Liquid Silicone rubber for gypsum molds
Quantité : 8 Ton per Prix : 5.2-8.4usd/kg
Liquid Silicone rubber for gypsum applications
1. Liquid Silicone rubber can used for gypsum crafts, gypsum statues, gypsum ceiling rose, gypsum columns, gypsum line, gypsum ceiling board, and all kinds of gypsum decorations.
Liquid Silicone rubber for gypsum features
Liquid Silicone rubber is two part silicone with general hardness of 22-50 shore A after curing with features ----- -
(1)high tensile & tear strength
(2)high duplication times
(3)Low linear shrinkage
(4)resistance to high-temperature
(5)Low shrinkage and non-deformation
(6)resistance to acid-alkali and expansion
Liquid Silicone rubber for gypsum operation instructions
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3-5 minutes, otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated
Step Three: Pouring the mixture into the frame with original gypsum mold slowly
Shelf life for Liquid Silicone rubber
10~12months, when stored in a dry & cool place under the room temperature 25
Packing for Liquid Silicone rubber
1kg/ bottle, 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing 200 kg/drum
For more information, pls feel free to contact Ms harry
office no. : 0086-755-89948013
Mob: +8618938861896
Skype: smilingharry
Email: hyst(at)szrl(dot)net
Welcome to our website www dot szrl dot netLiquid Silicone rubber for gypsum applications
1. Liquid Silicone rubber can used for gypsum crafts, gypsum statues, gypsum ceiling rose, gypsum columns, gypsum line, gypsum ceiling board, and all kinds of gypsum decorations.
Liquid Silicone rubber for gypsum features
Liquid Silicone rubber is two part silicone with general hardness of 22-50 shore A after curing with features ----- -
(1)high tensile & tear strength
(2)high duplication times
(3)Low linear shrinkage
(4)resistance to high-temperature
(5)Low shrinkage and non-deformation
(6)resistance to acid-alkali and expansion
Liquid Silicone rubber for gypsum operation instructions
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3-5 minutes, otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated
Step Three: Pouring the mixture into the frame with original gypsum mold slowly
Shelf life for Liquid Silicone rubber
10~12months, when stored in a dry & cool place under the room temperature 25
Packing for Liquid Silicone rubber
1kg/ bottle, 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing 200 kg/drum
For more information, pls feel free to contact Ms harry
office no. : 0086-755-89948013
Mob: +8618938861896
Skype: smilingharry
Email: hyst(at)szrl(dot)net
Welcome to our website www dot szrl dot net
Personne à contacter : harry zhang, 86 755 89948013
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de Liquid Silicone rubber for gypsum molds Rechercher dans la catégorie : Matières premières Rechercher dans la catégorie : rubber, molds, liquid, gypsum, silicone |
Vendredi 18 novembre 2022
The melamine finish is similar to the plastic laminate on countertops, but the melamine polish is not as thick as the plastic laminate. The advantages of polish interior melamine polish door are its durable finish and its relatively low cost. HOLIKE MELAMINE POLISH INTERIOR DOOR IMAGES...
HOLIKE CREATIVE HOME Co.,Ltd
- 510665 - Tian
- 86 20 89311964
- No 18 Keyun Road, Tianhe distric
Vendredi 05 janvier 2024
Linen stainless steel linen finish has a textured surface that resembles linen fabric. This finish is achieved by pressing the steel sheet with a patterned roller. It is commonly used in architectural applications, such as wall coverings, elevator panels, and decorative accents. Specification...
Normandy Metal Industry Co., Ltd.
- normandymetal
- 528000 - foshan
- 0757 8870 0589
Jeudi 27 juillet 2023
In recent years, with the rapid development of die and mould industry, graphite materials, new processes and increasing die and mould factories are constantly impacting the die and mould market. Graphite has gradually become the preferred material for die and mould production with...
Pingdingshan Wanhui Graphite Co., LTD
- 467000 - Pingdingshan
- 0375 6506966
- 86 15539792960