Chine (Rép. pop) Biens d'équipement
Biens d'équipement

METAL FLANGING

Flanging refers to the stamping process of turning the edge or outer edge of the hole on the workpiece into an upright straight edge with a die. It is included in the forming process of stamping.

WHAT IS THE ADVANTAGE OF METAL FLANGING?

It can process precision stamping parts with complex shape and good rigidity.

Improve the production efficiency. Save dies for some deep drawing parts. Reduce the manufacturing cost.

It can replace the deep drawing work of a complex shape workpiece, so flanging is especially suitable for small batch trial production.

Flanging is usually applied at the edge of the stamping part, which can effectively save the material.

WHAT SHOULD BE CONCERNED IN METAL FLAGGING?

1. The flanging degree of inner hole of stamping parts shall not be too large at one time.

Flanging is a stamping method that turns the workpiece with holes punched in advance into vertical flange along the hole edge. The deformation of hole flanging is from the tensile deformation of the material along the tangential direction, and the closer to the edges, the greater the deformation and the flanged area of workpiece gets thinner. Due to that, the hole edge may be cracked if not dealt properly. In order to prevent the cracking, the flanging degree of the inner hole of the workpiece must not be too large. If the flanging height is large, we can process flanging several times instead.

2. The flanging coefficient of punching flanging shall not be too small.

In flanging, the deformation degree is expressed by cofficient "K", which is the ratio of the aperture before flanging to the aperture after flanging. Obviously, the larger the value of K, the smaller the degree of deformation. On contrary, the smaller the value of K, the greater the degree of deformation, and more likely the edge of the flanging hole will be broken. The minimum value of K occurs with the maximum deformation degree which can be achieved without cracking the hole edge.

In order to prevent edge cracking, K shall not be too small and shall be greater than the minimum value introduced above. Experience shows that the minimum value of K is not only related to the type and performance of the material, but also to the relative thickness of the blank, and the shape of the product.

If you need any kinds of metal work fabrication, please contact us, as a professional metalworking factory, Hongkun is willing to offer you high quality products.

Localisation : No.11-1, Yecun Road, Sanshan District, Wuhu City, Anhui Province, China., 241080 hunkmachining,
Personne à contacter : com hunkmachining, 0553 2861635

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
METAL FLANGING

Rechercher dans la catégorie : Biens d'équipement
Rechercher dans la catégorie :
flanging, metal
France 17110 Artisanat
SANZAS CARIMBAS

Lundi 25 mars 2013

Quantité : 12 - Prix : 62,00 €

Importateur vends lots de sanzas ou carimbas : diamètre 12 cm touches métalliques face bois exotique fond demi noix de coco . Très bonne sonorité. Vendus par lot de 25 pièces : 62,50 € le lot, soit 2,50 € la pièce. Minimum d'achat un lot. Si cette proposition vous plait, il suffit...

OUTRE MERS

  • outremers
  • 17110 - SAINT GEORGES DE DIDONNE
  • +33 6 81 16 68 53
Thailande 50000 Alimentaire
Frozen Green Asparagus with Good Price Best 2016 New Crop

Mercredi 17 février 2016

Quantité : 3000MT - Prix : $350/MT/CIF

Product Details: Product: Green Asparagus Color: Fresh green Standard: Grade A Size: Length: 15cm Dia: 8-10mm/10-16mm/16-22mm Length: 17cm Dia: 8-10mm/10-16mm/16-22mm Or cut according to custome's requirements Package: 1kg/bag 10kg/carton or according to custome's requirements MOQ...

KHUN JACK PARTNERSHIP LIMITED

  • 50000 - CHIANG MAI
  • +66 9 56 19 49 81
France 255086 Matières premières
JC-Paper Series Refractory ceramic fiber paper sealing gasket

Mardi 16 juin 2015

Quantité : 100 roll

JC-Paper Series Refractory ceramic fiber paper sealing gasket Product Description: The ceramic fiber paper is manufactured by refractory fiber with high purity which is used in high-temperature insulating fields. The advance manufacturing technology makes the distribution of ...

Zibo JC Eco-Tech Co., Ltd

  • 255086 - China
  • +86 15505335058
  • +86 533 3593322