INDUCTION - 1058 Annonces

Vendredi 16 août 2019

NH2 HPLC columns refer to the chromatographic columns that use silica gel as matrix carrier to bond amino groups. They are usually used for the analysis of carbohydrate compounds, and the mobile phase is usually methanol, acetonitrile and buffers salt solution. - The cleaning method...

Lundi 01 juillet 2019

- RTV-1 Silicone Rubber - RTV-1 silicone is a condensed non conductive silicone rubber that is gradually cured from outside to inside by contacting with moisture in the air. rtv grease-1 silicone rubber are used in bonding, sealing, encapsulating photovoltaic module components including...

Samedi 01 juin 2019

Liaoning Yufei high-frequency welding equipment co,.ltd has been developing and manufacturing machines for the medical industry for over 60 years. We have created multiple solutions for the production of urine bags, blood bags, waste bags etc. It's adjustable to the different size...

Lundi 20 mai 2019

For explosion-protected areas Dial Switch Temperature Transmitter is an integrated ultra-stable temperature transmitter with explosion-protected shell, built-in imported PT100 high-anciency temperature sensor,; used in instruments and apparatus system, laboratory, engineering machine...

Mercredi 01 mai 2019

Features: * The boosting pipe is compatible with standard 1.80ML local anesthetic and two models of syringe needles (British system and metric system). It is mainly used for local anesthesia injection of oral cavity. * There is no pipeline or other consumables, which may save the...

Jeudi 20 décembre 2018

Features: 1.Devices are small, light weight, low powerconsumption; 2.The temperature around the furnace is low, less smoke, good working environment; 3.Operating process is simple, reliable operationsmelting; l 4.Heating temperature is uniform, less burning.metal composition is uniform...

Jeudi 20 décembre 2018

Features: 1.Devices are small, light weight, low powerconsumption; 2.The temperature around the furnace is low, less smoke, good working environment; 3.Operating process is simple, reliable operationsmelting; l 4.Heating temperature is uniform, less burning.metal composition is uniform...

Mardi 11 décembre 2018

MUSSAN 00905547477463 (whatsapp-viber) WHATSAPP/VİBER MG 10.2 fonctionnement de la machine de bloc beton est controlée par un opérateur manuellement par des poignés a systeme hydraulique -utilisation possible 24 h / 24 h et possibilite de faire 2 couches – on peut obtenir des surfaces lisses...

Mardi 11 décembre 2018

00905547477463 (whatsapp-viber) Machine origine Turquie Machines de blocs béton entièrement automatique L'unité de production de produits en béton, ou machine à blocs, est un ensemble d'éléments permettant de fabriquer une grande quantité des blocs, pavés ou bordures en béton. fonctionnement...

Vendredi 07 décembre 2018

Features: 1.Devices are small, light weight, low powerconsumption; 2.The temperature around the furnace is low, less smoke, good working environment; 3.Operating process is simple, reliable operationsmelting; l 4.Heating temperature is uniform, less burning.metal composition is uniform...

Jeudi 01 novembre 2018

Features: 1.Devices are small, light weight, low powerconsumption; 2.The temperature around the furnace is low, less smoke, good working environment; 3.Operating process is simple, reliable operationsmelting; l 4.Heating temperature is uniform, less burning.metal composition is uniform...

Jeudi 01 novembre 2018

Features: 1.Devices are small, light weight, low powerconsumption; 2.The temperature around the furnace is low, less smoke, good working environment; 3.Operating process is simple, reliable operationsmelting; l 4.Heating temperature is uniform, less burning.metal composition is uniform...

Dimanche 16 septembre 2018

Quantité : 9999999 - Prix : Negotiable

Application Scope Steel / Copper / Aluminium Bar, used for the preheat of the metal bar before processing Technical Standard Heating Temperature : From Indoor Temp ~ Craft Annealing Temp. Heating Speed 1 ~100 m/min The device consist of Complete series of induction power...

Dimanche 16 septembre 2018

Quantité : 9999999 - Prix : Negotiable

Application Scope Steel Material：30MnSi、35Si etc Specification φ8 ~ 14mm Speed φ7.1mm ≤110m/min φ9.0mm ≤100m/min φ10.7mm ≤75m/min φ12.6mm ≤50m/min Heating Temperature Max Quenching Temp：950℃ Max Temperting Temp：450℃ Power Consumption per Ton φ9.0mm Power consumption...

Dimanche 16 septembre 2018

Quantité : 9999999 - Prix : Negotiable

Application Scope Online Annealing and Tempering Heat Treatment of Copper , Aluminium and S.S non-ferrous Metal pipe or Wire Technical Features Heating Temperature : From indoor temperature ~ Craft Annealing Temperature Speed 20 ~ 60 m/min The Device Consist of IGBT Solid...

Dimanche 16 septembre 2018

Quantité : 9999999 - Prix : Negotiable

Model CCLT350 Chain travelling distance ≤10000mm Working table level travelling distance ±≤40mm Working table vertical travelling distance 0 ~100mm Quenching travelling speed 10 ~60mm/s continuously adjustable Main usage Used for Motorcycle、general mechanical linkage...

Dimanche 16 septembre 2018

Quantité : 9999999 - Prix : Negotiable

Model CCSZ1000-2000 Quenching Dia φ100 ~2000 mm Working table horizontal travelling length ≤1200mm Travelling length for transformer ≤800mm continuously adjustable Travelling speed for work-piece 2 ~50mm/s continuously adjustable Main Usage Used in single-teeth quenching...

Dimanche 16 septembre 2018

Quantité : 9999999 - Prix : Negotiable

Localisation : Baoding, 071000 Baoding, Personne à contacter : Elsa Yan, 0086 312 2138875

Dimanche 16 septembre 2018

Quantité : 9999999 - Prix : Negotiable

Application scope Mainly used for straight seam welding of carbon steel tube and high-strength steel(including round pipe、square pipe、rectangular pipe and special tube) and alloy steel. Technical features Fast welding speed, high production capacity and good energy-saving compared...

Dimanche 16 septembre 2018

Quantité : 9999999 - Prix : Negotiable

Oil pump shaft induction hardening machine is full-digital solid state all-in-one induction heating power supply. It has lots of merits as below: 1.digital phase-locked loop is formed with DSP as the core, with wider phase-locked range, more stable Angle and small loss 2.with DSP as the core...

