TOLERANCE - 2864 Annonces

Thursday 21 April 2016

Quantité : 999

Penta prism can deviate an incident beam without inverting or reversing to 90°.The deviation angle of 90° is independent of any rotation of the prism about an axis parallel to the line of intersection of the two reflecting faces. It is commonly used in Plumb Level, Surveying, Alignment...

Thursday 21 April 2016

Quantité : 999

Right Angle Roof Prism is a right angle prism with its hypotenuse replaced by a 90° roof. The prism is used where both right angle deflection and image are required. Crysmit can provide roof right angle prisms, roof penta or half penta prisms, Schmidt prisms, or other roof prism...

Thursday 21 April 2016

Quantité : 999

Right Angle Prism can be used to bend a beam by 90° or 180°, depending on which face is entrance face. Please refer to following image to see how it works. Now Crysmit can provide right angle prisms from 0.5mm to 50.8mm size. Special size can also be offered upon request. ...

Thursday 21 April 2016

Quantité : 999

Cylindrical lenses are used to correct astigmatism in the eye and in rangefinders, to produce astigmatism, stretching a point of light into a line, they are widely used in bar code scanning, projection optics systems, laser measurement systems and holography. Cylindrical lenses are...

Thursday 21 April 2016

Quantité : 999

Mirror is a reflecting surface that forms an image of an object when light rays coming from that object fall upon it. Usually mirrors are made of plate glass, one side of which is coated with metal or some special preparation to serve as a reflecting surface. The junction of this...

Thursday 21 April 2016

Quantité : 999

Single crystal sapphire possesses a unique combination of excellent optical, physical and chemical properties. The hardest of the oxide crystals, sapphire retains its high strength at high temperatures, has good thermal properties and excellent transparency. It is chemically resistant...

Thursday 21 April 2016

Quantité : 999 - Prix : 1$

Fused silica is a superior optical material possesses excellent optical, chemical and physical properties what is formed by chemical combination of silicon and oxygen. Advantages of fused silica material include: good UV and IR transmission, stability and resistance to thermal shock...

Thursday 21 April 2016

This kind of windows is made from SCHOTT N-BK7 Glass, which has transparent range from 330-2100nm. The BK7 window has good performance over visible and near IR spectrum for most application. The refractive index is 1.5168 at 587.6nm. Attribute Specification Material N-BK7...

Wednesday 13 April 2016

Layer count: Rigid PCB 2 - 24 + Layers; Rigid-flex PCB 1 - 10Layers Panel Size(max): 21" x 24" for Rigid, 9.05'' x 47.2'' for FPC Materials: FR-4, roger, high-TG FR-4, halogen-free FR-4 Board thickness: 0.016" to 0.120" Copper weight: Heavy copper PCB (6oz finished) Finishing...

Wednesday 06 April 2016

CNC ROTARY TABLE Table diameter: Range from Ø100~Ø800 cm Permissible cutting torque: 48~12000 FxR kg-m 0° kg Load Capacity: 300~8000 90° kg Load Capacity: 125~12000 High accuracy three pieces coupling gear Heavy cutting tolerance three pieces hirth coupling gear clamping system...

Wednesday 30 March 2016

Quantité : 30 - Prix : contact us

EMI-9KB emc or emi electromagnetic interference Introduction EMI-9KB is an automatic EMI receiver system. It is a main test system for EMI (Electro Magnetic Interference) testing. The EMI-9KB is produced by the full closure structure and strong electro-conductibility material...

Wednesday 30 March 2016

Quantité : 30 - Prix : contact us

LPCE-2(LMS-9000) 4pi integrating sphere with spectral test meter for e27 e40 and other led luminaires test Introduction: LPCE-2(LMS-9000) is high precision CCD Spectroradiometer & Integrating Sphere Test System, it is suitable for photometric and colorimetric measurement of...

Friday 25 March 2016

We can cut glass to shape and process the edges. Louvre Glass on window and Glass Shelf on shower room are our products. Their polish finish and size tolerance is controlled strictly by our people. Edgework on mirror glass and laminated glass are available. Thickness: 2-25mm Certificates...

Sunday 20 March 2016

Quantité : Minimum:20 - Prix : US $9.82 - 13.85 / K

Newest Life Casting Mold Making Silicone Rubber For Dolls Specification Of Newest Life Casting Mold Making Silicone Rubber For Dolls Welcome come to inspecting our factory, we will pick you up when you are in Guangzhou City. 1. Popular silicone rubber for toy 2. CE,ROHS 3. OEM ODM 4...

Friday 11 March 2016

Prix : 0.01-1USD

Machining Processes: Milling, Turning, Drilling, Boring, Tapping, Turning: Contour Turning, Form Turning, Taper Turning Straight Turning Threading, External Turning Threading Internal Turning Threading, Thread milling Knurling, Spline (Wire EDM), Parting/Cutting Facing, Internal Forming...

