 240# Shape: Plane Sintered technology High grinding sharpness, long life, no scratch, no burns Application: Resin bond diamond grinding wheel is used for grinding thermal spraying industry, such as tungsten carbide...

Samedi 11 novembre 2017

Quantité : 1000 - Prix : 20,00 €

Diamond Grinding Wheel for Glass Diamond grinding wheel for glass include full segmented, external or internal half segmented, full rim cup grinding wheels, OG shape grinding wheels and various other customized shapes and sizes. With their predictably long life and effective grinding properties...

Samedi 21 octobre 2017

Quantité : 500tons - Prix : USD0.015-----USD100

Product Description Neodymium-iron-boron magnets short as NdFeB magnets, NIB magnets, neo magnets or neodymium magnets. Following called as NdFeB magnets or neodymium magnets.As a kind of rare earth magnets, neodymium magnets were developed from the year of 1983 , it is the most powerful...

Samedi 23 septembre 2017

He Hui products cover super-hard material and super-hard material products, including single crystal diamond, polycrystalline diamond, micro powder, CBN; brazed products, electroplated products, sintered products, laser welded ones; diamond/CBN grinding wheel, fiber oil stone, polishing pad etc...

Jeudi 31 août 2017

Quantité : MOQ:1 kilo - Prix : $48/kilogram

Place of Origin: Sichuan, China (Mainland) Brand Name: Santon Model Number: ST-09083 Type: Power Tool Parts, construction tool parts surface finish: As sintered/sandblasting Hardness: 85.7-90.5 HRA material: 100% virgin tungsten carbide delivery terms: DDP available, more convenient...

Mardi 22 août 2017

Quantité : 1000000squ - Prix : USD4.0-40/square met

High precision dutch woven copper wire mesh by xinxiang bashan 1. Grade: 300 Series 2. Standard: AISI, ASTM, GB, JIS 3. Certification: ISO9001,TS16949,ISO 14001. 4.Brand name: bashan 5.Place of Origin: Henan China (Mainland) Product Name High precision dutch woven copper wire mesh...

Mardi 22 août 2017

Quantité : 1000000squ - Prix : USD4.0-40/square met

High quality plain weave stainless steel screening wire mesh 1. Grade: 300 Series 2. Standard: AISI, ASTM, GB, JIS 3. Certification: ISO9001,TS16949,ISO 14001. 4.Brand name: bashan 5.Place of Origin: Henan China (Mainland) Product Name High quality plain weave stainless steel screening...

Mardi 22 août 2017

Quantité : 1000000squ - Prix : USD4.0-40/square met

High Quality Screening stainless steel Wire Mesh by xinxiang bashan 1. Grade: 300 Series 2. Standard: AISI, ASTM, GB, JIS 3. Certification: ISO9001,TS16949,ISO 14001. 4.Brand name: bashan 5.Place of Origin: Henan China (Mainland) Product Name High Quality Screening stainless steel...

Jeudi 03 août 2017

Quantité : 1000pcs - Prix : 1-5usd

DESCRIPTION 1.Specification Material Copper Pipe Diameter: 3mm ~ 16mm Min. Thickness 1 mm Min. Bend Radius Ø6 -> R9 (1.5 times) Allowable inclination Angle 5° max (At Top Heat Mode) Allowable Operating Temperature -50°C ~ 200°C Storage Humidity 5~90% RH Storage Temperature 5~60°C Max...

Mercredi 02 août 2017

Quantité : 50000 squa - Prix : USD3/aquare meter

Product Description Superior Quality Multilayer Sintered Metal Wire Mesh Mesh material AISI 304/316/304L/316L, Thickness 3mm,4mm,5mm,6mm,etc Filtration precision 1-500μm Standard size 500X1000X1.7mm Porosity(%) 28/29/30/31/32/35/39 Certifications GB/T6003, ISO 3310, BS410...

Mercredi 02 août 2017

Quantité : 50000 squa - Prix : USD3/aquare meter

Product Description Superior Quality Multilayer Sintered Metal Wire Mesh Mesh material AISI 304/316/304L/316L, Thickness 3mm,4mm,5mm,6mm,etc Filtration precision 1-500μm Standard size 500X1000X1.7mm Porosity(%) 28/29/30/31/32/35/39 Certifications GB/T6003, ISO 3310, BS410...