Samedi 04 août 2018

MODÈLE Hyperion- 4000LM Paramètres Module PV 90W Durée de vie 25 ans (L'atténuation de puissance de chaque année est d'environ 1%) LED lumineuse 4000LM Puce à LED 3535 LED Regarde Ange 70 ° * 140 ° Température de couleur 3000K-6500K, typique (5500K-6000K) Indice de rendu des couleurs...

Dimanche 22 juillet 2018

Quantité : Min. Order - Prix : FOB Price: US $30-10

GPHQ Y2 AC MOTOR : Y2 Series Cast of Iron Three Phase Induction Motor is specially designed for European market, whose terminal box is located on the top of motor.They are totally enclosed and fan-cooling designed. They are newly designed in conformity with the relevant requirements...

Samedi 21 juillet 2018

- Operating Room Stainless Steel Products - - Double a operating room pool - Apply to class 10 to class 1000000 clean rooms, air shower, transfer window, clean bench, FFU, clean sampling car, etc. Mainly use industries: LCD liquid crystal manufacture, bio-medicine, precision instrument...

Mercredi 27 juin 2018

Quantité : 1 - Prix : $3000-10000

Italie Pizza Four Brûleur à Gaz Chauffage Lava Rock Commercial Pizza Four Société Pfofile Shanghai Chuanglv Hôtel Equipment Co., Ltd a été créé en 1992. Nous sommes spécialisés dans la conception et la fabrication de grills teppanyaki et divers équipements de restauration commerciale...

Mercredi 27 juin 2018

Quantité : 1 - Prix : 600,00 €

Équipement de gril de BBQ de barbecue de BBQ de BBQ Profil de la société Établi en 1992, nous sommes spécialisés dans la conception et la fabrication de grills de teppanyaki et de divers équipements commerciaux de restauration. Nous avons les marques GREENARK et OVEN GRANDMASTER...

Vendredi 22 juin 2018

Quantité : 1 - Prix : US$1000-3500

Équipement de cuisson de gril de table de Teppanyaki de couleur d'arc-en-ciel de pont Profil de la société Shanghai Chuanglv Catering Equipment Co., Ltd est le premier et le premier fabricant d'équipement de teppanyaki en Chine avec l'histoire de 26 ans. Depuis 1992, nous avons été...

Vendredi 22 juin 2018

Quantité : 1 - Prix : US$1000-3000

Énergie électrique Teppanyaki Grill Table Cooking equipment Profil de la société Shanghai Chuanglv Catering Equipment Co., Ltd est le premier et le premier fabricant d'équipement de teppanyaki en Chine avec l'histoire de 26 ans. Depuis 1992, nous avons été le leader de l'industrie...

Mercredi 20 juin 2018

Quantité : 1piece - Prix : USD750

1.Description of digital pressure gauge manometer YK series of precision digital pressure gauge is based on decades of our digital form on technological innovation for metering industry tailored a high precision and high stability of the digital pressure gauge. 2.Application of digital...

Mercredi 13 juin 2018

Quantité : 1 - Prix : USD300~300

- 1.Description of the split electromagnetic acid flow meter: - ZFG-F split electromagnetic acid flow meter measurement principle is based on Faraday's law of electromagnetic induction, split electromagnetic acid flow meter by the sensor and converter components, the sensor installed...

Vendredi 01 juin 2018

Prix : 17 500,00 €

Product selling points: - LCD monitor - Stereo system - Foot setting place - Electrical servo system - Intelligent induction seat belts - Headset Technical Parameters Item Value Voltage AC220V Measured Power 3.5KW Weight 790kg Rated Load 150kg Number of Seats 1 ...

Jeudi 31 mai 2018

Quantité : 2000 - Prix : $1

COATING THICKNESS METER Size: CM-8820 Applications: Application: used for measuring thickness and corrosion of pressure vessels,chemical equipment,boilers,oil storag e tanks,etc.in industries of petroleum,shipbuilding,power station,and machine manufacturing. Features: Measuring method...

Jeudi 31 mai 2018

Quantité : 2000 - Prix : $1

Anticorrosion Coating Thickness Gauge Size: CM-8829H Applications: Anticorrosion Coating Thickness Gauge CM-8829H is equipped with the large range of F probe. Measuring method: F probe Coating: *paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc.(non-magnetic...)

Jeudi 31 mai 2018

Quantité : 2000 - Prix : $1

Coating Thickness Meter Size: CM-8829S Applications: Coating Thickness Meter CM-8829S has two measuring methods to choose.How to choose? Measuring method: F probe Coating: *paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc.(non-magnetic materials) *alvanizing layer...

Jeudi 31 mai 2018

Quantité : 2000 - Prix : $1

Micro Coating Thickness Meter Size: CM-1210-200F Applications: Measuring method: F probe Coating: *paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc.(non-magnetic materials) *alvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile...

Mercredi 30 mai 2018

Quantité : 2000 - Prix : $1

Applications: Applicable of wood fiber materials, wooden articles, Chinese traditional medicine, tobacco, cotton paper, building, soil and other fibre materials. Details: Operating Principle Electromagnetic induction Measuring Range 0~80 % Accuracy ±（0.5%n+0.5） Resolution 0...

Mercredi 30 mai 2018

Quantité : 2000 - Prix : $1

Standard Type Coating Thickness Gauge Size: CM-8826FN Applications: Standard Type Coating Thickness Gauge CM-8826FN has two measuring methods to choose.How to choose? Measuring method: F probe Coating: *paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc.(non-magnetic...)

Mardi 29 mai 2018

Quantité : 2000 - Prix : $1

COATING THICKNESS METER Size: CM-8821 Applications: Application: used for measuring thickness and corrosion of pressure vessels,chemical equipment,boilers,oil storag e tanks,etc.in industries of petroleum,shipbuilding,power station,and machine manufacturing. Features: Measuring method...

Mardi 29 mai 2018

Quantité : 2000 - Prix : $1

Standard Type Coating Thickness Gauge Size: CM-8825FN Applications: Standard Type Coating Thickness Gauge CM-8825FN has two measuring methods.How to choose? Measuring method: F probe Coating: *paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc.(non-magnetic materials)...

