Development System of BMC Rotor Mould
Prix : 100USD
At present, in the development process of BMC mold, the BMC composite material is thermosetting resin. In the process of mold heating and curing, because of the expansion performance of BMC material, the pressure in the mold cavity suddenly increases, which makes it difficult to demould the BMC products, and the products are difficult to separate from the mold. Especially some products with long straight surface can not separate from the mold, resulting in die scrap and product development failure.
The BMC Rotor Mold can successfully complete the production process. Compared with the existing technology, it has the following advantages: there is a long straight surface product in the BMC rotor moulding, so it can not be separated from the mold, and it can be used when it can not set a large demoulding slope on the product surface. In the process of mold locking, the lock insert is locked up and down through the lock surface, so that the insert will have a fully fitted balance state, and the fit between the insert and the middle sleeve plate will leave a large space for fit clearance, which effectively prevents the die expansion during the injection molding process. When opening the die, the lock surface is removed and the insert is peeled off from the product quickly, so that the ejection production process can be completed smoothly and the stability of the whole die can be further improved.
If you want to know more details of bulk molding compound process, please visit our website.
Personne à contacter : Li Coffee, +86 15657163173
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de Development System of BMC Rotor Mould Rechercher dans la catégorie : Divers Rechercher dans la catégorie : mould, development, rotor, system |
Jeudi 02 mai 2024
Two way LCD car alarm system with engine start module Detecting method Rechargeable Li-battery Window roll up control Long range monitoring www.autosmartelec.com Localisation : 1015 central, 519015 Hong Kong, Personne à contacter : Helen Loa, 867563885632
Autosmart Electronic Co., Limited
- 519015 - Hong Kong
- 867563885632
Samedi 04 mai 2024
Unitronics OPLC Jazz – Automate Control Engineering Ltd. (winston@automate-ace.com) Jazz™ : micro PLC with text-based HMI Replace that “smart relay” with a real PLC—for the same low price. Jazz™ is a full-function Programmable Logic Controller with onboard I/Os and a built-in Operator Panel...
Automate Control Engineering Ltd.
- automatehk
- 999077 - Hong Kong
- +85 2 23 42 72 76
Samedi 06 octobre 2012
Quantité : 6 - Prix : 0,00 €
Appareil d'entraînement pour le dos... votre thérapeute à domicile ! L'appareil développe un doux bercement rythmique circulaire continu du bassin, de l'avant vers l'arrière et d'un côté vers l'autre que l'on définit comme " Mouvement passif continu " qui permet de relâcher doucement...
WTC
- 57000 - METZ
- 06 51 05 50 33