Vendredi 14 juillet 2017

Quantité : 80000tons/ - Prix : USD4.9-15/kg

Detail for Brass Wire - Material: good-quality brass - Weight/spool: 3, 5, 7, 15 and 20kg - Tensile strength: 1,000, 900, 500 and 400N per square millimeter - Alloy number: C28000/C27400/C27000/C26000 - Diameter: 0.1 to 80mm Features - Good cold processing plasticity, elasticity...

Jeudi 30 mars 2017

Quantité : 200 pieces - Prix : 5 dollars

Performance Good permeability, high filtration precision, good purification effect Able to withstand heat pressure and impact, high strength, good plasticity, oxidation resistance, corrosion resistance Good assembly, welding, bonding and machining Strong regeneration ability...

Mardi 21 mars 2017

y Candle filters especially for POY /FDY/ BCF/ staple fiber/ nonwoven spinning Key advantages : • Assembly by welding • Folding multi-layers • Woven wire mesh or sintered fiber web with any mesh • Different dimension available • Any type of joint Localisation : Room 407, No...

Samedi 26 novembre 2016

Introduction Ceramic fiber ribbon is produced by high quality refractory ceramic fiber and woven from yarn. It can be used for high temperature applications up to1050°C. The cloth is reinforced with fiberglass filament, and optional SUS304 wire (Inconel/alloy steel wire). Or even...

Samedi 26 novembre 2016

Introduction Bio soluble AES fiber is a high-temperature insulating wool composed of man-made vitreous silicate fibers. Bio soluble AES fiber is exonerated from the carcinogen classification in the European Union under the term of NOTA Q of European Directive 67/548/EEC. Bio soluble...

Jeudi 08 septembre 2016

Quantité : 2000MTS - Prix : USD699-999/MT

Sintered Tabular Alumina AL2O3≥99.2% SiO2≤0.05% CaO≤0.04% Fe2O3≤0.05% Na2O≤0.40% Apparent density≥3.50g/cm3 Apparent Porosity≤5.0 Application: 1,Steel industry 2,Foundry industry 3,Petrochemical industry 4,ceramic industry 5,incineration industry 6,Electrical insulators 7...

Samedi 27 août 2016

Prix : 10,00 €

Guitar puickup Alnico MagnetAlnico Magnet is made primarily from aluminum, nickel, cobalt, copper,iron and sometimes titanium.is hard and brittle. Machining or drilling cannot therefore be accomplished by ordinary methods. HolesAmong all available magnetic material, alnico magnet...

Samedi 27 août 2016

Prix : 10,00 €

SmCo magnet is composed of Samarium, Cobalt, and a few transition metals. SmCo magnet is high performance, low temperature coefficient rare earth permanent magnets, and could keep their performance under the maximum working temperature up to 350 degree centigrade.Manufacturing Process...

Jeudi 21 juillet 2016

Quantité : 10 Kilogra - Prix : US $60 - 100 / Kilog

1/ GENERAL INTRODUCTION: Industrial Range Industrial Range Tungsten Carbide Tipped saw blades are precision manufactured to the highest standards for accuracy and durability. Incorporating heavy gauge, hardened, tempered, ground, smithed and blocked saw bodies, with industrial...

Mercredi 06 juillet 2016

Quantité : 10 Kilogra - Prix : US $60 - 100 / Kilog

Cemente Carbide Cold Ribbed Rollerd 1/ GENERAL INTRODUCTION: UKO tungsten carbide cold rolls Tungsten carbide cold rolls is the main products of UKO, our cold rolls is used in reinforcement wire cold rolling and forming, we had more than 15 years experience to processing cold rolls...

Mercredi 15 juin 2016

China International Block and Brick Industry Exhibition (BBE2016) Date: September 26-28, 2016 Venue: China Import and Export Fair Pazhou Complex BBE Introduction BBE, sponsored by Asian Construction Technology Alliance and China Aggregates Net (www.caggregate.com), supported by...