Mardi 29 mai 2018

Quantité : 2000 - Prix : $1

Statistical Type Coating Thickness Gauge Size: CM-8856 Applications: Statistical Type Coating Thickness Gauge CM-8856 has two measuring methods to choose.How to choose? Measuring method: F probe Coating: *paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc.(non-magnetic...)

Mardi 29 mai 2018

Quantité : 2000 - Prix : $1

Basic Type Coating Thckness Gauge Size: CM-8828 Applications: Basic Type Coating Thckness Gauge CM-8828 has two measuring methods to choose.How to choose? Measuring method: F probe Coating: *paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc.(non-magnetic materials)...

Mardi 29 mai 2018

Quantité : 2000 - Prix : $1

Coating Thickness Meter Size: CM-8829 Applications: Coating Thickness Meter CM-8829 has two measuring methods to choose.How to choose? Measuring method: F probe Coating: *paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc.(non-magnetic materials) *alvanizing layer...

Mardi 29 mai 2018

Quantité : 2000 - Prix : $1

Statistical Type Coating Thickness Gauge Size: CM-8855 Applications: Coating thickness gauge CM-8855 has two measuring methods to choose.How to choose? Measuring method: F probe Coating: *paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc.(non-magnetic materials)...

Mardi 29 mai 2018

Quantité : 2000 - Prix : $1

Coating Thickness Meter Size： CM-1210A Applications： The F probes measure the thickness of non-magnetic materials (e.g. paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc.) on magnetic materials (e.g. iron, nickle etc.) . often used t o measure the thickness of...

Mardi 29 mai 2018

Quantité : 2000 - Prix : $1

Coating Thickness Meter Size： CM-1210B Applications： The F probes measure the thickness of non-magnetic materials (e.g. paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc.) on magnetic materials (e.g. iron, nickle etc.) . often used t o measure the thickness of...

Mardi 29 mai 2018

Quantité : 2000 - Prix : $1

COATING THICKNESS METER Size: CM-8822 Applications: Application: used for measuring thickness and corrosion of pressure vessels,chemical equipment,boilers,oil storag e tanks,etc.in industries of petroleum,shipbuilding,power station,and machine manufacturing. Features: Measuring method...

Mercredi 23 mai 2018

Quantité : 9999999999 - Prix : Negotiable

Vertical Lathe Factory In China China CNC Vertical Lathe: Vertical Lathe Factory In China 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while...

Mercredi 23 mai 2018

Quantité : 9999999999 - Prix : Negotiable

China vertical lathe manufacturer 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking plastic...

Mercredi 23 mai 2018

Quantité : 9999999999 - Prix : Negotiable

China CNC Vertical Lathe: Vertical Lathe Factory In China 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is...

Mercredi 23 mai 2018

Quantité : 9999999999 - Prix : Negotiable

China Vertical Lathe: 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking plastic (including...)

Mercredi 23 mai 2018

Quantité : 9999999999 - Prix : Negotiable

Double Column Vertical Lathe: 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking plastic...

Mercredi 23 mai 2018

Quantité : 9999999999 - Prix : Negotiable

CNC Double Column Vertical Lathe: 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking plastic...

Mercredi 23 mai 2018

Quantité : 9999999999 - Prix : Negotiable

Single Column Vertical Lathe 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking plastic...

Samedi 12 mai 2018

In the daily use of collision guardrails, the use of W-beam guardrail is the most widely used. W-beam guardrail can be used for highway anti-collision bar, general road (provincial road, county road, township road, etc.) anti-collision fence, factory area, construction site, forest...

Mardi 24 avril 2018

Quantité : 30000 - Prix : USD27.15

MD6214 Band Saw Blade Diamond Coated 62"x1/4"Jewelry Tool Replacement Diamond Band Saw Blades have proven be an effective diamond machining tools on a large variety of materials and applications.Diamond blades are diamond coated for wet cutting stone,glass,marble,tile,ceramic and...

Mercredi 11 avril 2018

Quantité : 1000 - Prix : 1,00 €

We are a Turkish manufacture and company Ay Yedek Parca in Istanbul Turkey , we can supply genuine and replacement parts JCB 3cx & 4cx , HMK ,MST ,VOLVO ,TEREX ,PERKINS, PARKER ,HEMA ,VALEO ,DONALDSON . From Turkey with a good quality and competitive price, ,please feel free to...

Mercredi 28 mars 2018

Quantité : 100-500 - Prix : 500-100000

- Fast heating speed: The workpiece can be heated within 1 second. - Wide range of heating products: Induction heating can heat the entire metal; also it can heat a certain part of the metal. - Easy to install: connect power supply, induction coil and water inlet and outlet pipe for use...

Mercredi 28 mars 2018

Quantité : 100-500 - Prix : 500-100000

- Fast heating speed: The workpiece can be heated within 1 second. - Wide range of heating products: Induction heating can heat the entire metal; also it can heat a certain part of the metal. - Easy to install: connect power supply, induction coil and water inlet and outlet pipe for use...

Mercredi 28 mars 2018

Quantité : 100-500 - Prix : 500-100000

- Fast heating speed: The workpiece can be heated within 1 second. - Wide range of heating products: Induction heating can heat the entire metal; also it can heat a certain part of the metal. - Easy to install: connect power supply, induction coil and water inlet and outlet pipe for use...

Mercredi 28 mars 2018

Quantité : 100-500 - Prix : 500-100000

- Fast heating speed: The workpiece can be heated within 1 second. - Wide range of heating products: Induction heating can heat the entire metal; also it can heat a certain part of the metal. - Easy to install: connect power supply, induction coil and water inlet and outlet pipe for use...

Mercredi 28 mars 2018

Quantité : 100-500 - Prix : 500-100000

- Fast heating speed: The workpiece can be heated within 1 second. - Wide range of heating products: Induction heating can heat the entire metal; also it can heat a certain part of the metal. - Easy to install: connect power supply, induction coil and water inlet and outlet pipe for use...

Samedi 27 janvier 2018

Quantité : 300000ton/ - Prix : USD300/ton

Usage: Used for low pressure liquid delivery, such as water, gas, and oil. Process: ERW (Electric Resistance Welded) HFI (High Frequency Induction) EFW(ELECTRIC FUSION WELDED TUBE) HFW(High-Frequency Welding) Quality Standard: ERW HFI , EFW,: GB/T3091 Welded steel pipe for low pressure...

