LIFT CHECK VALVES

Lift check valves refer to a valve that automatically opens and closes the valve flap by relying on the flow of the medium itself to prevent the backflow of the medium. The check valve is an automatic valve whose main function is to prevent the backflow of the medium, the reverse rotation of the pump and the driving motor, and the discharge of the medium in the container. Check valves can also be used on lines supplying auxiliary systems where pressure may rise above system pressure.

Types of Lift Check Valves for Sale

As lift check valves manufacturers in China, Mstnland provides kinds of lift type check valves for customers to choose from. Following is the lift check valve catalogue.

Internal Thread Lift Bottom Check ValveInternal Thread Lift Bottom Check Valve

Cast Iron Lift Check Valve

Vertical and Horizontal Bi-functional Check Valve

Cast Iron Ball Check Valve

Lift Check Valves Maintenance

1. Both ends of the lift check valve passage must be blocked, and it should be stored in a dry and ventilated room. If the lift check valve is stored for a long time, it should be checked frequently for corrosion prevention.

2. The lift check valve should be cleaned before installation, and the defects caused during transportation should be eliminated.

3. During the installation, it is necessary to carefully check whether the signs and nameplates on the lift check valve meet the requirements for use.

4. Do not make the lift check valve bear weight in the pipeline. The large check valve should be supported independently so that it will not be affected by the pressure generated by the piping system.

5. When the lift check valve is closed, water hammer pressure will be generated in the pipeline, and in severe cases, it will cause damage to the valve, pipeline or equipment, especially for large-mouth pipelines or high-pressure pipelines, so the check valve selectors should pay great attention to it.

As one of control valve manufacturers, we will do our best to meet all the needs of customers.