NOx Converter

1. Introduction

NOx gas converter is used for the application that using NO gas analyzer to measure NO2 or NOx. It can convert NO2 to NO in the air or from the stack. This is an optional equipment used before NO gas analyzer, which can got NOx (NO+NO2) value by converting NO2 to NO.

2. Features

High conversion rate under low temperature.

Up to 300ppm NO2 switching capacity

A long lifespan

The patented conversion tube structure

Micro processing controller intelligent temperature control

The temperature can be adjusted freely

With the temperature alarm

With the LED display

19 "rack enclosure and wall-mounted type optional

Easy for replacement of special switching tube design

3. Specifications

Working temperature: 365℃

Prewarming time: 30 minutes

Sample gas pressure: 1.5bar

Sample gas flow rate: 120L/h

Sample gas temperature: 5-80℃

Dew point: <10 C </span>

Environment temperature: 5-50℃

Storage and transportation temperature: -20 - 70℃

Relative humidity: <80%RH </span>

Power supply: 220VAC, 50/60Hz

Power consumption: about 400W

Eack installation: 19 ", 3U or wall-mounted (different type)

Weight: about 5.5Kg

The protection grade: IP20

The conversion efficiency >95% (new conversion tube)

The conversion tube service life: more than 12 months, depending on the concentration of NO2

The maximum capacity: 300ppm (flow 60L/h)

1. Introduction

NOx gas converter is used for the application that using NO gas analyzer to measure NO2 or NOx. It can convert NO2 to NO in the air or from the stack. This is an optional equipment used before NO gas analyzer, which can got NOx (NO+NO2) value by converting NO2 to NO.

2. Features

High conversion rate under low temperature.

Up to 300ppm NO2 switching capacity

A long lifespan

The patented conversion tube structure

Micro processing controller intelligent temperature control

The temperature can be adjusted freely

With the temperature alarm

With the LED display

19 "rack enclosure and wall-mounted type optional

Easy for replacement of special switching tube design

3. Specifications

Working temperature: 365℃

Prewarming time: 30 minutes

Sample gas pressure: 1.5bar

Sample gas flow rate: 120L/h

Sample gas temperature: 5-80℃

Dew point: <10 C </span>

Environment temperature: 5-50℃

Storage and transportation temperature: -20 - 70℃

Relative humidity: <80%RH </span>

Power supply: 220VAC, 50/60Hz

Power consumption: about 400W

Eack installation: 19 ", 3U or wall-mounted (different type)

Weight: about 5.5Kg

The protection grade: IP20

The conversion efficiency >95% (new conversion tube)

The conversion tube service life: more than 12 months, depending on the concentration of NO2

The maximum capacity: 300ppm (flow 60L/h)