Dimanche 05 juin 2016

Date: September 26-28, 2016 Venue: China Import and Export Fair Pazhou Complex BBE Introduction BBE, sponsored by Asian Construction Technology Alliance and China Aggregates Net (www.caggregate.com), supported by municipal wall reformation institutes and overseas associations,...

Dimanche 15 mai 2016

Date: September 26-28, 2016 Venue: China Import and Export Fair Pazhou Complex BBE Introduction BBE, sponsored by Asian Construction Technology Alliance and China Aggregates Net (www.caggregate.co m), supported by municipal wall reformation institutes and overseas associations...

Lundi 18 avril 2016

Date: September 26-28, 2016 Venue: China Import and Export Fair Pazhou Complex BBE Introduction BBE, sponsored by Asian Construction Technology Alliance and China Aggregates Net (www.caggregate.co m), supported by municipal wall reformation institutes and overseas associations...

Jeudi 24 mars 2016

Quantité : 1-10000

WEBSITE: www.haolxfiltration.com TEL: 86-318-7061221 E-MAIL: candy@filter-cn.com Category: Service station filter Material: stainless steel 304、316L 316Ti ; resin-impregnated cellulose paper Properties: station pump filter element Application: Particulate filtration; for gasoline...

Jeudi 14 janvier 2016

Specifications Materials: Neodymium-Iron-Boron; 2. TechnoloSuper Strong Neodymium Magnet Super Strong Neodymium Magnet Super Strong Neodymium Magnet Super Strong Neodymium gy: Utilizations of new Sintered NdFeB magnet techniques and equipment such as strip casting,HDDR technology; 3...

Jeudi 14 janvier 2016

Neodymium Magnetic Filter/Neodymium Magnet Bar/Magnetic Filter Bar Grade N35-52(N,M,H,SH,UH,EH) Various sizes Customized Shape Bar, Strip, Stick, Block, Sheet, Round, Disc, etc. Materials Sintered Neodymium-Iron-Boron Coating Ni,Zn,Au,Epoxy,etc. Technology Application...

Mardi 12 janvier 2016

Kontec Precision Industrial Co., Ltd. as one Taiwanese Green Company and with the raising global environment awareness, KONTEC's concept is to fulfill corporate social responsibility. Also, with more than 25 years of professional manufacturing Drill EDM, Kontec steadily provides...

Lundi 30 novembre 2015

Date: March 9-11, 2016 Venue: China Import and Export Fair Pazhou Complex BBE Introduction BBE, sponsored by Asian Construction Technology Alliance and China Aggregates Net (www.caggregate.co m), supported by municipal wall reformation institutes and overseas associations, has...

Jeudi 26 novembre 2015

Quantité : 100 Set/Se - Prix : US $2,000 - 200,000

Sand making machine Pebbles is a production of construction sand, stone dedicated equipment, which can be used for sand production lines, industrial sand and other aspects of application performance plus jaw crusher and vibrating screen composed of sand production line is very location...

Vendredi 13 novembre 2015

Quantité : 1+ - Prix : mail

Sand making machine Pebbles is a production of construction sand, stone dedicated equipment, which can be used for sand production lines, industrial sand and other aspects of application performance plus jaw crusher and vibrating screen composed of sand production line is very location...

Mardi 13 octobre 2015

Prix : $6000-80000 set

Artificial sand is widely used in road construction, concrete industry, etc. As the application fields gradually expand, the gradual application of natural sand becomes wider and fails to keep pace with the various sectors of modern world development needs. Sand maker(VSI Sand maker...)

Vendredi 09 octobre 2015

An aggressive sintered compound is mounted to a vented, steel backing plate. These pads are perfect for wet conditions or downhill riding. Material: Sintered Metal Quantity: 1 Pairs, 2 PCS Pads - All weather condition. Excellent heat dissipation, Ultimate long life, - Much...

Vendredi 09 octobre 2015

An aggressive sintered compound is mounted to a vented, steel backing plate. These pads are perfect for wet conditions or downhill riding. Material: Sintered Metal Quantity: 1 Pairs, 2 PCS Pads - All weather condition. Excellent heat dissipation, Ultimate long life, - Much...

