CA Series-770CA30 PEEK Carbon Fiber Reinforcement
Quantité : 1000kg Prix : 400-800CNY
CA Series-770CA30 carbon fiber filled PEEK reinforcement is widely used in automobile and aviation fields. It is widely used in automobile fuel pump and gearbox. It can help equipment reduce weight, reduce noise and increase the service life of wear-resistant parts, reduce or even avoid the use of lubricants.
Specification of CA Series-770CA30 PEEK Carbon Fiber Reinforcement
Material Properties |
Test Method |
Conditions |
Units |
770G |
Mechanical Data |
||||
Tensile Strength |
ISO 527 |
B reak,23℃ |
MPa |
- |
Y ield,23℃ |
MPa |
100 |
||
Tensile Elogation |
ISO 527 |
Break,23℃ |
% |
45 |
Flexural Strength |
ISO 178 |
Break,23℃ |
MPa |
- |
Y ield,23℃ |
MPa |
165 |
||
Fleoural Modulus |
ISO 178 |
23℃ |
Gpa |
4.1 |
Compressive Strength |
ISO 604 |
23℃ |
MPa |
125 |
Charpy Impact Strength |
ISO 179/leA |
Notched |
kJm-2 |
7 |
ISO 179/IU |
Unnotched |
kJm-2 |
- |
|
Izod Impact Strength |
ISO 180/A |
Notched |
kJm-2 |
7.5 |
ISO 180/U |
Unnotched |
kJm-2 |
- |
|
Mould Shrinkage |
ISO 294-4 |
Along flow |
% |
1 |
Across flow |
% |
1.3 |
||
Thermal Data |
||||
Melting Point |
ISO 11357 |
|
℃ |
343 |
Glass Tansition (Tg) |
ISO 11357 |
Onset |
℃ |
143 |
Special Heat Capacity |
DSC |
23℃ |
kj kg-1℃-1 |
2.2 |
Coefficient of Thermal Expansion |
ISO 11359 |
Along flow below Tg |
ppm K-1 |
45 |
Along flow above Tg |
ppm K-1 |
120 |
||
Heat Deflecion Temperature |
ISO 75A-f |
1.8Mpa |
℃ |
152 |
Thermal Conductivity |
ASTM C177 |
23℃ |
W m-1K-1 |
0.29 |
Flow |
||||
MeltIndex |
ISO 1133 |
380℃,5kg |
g10min-1 |
10 |
Miscellaneous |
||||
Density |
ISO 1186 |
Crystalline |
gcm-3 |
1.3 |
Amorphous |
gcm-3 |
1.26 |
||
Shore D Hardness |
ISO 868 |
23℃ |
|
85 |
Water Absorption(3.2mm thick Tensile Bar) |
ISO 62-1 |
24h,23℃ |
% |
0.07 |
by immersion |
|
Equilib riu m,23℃ |
% |
0.4 |
Electrical Data |
||||
Dielectric Strength |
IEC 60243-1 |
2mm |
kV mm-1 |
23 |
Comparative Tracking Index |
IEC 60112 |
|
V |
150 |
Dielectric Constant |
IEC 60250 |
23℃,1kHz |
|
3.1 |
23℃,50kHz |
|
3 |
||
Loss Tangent |
IEC 60250 |
23℃,1MHz |
|
0.004 |
Volume Resistivity |
IEC 60093 |
23℃,1V |
Ω cm |
10 16 |
275℃ |
Ω cm |
10 9 |
As one of peek material manufacturers, we can offer sorts of peek composite material for sale, if you are interested, please contact us.
Personne à contacter : com zhongyanpeek, (0431)89625588
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de CA Series-770CA30 PEEK Carbon Fiber Reinforcement Rechercher dans la catégorie : Matières premières Rechercher dans la catégorie : reinforcement, peek, carbon, fiber, series, 770ca30 |
Jeudi 17 janvier 2013
Quantité : 18MT - Prix : 70,00 €
Voici la citation et notre cahier des charges. Granulés de bois... ... 95Euros Charbon de bois franc... 100Euros Tournesol Husk Pellet... 80Euros Bois de chauffage... 75Euros Briquettes... ... 200Euros SPÉCIFICATIONS TYPIQUES * Cutted et partagées-(20-30 cm) * Moistured %...
NCF COMPANY
- 06070 - IZMIR
- 00905428841676
Mercredi 20 janvier 2016
Quantité : 10000 pcs - Prix : 45000 euros
VENTE STOCK: Vêtement pour enfant de 3 à 12 ans, invendus collection Printemps/Été 2015 Stock total de 10000pcs en vente à partir de 45000 euros. Vente partielle acceptée sous condition d'un minimum de 2000pcs/commande, prix à négocier. Production en petite série, 70pcs/modèle...
ASLV
- 10000 - Hanoi
- +84 4 38 72 15 51 ext 22
Mercredi 13 janvier 2016
Established in 2000, Focus CNC Co., Ltd. provides series of CNC Lathe Machinery, CNC Lathe, live tool CNC Lathe, mill turn Lathe and CNC turning machine. Due to our principle of “Humanity, Technology and Precision” in mind, we keep breaking through to become one leading Industry...
Focus CNC Co., Ltd.
- focus.cnc1999
- 428 - Taichung City
- +886 4 2560 6067