PA6 GF45 (A1011I)
Polyamide 6 reinforced with 45% Glass Fibers that is PA GF45, medium viscosity and dimensional stability, this material pa 6 has excellent rigidity and high tensile and compressive strength successfully applying to engineering structure parts of mechanical engineering and in the automotive industry.
Typical Application of PA6 GF45 (A1011I)
PA6 GF45 is used in turbines, propellers, screws, nuts, washers and other components with high rigidity and dimensional stability and heat-resistant aging, as well as fishing tackle reels, racket frames and other components with high mechanical strength, good toughness, higher tensile and compressive strength.
Other Details of PA6 GF45 (A1011I)
Physical Property
|
Ash |
(15.0% 1 ISO3451/1) |
|
Conditioned |
600°C*2h |
|
Density |
(1250Kg/m3 1 ISO1183) |
|
Conditioned |
23°C |
|
Shrinkage Parallel Flow |
(0.5-0.7 % 1 ISO294-4) |
|
Shrinkage Vertical Flow |
(0.7-1.1% I ISO294-4) |
Mechanical Properties
|
Tensile strength (125.0MPa 1 ISO527) Conditioned |
5mm/ min |
|
Tensile Strain at Break (2.5% I ISO527) Conditioned |
1.0J |
|
Notched Impact Strength (125 0MPa I ISO527) Conditioned |
2mm/min |
|
Flexural Strength (190MPa 1ISO178) Conditioned |
2mm/min |
|
Flexural Modulus (5700 MPa I ISO178) Conditioned |
5mm/ min |
Thermal Property
|
Melting Point |
(220°C I ISO11357) |
|
Hot Deformation Temperature |
(175*C I ISO75) |
|
Conditioned |
1.8MPa |
|
Flammability Class |
(HB 1UL94) |
|
Conditioned |
mm |
Injection Molding Conditions
|
Drying Temperature |
130°C |
|
Drying Time |
3h |
|
Cylinder Temperature |
240-260°C |
|
Nozzle Temperature |
240-260*C |
|
Tooling Temperature |
80*C |
* Molding conditions are just for reference, please make an adjustment based on the actual situation!
As one of engineering plastic manufacturers, Anmei provides pa6 plastic material, modified polyolefin, master batches and etc. For more information, please feel free to contact us!
Personne à contacter : DAN XU, 86 0512 63012966
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
|
Cette page concerne les importateurs et exportateurs de PA6 GF45 (A1011I) Rechercher dans la catégorie : Pro / B2B Rechercher dans la catégorie : a1011i, gf45 |
Tuesday 29 October 2013
Quantité : 1 - Prix : 450 000
Vends d'occasion: 1 ligne complète pour fabriquer des granulés de bois (pellet) et buches de bois densifié. Production : 3 Tonnes Heure. - Marque Klöckner - Matériel à travailler 3 ans est en parfait état. - Matériel encore installé. 1- Arrivée de la matière première soit en...
Saturday 11 July 2015
Quantité : 100 - Prix : $45
Caractéristiques: 1. Une . Épaisseur 10mm , super mince ; 2 . Type d'installation: intégré / suspendu 3 . Sablage argent brillant pour 10mm série de thichness ; 4 . Importé plaque de diffusion Corée , de transmission jusqu'à 93 % ; 5 . 0.2W 2835 LED , haute efficacité lumineuse ...
Sinpco Optoelectronic Co.Ltd
- 518100 - Shenzhen
- 8613530366710
Tuesday 26 May 2015
Quantité : 200 tonnes - Prix : 200,00 €
Nous fabriquons la meilleure litière pour animaux sur le marché. Utilisant un séchoir de très haute qualité ,nous pouvons contrôler le taux d'humidité de façon continue, entre 10% et 12% d'humidité. Notre séchoir, ayant une température variant entre 200° et 500° , élimine toute...
Bois Plus SARL
- 4054 - Sousse
- +21 6 28 12 83 62
Paiement sécurisé





