LH-80AB High Frequency Induction Heating Machine

• Fast heating speed: The workpiece can be heated within 1 second.
• Wide range of heating products: Induction heating can heat the entire metal; also it can heat a certain part of the metal.
• Easy to install: connect power supply, induction coil and water inlet and outlet pipe for use;
• The operation is easy: workers can learn in a few minutes.
• Quick start: start heating after water is connected and power is switched on.
• Less electric consumption: about 70% less than the old electronic tube high-frequency machine, the smaller the workpiece, the less electric consumption;
• Good heating performance: the heating is very uniform and fast, less oxidation, no waste after annealing;
• Protection: It is equipped with alarm indication, such as over voltage, over current, lack water and other alarm to control and protect the bearing heater automatically.
• Heating temperature is controlled: Induction heating can heat the metal to any certain temperature including the smelting point by control the heating time to satisfy the technology request.
• 100% loading: can work for 24 hours with no stop.
• Small size, light weight, saving plant space, well working econdition, environmental protection, no noise.
• Induction heating doesn't like other normal traditional heating method; it can produce heat directly from the metal itself.

Above specification is for reference only, exact specification will be based on the LIHUA lastest information.



web: http://www.lhinduction.com/products/lh-80ab-high-frequency-induction-heating-machine.html
company: Lihua Technology(HK) Industrial Co., Limited.
address: No.2 ,ZhuGang Road ,ShaTou, Chang'an Town,DongGuan City, GuangDong Province, China 523861