CUCW-N142 Unitized Curtain Wall
Model No. CUCW-N142 is a self-designed, tested, and certificated unitized curtain walling system by CAS team. It is a cost efficient and performance unitised curtain wall system, which combines minimal aesthetics with structural stability. Its structural silicone glazing construction offers maximum transparency at the external surface of the facade. Modular units, including glazing panes, are prefabricated in workshop conditions and this results in a fast and economic installation with minimum manpower and tooling requirements. This construction mode, renders CUCW-N142 an ideal unitised system for high rise buildings,where meeting demanding deadlines is a prerequisite.
Overview of CUCW-N142 Unitized Curtain Wall
|
System |
Unitized Curtain Wall(Non-Thermal Break) |
|
Model No. |
CUCW-N142 |
|
Material |
Aluminum Alloy/Glass/Aluminum Sheet/Aluminum Composite Panel/Galvanized Sheet |
|
Glass Type |
Tempered/Float/Laminated/DGU/Ceramic Fritted/LowE/Tinted/Reflective/Heat Soak |
|
Cooperated Glass Brand |
Vitro(Formerly PPG)/Pilkington/Xinyi(SYG)/Yaopi(SYP)/Fuyao/Southglass(SG)/King/CNG/Ta iwanGlass |
|
Surface Treatment |
Powder Coating/PVDF/Anodized/Electrophoresis/Wooden Grain |
|
Profile Brand |
6063-T5/6063-T6/6061-T6(Brackets) |
|
Thermal Profile |
Non-Thermal Break |
|
Standards |
In Compliance With ASTM/AS/NZS/AAMA/NFRC/EN/BSI/ISO |
|
Application |
Residential Apartment, Villa/Commercial Hotel, Mall, Office, Public Organization |
|
System Customziation |
Available |
Data of CUCW-N142 Unitized Curtain Wall
Testing Data of CUCW-N142 Unitized Curtain Wall
|
Test |
Pressure |
Results |
|
Preloading(Clause 8.2.2 of AS/NZS4284: 2008) |
+1.46kpa |
No separation, plastic deformations, or deleteriousness was observed. |
|
-1.90kpa |
||
|
Preliminary Water Test under Static Pressure (Clause 8.2.3 of AS/NZS 4284: 2008) |
+438kPa |
There were no leaks. |
|
Preliminary Water Test under Cyclic Pressure (Clause 8.2.3 of AS/NZS 4284: 2008) |
219-438-219 (Pa) |
There were no leaks. |
|
292-584-292 (Pa) |
||
|
438-876-438 (Pa) |
||
|
Structural Test at Serviceability Limit State Wind Pressure (Walls)(Clause 8.3 of AS/NZS 4284: 2008) |
+1.46kpa |
During the structural test at SLS wind pressure, the deflections of all related members were within the allowable deflection limits. |
|
-1.90kpa |
||
|
Air Infiltration Test (Clause 8.4 of AS/NZS 4284: 2008) |
+/-150Pa |
The rate of air leakage of the specimen was within the allowable values. |
|
Water Test under Static Water Test under Static 4284: 2008) |
+438Pa |
There were no leaks. |
|
Water Test under Cyclic Pressure (Clause 8.6 of AS/NZS 4284: 2008) |
219-438-219 (Pa) |
There were no leaks. |
|
292-584-292 (Pa) |
||
|
438-876-438 (Pa) |
||
|
Structural ProofTest at Ultimate Limit State Wind Pressure (Wells) (Clause 8.8 of AS/NZS 4284: 2008) |
+2.26kpa |
No collapse of the test specimen was observed under the specified pressure. |
|
-2.94kpa |
||
|
Seal Degradation Test(Clause 8.10 of AS/NZS 4284: 2008) |
219-438-219 (Pa) |
No water leakage was observed. |
|
292-584-292 (Pa) |
||
|
438-876-438 (Pa) |
Thermal Data of CUCW-N142 Unitized Curtain Wall
|
NFRC Procedures |
NFRC100SB, NFRC200-2010, and NFRC500-2010 |
|
Software Tools |
THERM 7.4.3.0 and WINDOW 7.4.6.0 |
|
Configuration |
6 CLR-TDE33D 8mm HS #2 + 12AR + CLR 10mm HS IGU |
|
Panel Dimension |
1505mm Wide 2945mm High |
|
Frame |
Painted Aluminum |
|
Panel U-value |
2.765W/m2k |
|
Visible Light Transmission |
0.246 |
|
SHGC |
0.179 |
Frame Data of CUCW-N142 Unitized Curtain Wall
|
Parts Location |
Frame Area/m2 |
Edge Area/m2 |
U-Value(Frame) |
U-Value(Edge) |
|
W/m2k |
W/m2k |
|||
|
Header |
0.058 |
0.086 |
4.1858 |
1.1968 |
|
Left Jamb |
0.127 |
0.166 |
14.8377 |
1.6873 |
|
Right Jamb |
0.127 |
0.166 |
23.7685 |
1.9897 |
|
Sill |
0.328 |
0.086 |
5.7542 |
1.5668 |
Glass Data of CUCW-N142 Unitized Curtain Wall Manufacture
|
Glass Data: CLR-TDE33D 8mm HS #2 + 12AR + CLR 10mm HS IGU |
|||||||
|
Visible Light |
SHGC |
SC |
NFRC U-value |
STC |
|||
|
W/m3k(Argon) |
|||||||
|
T% |
R-out% |
R-in% |
Winter |
Summer |
|||
|
29 |
19 |
15 |
0.19 |
0.22 |
1.55 |
1.54 |
36 |
Benefit of CUCW-N142 Unitized Custom Curtain Wall
Guaranteed waterproofness & airtightness
Great quality control from factory
Lower on-site installation cost
Shorter project schedule
Enhancement of natural light
Increased static robustness, even in extreme natural phenomena
Minimum after sales service & maintaining
Increased comfort level
If you want to know more details of unitised system facade, please visit our website.
Personne à contacter : facade Cas, 0757 87655056
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
|
Cette page concerne les importateurs et exportateurs de CUCW-N142 Unitized Curtain Wall Rechercher dans la catégorie : Divers Rechercher dans la catégorie : wall, cucw, n142, curtain, unitized |
Wednesday 30 September 2015
Quantité : 50000 - Prix : depend de quantite
De grande qualité, agréable au toucher, légère, douce, Ultra-absorbante et sèche vite : Votre Fouta vous suivra partout, dans votre salle de bain, à la piscine, à la plage, sur le transat, le bateau ou en paréo, entourant les bébés, les enfants à la sortie du bain. Dans vos bagages...
artisanat Tunisien
- med.SGHAIER
- 5099 - Tunisia,Monastire
- +21 6 26 10 49 12
- 26104912
Wednesday 23 March 2016
BUBBLE FOOTBALL BUBBLE FOOTBALL SUITS ORDER-8 BALLS £1,160.00 SKU: ZS6 Bubble football is a game played by kids as well as grown-ups. It one of the most ridiculous fun games today. It is always fun when you bash into each other laughing yourselves out. As crazy as its name suggests...
bubble-football-uk
- EC1A 2BN - London
- 44 7470 016574
Wednesday 14 September 2016
Quantité : 5000 - Prix : 50,00 €
Gate Valves (F4 Type) DIN Standard F4 Gate valves / (Length acc.to DIN EN 558-1,face to face series 14 ) DIN F4 Gate valve DIN absperrschieber F4 DIN Válvulas de compuerta DIN F4 šoupátko stavební délka dle DIN EN558-1 serie 14 DIN Standard F4 sluseventil (lengde iht. DIN EN 558-1...)
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935





