THICKNESS - 10396 Annonces

Thursday 27 August 2020

Quantité : 100 sets / - Prix : USD2206-USD73529

Thermal Paper Straw Paper Film Printing Machine Use: It is suitable for printing paper, paper board, high-grade self-adhesive label and so on.Characteristic: 1. Multicolor printing is used for web printing presses, by changing the transmission route ... This 4 colors flexo label printing...

Thursday 27 August 2020

Prix : 2.4-2.9$/kg

Description of CMC Toothpaste Grade The requirements of daily necessities are increasing constantly, with the improvement of people's living standards. As a kind of daily necessity, the value of Toothpaste is not limited to mouth cleaning and gradually becomes more functional and healthy...

Thursday 27 August 2020

Quantité : 1000PCS - Prix : 0.1- 6

Mould Name: Adapter Charger Housing Mould Part Material: PC Product Size: 58.3*57.9*8.6mm Product Description: Adapter Charger Housing UK Mould Cavity: 4 Cavities Mould Size: 400*450*343MM Suitable Injection Machine: 160 ton Mould Cavity Steel: ASSAB8407 Mould Injection System: Cold...

Thursday 27 August 2020

Quantité : 1000PCS - Prix : 0.1- 6

Brief Introduction of Hanking ABS molds Mould Name: Plastic Injection ABS Molds Part Material: ABS Product Size: 172*123 mm Product Description: clear window Mould Cavity: 1 Cavity Mould Size: 300*380*250 mm Mould Cavity Steel: ASSAB 8407 Mould Injection System: hot runner Mould Ejection System...

Thursday 27 August 2020

Adhesive Teflon sheet, non-stick and abrasion resistant surface under high heat The Details of Adhesive Teflon Sheet Self Adhesive Teflon sheet is made from PTFE fabric with pressure sensitive silicone adhesive on one side, the tape can resist temperature from -73-260℃. With heavy coating PTFE...

Monday 24 August 2020

Quantité : 17000 - Prix : 17 000,00 €

Fecal suction truck is a tank truck with a heavy duty vacuum designed to pneumatically load fecal, solids, liquids, sludge and etc. Facel suction truck is equipped with special vacuum suction pump, which is applied to suck faces, sewage, sludge and other liquid mixed with small suspended...

Friday 21 August 2020

Prix : USD1000-USD150000

Model No.: Compa1300*5100,Compa1500*5100 Table Size: 1300*5100mm,1500*5100mm Speed: 0.5m/min Max Coil Thickness: 6mm/12mm Min.Order Quantity: 1 Set Supply Ability: 10 Sets per Month Port: GUANGZHOU PORT,SHENZHEN PORT Payment Terms: T/T,L/C Duct Plasma Cutting Machine COMPA5100 Products...

Friday 21 August 2020

Prix : USD1000-USD150000

Model No.: YJB-1.2*1200 Thickness Range: 0.5-1.2mm(18-27ga) Speed: 6m/min(19FPM) Max Width: 1200mm Min.Order Quantity: 1 Set Supply Ability: 10 Sets per Month Port: GUANGZHOU PORT,SHENZHEN PORT Payment Terms: T/T,L/C Lock Seaming Machine Products Information The lock seamer machine...

Friday 21 August 2020

Prix : USD1000-USD150000

The lockformer machine, also known as the seam forming machine, the edge side processing machine, the air duct lock forming machine, is a multifunction machine, mainly used for the duct lock processing of plate connection and round duct closed connection. It is very common in industrial...

Friday 21 August 2020

Prix : USD1000-USD150000

Model No.: DEM-1250 Max.Diameter: 80-1250mm Thickness Range: 0.5-1.2mm Min.Order Quantity: 1 Set Supply Ability: 10 Sets per Month Port: GUANGZHOU PORT,SHENZHEN PORT Payment Terms: T/T,L/C Hydraulic Elbow Maker Products Information COMIFO Elbow Maker is the special equipment for...

Friday 21 August 2020

Prix : USD1000-USD150000

Max Coil Width: 750mm Coil Thickness: 0.3-0.6mm Min.Order Quantity: 1 Set Supply Ability: 10 Sets per Month Port: GUANGZHOU PORT,SHENZHEN PORT Payment Terms: T/T,L/C Hand Cleat Bender Products Information Pneumatic cleat bender is a special designed cleat bender machine for the processing...

Friday 21 August 2020

Prix : USD1000-USD150000

Model No.: GDF-T20/30,DGDF-T20/T30 Max Thickness: 0.5-0.8mm(21-26ga) "a"Size: 20±0.5,30±0.5 Min.Order Quantity: 1 Set Supply Ability: 10 Sets per Month Port: GUANGZHOU PORT,SHENZHEN PORT Payment Terms: T/T,L/C GDF Flange Forming Machine Products Information As the flanging machine manufacturers...