Jeudi 11 janvier 2018

- Email: BuyDermaRollers@hotmail.com - Product Name 3 in 1 - Brand Name DRS - Handle Color White/black/gold/sliver - Needle Number 1200/600/180 roller - Needle Length 0.2/0.25/0.3/0.5/0.75/1.0/1.5/2.0/2.5/3. 0mm - Needle Material Stainless Steel/Titanium Alloy - Roller Color...

Jeudi 14 décembre 2017

Quantité : 800pcs - Prix : 1-5usd

Product Description 1.Size: Any size can be customized 2.Material: Aluminum Alloy 3.Finish: Any surface can be customized 4.Rohs and ISO 9001 Certificates 5.OEM and ODM is welcome 6.Application: VGA/ Electronic/Medical /Industrial equipment Our Services 1)Product type: 1. extruded heat sink 2...

Samedi 09 décembre 2017

Z4 series DC motors, the prime mover of machinery, are widely used in mill auxiliary of metallurgical industry, metal-cutting machine tool, paper making, printing, textile, printing and dyeing, cement-making as well as plastic extruding machine, etc. Outline and mounting dimensions...

Samedi 11 novembre 2017

Quantité : 500PCS(MOQ) - Prix : 85,00 €

MOTOR: AC Induction Consumption: 　 250W/220V Feeding Chute: 81MM Big Mouth R.P.M 　 50 Jug applications: BPA free jug Warranty: 　 10 years for motor/3 year for other parts Outer shell & Pusher ABS Color: 　 White, Red, Black and Silver Product Size: (LxWxH) 25X16X45CM...

Vendredi 27 octobre 2017

Prix : 10,00 €

Localisation : No.1, Lu Tong Road, Yangshan Industrial Park, Huishan District, Wuxi City, Jiangsu Province, 214000 Wuxi, Personne à contacter : Gu Patty, 86 510 83958901

Mardi 24 octobre 2017

Quantité : 9999999999 - Prix : Negotiable

CKQ5240E Double Column CNC Vertical Lathe Such series of products adopt modularization design and the function can be selected arbitrarily. The product design is mature and reliable, thus, large amount of users have selected them.2. With 100% full manual operation function, the common...

Mardi 24 octobre 2017

Quantité : 9999999999 - Prix : Negotiable

CK5235E Double Column CNC Double Column Vertical Lathe Such series of products adopt modularization design and the function can be selected arbitrarily. The product design is mature and reliable, thus, large amount of users have selected them.2. With 100% full manual operation function...

Mardi 24 octobre 2017

Quantité : 9999999999 - Prix : Negotiable

CK5231E Double Column CNC Vertical Lathe china Such series of products adopt modularization design and the function can be selected arbitrarily. The product design is mature and reliable, thus, large amount of users have selected them.2. With 100% full manual operation function, the...

Mardi 24 octobre 2017

Quantité : 9999999999 - Prix : Negotiable

CK5225E Double Column CNC Vertical Lathe 1. Such series of products adopt modularization design and the function can be selected arbitrarily. The product design is mature and reliable, thus, large amount of users have selected them.2. With 100% full manual operation function, the...

Mardi 24 octobre 2017

Quantité : 9999999999 - Prix : Negotiable

CK5228E Double Column CNC Vertical Lathes 1. Such series of products adopt modularization design and the function can be selected arbitrarily. The product design is mature and reliable, thus, large amount of users have selected them.2. With 100% full manual operation function, the...

Samedi 21 octobre 2017

Quantité : 7000 - Prix : 6,00 €

SUPERBE LOT DE POELES EN FONTE ALUMINIUM INDUCTION INTERDIT DE VENTE EN FRANCE 1500 POELES DE 20CM A 6 EUROS 1500 POELES DE 24CM A 8 EUROS 1500 POELES DE 28CM A 10 EUROS 1500 GRILLS A 7 EUROS 1000 SAUTEUSES A 9.50 EUROS PRIX EXW VAUX EN VELIN 69120 FRANCE QUALITE TRES EPAISSE Localisation ...

Mercredi 18 octobre 2017

CQ5240E Double column Vertical Lathe for sale 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding...

Mercredi 18 octobre 2017

Prix : Negotiable

C5235E Double-column Vertical Lathes 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type...

Mercredi 18 octobre 2017

C5231E Double-column Vertical Lathes china 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding...

Mercredi 18 octobre 2017

C5228E Double-column Vertical Lathe 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type...

Mercredi 18 octobre 2017

Quantité : 9999999999

C5225E Double-column Vertical Lathe 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type...

Mardi 17 octobre 2017

C5126E Single Column Vertical Lathes 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Mardi 17 octobre 2017

C5123E Single Column Vertical Lathes china 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Mardi 17 octobre 2017

C5120E Single Column Vertical Lathe china 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Mardi 17 octobre 2017

C5116E Single Column Vertical Lathe , the picture is the product exported to the USA. 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the...

Mardi 17 octobre 2017

C5112E Single Column Vertical Lathe 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Samedi 09 septembre 2017

Prix : EXW 4-9 USD

Product Description Each set can have 4 push buttons and 4 doorbells at most. You can combine them by yourself. Features Modern and Stylish design IP44 Waterproof transmitter (some model) 32/51 polyphony melodies 4 Volume adjustable (mute included) Over 150 meters operation...

Lundi 04 septembre 2017

Quantité : 70 - Prix : 17,00 €

Bonjour LOT DE SAUTEUSE TEFAL REVELATION 26cm TOUS FEUX DONT INDUCTION Localisation : 26 rue st-exupery, 01100 oyonnax, Personne à contacter : farouk soldeur, 06 35 27 42 68

Jeudi 17 août 2017

Quantité : 1 - Prix : 197,00 €

1.Integrated with magnetic-induction probe (F) and eddy current probe (N), switch to the suitable probe automatically according to the material to be measured. 2.Digital LCD display(1.9inch×1.46inch) with backlight . 3.4 statistical data can be displayed: Mean, Max, Min,Sdev. 4.500...

