Injection Moulding Silicone Rubber for Baby Care Products

Product Specifications /Features

Specifications

Injection Moulding Silicone Rubber for Baby Care Products
Standard Datasheet
Item HY-923
Appearance Transparent
Mixing ratio 700
Viscosity (Pa.S) 1: 1
Density (g/cm3) 1.10
Hardness (A°) 50
Elongation at break (%) 450
Tear strength (KN/m) 35


Typical Prosperities and application:
HY-923 is an injection molding liquid silicone rubber for Baby care products such as Baby nipples, p acifier, toothbrush and other food grade injection products. They are elastomer cured under high tem perature, has the following excellent properties:
1>High transparency
2>Excellent tear Strength (>3.5KN/m)
3>Good resilience
4>Good heat stability and weatherability(temperature resistant range from -60℃ to 250℃)
5>Anti-yellowing
6>Heat-ageing resistance
7>Comply with USA CFR21.Part.177.2600 and Chapter 4.9 Test Standards for Volatile Compound of EN1435 0-2 and EU RoHS Standard


Specific usage:
HY-923 with 40~80 shore A is suitable for making Pacifiers/nipples for Babies whose age is from 1 mo nth to 1-year-old

Curing Condition:
After Mixed A with B according to mixing ratio of 1: 1,
150mm X 150mm X 2mm, mould will be formed in 7minutes under temperatuer of 150 ℃
Package: The general packages of HY-923 are 20kg or 200kg per barrel.

Notice:
After the component A and component B are mixed under the temperature of 20 ℃, the effective operati ng time is 5 days in sealing status, The effective operating time will shorten in case of rising tem perature.
The viscosity, hardness and appearance/color of above products can be adjusted according to customer 's specific requirements

Competitive Advantages

Well and High Quality Control ,
Prompt Delivery ,
New Product ,
Competitive Prices

Buyer Keywords
liquid silicone rubber/LSR for (making) baby nipples, injection (molding) silicone (rubber) for (mak ing) baby nipples

Product Specifications /Features

Specifications

Injection Moulding Silicone Rubber for Baby Care Products
Standard Datasheet
Item HY-923
Appearance Transparent
Mixing ratio 700
Viscosity (Pa.S) 1: 1
Density (g/cm3) 1.10
Hardness (A°) 50
Elongation at break (%) 450
Tear strength (KN/m) 35


Typical Prosperities and application:
HY-923 is an injection molding liquid silicone rubber for Baby care products such as Baby nipples, p acifier, toothbrush and other food grade injection products. They are elastomer cured under high tem perature, has the following excellent properties:
1>High transparency
2>Excellent tear Strength (>3.5KN/m)
3>Good resilience
4>Good heat stability and weatherability(temperature resistant range from -60℃ to 250℃)
5>Anti-yellowing
6>Heat-ageing resistance
7>Comply with USA CFR21.Part.177.2600 and Chapter 4.9 Test Standards for Volatile Compound of EN1435 0-2 and EU RoHS Standard


Specific usage:
HY-923 with 40~80 shore A is suitable for making Pacifiers/nipples for Babies whose age is from 1 mo nth to 1-year-old

Curing Condition:
After Mixed A with B according to mixing ratio of 1: 1,
150mm X 150mm X 2mm, mould will be formed in 7minutes under temperatuer of 150 ℃
Package: The general packages of HY-923 are 20kg or 200kg per barrel.

Notice:
After the component A and component B are mixed under the temperature of 20 ℃, the effective operati ng time is 5 days in sealing status, The effective operating time will shorten in case of rising tem perature.
The viscosity, hardness and appearance/color of above products can be adjusted according to customer 's specific requirements

Competitive Advantages

Well and High Quality Control ,
Prompt Delivery ,
New Product ,
Competitive Prices

Buyer Keywords
liquid silicone rubber/LSR for (making) baby nipples, injection (molding) silicone (rubber) for (mak ing) baby nipples