Thursday 20 August 2020

Prix : 1 000,00 €

Polyvinyl Chloride (PVC or Vinyl) is a high strength thermoplastic material widely used in applications, such as , medical devices, wire and cable insulation... the list is endless. It is the world's third-most widely produced synthetic plastic polymer. Polyvinyl Chloride can be injection...

Thursday 20 August 2020

Prix : 1 000,00 €

PC is classified as a ''thermoplastic'', and the name has to do with the way the plastic responds to heat. Thermoplastic materials become liquid at their melting point (155 degrees Celsius in the case of Polycarbonat). A major useful attribute about thermoplastics is that they can...

Thursday 20 August 2020

Quantité : 100-100000

Product characteristics 1. Aluminum plate surface dealing: Black Anodized/Clear Anodize/Polished/Deactivation/High-speed sandblasting/Superficial wiredrawing 2. Aluminium thickness: 0.5mm, 1mm,1,5mm 1.8mm,2mm, 3. Component: Screws, Nuts 4. Glue: 3M adhesive at the back - Cut out...

Thursday 20 August 2020

Quantité : 100-100000

What is PCB with Metal Dome Metal shrapnel (also known as pot or piece, metal dome, snap dome), made of ultra-thin (0.05mm-0.1mm thickness) and ultra-thick (usually high hardness) stainless steel 301 or 304 material. Metal dome is an important part of the dome switch pcb. They are...

Thursday 20 August 2020

Quantité : 100-100000

Product characteristics LGF is a thinner construction, without limited to devices thickness. LGF has a limited impact on the tactile feel of buttons. LGF can provide even backlight across larger and small areas. Reliability and long lifetime, Low-Cost Efficient power consumption and...

Thursday 20 August 2020

Categories of Commercial Carpets Nylon carpet is a new type of carpet use nylon as raw material and processed by a machine. Nylon printed carpet is outstanding in aesthetic, decorative, wear-resistance, and quick resilience after compression. Its high quality is especially reflected...

Thursday 20 August 2020

Prix : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 3/4" in diameter, 1/8" in thickness, with the pull force of 11.7 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Thursday 20 August 2020

Prix : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 10mm in diameter, 3mm in thickness, with the pull force of 3.45kg vertically. It is made from an alloy of neodymium, iron, and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Thursday 20 August 2020

Prix : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 3/4" in diameter, 1/8" in thickness, with the pull force of 9.76 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Thursday 20 August 2020

Prix : 0.01-100 USD/PCS

This powerful neodymium block magnet measures 1" in length, 1/4" in width, and 1/2" in thickness, with the pull force of 18.71 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection...

Thursday 20 August 2020

Prix : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 3/8" in diameter, 1/2" in thickness, with the pull force of 8.5lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Thursday 20 August 2020

Prix : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 1/2" in diameter, 1/16" in thickness, with the pull force of 3.84lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Thursday 20 August 2020

Prix : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 1/2" in diameter, 1/16" in thickness, with the pull force of 3.1lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Wednesday 19 August 2020

Flexible PCB is generally made of a flexible insulating substrate and is a flexible material that can be bent and flexed arbitrarily. FPC is favored for its lightweight, thin thickness, and free bending and folding. FPC is generally used in boards that need to be repeatedly flexed...

Wednesday 19 August 2020

Goldfinger is gold plated on the edge of the board. We have an automatic Goldfinger production line that can provide you with professional and fast Goldfinger PCB production. Insert one end of the PCB board into the connector card slot, and use the plug pins of the connector as the...

Wednesday 19 August 2020

SPEEDAPCB has been focusing on the production of various PTH (plated through hole PCB), buried via hole PCB and blind via hole PCB, and HDI PCB prototype. When it comes to blind and buried hole circuit boards, everyone thinks of HDI boards. Generally, there are more blind and buried...

Saturday 15 August 2020

Quantité : 200 units/ - Prix : 7200-28800 USD

Closed mechanical CNC turret punching machine by the programming software (or manual) processing program, by the servo feeding mechanism sent the plate material to the required processing position, at the same time by the die selection system select the appropriate die from the turret...

Saturday 15 August 2020

Quantité : 200 units/ - Prix : 7200-28800 USD

The driving system of the Y30 series cnc hydraulic punching machine, with low noise, high speed, and high efficiency, and the thickness of the punching plate is 6mm. The design of high precision and high repetitive positioning accuracy enables the machine to produce more high-precision...