Convertisseur catalytique nettoyage mécanique machine de soins de voiture

Technical Parameters:

Model No.: SYK-2000-II
Input Voltage: AC 220V
Rated Power: 4.0KW
Input air pressure: 0.6MPa
Steam pressure: 0.4MPa
Dimensions: 1170*520*545mm
Weight(kg): 85KG
Standard: CE


Product Feature and Characteristics:
Selling points

1) It is visible for the whole restoring process, the comparison can be seen before cleaning
and after cleaning.
2) No need to remove three-way catalyst and no harm to car.
3) The first manufacturer produces machine to clean three-way catalyst and reduce vehicle
exhaust, has no competition in market.
4) Compared with the old way of changing three-way catalyst, the cost decreased by 5 times.
5) It only takes 8 minutes for the whole restoring process, and effect is remarkable.


Treatment Effect:

1 - Function
Specialized cleaning three-way catalyst, also the oxygen sensor.

2 - Effects
1) Special cleaning fluid which cleans the carbon deposit is environmental friendly and will react with precious metals to produce harmless gas which can be discharged.
2) Effect is visible.
3) Three-way catalyst conversion rate has been improved more than 50%.
4) Restore power.
5) Save fuel from 8% to 10%.
6) Reduce vehicle exhaust emission and save back pressure.


Work Theory
Visible Three-way Catalytic Cleaning Machine is used in concert with our environmental-friendly clea ning fluid, it renews the three-way catalyst through two steps,
first normal temperature sweeping cleaning, and then high temperature steam cleaning. After the two steps, the efficiency of three-way can be restored to the original factory state, so as to re-duce t he vehicle exhaust.


When using Three-way Catalytic Reduction Machine?

If the car was happened in one of below situations,advise you to use this machine.
1) The effect of Three-way Catalytic converter was lowered,and automobile exhaust is out of limits.< br /> 2) Gasoline contains lots of sulfur and phosphorus. It form chemical complex on the surfaces
of oxygen sensor and three-way catalytic converter. If the gas does not burn enough,
the inadequate combustion products will adhered on the surface of three-way catalytic
Converter. The accumulated carbon and particulate matter will pollute the three-way catalytic
converter when curing nozzle, throttle,inlet.