Chine (Rép. pop) Divers
Divers

Cobalt Metal

Quantité : 200 tons   Prix : 25usd-100usd

Cobalt Metal for Sale

Cobalt is a shiny steel-gray metal, relatively hard and brittle, ferromagnetic, heated to 1150℃ magnetic disappear. The combined valence of cobalt is 2 and 3. It does not interact with water at room temperature and is stable in humid air. It is oxidized to CoO when heated to more than 300℃ in the air, and burned into Co3O4 when white hot. The fine cobalt metal minor powder produced by hydrogen reduction can spontaneously ignite into cobalt oxide in air.

Specification of Cobalt Metal

Chemical Composition

Co: 99.95

C: 0.005

S<0.001</p>

Mn: 0.00038

Fe: 0.0049

Ni: 0.002

Cu: 0.005

As: <0.0003</p>

Pb: 0.001

Zn: 0.00083

Si<0.001</p>

Cd: 0.0003

Mg: 0.00081

P<0.001</p>

Al<0.001</p>

Sn<0.0003</p>

Sb<0.0003</p>

Bi<0.0003</p>

Application of Cobalt Metal

Cobalt metal is mainly used to make alloys. Cobalt-based alloy is the general term for an alloy made of cobalt and chromium, tungsten, iron, and nickel. The wear resistance and machinability of the tool steel with a certain amount of cobalt can be significantly improved. Starlite carbide with cobalt-50 or more will not lose its original hardness even if heated to 1000℃. Today, this kind of carbide has become the most important material used between gold-cutting tools and aluminum.

Production Process of Cobalt Metal

The methods of extracting cobalt from cobalt-containing materials can be divided into full fire process, full wet process and combined fire and wet process. Modern cobalt extraction mostly uses a combined process.

(1) Full fire process. It was widely used before the 1940s, and now only the Panda cobalt plant in Zaire uses electric furnace to melt copper and cobalt alloys.

(2) Full wet process. It mainly includes the pressurized acid leaching, ammonia leaching, sulfuric acid leaching, nitric acid leaching and chlorination leaching of various materials containing cobalt.

(3) Joint process. It can be roughly divided into two cases: one is to use sulfation roasting (copper and cobalt concentrate, pyrite), reduction roasting (laterite ore), arsenic removal roasting (arsenic and cobalt concentrate) and other simple fire treatment, and then leaching with acid or ammonia solution; The other is in the process of copper, nickel, zinc and other metals smelting process, cobalt enrichment as an intermediate, and then wet treatment.

Due to the complexity of cobalt extraction materials, there is no "standard" or traditional process for cobalt metallurgy. However, no matter what process is used, the final production of cobalt metal generally adopts wet process, which is a major feature of cobalt metallurgy. The production of metallic cobalt from intermediate products containing cobalt obtained by various processes is usually done by drilling electrolysis or hydrogen reduction.

Features of Cobalt Metal

01.

There are 13 isotopes of cobalt, but only 59Co is found in nature. The artificially produced isotope 60Co has a wide range of uses.

02.

The stable crystal shape of cobalt at room temperature is hexagonal dense packing, while the stable structure above 673K is face-centered cubic.

03.

Cobalt is a ferromagnetic substance, similar to iron and nickel in hardness, tensile strength, mechanical properties, thermodynamic properties and electrochemical behavior.

If you want to know more kinds of refractory metals, please visit our website.

Localisation : Building 13, Courtyard No. 88, Shiliu Center, Liuxiang Road, Fengtai District, Beijing, 100079, China., 100079 Beijing,
Personne à contacter : Xie Carlos, 010 87659165

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
Cobalt Metal

Rechercher dans la catégorie : Divers
Rechercher dans la catégorie :
cobalt, metal
Taiwan 428 Pro / B2B
Focus CNC Co., Ltd.

Mercredi 13 janvier 2016

Established in 2000, Focus CNC Co., Ltd. provides series of CNC Lathe Machinery, CNC Lathe, live tool CNC Lathe, mill turn Lathe and CNC turning machine. Due to our principle of “Humanity, Technology and Precision” in mind, we keep breaking through to become one leading Industry...

Focus CNC Co., Ltd.

Corée du Sud 411-808 Hygiène / Santé
AFB Fluorochrome Auto Slide Stainer

Jeudi 27 septembre 2012

Quantité : conference - Prix : conference with clie

This Auto Stainer provides fast, easy and stable staining process for staining sputum specimen (for detecting Tubercle Bacillus) according to Fluorochrome staining method by automated system control. This new innovated stainer features advanced functions and performances over manual...

Dagatronics Corporation

  • 411-808 - Geonggi-do
  • +82 3 19 16 80 05
Russie 183038 Pro / B2B
Ice class supply vessel's hull

Dimanche 08 juillet 2012

Quantité : 1 - Prix : negotiated

  Name Neftegaz-13 Year and place of build 1984 , Poland Project B92-DZ Class KM * UL [1] A2 supply vessel   similar to DNV: +1A1 Supply Vessel, ECO, ICE-15  Purposes Carriage of , bulk cargoes, process and fresh water, methanol, fuel, oil, drilling...

MSCO

  • 183038 - Murmansk
  • +78 1 52 48 10 21
  • +79 2 16 66 33 86