Vendredi 09 octobre 2015

An aggressive sintered compound is mounted to a vented, steel backing plate. These pads are perfect for wet conditions or downhill riding. Material: Sintered Metal Quantity: 1 Pairs, 2 PCS Pads - All weather condition. Excellent heat dissipation, Ultimate long life, - Much...

Mardi 15 septembre 2015

Quantité : 1+ - Prix : mail

Sand making machine Pebbles is a production of construction sand, stone dedicated equipment, which can be used for sand production lines, industrial sand and other aspects of application performance plus jaw crusher and vibrating screen composed of sand production line is very location...

Dimanche 13 septembre 2015

Quantité : 1+ - Prix : mail

Sand making machine Pebbles is a production of construction sand, stone dedicated equipment, which can be used for sand production lines, industrial sand and other aspects of application performance plus jaw crusher and vibrating screen composed of sand production line is very location...

Lundi 07 septembre 2015

LH-SJ301: GB/5293-1999 F4A2-H08A AWS F7A0-EL8 1.Description: LH-SJ301 is a neutral silicon and calcium sintered flux with ball form granular of brown, grain size of 10-60 mesh in size. It can be used on AC or DC with large electric current. Its unique features include stable arc...

Lundi 07 septembre 2015

SJ101: GB/T F4A4-H08C F5A4-H10Mn2 AWS F7A4-EH14 1.Description: LH-SJ101G is a special-purpose sintered flux developed especially for welding steel that are used in the project of Transporting the Natural Gas from the West to the East. With the alkalinity of approx 1.8,it is shaped as grey...

Lundi 07 septembre 2015

Quantité : 1000000Ton - Prix : USD430/Ton

Welding Flux SJ301 for SAW EL8,EL12,EM14 LH-SJ301: GB/5293-1999 F4A2-H08A AWS F7A0-EL8 1.Description: LH-SJ301 is a neutral silicon and calcium sintered flux with ball form granular of brown, grain size of 10-60 mesh in size. It can be used on AC or DC with large electric current...

Lundi 07 septembre 2015

Quantité : 3000000000 - Prix : USD430/Ton

SJ101: GB/T F4A4-H08C F5A4-H10Mn2 AWS F7A4-EH14 1.Description: LH-SJ101G is a special-purpose sintered flux developed especially for welding steel that are used in the project of Transporting the Natural Gas from the West to the East. With the alkalinity of approx 1.8,it is shaped as grey...

Lundi 07 septembre 2015

LH-SJ301: GB/5293-1999 F4A2-H08A AWS F7A0-EL8 1.Description: LH-SJ301 is a neutral silicon and calcium sintered flux with ball form granular of brown, grain size of 10-60 mesh in size. It can be used on AC or DC with large electric current. Its unique features include stable arc...

Mercredi 22 juillet 2015

Specifications of 1L ~ 200L Rubber (Plastic) Dispersion Mixer (Kneader) Model Item X(S)N- 1×12~58 X(S)N- 3×32 (6-60) X(S)N- 10×32 X(S)N- 20×32 X(S)N- 35×30 X(S)N- 55×30 X(S)N- 75×30 X(S)N- 110×30 X(S)N- 150×30 X(S)N- 200×30 Total volume of mixing chamber ...

Vendredi 12 juin 2015

Quantité : 2500 Nos. - Prix : On Request

Offering a variety of precision, cost-effective Sintered Self Lubricating Bushes & High Strength Powder Metal Structural Parts such as Sintered Iron & Bronze Bushes likes Plain, Flanged, Spherical, Half Spherical, Washers etc,, Sintered Gears & Rotors for Oil Pump Assy...

Vendredi 12 juin 2015

Quantité : 2500 Min - Prix : On Request

leading Indian manufacturer & Exporter of Sintered Self Lubricating Bushes & Powder Metal Structural Parts such as Sintered Iron & Bronze Bushes likes Plain, Flanged, Spherical, Half Spherical, Washers etc,, Sintered Gears & Rotors for Oil Pump Assy. Sintered low...