CAN232

CAN to RS232 Converter

Support data conversion between 1 CAN port and 1 RS-232 serial port

Support multiple conversion modes like transparent conversion, marked transparent conversion, Modbus RTU protocol conversion and data conversion

CAN port support 2.5kbps-1000kbps baud rate

Support 9~48VDC wide voltage input

Support -40～75℃ wide operating temperature range

CAN to serial converter is an interface converter that implements data exchange between CAN-bus network and RS-232 device. It also supports data exchange between CAN-bus network and Modbus RTU protocol. This product supports 1 CAN port and 1 RS-232 serial port, and adopts wall mounting which can meet the requirements of different scenes.

rs232 to can bus converter supports multiple conversion modes like transparent conversion, marked transparent conversion, Modbus RTU protocol conversion and data conversion. Otherwise, it provides matching CAN configuration tools which can achieve data conversion between CAN bus and RS-232 serial port via easy setting.

DIP switch could implement configuration mode enablement for device. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which could adapt to industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, building automation, healthcare automation system, measuring instrument and environment monitoring system, etc.

CAN Interface

Standard: CAN2.0A, CAN2.0B

Interface quantity: 1 CAN port

CAN signal: CANH, CANL, GND

Duplex mode: 2-wire Half Duplex Mode

Baud rate: 2.5kbps-1000kbps

Load capacity: support concurrent transmitting of 110 nodes

Transmission distance: 40m~10km

Interface form: adopt 5-pin 5.08mm pitch terminal blocks

Terminating resistor: optional external 120Ω terminating resistor

Interface protection: 2kVAC isolation protection

Serial Port

Standard: EIA RS-232C

Protocol: Modbus RTU (optional)

Serial port quantity: 1 RS-232 serial port

RS-232 signal: TXD, RXD, GND

Baud rate: 300-115200bps

Data bit: 8bit

Check bit: None, Even, Odd, Space, Mark

Stop bit: 1bit, 2bit

Interface form: DB9, Female

Transmission distance: 15m

Configuration Method

Windows configuration tool

Data Conversion Mode

Transparent conversion, marked transparent conversion, Modbus RTU protocol conversion, data conversion

LED Indicator

Power supply indicator, CAN port indicator, serial port indicator

Power Requirement

9~48VDC

2-pin 5.08mm pitch terminal blocks

Support non-polar connection

Power Consumption

No-load: 0.86W@24VDC

Full-load: 0.84W@24VDC

Environmental Limit

Operating temperature: -40~75℃

Storage temperature: -40~85℃

Relative humidity: 5%～95%(no condensation)

Physical Characteristic

Housing: IP40 protection, metal

Installation: wall mounting

Dimension (W x H x D): 69mm×22mm×100mm

Weight: 238g

Industrial Standard

IEC 61000-4-2 (ESD, electrostatic discharge), Level 3

Air discharge: ±8kV

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Certification

CE, FCC, RoHS

Warranty

3 years

Available Models

CAN

RS-232

Power Supply Range

CAN232

1

1

9~48VDC

3onedata provides 10g ethernet switch, 4G router, can bus to serial converter, rs232 to can converter, serial to can bus converter, can to rs232 converter module, can bus to rs232 converter schematic, 3onedata converter, 10g ethernet switch and etc. For more info, contact us.