Vendredi 04 août 2017

Quantité : 100000000 - Prix : 680,00 €

Usage: Used for low pressure liquid delivery, such as water, gas, and oil. Oil drilling and machinery manufacturing, etc. ERW: Electric Resistance Welded pipe HFI: High Frequency Induction weld pipe EFW: Electric Fusion Welded Pipe Standard: API 5L, API 5CT, ASTM 53, EN10217, DIN 2458...

Vendredi 04 août 2017

Quantité : 1000 - Prix : Negotiable

1.WEG Soft Starter SSW7000 Soft-Starters are static starters that accelerate, decelerate and protect three-phase induction motors. The control of the voltage applied to the motor by means of adjustments to the firing angle of thyristors allows the soft-starter to start and stop...

Vendredi 04 août 2017

Quantité : 1000 - Prix : 299,00 €

The Allen-Bradley SMC-50 Smart Motor Controller provides microprocessor-controlled, solid-state (SCR, no bypass) starting for standard three-phase squirrelcage induction or Wye-Delta (6-lead) motors. Allen-Bradley SMC-50 Smart Motor Controllers Features: 90…520 A range Nine standard...

Jeudi 03 août 2017

Quantité : 800pcs - Prix : 1-5usd

Product Description 1.Size: Any size can be customized 2.Material: Copper 3.Finish: Any surface can be customized 4.Rohs and ISO 9001 Certificates 5.OEM and ODM is welcome 6.Application: Industrial equipment with big power. Our Services 1)Product type: 1. extruded heat sink 2. heat...

Jeudi 03 août 2017

Quantité : 800pcs - Prix : 1-8usd

Product Description 1. Type: heat pipe heat sink 2. Any size and surface finish can be customed 3.Rohs and ISO 9001 Certification 5.OEM and ODM is welcome 6.Application: Industical machine Our Services Product type 1. extruded heat sink 2. heat pipe heat sink 3. skiving fin heat sink 4...

Jeudi 03 août 2017

Product description: QT-ML3 portable soil moisture/temperature meter can be used for the measurement of moisture of various types of soil and media, and it can be used as a basic tool for on-site observation or mobile measurement. Principle Using FDR (frequency domain reflectometry) principle...

Jeudi 03 août 2017

Prix : 1,00 €

Product Name: PD006 - Sweden FPC1020 fingerprint collector - Capacitance fingerprint collector(192*192pixels) - High quality, high security, high efficiency of autonomous recognition algorithm - USB, UART and SPI three kinds of interfaces - 0.001% FAR，0.1% FRR（Level 3） - 3000pcs...

Mardi 01 août 2017

http://www.channeleco.com/en/Item/Show.asp?m=1&d=1220 Product description：QT-CO2 meter is used to measure carbon dioxide by non-dispersive infrared induction principle, in the meantime it can measure temperature, humidity, dew point and wet bulb temperature. The meter is equipped...

Dimanche 09 juillet 2017

Quantité : 100 - Prix : 5 000,00 €

L'usine de purification d'huile Transformer à vide d'Acorefiltration utilise un principe d'induction électromagnétique pour changer la tension alternative du dispositif, les composants principaux sont la bobine primaire, la bobine secondaire et le noyau. Les principales fonctions sont...

Mercredi 21 juin 2017

Quantité : 1 SET - Prix : 250USD

CDZ MARINE FAIBLE NOISE AXIAL FLOW FAN 1.PREFACE Les ventilateurs axiaux de la série CDZ pour les ventilateurs série série marine ou marine sont conçus et fabriqués selon les normes de l'état pour GB11865 "Ventilateur centrifuge marin", GB11864 "Ventilateurs de flux axiaux à l'épreuve...

Vendredi 16 juin 2017

Description of digital gauss meter : Digital gauss meter is designed according to the principle of hall effect desktop digital tesla meter. It has a wide range, high resolution, high stability and accuracy. The instrument electronic circuit part has 0.05% of the linearity, precision...

Jeudi 15 juin 2017

Quantité : 1000pcs - Prix : 1-5usd

Product Description Size: 150x150x50mm Voltage: 110/220V Fan Speed: 2000~2500RPM Air Flow: 156.91~192.8CFM Bearing: Sleeve bearing/Two ball bearing Noise: 40~48dBA Rated Current: 0.15~0.5A Operation Temperature: -10℃~70℃ Frame & Impeller material: UL Plastic 94V-0 Our Services Product type1...

Mercredi 14 juin 2017

Quantité : 100 - Prix : 10000-1500000

1. 3 ton/hour steel induction furnace for foundry Our furnace have high melting efficiency, good energy saving effect, good metal component uniformity, less burning loss, speedy temperature rise, is suitable for all kinds of metal melting. 2. Product parameters: Items 3T furnace...

Vendredi 09 juin 2017

Quantité : large - Prix : negotiable

Kingtronics International Company a été créée en 1995 à Hong Kong pour gérer toutes les ventes et le marketing. Usines situées dans la ville de Xihe, district de Longquanyi, Chengdu, Sichuan et Lian Si, Xianggang, ville de Zhaoqing, province de Guang Dong, Chine. En 1990, nous avons...

Dimanche 28 mai 2017

Single effect evaporator means the concentrate is completed in only one evaporator and the secondary vapor generated by evaporation is not be used again. Scope of application: Applicable to the food, pharmaceutical, chemical, environmental protection and other sectors of the low-temperature...

Dimanche 28 mai 2017

Scope of application: Applicable to the food, pharmaceutical, chemical, environmental protection and other sectors of the low-temperature evaporation and concentration, this evaporator has characteristics of high heat transfer efficiency, short heating time, so especially suitable...

Samedi 01 avril 2017

- Specifications - Condition: New Voltage: 380V/50HZ or customed Power(W): 3-110kw Warranty: one year Place of Origin: Henan, China (Mainland) - Packaging & Delivery - Packaging Details: Rotary Drum Dryer Loading with 20GP,40GP,40HQ container, main frame nude packing, motors...

Samedi 01 avril 2017

- Specifications - Condition: New Place of Origin: Henan, China (Mainland) Voltage: 380V/50HZ or customed Power(W): 3-110kw Weight: depend on the detail model Certification: CE, ISO,CCC,BV Warranty: one year Material: Q345 Aolly steel Drying temperature: ≤750℃ Kaolin Iput Moisture...

