IEC60335-1 Clause 20.1 Appliance Inclined Plane Device

IEC60335-1 Electrical Stability Tester/Inclined Plane Device

Description:

This device is designed and manufactured in accordance with the IEC60335-1 clause 20.1. The Stability Tester is to determine the stability of electric appliances which are used on a table or on the floor. The device consists of a surface and an angle adjusting device, with angles 0~15° adjustable.
The appliance is placed in any normal position of use on a plane inclined at an angle of 10° to the horizontal, the supply cord resting on the inclined plane in the most unfavourable position. However, if part of an appliance comes into contact with the horizontal supporting surface when the appliance is tilted through an angle of 10°, the appliance is placed on a horizontal support and tilted in the most unfavourable direction through an angle of 10°.

Specifications:

Surface: WD-3: 1000mm, WD-2: 800mm, WD-1: 600mm

Angle Range: WD-3: 0-30° , WD-2: 0-30°, WD-1: 0-45°

Rotat Way: Hand-actuated/dynamoelectric