Algomtl
svgfair.com
 
O RING MECHANICAL SEALS
Détails
Chine (Rép. pop) Habillement Femme
Habillement Femme

O RING MECHANICAL SEALS

O-rings are one of the most frequently used products in sealing applications, relatively inexpensive and reliable. O-rings come in many styles and shapes. The material required depends on temperature, pressure, chemical, and other environmental factors. Materials such as EPDM, Nitrile, Buna-N, Viton, FFKM are the most common materials that we supply. Applications range from garden hose couplings to critical aerospace or chemical plant duties.
Types of O Ring Mechanical Seal for Sale
As a china o ring supplier, we supply all standard types of materials in a range of Shore Hardnesses and colours. In addition to standard imperial and metric sizes, Sealcon also supply a wide variety of non-standard sizes. Please feel free to inquire us if you need any O-rings. Materials include; Nitrile, Silicone, EPDM, FKM, Viton, FFKM, and HNBR.
Application of O Seal Ring Mechanical
O-ring is mainly used in the fluid static application (For example, water, oil, air, chemicals solvent, chemicals, etc.).
The temperature range is from -60 ℃ up to 220 ℃.
The pressure in the static application should be less than 20MPa, which varies with different materials.
Sometimes O-ring is used in the dynamic application with the pressure less than 5MPa and also used in semiconductor vacuum seal.
Advantages of O Ring Mechanical Seals
Cost-effective
Reliable
Versatile
O Ring Seal Material
O-rings come in many styles and shapes. The o ring seal material required depends on temperature, pressure, chemical, and other environmental factors. The o ring material selection such as EPDM, Nitrile, Buna-N, Viton, FFKM are the most common materials that we supply. Applications range from garden hose couplings to critical aerospace or chemical plant duties.
Common Elastomer Materials of O Mechanical Seal Pumping Ring
Buna-N(NBR)
Buna-nitrile is the most common elastomer used in mechanical seals. Depending on the exact compound, Buna is good for moderate temperatures, from about -35 °F to about 250 °F. Buna's chemical resistance is narrow, and it is used mostly for water-based applications. Buna is the lowest cost elastomer used in mechanical seals.
Fluoroelastomer (Viton/FKM)
Fluoroelastomers (Viton) offer the best all-around chemical resistance value for mechanical seal applications. Fluoroelastomers can be used at continuous temperatures up to 400 °F. There are some applications — such as steam — and some specific chemicals — such as organic acids and ketones — where EPDM or Kalrez® are specified. While much more expensive than Buna, Viton is still moderately priced.
Ethylene Propylene(EPDM)
Ethylene propylene (EPDM) offers outstanding performance in steam and hot water. There are also specific chemical applications where EPDM is the best choice. EPDM is recommended for use up to 300 °F. EPDM is often priced between Buna and Viton.
Perfluorocarbon (FFKM)
FFKM offers excellent resistance to chemicals and extreme temperatures. Special compounds can operate beyond 300°C. FFKM is resistant to most chemicals including inorganic acids, alkalines, ketones, esters, s, fuels, and hot water. It is ideal for applications in aggressive chemical environments.Our Standard FFKM compound has outstanding heat resistance with service temperatures of -10°C to 310°C. Hangzhou Sealcon Fluid Machinery Co., Ltd can offer direct equivalents to Kalrez, Simrez, Perlast, Chemraz, grades.

Aflas

Aflas is a specialty, non-conventional fluoroelastomer. A cousin of Viton, it offers higher heat resistance and performs well in high concentrations of acids, oxidants, and alkalis. Aflas is usually somewhat more expensive than Viton.

Kalrez

Kalrez is usually the most expensive elastomer option available. With specialty compounds available for use with nearly any chemical, and the ability to withstand temperatures up to 600 °F, Kalrez is an amazing elastomer. O-rings often cost hundreds of dollars each, so Kalrez is only used where absolutely necessary.

Specialty Elastomers

There are a variety of specialty elastomers on the market, most of which compete with one of the above materials. Sometimes these are specified by a seal or pump OEM, and Infinity Pump can source these materials for you.

We can offer kinds of china rubber seal for sale, if you have needs, please contact us.

Localisation : A1-3-603 xixi center, wenyi west road, xihu district, Hangzhou, 310012 Xixi,
Personne à contacter : Michael Yu, +86 571 86958675

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
O RING MECHANICAL SEALS

Rechercher dans la catégorie : Habillement Femme
Rechercher dans la catégorie :
seals, mechanical, ring
Thailande 10150 Alimentaire
Raffiné canne blanche Icumsa 45 sucre en sacs de 50 kg et 25 kg

Wednesday 23 December 2015

Quantité : 2000 Metri - Prix : $250/mt CIF

ICUMSA 45 is a highly refined sugar, and it is easily recognizable by its distinctive sparkling white color and pure Sucrose taste. It is suitable for human consumption and use in a wide range of food applications. It is perpetually in high demand as it is the safest form of sugar...

Khun Jack Partnership Limited

  • 10150 - chaing Mai
  • +66 9 56 19 49 81
France 59590 Pro / B2B
Robinet à soupape - Corps Acier à soufflet Inox

Wednesday 14 September 2016

Quantité : 5000 - Prix : 50,00 €

Corps Acier A216 WCB & GS-C25 & 1.0619 & GP240GH - Clapet Inox 420 - Siège Inox 420 - Soufflet Inox 321 - Presse étoupe Graphite Tige et volant montants tournants - Chapeau et presse étoupe boulonnés - A brides RF PN16/ PN25/40 - Commande par volant fonte - Peinture...

ETM Armaturen

  • 59590 - Henri Durre
  • 86 577 67953935
Hongrie 1055 Alimentaire
Le lait entier en poudre / poudre de lait écrémé

Saturday 13 June 2015

Quantité : per ton - Prix : 500-900

Le lait entier en poudre / poudre de lait écrémé Analyse de la composition TYPIQUE Les résultats de l'analyse figurant dans le présent bulletin de produit sont typiques telle que mesurée sur un «tel quel». Reportez-vous à la spécification de vente de limites minimales et maximales...

beckeyfarm

  • 1055 - Budapest
  • +36 3 05 80 38 37
 

Paiement sécurisé

Paiement sécurisé

Informations

Les plus recherchés