PCD & PCBN
Quantité : 6kg Prix : 0.025$
PCD material for Cutting Tools
E-Grind supplies the whole range of PCD blanks for cutting tool purpose. The largest Diameter available can be 55mm. Our PCD provides high wearing resistance ability and high finishing surface.
Our plant installs laser cutting machines and surface lapping and finishing machines to provide full service for PCD. With advanced inspecting machines of SEM, C-SCAN, X-Ray Diffractometer etc. Our plant applies strict Quality Control process.
PCD application:
Non-ferrous metals and alloys: Aluminum/gray iron composite, copper, Aluminum...
nonmetallic materials: ceramics, plastic, rubber, chipboard...
PCBN
PCBN consists of CBN and Binder. It is produced in high pressure and high temperature. It has excellent performance in hardness, wearing resistance, thermal stability.
Application: for hard ferrous materials (hardened steel, cast iron, high-temperature alloy, HSS, Powder metallurgy metals, Ni-Cr alloy...
E-Grind provides two series of PCBN:
1)Solid CBN
2)CBN with Tungsten Carbide supporting.
Grade |
CBN grit(μm) |
CBN content (Vol%) |
Processing way |
Application |
B-C6Z1 PCBN-C6Z1 |
20, 30 |
95% |
Continuous cutting with large stock removal |
For Rough processing Grey Cast Iron, Chilled Cast Iron, Powder Sintered Alloy. |
B-C5Z0 PCBN-C5Z0 |
10, 15 |
90% |
Continuous cutting with large stock removal |
For Rough process and semi-finishing processing the wear resistant cast iron, nodular cast iron etc. |
B-C5Z2 PCBN-C5Z2 |
10, 15 |
90% |
Continuous cutting with large stock removal |
For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome i ron and chilled steel with hardness HRC45-50. |
B-C4G0 |
3, 5 |
80% |
Continuous cutting with Medium stock removal |
For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome i ron and chilled steel with hardness HRC45-50. |
B-C3G0 PCBN-C3G0 |
3, 5 |
70% |
Continuous cutting with small stock removal |
For finishing the chilled steel and high-temperature alloy with HRC45-55. |
B-C2G0 |
1, 3 |
60% |
Continuous cutting with small stock removal |
For finishing and super-finishing the chilled steel with HRC55-62 like bearing steel, tool steel, mold steel, gauge steel, and HSS. |
B-C1G1 PCBN-C1G1 |
1, 3 |
55% |
Slight non-continuous and continuous cutting with small stock removal< /p> |
For Finishing and super-finishing the chilled steel with HRC55-65, like bearing steel, tool steel, mold steel, gauge steel, and HSS. |
PCBN disc
SPEC |
D (Diameter) (mm) |
T (Thickness) (mm) |
t (CBN section thickness ) (mm_ |
PCBN-C1G1 |
PCBN-C3G0 |
PCBN-C5Z0 |
PCBN-C5Z2 |
PCBN-C6Z1 |
Ф45×1.2×0.6 |
45 |
1.2±0.05 |
0.5-0.8 |
√ |
√ |
√ |
√ |
√ |
Ф45×1.6×1.0 |
45 |
1.6±0.05 |
0.9-1.2 |
√ |
√ |
√ |
√ |
√ |
Ф45×3.2×1.0 |
45 |
3.2±0.05 |
0.9-1.2 |
√ |
√ |
√ |
√ |
√ |
Ф45×3.8×1.0 |
45 |
3.8±0.05 |
0.9-1.2 |
√ |
√ |
√ |
√ |
√ |
Ф45×4.5×1.0 |
45 |
4.5±0.05 |
0.9-1.2 |
√ |
√ |
√ |
√ |
√ |
Ф55×1.6×1.0 |
55 |
1.6±0.05 |
0.9-1.2 |
√ |
√ |
√ |
√ |
√ |
Ф55×3.2×1.0 |
55 |
3.2±0.05 |
0.9-1.2 |
√ |
√ |
√ |
√ |
√ |
Ф55×3.8×1.0 |
55 |
3.8±0.05 |
0.9-1.2 |
√ |
√ |
√ |
√ |
√ |
Ф55×4.5×1.0 |
55 |
4.5±0.05 |
0.9-1.2 |
√ |
√ |
√ |
√ |
√ |
Sold PCBN
Shape |
Spec |
Dimension |
Standard |
Code |
||||||||
L |
Фd |
S |
EBNC1C1 |
EBNC2C |
EBNC3C |
EBNC4C |
EBNC5B |
EBNC5B2 |
EBNC6B1 |
|||
Square |
9.85×3.4 |
9.85 |
9.85 |
3.4 |
SNMN090300 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
Square |
9.85×5 |
9.85 |
9.85 |
5 |
SNMN090400 |
√ |
√ |
<spa |
Personne à contacter : Liu Locke, 0371 68616868
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de PCD & PCBN Rechercher dans la catégorie : Biens d'équipement Rechercher dans la catégorie : pcbn |
Mercredi 14 septembre 2016
Quantité : 5000 - Prix : 50,00 €
Corps Acier A216 WCB & GS-C25 & 1.0619 & GP240GH - Clapet Inox 420 - Siège Inox 420 - Soufflet Inox 321 - Presse étoupe Graphite Tige et volant montants tournants - Chapeau et presse étoupe boulonnés - A brides RF PN16/ PN25/40 - Commande par volant fonte - Peinture...
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935
Mardi 11 août 2015
Prix : 1$ ~30 $
One Lus International is a professional bike & motorbike lock manufacturer in Taiwan and provides a series of security padlock to meet customer's needs. The utility padlock is made of bolt cropper and hacksaw-resistant locks with an integral 5-disc locking mechanism. With a dia...
One Lus International Co., Ltd.
- onelusinter
- 833 - Kaohsiung City
- +88 6 77 32 85 66
Mercredi 14 septembre 2016
Quantité : 5000 - Prix : 50,00 €
Gate Valves (F4 Type) DIN Standard F4 Gate valves / (Length acc.to DIN EN 558-1,face to face series 14 ) DIN F4 Gate valve DIN absperrschieber F4 DIN Válvulas de compuerta DIN F4 šoupátko stavební délka dle DIN EN558-1 serie 14 DIN Standard F4 sluseventil (lengde iht. DIN EN 558-1...)
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935