Dimanche 26 mars 2017

- Specifications - Condition: New Voltage: 380V/50HZ or customed Power(W): 3-110kw Warranty: one year Place of Origin: Henan, China (Mainland) - Packaging & Delivery - Packaging Details: Rotary Drum Dryer Loading with 20GP,40GP,40HQ container, main frame nude packing...

Dimanche 26 mars 2017

- Specifications - Condition: New Place of Origin: Henan, China (Mainland) Voltage: 380V/50HZ or customed Power(W): 3-110kw Weight: depend on the detail model Certification: CE, ISO,CCC,BV Warranty: one year Material: Q345 Aolly steel Drying temperature: ≤750℃ Kaolin Iput Moisture...

Dimanche 26 mars 2017

- Specifications - Condition: New Voltage: 380V/50HZ or customed Power(W): 3-110kw Warranty: one year Place of Origin: Henan, China (Mainland) - Packaging & Delivery - Packaging Details: Rotary Drum Dryer Loading with 20GP,40GP,40HQ container, main frame nude packing...

Dimanche 26 mars 2017

- Specifications - Condition: New Place of Origin: Henan, China (Mainland) Voltage: 380V/50HZ or customed Power(W): 3-110kw Weight: depend on the detail model Certification: CE, ISO,CCC,BV Warranty: one year Material: Q345 Aolly steel Drying temperature: ≤750℃ Kaolin Iput Moisture...

Vendredi 24 mars 2017

Quantité : 2000pcs - Prix : 1-5usd

Our Services Product type 1. extruded heat sink 2. heat pipe heat sink 3. skiving fin heat sink 4. stamping heat sink 5. die casting heat sink 6. precision CNC machining heat sink 7. forging heat sink 8. heat pipe,copper pipe 9. cooling fan: DC computer case fan, AC fan, EC fan 10...

Mercredi 22 mars 2017

Quantité : 800pcs - Prix : 1-8usd

Product Description 1.Size: Any size can be customized 2.Material: Aluminum Alloy 3.Finish: Any surface can be customized 4.Rohs and ISO 9001 Certificates 5.OEM and ODM is welcome 6.Application: Electronic/Medical /Industrial equipment Our Services Product type 1. extruded heat sink 2...

Mercredi 22 mars 2017

Quantité : 800pcs - Prix : 1-8usd

Product Description 1.Type: extruded heat sink 2.Material: Aluminum Alloy 3.Finish: Any surface can be customized 4.Rohs and ISO 9001 Certificates 5.OEM and ODM is welcome 6.Application: VGA/ Electronic/Medical /Industrial equipment Our Services Product type 1. extruded heat sink 2...

Mercredi 22 mars 2017

FAUCET, VALVE, HOSE CUT, ASSEMBLY, LEAK TEST MACHINES YOUTUBE VIDEOS ADDRESS. PLASTIC WATER VALVE LEAKAGE TEST MACHINE https://www.youtube.com/watch?v=s3KLxZeKRh0 FILTER LEAKAGE TEST MACHINE https://www.youtube.com/watch?v=3XDw9pwcn6E HOSE CUT, ASSEMBLY AND CLAMP MACHINE https://www...

Mardi 21 mars 2017

- Specifications - Condition: New Place of Origin: Henan, China (Mainland) Voltage: 380V/50HZ or customed Power(W): 3-110kw Weight: depend on the detail model Certification: CE, ISO,CCC,BV Warranty: one year Material: Q345 Aolly steel Drying temperature: ≤750℃ Kaolin Iput Moisture...

Mardi 21 mars 2017

- Specifications - Condition: New Voltage: 380V/50HZ or customed Power(W): 3-110kw Warranty: one year Place of Origin: Henan, China (Mainland) - Packaging & Delivery - Packaging Details: Rotary Drum Dryer Loading with 20GP,40GP,40HQ container, main frame nude packing...

Mardi 14 mars 2017

Quantité : 2000pcs - Prix : 1-5usd

Our Services Product type 1. extruded heat sink 2. heat pipe heat sink 3. skiving fin heat sink 4. stamping heat sink 5. die casting heat sink 6. precision CNC machining heat sink 7. forging heat sink 8. heat pipe,copper pipe 9. cooling fan: DC computer case fan, AC fan, EC fan 10...

Mardi 14 mars 2017

Quantité : 2000pcs - Prix : 1-5usd

Our Services Product type 1. extruded heat sink 2. heat pipe heat sink 3. skiving fin heat sink 4. stamping heat sink 5. die casting heat sink 6. precision CNC machining heat sink 7. forging heat sink 8. heat pipe,copper pipe 9. cooling fan: DC computer case fan, AC fan, EC fan 10...

Mardi 14 mars 2017

Quantité : 2000pcs - Prix : 1-5usd

Our Services Product type 1. extruded heat sink 2. heat pipe heat sink 3. skiving fin heat sink 4. stamping heat sink 5. die casting heat sink 6. precision CNC machining heat sink 7. forging heat sink 8. heat pipe,copper pipe 9. cooling fan: DC computer case fan, AC fan, EC fan 10...

Vendredi 10 mars 2017

Quantité : 500pcs - Prix : 3-10usd

Our Services Product type 1. extruded heat sink 2. heat pipe heat sink 3. skiving fin heat sink 4. stamping heat sink 5. die casting heat sink 6. precision CNC machining heat sink 7. forging heat sink 8. heat pipe,copper pipe 9. cooling fan: DC computer case fan, AC fan, EC fan 10...

Jeudi 09 mars 2017

Quantité : 2000pcs - Prix : 1-8usd

The Specification of TEC Our Services Product type 1. extruded heat sink 2. heat pipe heat sink 3. skiving fin heat sink 4. stamping heat sink 5. die casting heat sink 6. precision CNC machining heat sink 7. forging heat sink 8. heat pipe,copper pipe 9. cooling fan: DC computer case fan...

Mercredi 08 mars 2017

Quantité : 2000pcs - Prix : 1-5usd

Our Services Product type 1. extruded heat sink 2. heat pipe heat sink 3. skiving fin heat sink 4. stamping heat sink 5. die casting heat sink 6. precision CNC machining heat sink 7. forging heat sink 8. heat pipe,copper pipe 9. cooling fan: DC computer case fan, AC fan, EC fan 10...

