IG3112E 0.15-6KW Pure Sine Wave Inverter (150 watt pure sine wave inverter,150w pure si...)

IG3112E 0.15-6KW 150 watt pure sine wave inverter Key Features:

1. Pure Sine wave Output.
2.Low work noise, high efficiency.
3.Small, light and artistic, benefited from adopting the SMD pastern technology.
4.Featured with high reliability and low failure rate by using the advanced Double-CPU single chip intellectual control technology
5.Cooling fan is intellectual controlled, and its working status is controlled by CPU, which mostly increased its service life and helps to save the power consumption, improve work efficiency and lower the working noise.
6.With complete protection: overload protection, internal over-temperature protection, output short-circuit protection, input under-voltage protection, input over-voltage protection, etc, improving the reliability of the products greatly.

Customized to acce

DC input: DC36V,DC48V ,DC60V,DC72V,DC84V,DC96V,DC110V,DC120V,DC220V etc.
AC output: AC110V,AC120V,AC220V,AC230V,AC240V etc.
Power 300W 500W 800W 1500W 2000W 2500W 3000W 4000W 5000W 6000W 80000W etc.
Frequency : 50HZ or 60HZ
With LCD display etc.

SEO Article – An overview of the modified 150 watt pure sine wave inverter

Modified (or modified sine wave, sine wave, analog sine wave and so on) 150w pure sine wave inverter, the output waveform from the maximum positive value to negative maximum value between a time interval, the effect of improved, but modified sine wave is still composed of line, still belongs to the category of square wave, the continuity and dead zone exists.

The modified sine wave inverter is generally used for the non isolated coupling circuit, while the 150w pure sine wave inverter is designed by isolation and coupling circuit. Its price is also a lot of difference. Modified sine wave switching 150w pure sine wave inverter power supply, not only eliminates the cumbersome power frequency transformer, but also greatly improve the efficiency of the inverter 90%.

Modified sine wave switch mode inverter power supply with PWM mode generates a modified wave output, in the inversion process, due to the use of a specialized intelligent circuit and high power field effect tube, greatly reducing the power loss of the system. And the soft start function is added to ensure the reliability of the 150 watt pure sine wave inverter. If the power quality requirements are not very high. And it can meet the most demand for electrical equipment, but it still exists 20% of the harmonic distortion, the problems in the operation of precision equipment, also can cause high frequency interference to the communication equipment.