Friction Charging Tester
Friction Charging Tester is the antistatic fabric and knitted fabric friction generated by the amount of charged charge test equipment, used to measure the amount of static electricity charge.
Standards compliant:
JIS L-1094; JIS T-8118; ZB W 04008-89; GB / T12703.2-2009; GB 12014-2009; GB / T23316-2009
Calculation formula:
Q = CV / A
Here, C: the charge amount of the capacitor (F) = 0.1 × 10-6 (F)
V: Voltage reading of potentiometer (V)
A: friction area of sample (m2) = 0.25 × 0.25 (m2)
Steps:
1, connecting the Faraday tube and the amount of charge measurement device: the end of a dedicated cable connected with the input of the charge meter connected to the other end of the Faraday tube with the outer cylinder of the socket connection.
2, turn on the charge amount of the tester power - the power switch up to the "1" position.
3, press the "clear" button, so that the charge meter shows the number is zero.
4, with a roller friction machine friction test, immediately after the end of the friction with the insulation rods into the Faraday tube tube inside the tube. In this process the specimen and other objects should be kept above 300mm.
5. Read the reading on the charge quantity measuring device.
Friction Charging Tester Note:
- 1, the system of Faraday tube outer cylinder should be reliably grounded.
- 2. Clear the charge amount measurement unit before each measurement.
- 3, the measured object must be measured from the power supply.
- 4, before the test, please turn on the power switch to make the machine warm up for 15 minutes.
- 5, voltage / current generator is not to sell goods.
- Friction Charging Tester Main accessories:
Voltage meter (R8240): 1 set
Capacitor: 1 set
Cable (A01009-200): 1 root
Connection cable (A01009-50): 1 root
Power supply-type strip in addition to the electrode: 1 root
Friction abutment / ground pad (nylon friction cloth): 1 set
Insulated rods (20Φ x 500L mm acrylic clear fiber): 1 root
Certificate of proof of voltage meter (traceability): 1 book
Personne à contacter : Sun Qin, +86 21 6780 0179
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de Friction Charging Tester Rechercher dans la catégorie : Biens d'équipement Rechercher dans la catégorie : tester, charging, friction |
Mardi 23 avril 2024
Quantité : 1500000 to - Prix : 88 USD
Salut, Je viens par la présente solliciter un partenariat auprès de vous. En effet , représentant une entreprise tunisienne avec laquelle nous travaillons nous vous proposons du ciment en provenance d'Espagne de haute qualité et testé à 88 USD la tonne Dès le contrat de la commande...
groupe horizon
- 843 - abidjan
- +22 5 22 47 11 71
- +225 04619689/49875663
Vendredi 26 avril 2024
Quantité : 40000
Fabricant Tunisien spécialisé dans l'élaboration et la confection de la Fouta, la fameuse serviette utilisée à l'origine au hammam, nous vous proposons une large gamme de produits et divers coloris et motifs-vous sont proposés, se déclinant dans toutes les tailles. Les différentes...
ALL BY FOUTA
- Artisanat Tunisien
- 34430 - ST JEAN DE VEDAS
- 09 67 35 32 60
- 06 38 79 57 70
Lundi 29 avril 2024
Quantité : 12500 tonn - Prix : 74USD
Salut, Je viens par la présente solliciter un partenariat auprès de vous. En effet, représentant une entreprise tunisienne avec laquelle nous travaillons nous vous proposons du ciment de haute qualité et testé à 74 USD la tonne. Dès le contrat de la commande que vous souhaiteriez...
setecstra
- 843 - abidjan
- +22 5 49 87 56 63
- +225 04619689/498756