Mardi 07 mars 2017

Quantité : 2000pcs - Prix : 1-5usd

Product Description 1.Size: Any size can be customized 2.Material: Aluminum Alloy 3.Finish: Any surface can be customized 4.Rohs and ISO 9001 Certificates 5.OEM and ODM is welcome 6.Application: VGA/ Electronic/Medical /Industrial equipment Our Services Product type 1. extruded...

Mardi 07 mars 2017

Quantité : 1000 - Prix : $399

Emerson Motor A&S Electric Motors Co., Ltd, your trustable partner for a satisfacoty solution for electric motors. We have availability for a full range of Emerson Motors listed as below: Emerson Induction motor Emerson single phase induction motor Emerson Three-phase motor...

Samedi 04 mars 2017

Quantité : 1000pcs - Prix : 1-5usd

Product Description 1. Type: heat sink+ fan 2. Any size and surface finish can be customized 3. Rohs and ISO 9001 Certification 4. OEM and ODM is welcome 5. Application: electronic refrigerator, car refrigerator, cosmetic cooler,refrigerator. Our Services Product type 1. extruded...

Samedi 04 mars 2017

Quantité : 1000pcs - Prix : 1-8usd

Product Description 1. Type: heat sink+ fan 2. Any size and surface finish can be customized 3. Rohs and ISO 9001 Certification 4. OEM and ODM is welcome 5. Application: electronic refrigerator, car refrigerator, cosmetic cooler,refrigerator. Our Services Product type 1. extruded...

Jeudi 23 février 2017

Quantité : 2000pcs - Prix : 1-5usd

GX37-WBDM3650 37mm gearbox + WBDM3650 Brushless DC Motor Maximum load 10kg.cm Reduction Ratio: 6,10,19,30,44,56,90,131,169,270,506,810 Product type 1. extruded heat sink 2. heat pipe heat sink 3. skiving fin heat sink 4. stamping heat sink 5. die casting heat sink 6. precision...

Mercredi 15 février 2017

Quantité : 1000pcs - Prix : 1-5usd

Product Description 1.Type: aluminum die casting 2.Material: Aluminium 3.Any size and surface can be customized 4.Rohs and ISO 9001 Certificates 5.OEM and ODM is welcome 6.Application: Industry/Medical/Military machines, automobile. Our Services Product type 1. extrusion 2...

Mardi 14 février 2017

Quantité : 1000pcs - Prix : 1-5usd

Product Desciption 1.Type: skiving fin heat sink 2.Material: Copper CU1100 3.Finish: any surface can be customized 4.ROHS and ISO 9001 Certificates 5.OEM and ODM is welcome 6.Application: computer mainboard, CPU, Server. Our Services Product type 1. extruded heat sink 2. heat...

Dimanche 12 février 2017

Quantité : 1000pcs - Prix : 5.4usd

Product Desciption 1.Type: skiving fin heat sink 2.Material: Copper CU1100 3.Finish: any surface can be customized 4.ROHS and ISO 9001 Certificates 5.OEM and ODM is welcome 6.Application: computer mainboard, CPU, Server. Our Services Product type 1. extruded heat sink 2. heat...

Dimanche 12 février 2017

Quantité : 1000pcs - Prix : 4.6usd

Products Description 1.Size: Any sizes can be customized 2.Materail : Aluminum Alloy 3. Finish: Any surface can be customised 4.Rohs and ISO 9001 Certificates 5. OEM and ODE is welcome 6.Application: VGA/Electronic/Medical/Industrial equipments Our Service 1)Product type: 1...

Samedi 11 février 2017

Quantité : 1000pcs - Prix : 1-5usd

Product Description: Product Description 1.Size: 108*83*32mm 2.Power: 5W 3.Material: Aluminum 4.Finish: Any surface can be customized 5.Rohs and ISO 9001 Certificates 6.OEM and ODM is welcome 7.Application: LED light, LED street light, cap-lamp,down light ect. Our services Product type 1...

Vendredi 10 février 2017

Quantité : 1000pcs - Prix : 1-5usd

Product Description Material : Aluminum,Brass,Copper,Magnesium alloy,Stainless steel,Titanium,Delrin, PC, Steel ect Tolerance: 0.005mm-0.1mm or standard tolerance Finish: Anodizing, zinc/nickel/chrome plating,powder coating, painting,milling finish available Processing: CNC machining...

Vendredi 10 février 2017

Quantité : 500pcs - Prix : 1-8usd

Product Desciption 1.Type: skiving fin heat sink 2.Material: Copper CU1100 3.Finish: any surface can be customized 4.ROHS and ISO 9001 Certificates 5.OEM and ODM is welcome 6.Application: computer mainboard, CPU, Server. Our Services Product type 1. extruded heat sink 2. heat...

Jeudi 09 février 2017

Quantité : 1000pcs - Prix : 1-5usd

Product Description: Product Description 1.Size: Any size can be customized 2.Material: Aluminum Alloy 3.Finish: Any surface can be customized 4.Rohs and ISO 9001 Certificates 5.OEM and ODM is welcome 6.Application: VGA/ Electronic/Medical /Industrial equipments Our Services 1)Product type...

Jeudi 09 février 2017

Quantité : 500pcs - Prix : 1-8usd

Product Description 1.Size: Any size can be customized 2.Material: Copper 3.Finish: Any surface can be customized 4.Rohs and ISO 9001 Certificates 5.OEM and ODM is welcome 6.Application: Industrial equipment with big power. Our Services 1)Product type: 1. extruded heat sink 2...

Lundi 23 janvier 2017

Quantité : 1-10000 - Prix : USD1489/unit

1. Application Continuous induction Sealing Machine utilizes electromagnetic principle, producing instant high heat, which can melt and seal an aluminum foil to a bunghole. It features excellent wet-proof, fungus-proof and imitation-proof and an extension of preservation cycle...

Mercredi 18 janvier 2017

Quantité : 1 piece - Prix : 90,00 €

There are many types of high bay lighting or induction high bay lighting in the market,but why choose XPES Induction high bay lighting? Low damage rate Superiority of the induction lighting Our induction high bay lighting cases show that many of our customer have bought our...

Vendredi 30 décembre 2016

Quantité : 1000 - Prix : $500

S&A industrial chiller for induction heater S&A CW-5000 industrial chiller with compact size, long working life and simple operation has high precision temperature control in laser systems. S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity...