Friday 11 March 2016

Prix : 0.01-1USD

General Capabilities of metal stamping: Prototype of Stampings Production of Metal Stamping High Speed Metal Stamping Precision Metal Stamping Progressive Die Stamping High Quality, complex, tight tolerance Stamping Low volume prototypes to high volume progressive dies Taking...

Friday 11 March 2016

Prix : 0.01-1USD

General Capabilities: Prototype of Stampings Production of Metal Stamping High Speed Metal Stamping Precision Metal Stamping Progressive Die Stamping High Quality, complex, tight tolerance Stamping Low volume prototypes to high volume progressive dies Taking over existing...

Friday 11 March 2016

Prix : 0.01-1USD

General Capabilities: Prototype of Stampings Production of Metal Stamping High Speed Metal Stamping Precision Metal Stamping Progressive Die Stamping High Quality, complex, tight tolerance Stamping Low volume prototypes to high volume progressive dies Taking over existing...

Thursday 10 March 2016

Introduction: LPCE-2(LMS-9000) is high precision CCD Spectroradiometer & Integrating Sphere Test System, it is suitable for photometric and colorimetric measurement of luminaries such as Energy-saving lamps, Fluorescent lamps, HID lamps (high voltage sodium lamps and high voltage...)

Saturday 05 March 2016

Quantité : 1000 - Prix : 0.01-1

Metal stamping, stamping parts, metal stamping parts, precision stamping, , precision stamping parts, precision metal stamping parts, stamping process, stamping die, progressive die General Capabilities of Metal Stamping Parts: Prototype of Stampings Production of Metal Stamping...

Saturday 05 March 2016

Quantité : 1000 - Prix : 0.01-1

Production Method Used of metal stamping: Progressive Dies, Compound Dies, Mandrel Dies, Blanking Dies, Cam Dies; Piercing, Notching, Trimming, Stippling, Lancing, Louvering, Bending, Forming, Coining, Staking, Sem i-Perf, Extrusion, Extrude, Blank & Pushback; Feed dual material...

Saturday 05 March 2016

Quantité : 1000 - Prix : 0.01-1

Product Feature of stamping parts: Press Rating: 30 to 300 tons Max Press Speed: 600 SPM Max. Press Stroke: .5 to 9.75 in Max. Press Bed Length: 95 in Max. Press Bed Width: 33 in Part Thickness: .003 to .188 in Tolerance(+/-): Less than .0005 in Material Used of stamping parts...

Friday 26 February 2016

Molasses Filling Machine The machine is suitable for packing tobacco, molasses, mustard, chili sauce etc.The integrated processes of bag making, measuring filling, sealing cutting, counting and hot pressing codes can be done automatically. Packing material includes several kinds...

Friday 19 February 2016

Quantité : 100 - Prix : 12,00 €

Specifications: 1. Item Name > Titanium Bicycle Bike Derailleur Hanger Frame Rear Dropouts 2. Material> titanium 3.Thechnologies> investment casting&sand casting& graphite mould casting , CNC, 3D printing, superlastic forming technology, etc 4. Grade>GR1...

Monday 15 February 2016

EMI-9KB is an automatic EMI receiver system. It is a main test system for EMI (Electro Magnetic Interference) testing. The EMI-9KB is produced by the full closure structure and strong electro-conductibility material, which has high shielding effect. Due to the new technology for...

Sunday 24 January 2016

Flexible Metallic Highway Guardrail,Q235 galvanized steel metal beam road crash barrier,highway Traffic barrier Product type: W beam barrier Standard: GB JT/T281-2007, AASHTO M180, Russian standard etc. Material: hot rolled steel coils, Q235 or Q345 grade Standard size: 4320mm*310mm...

Saturday 16 January 2016

Quantité : 1kg - Prix : 7-10$

ABS 1.75mm ABS 3.00mm PLA 1.75mm PLA 3.00mm Brand Imai Imai Imai Imai Material Acrylonitrile Butadiene Styrene Acrylonitrile Butadiene Styrene Poly-Lactic Acid Poly-Lactic Acid Tolerance ±0.02 ±0.02 ±0.02 ±0.02 Diameter 1.75mm 3...

Thursday 14 January 2016

Specifications Materials: Neodymium-Iron-Boron; 2. TechnoloSuper Strong Neodymium Magnet Super Strong Neodymium Magnet Super Strong Neodymium Magnet Super Strong Neodymium gy: Utilizations of new Sintered NdFeB magnet techniques and equipment such as strip casting,HDDR technology; 3...

Tuesday 12 January 2016

BARANA A professional tiles manufacturer. Has more than 10 years experience in tile R&D and sale. Sale range: polished tile, glazed porcelain tile and ceramic floor tile, wall tile ect. Hot sale size 300*300mm tile factory Barana floor tile features: 1. Low water absorption rate, 2...

Tuesday 05 January 2016

Product name: Probiotics Appearance: Milky white to light yellow powder Assay: 1 ~ 5 X 10(11) cfu/gram Packing: 1kg，5kg, 25kg Storage: Stored in cool and dry place Shelf life: 18 months Application: Probiotics are the health enhancing functional food ingredients used therapeutically...