Encapsulated adhesive for electronic equipment

Before The Curing

After The Curing

•20kg/set（A10kg+B10kg), packaging with bucket.

APPLICATION RANGE

APPLICATION RANGE

Widely used in various types of electronic components, play the role of heat conduction, fire retardant, waterproof.

Powr Equipment		Power Supply		Junction Box

Powr Equipment		Power Supply

PRODUCTION CHARACTERISTICS

PRODUCTION CHARACTERISTICS

Can be used in harsh environments for a long time The silicone sealant has the performance of superior high and low resistance, excellent insulation, high stability with thermal oxidation and ozone. It can be widely usesd in aerospace, automotive electronics, office equipment, construction and so on.

Effectively prolong the service life of electronic components Silicone sealant has superior thermal conduction and bonding property.it not only can fixed the electronic components, make heat transferring to the heat sink, to prevent overheating of electronic components to avoid resulting in break down, which can improve the service life.

WISE CHOOSE

OUR ADVANTAGE

Our company is committed to providing superior solution about

silicone rubber for customers，we have long-term cooperation with

many famous customers of industry and listed company.

	4 MAIN REASONS

GOOD THERMAL CONDUCTION Ensure a higher stability of power supply

	GOOD SELF-EXTINGUISHMENT Improve safety factor of power supply

			GOOD ADHESION Improve water-proof performance

	GOOD ANTI-AGING Resist the erosion of natural environment

METHOD OF OPERATION

INSTRUCTIONS

Preparing: Stir completely A and B in each container,
Mixing：A and B should be fully mixed according to the weighting ratio. Add B to A. Stirring(stir the glue dedicated blade) and mixing. Note that: should be mixed thoroughly when mixing the wall rubber of container into the plastic material.
De-airing: after mixing which should vacuum degassing for 1-3 minutes.
Potting: The mixture should be poured into the product as soon as possible, in order to avoid thickening and resulting in poor fluidity.

Curing: Heat curing or at room temperature curing. The higher the temperature, the quicker curing . The temperature is low, the curing time will be extended either. In winter, it will take a long time to cure, so suggest that heating curing. It is cured for 15 minutes at 80 ° C ~ 100 ° C, about 12 hours at room temperature.

MATTERS NEEDING ATTENTION

NOTE

1、The mixture should be sealed and stored in a dry environment at room temperature, and should be used as soon as possible, to avoid wastage.

2、The product don't belong to dangerous goods, but avoid contacting skin and eyes.

3、The product is non-toxic, has good physical inertia without stimulation and harm. The product does not contain flammable and explosive ingredients which will not cause fire or explosion without special requirement for transport.

4、Stored for a period of time, the plastic may be layered. So please stir well before using, and can't affect its performance.

5、The following substances may hinder the curing or cause the phenomenon of not cure, so it is used after simple experiments, and need to clean the site of application if necessary.

A, incompletely cured condensation type silicone rubber.

B.amine (amine) curable epoxy resin.

C. ash welding (solder-flux).

SPECIFICATION TRANSPORT

PACKAGING

1、20kg/set（A10kg+B10kg), packaging with bucket.

2、1 year shelf life if stored below 25 ℃, when the product passed its expiration date, it should be confirmed without abnormal phenomenon, then that can be used.

3、These products don't belong to dangerous goods, so they can be transported as normal chemicals. But be careful of leakage.