Jeudi 29 décembre 2016

Quantité : 1000pcs - Prix : 1-5usd

Product Description Size: 120x120x38mm Voltage: 110/220V Fan speed: 2000~2500RPM Air Flow: 67.10~80.32CFM Bearing: Sleeve bearing/Two ball bearing Noise: 38~42dBA Rated Current: 0.06~0.22A Blade material: Plastic UL 94V-0 Operation Temperature: -10ºC~70ºC Our Services Product type 1...

Mardi 27 décembre 2016

Quantité : 1000pcs - Prix : 1-8usd

Product Description Size: 120X120X25mm Voltage: 110/220V Fan speed: 1800~2100RPM Air Flow: 45.09~53.97CFM Bearing: Sleeve bearing/Two ball bearing Noise: 34~38dBA Rated Current: 0.07~0.15A Blade material: Plastic UL 94V-0 Operation Temperature: -10℃~70℃ Our Services Product type 1...

Mardi 27 décembre 2016

Quantité : 1000pcs - Prix : 1-8usd

Product Description Size: 110*110*25mm Voltage: 110/220V Fan speed: 2000~2200RPM Air Flow: 44.15~48.87CFM Bearing: Sleeve bearing/Two ball bearing Noise: 30~36dBA Rated Current: 0.08~0.2A Blade material: Plastic UL 94V-0 Operation Temperature: -10℃~70℃ Our Services Product type 1...

Mardi 27 décembre 2016

Quantité : 1000pcs - Prix : 1-8usd

Product Description Size: 80*80*38mm Voltage: 110/220V Fan speed: 2400~2800RPM Air Flow: 25.92~30.22CFM Bearing: Sleeve bearing/Two ball bearing Noise: 26~30dBA Rated Current: 0.07~0.18A Blade material: Plastic UL 94V-0 Operation Temperature: -10~70℃ Our Services Product type 1...

Mercredi 21 décembre 2016

Quantité : 1000pcs - Prix : 1-8usd

Product Description Size: 80*80*25mm Voltage: 110/220V Fan Speed: 2300~2600 RPM Air Flow: 16.52~19.68CFM Bearing: Sleeve bearing/Two ball bearing Noise: 20~24dBA Rated Current: 0.07~0.15A Operation Temperature: -10℃~70℃ Frame & Impeller material: UL Plastic 94V-0 Our Services...

Mardi 20 décembre 2016

Quantité : 1000pcs - Prix : 1-8usd

Product Description Size: 92*92*38mm Voltage: 110/220V Fan Speed: 2200~2500RPM Air Flow: 37.22~41.65CFM Bearing: Sleeve bearing/Two ball bearing Noise: 27~31dBA Rated Current: 0.07~0.18A Operation Temperature: -10℃~70℃ Frame & Impeller material: UL Plastic 94V-0 Our Services...

Mardi 20 décembre 2016

Quantité : 1000pcs - Prix : 1-8usd

Product Description Size: 150x150x50mm Voltage: 110/220V Fan Speed: 2000~2500RPM Air Flow: 156.91~192.8CFM Bearing: Sleeve bearing/Two ball bearing Noise: 40~48dBA Rated Current: 0.15~0.5A Operation Temperature: -10℃~70℃ Frame & Impeller material: UL Plastic 94V-0 Our Services...

Vendredi 16 décembre 2016

Quantité : 2000pcs - Prix : 1-8usd

Product Description Size: 172x150x51mm Voltage: 110/220V Fan Speed: 2000~2500RPM Air Flow: 156.91~192.8CFM Bearing: Sleeve bearing/Two ball bearing Noise: 40~48dBA Rated Current: 0.15~0.5A Operation Temperature: -10℃~70℃ Frame & Impeller material: UL Plastic 94V-0 Our Services...

Vendredi 16 décembre 2016

Quantité : 2000pcs - Prix : 1-8usd

Product Description Size: 120x120x32mm Voltage: 110/220V Fan speed: 2000~2500RPM Air Flow: 67.10~80.32CFM Bearing: Sleeve bearing/Two ball bearing Noise: 38~42dBA Rated Current: 0.06~0.22A Blade material: Plastic UL 94V-0 Operation Temperature: -10ºC~70ºC Our Services Product type 1...

Vendredi 16 décembre 2016

Quantité : 2000pcs - Prix : 1-8usd

Description du produit Taille: 120x120x38mm Tension: 110 / 220V Vitesse du ventilateur: 2000 ~ 2500RPM Débit d'air: 67.10 ~ 80.32CFM Roulement: roulement à billes / deux roulements à billes Bruit: 38 ~ 42dBA Courant assigné: 0.06 ~ 0.22A Matériau de la lame: Plastique UL...

Vendredi 16 décembre 2016

Quantité : 2000pcs - Prix : 1-8usd

Product Description Size: 92*92*25mm Voltage: 110/220V Fan Speed: 2200~2500RPM Air Flow: 29.85~35.66CFM Bearing: Sleeve bearing/Two ball bearing Noise: 26~30dBA Rated Current: 0.07~0.15A Operation Temperature: -10℃~70℃ Frame & Impeller material: UL Plastic 94V-0 Our Services...

Vendredi 16 décembre 2016

Quantité : 2000pcs - Prix : 1-8usd

Product Description Size: 80*80*25mm Voltage: 110/220V Fan Speed: 2300~2600 RPM Air Flow: 16.52~19.68CFM Bearing: Sleeve bearing/Two ball bearing Noise: 20~24dBA Rated Current: 0.07~0.15A Operation Temperature: -10℃~70℃ Frame & Impeller material: UL Plastic 94V-0 Our Services...

Jeudi 15 décembre 2016

Quantité : 2000pcs - Prix : 1-5usd

Product Description Size: 200x200x60mm Voltage: 110/220V Fan Speed: 2500RPM Air Flow: 380CFM Bearing: Sleeve bearing/Two ball bearing Noise: 56dBA Rated Current: 0.552A Operation Temperature: -10℃~70℃ Frame & Impeller material: UL Plastic 94V-0 Our Services Product type 1...

Mardi 13 décembre 2016

1. Description: We provide ZSRH-1500LbB according to the model and drawing number of DEC,HEC,SEC,etc, the drawings or the samples you supply. Its working principle is to use the mutual inductance in the electromagnetic induction phenomenon, its size is related to core position. 2...