PCB / Electronic Component Dismantling Machine

PCB / Electronic Component Dismantling Machine

Application domain:

Recycling of electronic waste

Applicable material:

It is suitable for all kinds of electronic waste and PCB, such as mobile boards, TV panels, computer boards, washing machines, old fridge panels, FPC flexible circuit boards, etc. It is mainly used in PCB Recycling Plant

Working principle:

Using the nature gas as the heat, the tin will be loose when temperature is up to 200-300⁰C. When the roller works, electronic components will be separated because of the scraping function between PCB. So we can dismantle electronic components from PCB mother board. If users want to classify them clearly, then you can equipped it with electronic components screen and magnetic machine.

Operation method:

1. Check weather the electricity has been installed.
2. Open the lid of the inner cylinder, put electronic components into it, the amount should be eighty percent of the volume of the cylinder, then close lid.
3. Adjust temperature controller to 130℃(The maximum can be adjusted to 200℃, users should adjust the temperature according to the electronic component).
4. Switch on the machine(Rotating switch, normally open switch, vibration switch).
5. After working for about 15-25 minutes, observe whether the electronic components are falling down or not. When they are almost finished, adjust temperature controller to 0℃, but let the machine work 5 minutes more insteadof switching off it.
6. After 5 minutes, turn off the rotating switch, open the outer and inner cylinder cover, keep the inner cover opening, then close the outer cover. When the rotating switch is turned on, the board will drop out automatically.
7. Check whether the PCB after dismantling is removed totally, is there any electronic component or tin that has not been removed. If no, please increase the temperature when the second dismantling, and the time should be longer.